Emre Gümüş
Emre Gümüş has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Bünyamin Çiçek
Hitit University
1 shared publication - Emin Arca
Faculty of Engineering, Marmara University, 34722 Istanbul, Turkey
1 shared publication - Emine Gündoğdu İş
Shipbuilding Program, Maritime Vocational School, Piri Reis University, Tuzla, Istanbul 34940, Turkey
1 shared publication - Mustafa Yağımlı
İstanbul Gedik Üniversitesi
1 shared publication - Polat Topuz
ISTANBUL GEDIK UNIVERSITY, GEDİK VOCATIONAL SCHOOL
1 shared publication - Çiğdem Yarış
ISTANBUL GEDIK UNIVERSITY, GEDİK VOCATIONAL SCHOOL
1 shared publication
Latest Publications
DETERMINATION OF INDIVIDUAL NOISE EXPOSURE LEVEL IN MOTORCYCLE COURIERS
This paper presents an attempt to measure individual exposure to noise of motorcycle couriers working in Istanbul under real working conditions. Noise measurements were done by using the MIRE technique according to the ISO 11904-1 standard along three chosen routes. Results indicate that frequently the exposure to noise exceeded the maximum limits and reaches an adjusted Leq of 86.84 dBA for the route with the highest risk. On other routes, exposure remains close to the limit. Sources of noise were from engine noises, turbulence caused by wind, and urban traffic flow. It highlighted that frequencies between 100 Hz and 1,000 Hz provide the highest contribution. Considering high levels of exposure to this, it may increase the risk of hearing impairment among motorcycle couriers; hence, strategies for mitigation through improved design of helmets, noise-reducing technologies, and policy interventions become mandatory. This paper highlights the need for protection measures with a view ensuring the auditory health of motorcycle couriers is safeguarded, particularly in the context of metropolitan cities. It includes recommendations for routine auditory health assessments, optimized delivery routes, and increased awareness of occupational noise risks.
DETERMINATION OF INDIVIDUAL NOISE EXPOSURE LEVEL IN MOTORCYCLE COURIERS
This paper presents an attempt to measure individual exposure to noise of motorcycle couriers working in Istanbul under real working conditions. Noise measurements were done by using the MIRE technique according to the ISO 11904-1 standard along three chosen routes. Results indicate that frequently the exposure to noise exceeded the maximum limits and reaches an adjusted Leq of 86.84 dBA for the route with the highest risk. On other routes, exposure remains close to the limit. Sources of noise were from engine noises, turbulence caused by wind, and urban traffic flow. It highlighted that frequencies between 100 Hz and 1,000 Hz provide the highest contribution. Considering high levels of exposure to this, it may increase the risk of hearing impairment among motorcycle couriers; hence, strategies for mitigation through improved design of helmets, noise-reducing technologies, and policy interventions become mandatory. This paper highlights the need for protection measures with a view ensuring the auditory health of motorcycle couriers is safeguarded, particularly in the context of metropolitan cities. It includes recommendations for routine auditory health assessments, optimized delivery routes, and increased awareness of occupational noise risks.
- Open Access
- 2 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (15) , 8893
Investigation of the Dielectric Properties of Graphite and Carbon Black-Filled Composites as Electromagnetic Interference Shielding Coatings
The main purpose of electromagnetic interference (EMI) shielding coatings is the insulation of sensitive devices and protect people from electromagnetic field exposure due to its effects on the human body. This paper investigates the dielectric properties, and electromagnetic shielding performances of graphite and carbon black (CB) filled epoxy matrix composites produced by the mechanical mixing method. The sample compositions were created at rates ranging from 1 to 7 wt%. Samples were analyzed by Vector Network Analyzer (VNA) using the coaxial method in the range of 1–14 GHz, including L band, S band, C band, X band and partially Ku band. After determining the scattering parameters with VNA, AC conductivity, absorption, reflection and total shielding efficiency values were calculated. At high frequencies, almost all the samples showed higher AC conductivity. CB-filled samples show higher AC conductivity than graphite-filled samples. The total shielding efficiency (SET) of the graphite-added samples (19–21 dB) is slightly higher than the carbon black-added samples (8–17 dB). Distinct filling ratios in graphite-added samples result in closer shielding behavior in contrast to carbon black-added samples. However, higher shielding efficiency is observed as the CB filler ratio increases. The shielding efficiencies of the samples with both types of filling materials vary little depending on the frequency. Reflection is the main mechanism of the shielding efficiency, which constitutes the majority of total efficiency for all types of samples.
- 2 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (15) , 8893
Open AccessInvestigation of the Dielectric Properties of Graphite and Carbon Black-Filled Composites as Electromagnetic Interference Shielding Coatings
The main purpose of electromagnetic interference (EMI) shielding coatings is the insulation of sensitive devices and protect people from electromagnetic field exposure due to its effects on the human body. This paper investigates the dielectric properties, and electromagnetic shielding performances of graphite and carbon black (CB) filled epoxy matrix composites produced by the mechanical mixing method. The sample compositions were created at rates ranging from 1 to 7 wt%. Samples were analyzed by Vector Network Analyzer (VNA) using the coaxial method in the range of 1–14 GHz, including L band, S band, C band, X band and partially Ku band. After determining the scattering parameters with VNA, AC conductivity, absorption, reflection and total shielding efficiency values were calculated. At high frequencies, almost all the samples showed higher AC conductivity. CB-filled samples show higher AC conductivity than graphite-filled samples. The total shielding efficiency (SET) of the graphite-added samples (19–21 dB) is slightly higher than the carbon black-added samples (8–17 dB). Distinct filling ratios in graphite-added samples result in closer shielding behavior in contrast to carbon black-added samples. However, higher shielding efficiency is observed as the CB filler ratio increases. The shielding efficiencies of the samples with both types of filling materials vary little depending on the frequency. Reflection is the main mechanism of the shielding efficiency, which constitutes the majority of total efficiency for all types of samples.
- Open Access
- 1 January 2017
- Published by Hitit University in Hittite Journal of Science and Engineering
The Effect of Welding Positions on the Weldability of X20CrMoV11-1 Steels
The Welding Science of X20CrMoV11-1 Steels Depending on Various Welding Positions
- 1 January 2017
- Published by Hitit University in Hittite Journal of Science and Engineering
Open AccessThe Effect of Welding Positions on the Weldability of X20CrMoV11-1 Steels
The Welding Science of X20CrMoV11-1 Steels Depending on Various Welding Positions