DJDongxiang Jiang

Dongxiang Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dongxiang Jiang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fault identification of aero-engine central rod-fastened rotor system based on multi-source information fusion and graph convolutional network

    by Tong Liu, Yufan Zhang, Gancai Huang, Chao Liu, Dongxiang Jiang

    Accurate fault identification is the key to realizing the fault diagnosis and condition monitoring of aero-engines. Aero-engine rotor systems work in high-temperature, high-speed and high-pressure environments. It is extremely prone to failure. In this article, a rotor system fault identification method based on multi-source information fusion and graph convolutional network (MSIF-GCN) is proposed. Firstly, a simulation test bed for the center rod-fastened rotor system of aero-engines was built. Experiments with different fault states were carried out on the test bed. The corresponding acoustic emission, sound and vibration signals were collected. Secondly, the acquired signals were converted into two-dimensional time-frequency maps using continuous wavelet transform. The spatial structure between the time-frequency maps was encoded through the adjacent matrix. The waveform reverberation, dispersion characteristics and multimodal characteristics of various signals were deeply explored. The MSIF-GCN model was established to realize fault identification. The accuracy of fault identification reached 99.77%. Thirdly, the fault identification situation when using a certain type of sensor data alone was studied. The positive effect of multi-source information fusion methods on model accuracy was demonstrated. Finally, the superiority of the MSIF-GCN model was further verified by comparing it with other well-established fault identification methods. These results show that the method proposed in this article can be used as an effective means of fault identification and diagnosis for aero-engine center rod-fastened rotor systems.


  • Open Access

    Screw Remaining Life Prediction Based on Quantum Genetic Algorithm and Support Vector Machine

    by Xiaochen Zhang, Dongxiang Jiang

    To predict the remaining life of ball screw, a screw remaining life prediction method based on quantum genetic algorithm (QGA) and support vector machine (SVM) is proposed. A screw accelerated test bench is introduced. Accelerometers are installed to monitor the performance degradation of ball screw. Combined with wavelet packet decomposition and isometric mapping (Isomap), the sensitive feature vectors are obtained and stored in database. Meanwhile, the sensitive feature vectors are randomly chosen from the database and constitute training samples and testing samples. Then the optimal kernel function parameter and penalty factor of SVM are searched with the method of QGA. Finally, the training samples are used to train optimized SVM while testing samples are adopted to test the prediction accuracy of the trained SVM so the screw remaining life prediction model can be got. The experiment results show that the screw remaining life prediction model could effectively predict screw remaining life.


  • Open Access

    Casing Vibration Fault Diagnosis Based on Variational Mode Decomposition, Local Linear Embedding, and Support Vector Machine

    by Yizhou Yang, Dongxiang Jiang

    To diagnose mechanical faults of rotor-bearing-casing system by analyzing its casing vibration signal, this paper proposes a training procedure of a fault classifier based on variational mode decomposition (VMD), local linear embedding (LLE), and support vector machine (SVM). VMD is used first to decompose the casing signal into several modes, which are subsignals usually modulated by fault frequencies. Vibrational features are extracted from both VMD subsignals and the original one. LLE is employed here to reduce the dimensionality of these extracted features and make the samples more separable. Then low-dimensional data sets are used to train the multiclass SVM whose accuracy is tested by classifying the test samples. When the parameters of LLE and SVM are well optimized, this proposed method performs well on experimental data, showing its capacity of diagnosing casing vibration faults.


  • Open Access

    Rotating Machinery Fault Diagnosis for Imbalanced Data Based on Fast Clustering Algorithm and Support Vector Machine

    by Xiaochen Zhang, Dongxiang Jiang, Te Han, Nanfei Wang, Wenguang Yang, Yizhou Yang

    To diagnose rotating machinery fault for imbalanced data, a method based on fast clustering algorithm (FCA) and support vector machine (SVM) was proposed. Combined with variational mode decomposition (VMD) and principal component analysis (PCA), sensitive features of the rotating machinery fault were obtained and constituted the imbalanced fault sample set. Next, a fast clustering algorithm was adopted to reduce the number of the majority data from the imbalanced fault sample set. Consequently, the balanced fault sample set consisted of the clustered data and the minority data from the imbalanced fault sample set. After that, SVM was trained with the balanced fault sample set and tested with the imbalanced fault sample set so the fault diagnosis model of the rotating machinery could be obtained. Finally, the gearbox fault data set and the rolling bearing fault data set were adopted to test the fault diagnosis model. The experimental results showed that the fault diagnosis model could effectively diagnose the rotating machinery fault for imbalanced data.


  • Open Access

    Dynamic Characteristics and Experimental Research of Dual-Rotor System with Rub-Impact Fault

    by Hongzhi Xu, Nanfei Wang, Dongxiang Jiang, Te Han, Dewang Li

    Rub-impact fault model for dual-rotor system was further developed, in which rubbing board is regarded as elastic sheet. Sheet elastic deformation, contact penetration, and elastic damping support during rubbing of sheet and wheel disk were considered. Collision force and friction were calculated by utilizing Hertz contact theory and Coulomb model and introducing nonlinear spring damping model and friction coefficient. Then kinetic differential equations of rub-impact under dry rubbing condition were established. Based on one-dimensional finite element model of dual-rotor system, dynamic transient response of overall structure under rub-impact existing between rotor wheel and sheet was obtained. Meanwhile, fault dynamic characteristics and impact of rubbing clearance on rotor vibration were analyzed. The results show that, during the process of rub-impact, the spectrums of rotor vibration are complicated and multiple combined frequency components of inner and outer rotor fundamental frequencies are typical characteristic of rub-impact fault for dual-rotor system. It also can be seen from rotor vibration response that the rubbing rotor’s fundamental frequency is modulated by normal rotor double frequency.


  • Open Access

    Rolling Bearing Fault Diagnostic Method Based on VMD-AR Model and Random Forest Classifier

    by Te Han, Dongxiang Jiang

    Targeting the nonstationary and non-Gaussian characteristics of vibration signal from fault rolling bearing, this paper proposes a fault feature extraction method based on variational mode decomposition (VMD) and autoregressive (AR) model parameters. Firstly, VMD is applied to decompose vibration signals and a series of stationary component signals can be obtained. Secondly, AR model is established for each component mode. Thirdly, the parameters and remnant of AR model served as fault characteristic vectors. Finally, a novel random forest (RF) classifier is put forward for pattern recognition in the field of rolling bearing fault diagnosis. The validity and superiority of proposed method are verified by an experimental dataset. Analysis results show that this method based on VMD-AR model can extract fault features accurately and RF classifier has been proved to outperform comparative classifiers.


  • Application of Fuzzy-Rough Set theory and improved SMO algorithm in aircraft engine vibration fault diagnosis

    by Hongzhi Xu, Dongxiang Jiang, Lei Liang

    Aircraft engine is an important component of the airplane, which lifespan and reliability have directly influence to flight safety. Vibration analysis is an effective fault diagnosis method for airplane's mechanical construction fault. Several typical vibration faults have drawn from the vibration analysis on the basis of fault mechanism in aircraft engine, and the standard vibration fault-symptom (Fuzzy Membership) relationship table have constructed based on Fuzzy Mathematic theory in this paper. Sample data are simulated on the basis of this table. Sequential Minimal Optimization (SMO) is a fast algorithm for training Support Vector Machines (SVM). The simulated result showed a great improvement on computation efficiency by selecting double threshold parameter for SMO algorithm than single threshold. In order to examine the algorithm's effect applying in the aircraft engine fault diagnosis, Radial Basis Function (RBF) Neural Network, C4.5 Decision Tree, SVM (chunking), Platt's SMO and Improved SMO algorithm are applied to the training data and test data. It is shown that the Improved SMO algorithm displayed superior comprehensive performance. Finally, the vibration fault feature is reduced based on Fuzzy-Rough Sets theory. The research shows that the Improved SMO algorithm is quicker than other algorithm in aircraft engine fault diagnosis with the reduced feature attributes, and its accuracy is high.