Delphin Dodane
Delphin Dodane has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Jerome Bourderionnet
Physics Department, Thales Research and Technology, Palaiseau, France France
4 shared publications - Simon Rommel
Eindhoven University of Technology
4 shared publications - Idelfonso Tafur Monroy
Eindhoven University of Technology, Eindhoven, Netherlands
3 shared publications - Alfredo De Rossi
Thales Research and Technology
2 shared publications - Alvaro Morales
Technical University of Denmark, Denmark
2 shared publications - Antonio Jurado-Navas
Telecommunications Research Institute (TELMA), Universidad de Malaga, 29071 Malaga, Spain
2 shared publications
Latest Publications
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Boucles à verrouillage de phase optique pour la génération de signaux hyperfréquences en bande 5G
L’un des principaux verrous technologiques inhérents au développement des nouvelles technologies de communications sans-fil, comme la 5G, est la transition des fréquences radios classiques, inférieures à 6 GHz, vers le domaine des ondes millimétriques, au-delà de 30 GHz. En effet, les sources électroniques permettant de générer de telles ondes ne sont pas compatibles avec les applications visées, notamment le déploiement au sein d’unités déportées, car trop volumineuses, coûteuses et gourmandes en énergie. Pour les remplacer, les technologies optiques cohérentes font office de favorites car elles permettent de bénéficier des infrastructures déjà déployées en fibre optique tout en minimisant les éléments nécessaires au niveau des antennes. Par ailleurs, la maturité des circuits photoniques intégrés arrive à un point décisif aujourd’hui ce qui permet d’envisager leur usage massif dans les futurs dispositifs de transmissions cohérentes. L’association de ces technologies avec la réduction de la taille des antennes dans le domaine millimétrique débloque également l’accès à des solutions comme la formation de faisceaux et le multiplexage spatial, dont les utilisations dans ce contexte étaient jusqu’ici limitées. Parmi les techniques de génération d’ondes millimétriques par voie optique nous avons décidé d’étudier dans ces travaux la boucle à verrouillage de phase optique, ainsi que sa compatibilité avec les technologies de fonderies commerciales pour la réalisation de circuits intégrés. Le principe repose sur l’asservissement, à l’aide de correcteurs électroniques, des variations de phase de deux lasers dans le but de les rendre artificiellement cohérents. Le battement de ces deux lasers peut alors être facilement utilisé pour effectuer une montée en fréquence de la bande de base vers le domaine millimétrique. Les avantages de cette technique reposent sur une forte puissance optique disponible alliée à une grande flexibilité d’architecture, ce qui convient particulièrement bien à une utilisation au sein de circuits photoniques de traitement de plus en plus complexes. Dans ces travaux nous avons d’abord développé une boucle à base de composants télécoms fibrés commerciaux afin de montrer la viabilité de l’utilisation des lasers à semi-conducteurs au sein de ce genre de dispositif. Cette boucle a été ensuite implémentée dans diverses expériences de transmissions en bande K (20-30 GHz) au sein du démonstrateur du projet européen blueSPACE sur la 5G, ce qui nous a permis d’étudier la robustesse de la boucle en termes de bruit de phase relativement aux formats de modulations QAM et à la méthode OFDM, standards pour la future 5G. En parallèle nous avons conçu un circuit photonique de boucle à verrouillage de phase dont nous avons ensuite sous-traité la fabrication à une fonderie commerciale afin d’évaluer la maturité du procédé de fabrication pour la réalisation de ce genre de composant.
- 6 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Boucles à verrouillage de phase optique pour la génération de signaux hyperfréquences en bande 5G
L’un des principaux verrous technologiques inhérents au développement des nouvelles technologies de communications sans-fil, comme la 5G, est la transition des fréquences radios classiques, inférieures à 6 GHz, vers le domaine des ondes millimétriques, au-delà de 30 GHz. En effet, les sources électroniques permettant de générer de telles ondes ne sont pas compatibles avec les applications visées, notamment le déploiement au sein d’unités déportées, car trop volumineuses, coûteuses et gourmandes en énergie. Pour les remplacer, les technologies optiques cohérentes font office de favorites car elles permettent de bénéficier des infrastructures déjà déployées en fibre optique tout en minimisant les éléments nécessaires au niveau des antennes. Par ailleurs, la maturité des circuits photoniques intégrés arrive à un point décisif aujourd’hui ce qui permet d’envisager leur usage massif dans les futurs dispositifs de transmissions cohérentes. L’association de ces technologies avec la réduction de la taille des antennes dans le domaine millimétrique débloque également l’accès à des solutions comme la formation de faisceaux et le multiplexage spatial, dont les utilisations dans ce contexte étaient jusqu’ici limitées. Parmi les techniques de génération d’ondes millimétriques par voie optique nous avons décidé d’étudier dans ces travaux la boucle à verrouillage de phase optique, ainsi que sa compatibilité avec les technologies de fonderies commerciales pour la réalisation de circuits intégrés. Le principe repose sur l’asservissement, à l’aide de correcteurs électroniques, des variations de phase de deux lasers dans le but de les rendre artificiellement cohérents. Le battement de ces deux lasers peut alors être facilement utilisé pour effectuer une montée en fréquence de la bande de base vers le domaine millimétrique. Les avantages de cette technique reposent sur une forte puissance optique disponible alliée à une grande flexibilité d’architecture, ce qui convient particulièrement bien à une utilisation au sein de circuits photoniques de traitement de plus en plus complexes. Dans ces travaux nous avons d’abord développé une boucle à base de composants télécoms fibrés commerciaux afin de montrer la viabilité de l’utilisation des lasers à semi-conducteurs au sein de ce genre de dispositif. Cette boucle a été ensuite implémentée dans diverses expériences de transmissions en bande K (20-30 GHz) au sein du démonstrateur du projet européen blueSPACE sur la 5G, ce qui nous a permis d’étudier la robustesse de la boucle en termes de bruit de phase relativement aux formats de modulations QAM et à la méthode OFDM, standards pour la future 5G. En parallèle nous avons conçu un circuit photonique de boucle à verrouillage de phase dont nous avons ensuite sous-traité la fabrication à une fonderie commerciale afin d’évaluer la maturité du procédé de fabrication pour la réalisation de ce genre de composant.
- Open Access
- 13 August 2022
- Published by Elsevier in Optics Communications
- Vol. 526
Optical phase-locked loop phase noise in 5G mm-wave OFDM ARoF systems
- 13 August 2022
- Published by Elsevier in Optics Communications
- Vol. 526
Open AccessOptical phase-locked loop phase noise in 5G mm-wave OFDM ARoF systems
- Open Access
- 26 February 2021
- Published by Springer Nature in EURASIP Journal on Wireless Communications and Networking
- Vol. 2021 (1) , 1-20
Real-time high-bandwidth mm-wave 5G NR signal transmission with analog radio-over-fiber fronthaul over multi-core fiber
This article presents an experimental demonstration of a high-capacity millimeter-wave 5G NR signal transmission with analog radio-over-fiber (ARoF) fronthaul over multi-core fiber and full real-time processing. The demonstration validates the core of the blueSPACE fronthaul architecture which combines ARoF fronthaul with space division multiplexing in the optical distribution network to alleviate the fronthaul capacity bottleneck and maintain a centralized radio access network with fully centralized signal processing. The introduction of optical beamforming in the blueSPACE architecture brings true multi-beam transmission and enables full spatial control over the RF signal. The proposed ARoF architecture features a transmitter that generates the ARoF signal and an optical signal carrying a reference local oscillator employed for downconversion at the remote unit from a single RF reference at the central office. A space division multiplexing based radio access network with multi-core fibre allows parallel transport of the uplink ARoF signal and reference local oscillator at the same wavelength over separate cores. A complete description of the real-time signal processing and experimental setup is provided and system performance is evaluated. Transmission of an 800 MHz wide extended 5G NR fronthaul signal over a 7-core fibre is shown with full real-time signal processing, achieving 1.4 Gbit/s with a bit error rate $$<3.8\times 10^{-3}$$ and thus below the limit for hard-decision forward error correction with 7% overhead.- 26 February 2021
- Published by Springer Nature in EURASIP Journal on Wireless Communications and Networking
- Vol. 2021 (1) , 1-20
Open AccessReal-time high-bandwidth mm-wave 5G NR signal transmission with analog radio-over-fiber fronthaul over multi-core fiber
This article presents an experimental demonstration of a high-capacity millimeter-wave 5G NR signal transmission with analog radio-over-fiber (ARoF) fronthaul over multi-core fiber and full real-time processing. The demonstration validates the core of the blueSPACE fronthaul architecture which combines ARoF fronthaul with space division multiplexing in the optical distribution network to alleviate the fronthaul capacity bottleneck and maintain a centralized radio access network with fully centralized signal processing. The introduction of optical beamforming in the blueSPACE architecture brings true multi-beam transmission and enables full spatial control over the RF signal. The proposed ARoF architecture features a transmitter that generates the ARoF signal and an optical signal carrying a reference local oscillator employed for downconversion at the remote unit from a single RF reference at the central office. A space division multiplexing based radio access network with multi-core fibre allows parallel transport of the uplink ARoF signal and reference local oscillator at the same wavelength over separate cores. A complete description of the real-time signal processing and experimental setup is provided and system performance is evaluated. Transmission of an 800 MHz wide extended 5G NR fronthaul signal over a 7-core fibre is shown with full real-time signal processing, achieving 1.4 Gbit/s with a bit error rate $$<3.8\times 10^{-3}$$ and thus below the limit for hard-decision forward error correction with 7% overhead. - Open Access
- 1 January 2021
- Published by Optica Publishing Group
- p. W2B.2
Experimental ARoF System Based on OPLL Mm-Wave Generation for Beyond 5G
We experimentally analyze the ARoF based on OPLL mm-Wave generation performance for 5G fronthaul. Remarkable performance improvements are achieved for all 5G NR numerologies and different OPLL configurations despite their inherently high phase noise level.
- 1 January 2021
- Published by Optica Publishing Group
- p. W2B.2
Open AccessExperimental ARoF System Based on OPLL Mm-Wave Generation for Beyond 5G
We experimentally analyze the ARoF based on OPLL mm-Wave generation performance for 5G fronthaul. Remarkable performance improvements are achieved for all 5G NR numerologies and different OPLL configurations despite their inherently high phase noise level.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (19) , 5412-5422
Towards a Scaleable 5G Fronthaul: Analog Radio-over-Fiber and Space Division Multiplexing
The introduction of millimeter wave (mm-wave) frequency bands for cellular communications with significantly larger bandwidths compared to their sub-6GHz counterparts, the resulting densification of network deployments and the introduction of antenna arrays with beamforming result in major increases in fronthaul capacity required for 5G networks. As a result, a radical re-design of the radio access network is required since traditional fronthaul technologies are not scaleable. In this article the use of analog radio over fiber (ARoF) is proposed and demonstrated as a viable alternative which, combined with space division multiplexing in the optical distribution network as well as photonic integration of the required transceivers, shows a path to a scaleable fronthaul solution for 5G. The trade-off between digitized and analog fronthaul is discussed and the ARoF architecture proposed by blueSPACE is introduced. Two options for the generation of ARoF two-tone signals for mm-wave generation via optical heterodyning are discussed in detail, including designs for the implementation in photonic integrated circuits as well as measurements of their phase noise performance. The proposed photonic integrated circuit designs include the use of both InP and SiN platforms for ARoF signal generation and optical beamforming respectively, proposing a joint design that allows for true multi-beam transmission from a single antenna array. Phase noise measurements based on laboratory implementations of ARoF generation based on a Mach-Zehnder modulator with suppressed carrier and with an optical phase-locked loop are presented and the suitability of these transmitters is evaluated though phase noise simulations. Finally, the viability of the proposed ARoF fronthaul architecture for the transport of high-bandwidth mm-wave 5G signals is proven with the successful implementation of a real-time transmission link based on an ARoF baseband unit with full real-time processing of extended 5G new radio signals with 800MHz bandwidth, achieving transmission over 10km of 7-core single-mode multi-core fiber and 9m mm-wave wireless at 25.5GHz with bit error rates below the limit for a 7% overhead hard decision forward error correction.
- 23 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (19) , 5412-5422
Towards a Scaleable 5G Fronthaul: Analog Radio-over-Fiber and Space Division Multiplexing
The introduction of millimeter wave (mm-wave) frequency bands for cellular communications with significantly larger bandwidths compared to their sub-6GHz counterparts, the resulting densification of network deployments and the introduction of antenna arrays with beamforming result in major increases in fronthaul capacity required for 5G networks. As a result, a radical re-design of the radio access network is required since traditional fronthaul technologies are not scaleable. In this article the use of analog radio over fiber (ARoF) is proposed and demonstrated as a viable alternative which, combined with space division multiplexing in the optical distribution network as well as photonic integration of the required transceivers, shows a path to a scaleable fronthaul solution for 5G. The trade-off between digitized and analog fronthaul is discussed and the ARoF architecture proposed by blueSPACE is introduced. Two options for the generation of ARoF two-tone signals for mm-wave generation via optical heterodyning are discussed in detail, including designs for the implementation in photonic integrated circuits as well as measurements of their phase noise performance. The proposed photonic integrated circuit designs include the use of both InP and SiN platforms for ARoF signal generation and optical beamforming respectively, proposing a joint design that allows for true multi-beam transmission from a single antenna array. Phase noise measurements based on laboratory implementations of ARoF generation based on a Mach-Zehnder modulator with suppressed carrier and with an optical phase-locked loop are presented and the suitability of these transmitters is evaluated though phase noise simulations. Finally, the viability of the proposed ARoF fronthaul architecture for the transport of high-bandwidth mm-wave 5G signals is proven with the successful implementation of a real-time transmission link based on an ARoF baseband unit with full real-time processing of extended 5G new radio signals with 800MHz bandwidth, achieving transmission over 10km of 7-core single-mode multi-core fiber and 9m mm-wave wireless at 25.5GHz with bit error rates below the limit for a 7% overhead hard decision forward error correction.
- Open Access
- 31 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (16) , 20868-20877
Fully embedded photonic crystal cavity with Q=06 million fabricated within a full-process CMOS multiproject wafer
A two dimensional photonic crystal (PhC) resonator, based on a recent design concept, entirely embedded in Silica, is fabricated in a CMOS full-process multiproject wafer, including additional steps such as implantation, metalization, Germanium deposition and planarization. A large loaded Q-factor (5.9 × 105) is achieved without removal of the silica cladding. A statistical analysis over 56 devices leads to an average value for the loaded Q of 4 × 105, in close agreement with calculations. An upper boundary for the fabrication disorder is estimated to 1.2 nm.
- 31 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (16) , 20868-20877
Open AccessFully embedded photonic crystal cavity with Q=06 million fabricated within a full-process CMOS multiproject wafer
A two dimensional photonic crystal (PhC) resonator, based on a recent design concept, entirely embedded in Silica, is fabricated in a CMOS full-process multiproject wafer, including additional steps such as implantation, metalization, Germanium deposition and planarization. A large loaded Q-factor (5.9 × 105) is achieved without removal of the silica cladding. A statistical analysis over 56 devices leads to an average value for the loaded Q of 4 × 105, in close agreement with calculations. An upper boundary for the fabrication disorder is estimated to 1.2 nm.
- Top Cited PapersOpen Access
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (19) , 4640-4645
Photonic Integrated Circuit-Based FMCW Coherent LiDAR
We present the demonstration of an integrated Frequency Modulated Continuous Wave LiDAR on a silicon platform. The waveform calibration, the scanning system and the balanced detectors are implemented on chip. Detection and ranging of a moving hard target at up to 60 m with less than 5 mW of output power is demonstrated here.
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (19) , 4640-4645
Top Cited PapersOpen AccessPhotonic Integrated Circuit-Based FMCW Coherent LiDAR
We present the demonstration of an integrated Frequency Modulated Continuous Wave LiDAR on a silicon platform. The waveform calibration, the scanning system and the balanced detectors are implemented on chip. Detection and ranging of a moving hard target at up to 60 m with less than 5 mW of output power is demonstrated here.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh3A.1
CMOS-Compatible High-Q Photonic Crystal Cavities
All-Solid Cladding Photonic Crystal Cavities have been fabricated in CMOS foundry. A recent design concept resulted into a measured Q-factor of 0.6 million (4.1 × 105 in average). Statistical analysis leads to an estimate of the fabrication disorder of 1.2 nm.
- 1 January 2018
- Published by Optica Publishing Group
- p. STh3A.1
CMOS-Compatible High-Q Photonic Crystal Cavities
All-Solid Cladding Photonic Crystal Cavities have been fabricated in CMOS foundry. A recent design concept resulted into a measured Q-factor of 0.6 million (4.1 × 105 in average). Statistical analysis leads to an estimate of the fabrication disorder of 1.2 nm.