Levent Nuralın
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Levent Nuralın has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Cem Taşdemir
Soil, Fertilizer and Water Resources Central Research Institute, Yenimahalle, Ankara, Türkiye
2 shared publications Metin Gürü
2 shared publications- Metin Gürü
Faculty of Engineering Gazi University Ankara Türkiye
2 shared publications - Özlem Güngör
Department of Chemistry, Faculty of Science, Gazi University, Ankara, Turkey
2 shared publications - Ayşe Tosun
Faculty of Architecture and Engineering, Chemical Engineering Department, Gazi University, 06570 Maltepe, Ankara, Turkey
1 shared publication Fatma Betül Akgün
1 shared publication
Latest Publications
- 18 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (3) , 149
Controlled drug delivery using alginate hydrogels reinforced with nanocellulose from waste hazelnut husk
- 18 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (3) , 149
Controlled drug delivery using alginate hydrogels reinforced with nanocellulose from waste hazelnut husk
- 9 October 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 36 (1) , 381-399
A Novel o-vanillin-based Triimine-Schiff Base as an Effective Blue-green Emissive Fluorophore in Solution
Ortho-hydroxy symmetric diimine-Schiff base 6,6’-(((2-nitro-1,4-phenylene)bis(azanylylidene))bis(methanylylidene))bis(2-methoxyphenol) (D1) was prepared by using 2-nitro-para-phenylenediamine and ortho-vanillin. Nitro group of diimine has been completely reduced into aromatic amine, and then reacted with 4-chlorobenzaldehyde to obtain a new asymmetric triimine-Schiff base 6,6’-(((2-((4-chlorobenzylidene)amino)-1,4-phenylene)bis(azanylylidene)) bis(methanylylidene))bis(2-methoxyphenol) (T1). Spectral structure analyses reveal that this molecule exists in OH tautomeric form in the solid state and solution, attributed to a strong intramolecular hydrogen bond interaction between the phenolic protons and nitrogen atoms. The effects of solvent polarity and different excitation wavelengths (λexc = 365–640 nm) on the excited state intramolecular proton transfer (ESIPT) process have been examined by absorption and emission spectra. After excitation at 365 and 385 nm, T1 shows bright blue-green, bluish-green and greenish-blue light, and emission band is centered at λmax = 473–481 nm and 472–493 nm in these solutions, causing noticeable changes in the intensity. The fluorescence spectra display different λem at the excitation wavelengths of 470 and 530 nm, whereas T1 is non-emissive in all solutions. The optical properties of triimine have been investigated graphically by Tauc and Absorbance Spectrum Fitting (ASF) methods using UV–Vis absorbance spectroscopy. Some physicochemical and pharmacokinetic parameters have been determined through in silico SwissADME technique.
- 9 October 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 36 (1) , 381-399
A Novel o-vanillin-based Triimine-Schiff Base as an Effective Blue-green Emissive Fluorophore in Solution
Ortho-hydroxy symmetric diimine-Schiff base 6,6’-(((2-nitro-1,4-phenylene)bis(azanylylidene))bis(methanylylidene))bis(2-methoxyphenol) (D1) was prepared by using 2-nitro-para-phenylenediamine and ortho-vanillin. Nitro group of diimine has been completely reduced into aromatic amine, and then reacted with 4-chlorobenzaldehyde to obtain a new asymmetric triimine-Schiff base 6,6’-(((2-((4-chlorobenzylidene)amino)-1,4-phenylene)bis(azanylylidene)) bis(methanylylidene))bis(2-methoxyphenol) (T1). Spectral structure analyses reveal that this molecule exists in OH tautomeric form in the solid state and solution, attributed to a strong intramolecular hydrogen bond interaction between the phenolic protons and nitrogen atoms. The effects of solvent polarity and different excitation wavelengths (λexc = 365–640 nm) on the excited state intramolecular proton transfer (ESIPT) process have been examined by absorption and emission spectra. After excitation at 365 and 385 nm, T1 shows bright blue-green, bluish-green and greenish-blue light, and emission band is centered at λmax = 473–481 nm and 472–493 nm in these solutions, causing noticeable changes in the intensity. The fluorescence spectra display different λem at the excitation wavelengths of 470 and 530 nm, whereas T1 is non-emissive in all solutions. The optical properties of triimine have been investigated graphically by Tauc and Absorbance Spectrum Fitting (ASF) methods using UV–Vis absorbance spectroscopy. Some physicochemical and pharmacokinetic parameters have been determined through in silico SwissADME technique.
- 6 August 2024
- Published by Elsevier in Food Chemistry
- Vol. 460 (Pt 3) , 140790
A new and highly efficient source of t-resveratrol: Cephalaria Syriaca (L.) Roem. & Schult.
- 6 August 2024
- Published by Elsevier in Food Chemistry
- Vol. 460 (Pt 3) , 140790
A new and highly efficient source of t-resveratrol: Cephalaria Syriaca (L.) Roem. & Schult.
- 15 July 2024
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 7 (4) , 649-653
Determination of the Chemical Content of Shilajit in Terms of Ten Different Polyphenolic Compounds by UAE Method and HPLC Analysis
Shilajit (Mumio) is a complex of natural bioactive compounds that has historically been used as a therapeutic cream for many skin diseases. It is also used in traditional medicine for diseases such as diabetes Alzheimer's and cancer. In this study, to determine the polyphenolic content of Shilajit, ultrasound assisted extracts (UAE) were obtained at 45 °C and analyzed by High Performance Liquid Chromatography-Ultraviolet (HPLC-UV) for the quantitative analysis of ten different polyphenolic compounds. Such a comprehensive content analysis has not been done for Shilajit before. As a result of the experimental study, 28.99±1.23 µg/g rutin, 25.47±1.67 µg/g ferulic acid, 41.49±0.41 µg/g resveratrol and 532.19±8.21 µg/g taxifolin was determined. In this study, 532.19±8.21 µg/g of taxifolin, which is found to be very effective against many diseases in the literature, is a very high value compared to the literature. The results of this research will shed an important light to researchers working in the fields of extraction of bioactive substances, food supplement production and pharmaceutical applications.
- 15 July 2024
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- Vol. 7 (4) , 649-653
Determination of the Chemical Content of Shilajit in Terms of Ten Different Polyphenolic Compounds by UAE Method and HPLC Analysis
Shilajit (Mumio) is a complex of natural bioactive compounds that has historically been used as a therapeutic cream for many skin diseases. It is also used in traditional medicine for diseases such as diabetes Alzheimer's and cancer. In this study, to determine the polyphenolic content of Shilajit, ultrasound assisted extracts (UAE) were obtained at 45 °C and analyzed by High Performance Liquid Chromatography-Ultraviolet (HPLC-UV) for the quantitative analysis of ten different polyphenolic compounds. Such a comprehensive content analysis has not been done for Shilajit before. As a result of the experimental study, 28.99±1.23 µg/g rutin, 25.47±1.67 µg/g ferulic acid, 41.49±0.41 µg/g resveratrol and 532.19±8.21 µg/g taxifolin was determined. In this study, 532.19±8.21 µg/g of taxifolin, which is found to be very effective against many diseases in the literature, is a very high value compared to the literature. The results of this research will shed an important light to researchers working in the fields of extraction of bioactive substances, food supplement production and pharmaceutical applications.
- 9 February 2024
- Published by Elsevier in Microchemical Journal
- Vol. 198
Investigation of ziziphus jujube seeds as a new source of taxifolin and silibinin with three different extraction methods
- 9 February 2024
- Published by Elsevier in Microchemical Journal
- Vol. 198
Investigation of ziziphus jujube seeds as a new source of taxifolin and silibinin with three different extraction methods
- 2 August 2023
- Published by Springer Nature in Journal of Fluorescence
- Vol. 34 (3) , 1319-1342
A Novel Naphthylidene-diimine Chemosensor for Selective Colorimetric and Fluorometric Detection of Al3+ and CN− Ions
A naphthylidene-diimine L2 was newly designed, and its structure was identified by elemental analysis and spectroscopic methods. The effect of temperature, acid–base and light on enol–keto tautomerism in this Schiff base was evaluated by colorimetry, UV–Vis and fluorescence spectroscopy. Under irradiation 365 nm, L2 emitted yellow, orange and strong green emission in pure, basic and aqueous DMSO media (v/v, 1/1), respectively. Its ionochromic behavior against various cations (Fe3+, Al3+, Cr3+, Cu2+, Co2+, Ni2+, Zn2+, Cd2+, Pb2+, Ba2+ and Ag+) and anions (F−, Cl−, CH3COO−, SO32–, S2O32−, HSO4−, H2PO4−, NO3−, CN−, and OH−) was investigated in aqueous DMSO media (v/v, 1/1) by UV–Vis and fluorescence experiments. Dark yellow color of L2 changed to colorless for Fe3+, Cr3+ and HSO4− ions, and turned to light yellow for Al3+ and Cu2+ ions, and to orange for CN− and OH− ions. According to UV–Vis data, the chemosensor displayed selective recognition towards Fe3+, Al3+, Cu2+, HSO4−, CN− and OH− with a 1:1 stoichiometric ratio. At the excitation wavelength of 365 nm, L2 gave strong yellowish white emission (λem = 445 and 539 nm) in the presence of Al3+, and the intensity increased about 12.5 times. On the other hand, the chemosensor displayed one emission band at 452 nm and 450 nm in the presence of CN− and OH− with 1.9 fold and 2.3 fold fluorescence enhancement, respectively.
- 2 August 2023
- Published by Springer Nature in Journal of Fluorescence
- Vol. 34 (3) , 1319-1342
A Novel Naphthylidene-diimine Chemosensor for Selective Colorimetric and Fluorometric Detection of Al3+ and CN− Ions
A naphthylidene-diimine L2 was newly designed, and its structure was identified by elemental analysis and spectroscopic methods. The effect of temperature, acid–base and light on enol–keto tautomerism in this Schiff base was evaluated by colorimetry, UV–Vis and fluorescence spectroscopy. Under irradiation 365 nm, L2 emitted yellow, orange and strong green emission in pure, basic and aqueous DMSO media (v/v, 1/1), respectively. Its ionochromic behavior against various cations (Fe3+, Al3+, Cr3+, Cu2+, Co2+, Ni2+, Zn2+, Cd2+, Pb2+, Ba2+ and Ag+) and anions (F−, Cl−, CH3COO−, SO32–, S2O32−, HSO4−, H2PO4−, NO3−, CN−, and OH−) was investigated in aqueous DMSO media (v/v, 1/1) by UV–Vis and fluorescence experiments. Dark yellow color of L2 changed to colorless for Fe3+, Cr3+ and HSO4− ions, and turned to light yellow for Al3+ and Cu2+ ions, and to orange for CN− and OH− ions. According to UV–Vis data, the chemosensor displayed selective recognition towards Fe3+, Al3+, Cu2+, HSO4−, CN− and OH− with a 1:1 stoichiometric ratio. At the excitation wavelength of 365 nm, L2 gave strong yellowish white emission (λem = 445 and 539 nm) in the presence of Al3+, and the intensity increased about 12.5 times. On the other hand, the chemosensor displayed one emission band at 452 nm and 450 nm in the presence of CN− and OH− with 1.9 fold and 2.3 fold fluorescence enhancement, respectively.
- 17 November 2021
- Published by Springer Nature in Food Analytical Methods
- Vol. 15 (4) , 877-889
Berberis Vulgaris Fruit: Determination of Phenolic Compounds in Extracts Obtained by Supercritical CO2 and Soxhlet Methods Using HPLC
Recently, research studies on nutraceutically important polyphenolic substances have attracted intensive attention. Berberis vulgaris is an important source of polyphenolic compounds and is often used in traditional medicine. In this study, the extraction of rutin and apigenin rich oil from Berberis vulgaris fruits was evaluated by supercritical carbon dioxide (Sc-CO2) extraction method with and without co-solvent. As valuable antioxidants, rutin and apigenin content of extracts were analyzed by HPLC, and their amounts were maximized via parametric optimization. The rutin compound studied in this research has the potential to be a drug against the COVID-19 virus. The operating conditions were considered in the range of 35–70 °C temperatures, 140–240 bar of pressures, 0.35–1.00 mm of mean particle sizes, 3–7 l/min of CO2 flow rates, and 0–8% w/w co-solvent. As a result of Sc-CO2 extractions, the amounts of rutin and apigenin were found as 173 ± 14.97 µg/g and 2.91 ± 0.11 µg/g, respectively, with the 8% (w/w) co-solvent addition. The amounts of rutin and apigenin obtained by Soxhlet extractions were found as 208.81 ± 8.48 µg/g and 6.55 ± 0.21 µg/g, respectively. When the Sc-CO2 method was compared with the Soxhlet method, it was seen that the fast and eco-friendly Sc-CO2 method was an ideal extraction method by providing 76.89% rutin and 44.53% apigenin recoveries. As a result of this study, the maximum extraction conditions for rutin and apigenin were obtained as 160 bar, 40 °C, 0.35 mm particle size, 3 l/min CO2, 8% w/w co-solvent ratio, and 120 min extraction period. Graphical abstract
- 17 November 2021
- Published by Springer Nature in Food Analytical Methods
- Vol. 15 (4) , 877-889
Berberis Vulgaris Fruit: Determination of Phenolic Compounds in Extracts Obtained by Supercritical CO2 and Soxhlet Methods Using HPLC
Recently, research studies on nutraceutically important polyphenolic substances have attracted intensive attention. Berberis vulgaris is an important source of polyphenolic compounds and is often used in traditional medicine. In this study, the extraction of rutin and apigenin rich oil from Berberis vulgaris fruits was evaluated by supercritical carbon dioxide (Sc-CO2) extraction method with and without co-solvent. As valuable antioxidants, rutin and apigenin content of extracts were analyzed by HPLC, and their amounts were maximized via parametric optimization. The rutin compound studied in this research has the potential to be a drug against the COVID-19 virus. The operating conditions were considered in the range of 35–70 °C temperatures, 140–240 bar of pressures, 0.35–1.00 mm of mean particle sizes, 3–7 l/min of CO2 flow rates, and 0–8% w/w co-solvent. As a result of Sc-CO2 extractions, the amounts of rutin and apigenin were found as 173 ± 14.97 µg/g and 2.91 ± 0.11 µg/g, respectively, with the 8% (w/w) co-solvent addition. The amounts of rutin and apigenin obtained by Soxhlet extractions were found as 208.81 ± 8.48 µg/g and 6.55 ± 0.21 µg/g, respectively. When the Sc-CO2 method was compared with the Soxhlet method, it was seen that the fast and eco-friendly Sc-CO2 method was an ideal extraction method by providing 76.89% rutin and 44.53% apigenin recoveries. As a result of this study, the maximum extraction conditions for rutin and apigenin were obtained as 160 bar, 40 °C, 0.35 mm particle size, 3 l/min CO2, 8% w/w co-solvent ratio, and 120 min extraction period. Graphical abstract
- 2 September 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 36 (4) , 1775-1784
Boylu ardıç (Juniperus excelsa M. Bieb) meyvelerinde silibinin ve rutin bileşenlerinin deneysel tasarım metodu kullanılarak sokshlet özütleme şartlarının belirlenmesi
Bu çalışmada Ardıç bitkisi meyvelerinden deneysel tasarım yöntemiyle tasarlanan ekstraksiyon deneyleri gerçekleştirilmiş ve ekstraktlar içerisindeki Silibinin ve Rutin bileşiklerinin miktarları araştırılmıştır. Ardıç bitkisi geleneksel tıpta yüz yıllardır tedavi amaçlı olarak kullanıldığı için bilimsel çalışmalarda üzerinde araştırmaların yoğunlukla yapılan bir bitkidir. Geleneksel tıpta idrar söktürücü, iltihap önleyici, ağrı kesici, karaciğer koruyucu, anti mikrobiyal ve anti bakteriyel etkileri bilinmektedir. Bağımsız parametreler olan Etanol/su oranı ve özütleme süresinin aktif madde verimlerine etkisi, Design Expert 11 (Demo) programı kullanılarak tasarlanmış ve araştırılmıştır. Soxhlet yöntemi için özütte bulunan silibinin ve rutin etken maddelerinin maksimum miktarını veren matematiksel modeller elde edilmiştir. Çalışmada elde edilen modellerin önerdiği optimum çalışma koşulları ile deneysel sonuçların uyumlu olduğu görülmüştür. Deneysel çalışmaların sonucu olarak ardıç meyvelerinde en yüksek silibinin ve rutin miktarları sırasıyla 17,9 μg/g ve 261,8 μg/g bulunmuştur.
- 2 September 2021
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 36 (4) , 1775-1784
Boylu ardıç (Juniperus excelsa M. Bieb) meyvelerinde silibinin ve rutin bileşenlerinin deneysel tasarım metodu kullanılarak sokshlet özütleme şartlarının belirlenmesi
Bu çalışmada Ardıç bitkisi meyvelerinden deneysel tasarım yöntemiyle tasarlanan ekstraksiyon deneyleri gerçekleştirilmiş ve ekstraktlar içerisindeki Silibinin ve Rutin bileşiklerinin miktarları araştırılmıştır. Ardıç bitkisi geleneksel tıpta yüz yıllardır tedavi amaçlı olarak kullanıldığı için bilimsel çalışmalarda üzerinde araştırmaların yoğunlukla yapılan bir bitkidir. Geleneksel tıpta idrar söktürücü, iltihap önleyici, ağrı kesici, karaciğer koruyucu, anti mikrobiyal ve anti bakteriyel etkileri bilinmektedir. Bağımsız parametreler olan Etanol/su oranı ve özütleme süresinin aktif madde verimlerine etkisi, Design Expert 11 (Demo) programı kullanılarak tasarlanmış ve araştırılmıştır. Soxhlet yöntemi için özütte bulunan silibinin ve rutin etken maddelerinin maksimum miktarını veren matematiksel modeller elde edilmiştir. Çalışmada elde edilen modellerin önerdiği optimum çalışma koşulları ile deneysel sonuçların uyumlu olduğu görülmüştür. Deneysel çalışmaların sonucu olarak ardıç meyvelerinde en yüksek silibinin ve rutin miktarları sırasıyla 17,9 μg/g ve 261,8 μg/g bulunmuştur.
- 6 June 2021
- Published by Springer Nature in Chemical Papers
- Vol. 75 (10) , 5363-5373
Extraction and quantification of some valuable flavonoids from pinecone of Pinus brutia via Soxhlet and Supercritical CO2 extraction: a comparison study
In this study, the extraction of oil from pinecone of Pinus brutia was evaluated by supercritical CO2 (Sc-CO2) and Soxhlet extraction methods. The quercetin, rutin and kaempferol (QRK) contents of oil were analyzed one by one via HPLC. The rutin compound investigated in this study has the potential to be a drug against the COVID 19 virus. SEM and BET analysis were performed to observe the structural change and increase in surface area after Sc-CO2 extraction. The operating conditions were investigated in the range of 35–65 °C temperatures, 140–220 bar of pressures, 0.30–1.00 mm of mean particle sizes, 3–7 l/min of CO2 flow rates, 0–8% w/w co-solvent and 30–150 min extraction periods. When the results obtained by the Sc-CO2 method were compared with the results of Soxhlet extraction method, the maximum recovery of total QRK was found 4.18% in co-solvent-free studies and 30.94% in co-solvent-added Sc-CO2 studies. Sc-CO2 extraction results of Q, R, and K were found as 14.75 ± 1.08 µg/g, 14.23 ± 1.27 µg/g, and 15.70 ± 1.13 µg/g pinecone, respectively. Soxhlet extraction results of Q, R, and K were found as 36.43 ± 2.26 μg/g, 57.19 ± 3.81 μg/g, and 50.80 ± 2.79 μg/g pinecone, respectively. The maximum amount of QRK was found as 44.68 ± 2.89 μg/g pinecone by Sc-CO2 method via adding 8% ethanol by mass and as 144.42 ± 5.39 μg/g pinecone by Soxhlet method. According to the reference Soxhlet method efficiency, the Sc-CO2 extraction recovery was found as 30.94%. Graphic abstract
- 6 June 2021
- Published by Springer Nature in Chemical Papers
- Vol. 75 (10) , 5363-5373
Extraction and quantification of some valuable flavonoids from pinecone of Pinus brutia via Soxhlet and Supercritical CO2 extraction: a comparison study
In this study, the extraction of oil from pinecone of Pinus brutia was evaluated by supercritical CO2 (Sc-CO2) and Soxhlet extraction methods. The quercetin, rutin and kaempferol (QRK) contents of oil were analyzed one by one via HPLC. The rutin compound investigated in this study has the potential to be a drug against the COVID 19 virus. SEM and BET analysis were performed to observe the structural change and increase in surface area after Sc-CO2 extraction. The operating conditions were investigated in the range of 35–65 °C temperatures, 140–220 bar of pressures, 0.30–1.00 mm of mean particle sizes, 3–7 l/min of CO2 flow rates, 0–8% w/w co-solvent and 30–150 min extraction periods. When the results obtained by the Sc-CO2 method were compared with the results of Soxhlet extraction method, the maximum recovery of total QRK was found 4.18% in co-solvent-free studies and 30.94% in co-solvent-added Sc-CO2 studies. Sc-CO2 extraction results of Q, R, and K were found as 14.75 ± 1.08 µg/g, 14.23 ± 1.27 µg/g, and 15.70 ± 1.13 µg/g pinecone, respectively. Soxhlet extraction results of Q, R, and K were found as 36.43 ± 2.26 μg/g, 57.19 ± 3.81 μg/g, and 50.80 ± 2.79 μg/g pinecone, respectively. The maximum amount of QRK was found as 44.68 ± 2.89 μg/g pinecone by Sc-CO2 method via adding 8% ethanol by mass and as 144.42 ± 5.39 μg/g pinecone by Soxhlet method. According to the reference Soxhlet method efficiency, the Sc-CO2 extraction recovery was found as 30.94%. Graphic abstract
- 8 December 2017
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 32 (4) , 1233-1242
Süper kritik CO2 özütlemesi ile iğde çekirdeklerinden quercetin miktarının yüzey cevap metodu ile optimizasyonu
Bu çalışma ile iğde çekirdeğinin süper kritik karbon dioksit çözücüsü ile özütlenmesi yöntemi kullanılarak çekirdek özütünün elde edilmesi ve UV dedektörlü HPLC cihazı ile içerdiği quercetin miktarının belirlenmesi gerçekleştirildi. Deneysel sonuçlar “Design Expert 7.0 (deneme)” programı kullanılarak analiz edildi. Özütleme koşullarındaki sıcaklık ve basınç artışının quercetin miktarında önemli bir artışa neden olduğu görüldü. Partikül boyutu ve özütleme süresi parametreleri çalışmanın başında parametrik olarak çalışıldı ve bu parametreler quercetin miktarının en yüksek olması prensibine göre belirlendi. Çalışmalarda küçük partikül boyutunun 0,5 mm ve 120 min özütleme süresinin uygun olduğu belirlendi. Bu parametrelerin belirlenmesinden sonra basınç ve sıcaklık optimizasyonu için yüzey cevap yöntemi ile belirlenen deneysel tasarım deneysel şartları kullanıldı. En yüksek quercetin miktarına ulaşmak için yapılan çalışmalar ile optimize edilen sıcaklık ve basınç değerleri 65°C ve 311 bar olarak belirlendi. En yüksek yağ miktarı ise 48,68 mg/g numune olarak kaydedildi. Dizayn modelinin sunduğu optimum şartlardaki kontrol deneyleri sonrasında quercetin miktarı deneysel olarak 9,44 µg quercetin/100 g numune olarak ve Desing Expert 7.0 (deneme) programınca tahmin edilen 9,49 µg quercetin/100 g numune değerine oldukça yakın şekilde ve modele uygun olarak bulunmuştur.
- 8 December 2017
- Published by Journal of the Faculty of Engineering and Architecture of Gazi University in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
- Vol. 32 (4) , 1233-1242
Süper kritik CO2 özütlemesi ile iğde çekirdeklerinden quercetin miktarının yüzey cevap metodu ile optimizasyonu
Bu çalışma ile iğde çekirdeğinin süper kritik karbon dioksit çözücüsü ile özütlenmesi yöntemi kullanılarak çekirdek özütünün elde edilmesi ve UV dedektörlü HPLC cihazı ile içerdiği quercetin miktarının belirlenmesi gerçekleştirildi. Deneysel sonuçlar “Design Expert 7.0 (deneme)” programı kullanılarak analiz edildi. Özütleme koşullarındaki sıcaklık ve basınç artışının quercetin miktarında önemli bir artışa neden olduğu görüldü. Partikül boyutu ve özütleme süresi parametreleri çalışmanın başında parametrik olarak çalışıldı ve bu parametreler quercetin miktarının en yüksek olması prensibine göre belirlendi. Çalışmalarda küçük partikül boyutunun 0,5 mm ve 120 min özütleme süresinin uygun olduğu belirlendi. Bu parametrelerin belirlenmesinden sonra basınç ve sıcaklık optimizasyonu için yüzey cevap yöntemi ile belirlenen deneysel tasarım deneysel şartları kullanıldı. En yüksek quercetin miktarına ulaşmak için yapılan çalışmalar ile optimize edilen sıcaklık ve basınç değerleri 65°C ve 311 bar olarak belirlendi. En yüksek yağ miktarı ise 48,68 mg/g numune olarak kaydedildi. Dizayn modelinin sunduğu optimum şartlardaki kontrol deneyleri sonrasında quercetin miktarı deneysel olarak 9,44 µg quercetin/100 g numune olarak ve Desing Expert 7.0 (deneme) programınca tahmin edilen 9,49 µg quercetin/100 g numune değerine oldukça yakın şekilde ve modele uygun olarak bulunmuştur.