Jinsong Qian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jinsong Qian has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Jianming Ling
Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University, Shanghai, People’s Republic of China
4 shared publications- Jianming Ling
Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University, Shanghai 201804, China
3 shared publications - Guoxi Liang
Poly Changda Engineering Co.Ltd., Guangzhou, Guangdong 510620, China
2 shared publications Jiake Zhang
2 shared publicationsWei Fu
Researcher, CCCC Second Highway Consultant Co. Ltd., 18 Chuangye Rd., Wuhan, Hubei 430056, China
2 shared publicationsYu Zhang
2 shared publications
Latest Publications
- 20 July 2026
- Published by Taylor & Francis in Road Materials and Pavement Design
- p. 1-17
Calcium addition synergistic ball milling of municipal solid waste incineration bottom ash improves performance of controlled low-strength material
1. With the continuous growth in waste incineration, the output of municipal solid waste incineration bottom ash (MSWI-BA) will inevitably keep increasing. To alleviate the disposal pressure on MSW...
- 20 July 2026
- Published by Taylor & Francis in Road Materials and Pavement Design
- p. 1-17
Calcium addition synergistic ball milling of municipal solid waste incineration bottom ash improves performance of controlled low-strength material
1. With the continuous growth in waste incineration, the output of municipal solid waste incineration bottom ash (MSWI-BA) will inevitably keep increasing. To alleviate the disposal pressure on MSW...
- Open Access
- 13 February 2026
- Published by Elsevier in SSRN Electronic Journal
Skid Resistance Deterioration of Steel Slag Asphalt Mixtures Based on Laboratory Rolling Abrasion Tests
This study investigates steel slag asphalt mixtures using an enhanced multi-parameter controllable asphalt pavement accelerated abrasion tester and a laser profile acquisition instrument. Over 20 million loading-abrasion revolutions were conducted, during which skid resistance data at various stages were collected. A comparative analysis was performed to examine the long-term skid resistance deterioration patterns of steel slag mixtures versus traditional asphalt mixtures. The results show that steel slag aggregates outperform conventional aggregates in key indices. The presence of compounds in steel slag enhances the bonding force between materials, which underpins the abrasion resistance of steel slag asphalt mixtures and contributes to their skid resistance. The British Pendulum Number (BPN) measurements revealed a distinct three-stage decay pattern in steel slag mixtures compared to conventional aggregates, underscoring their superior and more stable skid resistance. Both the exponential and logarithmic models effectively characterize the deterioration. The Exponential model I exhibited the highest predictive accuracy, and field validation confirmed its reliability. These findings deepen the theoretical understanding of skid resistance decay mechanisms, promote the resource-efficient use of steel slag in pavement engineering, and provide a robust foundation for future research on the sustainable application of steel slag asphalt mixtures.
- 13 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSkid Resistance Deterioration of Steel Slag Asphalt Mixtures Based on Laboratory Rolling Abrasion Tests
This study investigates steel slag asphalt mixtures using an enhanced multi-parameter controllable asphalt pavement accelerated abrasion tester and a laser profile acquisition instrument. Over 20 million loading-abrasion revolutions were conducted, during which skid resistance data at various stages were collected. A comparative analysis was performed to examine the long-term skid resistance deterioration patterns of steel slag mixtures versus traditional asphalt mixtures. The results show that steel slag aggregates outperform conventional aggregates in key indices. The presence of compounds in steel slag enhances the bonding force between materials, which underpins the abrasion resistance of steel slag asphalt mixtures and contributes to their skid resistance. The British Pendulum Number (BPN) measurements revealed a distinct three-stage decay pattern in steel slag mixtures compared to conventional aggregates, underscoring their superior and more stable skid resistance. Both the exponential and logarithmic models effectively characterize the deterioration. The Exponential model I exhibited the highest predictive accuracy, and field validation confirmed its reliability. These findings deepen the theoretical understanding of skid resistance decay mechanisms, promote the resource-efficient use of steel slag in pavement engineering, and provide a robust foundation for future research on the sustainable application of steel slag asphalt mixtures.
- Open Access
- 1 June 2025
- Published by KEAI Publishing in International Journal of Transportation Science and Technology
- Vol. 23, 191-206
Smartphone-based image analysis method for estimating moisture content in subgrade filling
- 1 June 2025
- Published by KEAI Publishing in International Journal of Transportation Science and Technology
- Vol. 23, 191-206
Open AccessSmartphone-based image analysis method for estimating moisture content in subgrade filling
- Open Access
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 19478-19486
Precise Retrieval of Sentinel-1 Data by Minimizing the Redundancy With Greedy Algorithm
With a widespread adoption of Synthetic Aperture Radar (SAR) observations in Earth sciences, the volume of annual data updates has soared to petabyte scales. Consequently, the accurate retrieval and efficient storage of SAR data have become pressing concerns. The existing data searching method exhibits significant redundancy, leading to wasteful consumption of bandwidth and storage resources. Aiming to address this issue, we present here an optimized retrieval method grounded in a greedy algorithm, which can substantially reduce redundant data by approximately 20% to 65% while ensuring comprehensive data coverage over the Areas of Interest (AOI). By significantly minimizing redundant data, the proposed method markedly enhances data acquisition efficiency and conserves storage space. Validation experiments with Sentinel-1 data, employing various KML scope files as inputs, affirm the effectiveness and reliability of the method. The application of the proposed method is expected to pave the way for efficient data management and fully automatic InSAR processing.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 19478-19486
Open AccessPrecise Retrieval of Sentinel-1 Data by Minimizing the Redundancy With Greedy Algorithm
With a widespread adoption of Synthetic Aperture Radar (SAR) observations in Earth sciences, the volume of annual data updates has soared to petabyte scales. Consequently, the accurate retrieval and efficient storage of SAR data have become pressing concerns. The existing data searching method exhibits significant redundancy, leading to wasteful consumption of bandwidth and storage resources. Aiming to address this issue, we present here an optimized retrieval method grounded in a greedy algorithm, which can substantially reduce redundant data by approximately 20% to 65% while ensuring comprehensive data coverage over the Areas of Interest (AOI). By significantly minimizing redundant data, the proposed method markedly enhances data acquisition efficiency and conserves storage space. Validation experiments with Sentinel-1 data, employing various KML scope files as inputs, affirm the effectiveness and reliability of the method. The application of the proposed method is expected to pave the way for efficient data management and fully automatic InSAR processing.
- Open Access
- 20 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 68
Intelligent Compaction Measurement Value in Variability Control of Subgrade Compaction Quality
Intelligent compaction (IC) is an innovative and modified technology used for quality control in subgrade digital construction. However, current intelligent compaction measurement values (ICMVs) cannot provide accurate measurement of the filling layer when the strength of the underlying layer is relatively high. Experimental field tests conducted in the cut to fill subgrade were performed to collect and analyze the variability of ICMV called the vibration modulus (Evib). Furthermore, a new ICMV called the modulus of vibration compaction (Evc) that could remove the interference of the underlying layer and reveal the actual compaction state of filling layer is presented based on the theoretical analysis and numerical simulation method. It was also extracted to study the variability of the filling layer’s compaction state. The results of the above research indicate the influence of the underlying layer’s stiffness on overall compaction quality is remarkable. It was found that it is more likely to achieve the variability control of the compaction state of the filling layer by a new ICMV called Evc. The measured data, improved approaches, and associated conclusions that are presented provide valuable information for researchers and employees considering the use of IC technology.
- 20 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 14 (1) , 68
Open AccessIntelligent Compaction Measurement Value in Variability Control of Subgrade Compaction Quality
Intelligent compaction (IC) is an innovative and modified technology used for quality control in subgrade digital construction. However, current intelligent compaction measurement values (ICMVs) cannot provide accurate measurement of the filling layer when the strength of the underlying layer is relatively high. Experimental field tests conducted in the cut to fill subgrade were performed to collect and analyze the variability of ICMV called the vibration modulus (Evib). Furthermore, a new ICMV called the modulus of vibration compaction (Evc) that could remove the interference of the underlying layer and reveal the actual compaction state of filling layer is presented based on the theoretical analysis and numerical simulation method. It was also extracted to study the variability of the filling layer’s compaction state. The results of the above research indicate the influence of the underlying layer’s stiffness on overall compaction quality is remarkable. It was found that it is more likely to achieve the variability control of the compaction state of the filling layer by a new ICMV called Evc. The measured data, improved approaches, and associated conclusions that are presented provide valuable information for researchers and employees considering the use of IC technology.
- Open Access
- 12 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 5953
Study of Regression Algorithms and Influent Factors between Intelligent Compaction Measurement Values and In-Situ Measurement Values
Intelligent compaction (IC) technology have been used for quality control and quality assurance (QC/QA) in subgrade construction. The effective regression correlations between Intelligent Compaction Measurement Values (ICMV) and In-situ Measurement Values (ISMV, including compaction degree and subgrade modulus ELWD) are the essential prerequisite of using IC technology for QC/QA. This paper presents the results from an experimental research study that was conducted from a practical subgrade project of China to explore the regression relationships between ICMV and ISMV. Three types of ICMV, including CMV, CCV and Evib, were collected along with the corresponding positions of the rollers. Two types of ISMV, containing compaction degree and ELWD, were measured by ring sampler method and light weight deflectometer (LWD) at specified test points, respectively. Based on these data, the influences of roller parameters and subgrade properties on the regression relationships of ICMV and ISMV were investigated. In addition, linear regression and 5 nonlinear regression algorithms were compared. The results suggest that ICMV reflect the stiffness of subgrade more than reflecting the density. In the regression of ICMV and ISMV, subgrade properties are more important than roller parameters while both of them should not be neglected. The influences of underlying stiffness and roller amplitude are linear while that of roller speed and moisture content are nonlinear. Nonlinear algorithms, especially the random forest, have the better performance compared to linear algorithm. Moreover, the combination of random forest and linear algorithm can further improve the accuracy of ISMV prediction.
- 12 May 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (10) , 5953
Open AccessStudy of Regression Algorithms and Influent Factors between Intelligent Compaction Measurement Values and In-Situ Measurement Values
Intelligent compaction (IC) technology have been used for quality control and quality assurance (QC/QA) in subgrade construction. The effective regression correlations between Intelligent Compaction Measurement Values (ICMV) and In-situ Measurement Values (ISMV, including compaction degree and subgrade modulus ELWD) are the essential prerequisite of using IC technology for QC/QA. This paper presents the results from an experimental research study that was conducted from a practical subgrade project of China to explore the regression relationships between ICMV and ISMV. Three types of ICMV, including CMV, CCV and Evib, were collected along with the corresponding positions of the rollers. Two types of ISMV, containing compaction degree and ELWD, were measured by ring sampler method and light weight deflectometer (LWD) at specified test points, respectively. Based on these data, the influences of roller parameters and subgrade properties on the regression relationships of ICMV and ISMV were investigated. In addition, linear regression and 5 nonlinear regression algorithms were compared. The results suggest that ICMV reflect the stiffness of subgrade more than reflecting the density. In the regression of ICMV and ISMV, subgrade properties are more important than roller parameters while both of them should not be neglected. The influences of underlying stiffness and roller amplitude are linear while that of roller speed and moisture content are nonlinear. Nonlinear algorithms, especially the random forest, have the better performance compared to linear algorithm. Moreover, the combination of random forest and linear algorithm can further improve the accuracy of ISMV prediction.
- 28 January 2023
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (2)
Dynamic stress in the ground of rigid pavement subjected to moving aircraft loads at various speeds
- 28 January 2023
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 24 (2)
Dynamic stress in the ground of rigid pavement subjected to moving aircraft loads at various speeds
- 20 January 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (5) , 2801-2816
Applicability of Optical Fibers for Monitoring the Temperature and Moisture of Freeze-Thaw Soil
Real-time measurements of soil temperature and moisture fields in freeze-thaw areas provide data support for improving the durability of infrastructure. Compared to traditional sensors, optical fibers can determine soil temperature and moisture fields accurately, efficiently, and reliably, but their monitoring characteristics in freeze-thaw areas must be further investigated. In this study, optical fibers are applied for monitoring soil temperature and moisture in freeze-thaw soil based on distributed temperature sensing and an actively heated fiber optic method. The test results indicate that the spatial resolution of a fiber measuring tube constructed by winding optical fibers is 34 times higher than single fibers. A high correlation is confirmed between data measured by optical fibers and traditional sensors. For the soil temperature, the coefficient of determination is 0.98 and the root mean square error is 0.90°C. For the soil volumetric water content, the coefficient of determination is 0.94 and the root mean square error is 2.17 %. Furthermore, the optical fibers can identify the boundary between frozen and unfrozen soil through the value measured in the freeze-thaw process. The results reveal that the optical fibers are efficient in monitoring soil temperature and moisture fields in the freeze-thaw process and carry the advantages of in situ and distributed measurements, high measuring precision, and wide adaptability in working conditions.
- 20 January 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (5) , 2801-2816
Applicability of Optical Fibers for Monitoring the Temperature and Moisture of Freeze-Thaw Soil
Real-time measurements of soil temperature and moisture fields in freeze-thaw areas provide data support for improving the durability of infrastructure. Compared to traditional sensors, optical fibers can determine soil temperature and moisture fields accurately, efficiently, and reliably, but their monitoring characteristics in freeze-thaw areas must be further investigated. In this study, optical fibers are applied for monitoring soil temperature and moisture in freeze-thaw soil based on distributed temperature sensing and an actively heated fiber optic method. The test results indicate that the spatial resolution of a fiber measuring tube constructed by winding optical fibers is 34 times higher than single fibers. A high correlation is confirmed between data measured by optical fibers and traditional sensors. For the soil temperature, the coefficient of determination is 0.98 and the root mean square error is 0.90°C. For the soil volumetric water content, the coefficient of determination is 0.94 and the root mean square error is 2.17 %. Furthermore, the optical fibers can identify the boundary between frozen and unfrozen soil through the value measured in the freeze-thaw process. The results reveal that the optical fibers are efficient in monitoring soil temperature and moisture fields in the freeze-thaw process and carry the advantages of in situ and distributed measurements, high measuring precision, and wide adaptability in working conditions.
- Open Access
Effects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture
Soil-rock mixture is a commonly used geotechnical material used in many construction projects, such as slopes, tunnels, and dams. The shear strength of soil-rock mixture is its key property and is affected by many factors. This study aimed to investigate the shear strength characteristics of soil-rock mixture and the influences of moisture and stone content on shear strength parameters. Soil-rock mixture samples with four different stone and moisture contents were fabricated and tested using a large-scale direct shear test apparatus under four vertical pressures. The results demonstrated that the shear properties of the soil-rock mixture showed significant Mohr Coulomb failure criteria for all stone contents. As the moisture content increased, the shear strength of the soil-rock mixture first increased by 10~18% and then decreased after w = 12% to the residue value. The change in cohesion and internal friction angle of soil-rock mixture with different moisture contents shared a similar trend. For w < 12%, the cohesion and internal friction angle increased with moisture content, and for w > 12%, the two indexes obviously decreased. As the stone content increased from 30% to 60%, the shear strength of the soil-rock mixture increased by 82~174%. The internal friction angle increased linearly with stone content, while the cohesion of the mixture first increased and then decreased after the stone content reached 50%. The results can help in the designation and application of soil-rock mixture.
Open AccessEffects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture
Soil-rock mixture is a commonly used geotechnical material used in many construction projects, such as slopes, tunnels, and dams. The shear strength of soil-rock mixture is its key property and is affected by many factors. This study aimed to investigate the shear strength characteristics of soil-rock mixture and the influences of moisture and stone content on shear strength parameters. Soil-rock mixture samples with four different stone and moisture contents were fabricated and tested using a large-scale direct shear test apparatus under four vertical pressures. The results demonstrated that the shear properties of the soil-rock mixture showed significant Mohr Coulomb failure criteria for all stone contents. As the moisture content increased, the shear strength of the soil-rock mixture first increased by 10~18% and then decreased after w = 12% to the residue value. The change in cohesion and internal friction angle of soil-rock mixture with different moisture contents shared a similar trend. For w < 12%, the cohesion and internal friction angle increased with moisture content, and for w > 12%, the two indexes obviously decreased. As the stone content increased from 30% to 60%, the shear strength of the soil-rock mixture increased by 82~174%. The internal friction angle increased linearly with stone content, while the cohesion of the mixture first increased and then decreased after the stone content reached 50%. The results can help in the designation and application of soil-rock mixture.
- Open Access
- 17 September 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-16
Investigating the Combined Effects of Inherent and Stress-Induced Anisotropy on the Mechanical Behavior of Granular Materials Using Three-Dimensional Discrete Element Method
The three-dimensional discrete element method (DEM) was employed to investigate the combined effects of inherent and stress-induced anisotropy of granular materials. The particles were modeled following real particle shapes. Both isotropic and inherently anisotropic specimens were prepared, and then true triaxial numerical tests were conducted using different intermediate principle stress ratios (b). The results indicate that the oriented particles in the anisotropic specimens form strong contacts in their long axis direction in the early stages of shearing, which restrains the contraction of the specimens. As the strain increases, the oriented particles start to rotate and slide, which results in shorter contraction stages and fewer number of interparticle contacts with peak values compared to the isotropic specimens. In addition, the increase inbvalues aggravates the rotating and sliding of particles in the inherently anisotropic specimens and restrains the contraction of the granular and the increase of contact forces. As a result, the inherent anisotropy reduces the effects of stress-induced anisotropy on the mechanical behavior of granular materials.
- 17 September 2020
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2020, 1-16
Open AccessInvestigating the Combined Effects of Inherent and Stress-Induced Anisotropy on the Mechanical Behavior of Granular Materials Using Three-Dimensional Discrete Element Method
The three-dimensional discrete element method (DEM) was employed to investigate the combined effects of inherent and stress-induced anisotropy of granular materials. The particles were modeled following real particle shapes. Both isotropic and inherently anisotropic specimens were prepared, and then true triaxial numerical tests were conducted using different intermediate principle stress ratios (b). The results indicate that the oriented particles in the anisotropic specimens form strong contacts in their long axis direction in the early stages of shearing, which restrains the contraction of the specimens. As the strain increases, the oriented particles start to rotate and slide, which results in shorter contraction stages and fewer number of interparticle contacts with peak values compared to the isotropic specimens. In addition, the increase inbvalues aggravates the rotating and sliding of particles in the inherently anisotropic specimens and restrains the contraction of the granular and the increase of contact forces. As a result, the inherent anisotropy reduces the effects of stress-induced anisotropy on the mechanical behavior of granular materials.