Nedim Gürler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nedim Gürler has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Gülben Torğut
Department of Chemistry and Chemical Processes Tunceli Vocational School Munzur University Tunceli Turkey
4 shared publications - Ferit Can Yazdıç
Munzur University
2 shared publications Gülben Torğut
Department of Hotel Restaurant and Catering Services, Tunceli Vocational School Munzur University Tunceli Turkey
2 shared publicationsA. Karaman
Munzur University, Tunceli Vocational School, Department of Medical Services and Techniques, Tunceli, Turkey
1 shared publication- Altuğ Karaman
Munzur Üniversitesi
1 shared publication - Aygün Kiliç
Munzur University
1 shared publication
Latest Publications
- 20 August 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (8)
Development and Characterization of Starch/Microcrystalline Cellulose/Bentonite Intelligent Packaging Films Incorporated With Red Beet Peel Extract for Monitoring Chicken Freshness
This study presents the physical, mechanical, antioxidant, and application properties of films prepared by adding red beet peel extract to the starch/microcrystalline cellulose/bentonite clay polymer composites by casting method to monitor chicken breast freshness. The effects of bentonite in different proportions (0%, 1%, 5%, and 10%) were investigated. The structure of the films was elucidated by XRD, FTIR spectroscopy, and SEM for surface morphology of films. Regarding mechanical testing, the highest tensile strength starch/microcrystalline cellulose‐1% bentonite film was 0.88 MPa. It was noticed that water vapor permeability (WVP) improved with the addition of bentonite. Films containing 10% bentonite clay showed a 27% decrease in water vapor permeability compared to films without clay. However, the swelling power of composites increased as the bentonite content increased. Additionally, with the addition of clay the films exhibited more opaque properties. Red beet peel extract was also incorporated to the polymer composite to monitor chicken breast freshness. The antioxidant properties of the films were accomplished using DPPH method. When red beet peel extract was incorporated into the polymer film, the highest DPPH scavenging activity increased by 50%. In summary, starch/microcrystalline cellulose/bentonite films can be used as pH‐sensitive intelligent packaging for controlling the freshness of chicken breast.
- 20 August 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (8)
Development and Characterization of Starch/Microcrystalline Cellulose/Bentonite Intelligent Packaging Films Incorporated With Red Beet Peel Extract for Monitoring Chicken Freshness
This study presents the physical, mechanical, antioxidant, and application properties of films prepared by adding red beet peel extract to the starch/microcrystalline cellulose/bentonite clay polymer composites by casting method to monitor chicken breast freshness. The effects of bentonite in different proportions (0%, 1%, 5%, and 10%) were investigated. The structure of the films was elucidated by XRD, FTIR spectroscopy, and SEM for surface morphology of films. Regarding mechanical testing, the highest tensile strength starch/microcrystalline cellulose‐1% bentonite film was 0.88 MPa. It was noticed that water vapor permeability (WVP) improved with the addition of bentonite. Films containing 10% bentonite clay showed a 27% decrease in water vapor permeability compared to films without clay. However, the swelling power of composites increased as the bentonite content increased. Additionally, with the addition of clay the films exhibited more opaque properties. Red beet peel extract was also incorporated to the polymer composite to monitor chicken breast freshness. The antioxidant properties of the films were accomplished using DPPH method. When red beet peel extract was incorporated into the polymer film, the highest DPPH scavenging activity increased by 50%. In summary, starch/microcrystalline cellulose/bentonite films can be used as pH‐sensitive intelligent packaging for controlling the freshness of chicken breast.
- 9 February 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 59
Multifunctional PLA/PHA-Based films incorporating Moluccella spinosa extract for sustainable and antimicrobial food packaging applications
- 9 February 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (2) , 59
Multifunctional PLA/PHA-Based films incorporating Moluccella spinosa extract for sustainable and antimicrobial food packaging applications
- 11 July 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (42)
Evaluation of Nano‐Zinc Borate Effects on Thermal Properties, Morphology, Antibacterial Activity, and Drug Release Behavior of Starch/Gelatin Hydrogel Films for Biomedical Applications
Starch and gelatin offer opportunities for use due to their non‐toxicity, biocompatibility, physical and functional properties. In this study, different amounts of nano‐zinc borate were added to starch/gelatin composition for biological applications and their properties were studied. The structure of the films was investigated by various techniques. Nanostructured zinc borate was synthesized using a chemical method and particle sizes were determined as 196 nm. The atenolol drug was doped into the polymer composite. The atenolol release was performed at pH 7.4 and in phosphate‐buffered saline solution medium. Cumulative drug release was 76% with the inclusion of nano‐zinc borate in the polymer mixture. The atenolol release was approximately 50%–70% in films with nano‐zinc borate added after 300 min. Furthermore, thermal resistance of the films improved with the addition of nano‐zinc borate. The investigated chemical compound exhibited pronounced antibacterial activity against Gram‐positive bacteria (Bacillus subtilis and Staphylococcus aureus), with significantly greater potency compared to Gram‐negative bacteria (E. coli and Pseudomonas aeruginosa). Notably, the formulation containing 1.5% starch, 0.5% gelatin, and 1% nano‐zinc borate demonstrated broad‐spectrum efficacy against all tested pathogens, highlighting its potential as a promising antibacterial agent. The observed differential activity against bacterial strains suggests that fine‐tuning the concentrations of starch, gelatin, and nano‐zinc borate may optimize antibacterial efficacy and broaden the spectrum. The results showed us that non‐toxic and biocompatible polymer films can be realized in pharmaceutical industry systems and biomedical applications.
- 11 July 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (42)
Evaluation of Nano‐Zinc Borate Effects on Thermal Properties, Morphology, Antibacterial Activity, and Drug Release Behavior of Starch/Gelatin Hydrogel Films for Biomedical Applications
Starch and gelatin offer opportunities for use due to their non‐toxicity, biocompatibility, physical and functional properties. In this study, different amounts of nano‐zinc borate were added to starch/gelatin composition for biological applications and their properties were studied. The structure of the films was investigated by various techniques. Nanostructured zinc borate was synthesized using a chemical method and particle sizes were determined as 196 nm. The atenolol drug was doped into the polymer composite. The atenolol release was performed at pH 7.4 and in phosphate‐buffered saline solution medium. Cumulative drug release was 76% with the inclusion of nano‐zinc borate in the polymer mixture. The atenolol release was approximately 50%–70% in films with nano‐zinc borate added after 300 min. Furthermore, thermal resistance of the films improved with the addition of nano‐zinc borate. The investigated chemical compound exhibited pronounced antibacterial activity against Gram‐positive bacteria (Bacillus subtilis and Staphylococcus aureus), with significantly greater potency compared to Gram‐negative bacteria (E. coli and Pseudomonas aeruginosa). Notably, the formulation containing 1.5% starch, 0.5% gelatin, and 1% nano‐zinc borate demonstrated broad‐spectrum efficacy against all tested pathogens, highlighting its potential as a promising antibacterial agent. The observed differential activity against bacterial strains suggests that fine‐tuning the concentrations of starch, gelatin, and nano‐zinc borate may optimize antibacterial efficacy and broaden the spectrum. The results showed us that non‐toxic and biocompatible polymer films can be realized in pharmaceutical industry systems and biomedical applications.
- 1 November 2024
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 73 (11) , 3460-3470
Development of a novel rare earth element doped chitosan-graft-poly(hydroxyethyl methacrylate) composite for biomedical applications: synthesis, characterization, drug delivery, and antibacterial properties
- 1 November 2024
- Published by Springer Nature in Russian Chemical Bulletin
- Vol. 73 (11) , 3460-3470
Development of a novel rare earth element doped chitosan-graft-poly(hydroxyethyl methacrylate) composite for biomedical applications: synthesis, characterization, drug delivery, and antibacterial properties
- 20 February 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (5) , 2230-2240
Evaluation of effect of boric acid on thermoplastic starch: Morphological, mechanical, barrier, and optical properties
In this study, starch was modified with different amounts of boric acid, and the degree of substitution of the synthesized compounds at different temperatures and times was determined by Fourier transform infrared (FTIR) and titration methods. The degrees of substitution in both methods showed similar tendency. Optimum conditions were determined, and thermoplastic starch (TPS) and boric acid (B) films were prepared by casting method using glycerol as plasticizer. The morphological properties of the films were studied by scanning electron microscope‐energy dispersive spectrometry (SEM‐EDS). According to the FTIR results, it was observed that the BO and BOC stretching vibrations increased when the amount of boric acid increased. The tensile strength, water barrier (swelling capacity, solubility, and water vapor permeability), and optical properties of samples were investigated. The swelling capacity, solubility, and water vapor permeability of the films decreased with the addition of 0.5% boric acid to the starch, but the highest tensile strength was achieved. The tensile strength for TPSB0.5% increased compared to control group TPS. In addition, the film showed the highest transparency. Thermoplastic film containing 0.5% boric acid can be used as a packaging material due to its improved mechanical and water barrier.Highlights: The thermoplastic starch and boric acid composite were successfully produced. The presence of boric acid was confirmed by energy dispersive spectrometry (EDS). The degree of substitution was determined by two different methods. Transparency increased with the addition of boric acid. Tensile strength improved with boric acid content.
- 20 February 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (5) , 2230-2240
Evaluation of effect of boric acid on thermoplastic starch: Morphological, mechanical, barrier, and optical properties
In this study, starch was modified with different amounts of boric acid, and the degree of substitution of the synthesized compounds at different temperatures and times was determined by Fourier transform infrared (FTIR) and titration methods. The degrees of substitution in both methods showed similar tendency. Optimum conditions were determined, and thermoplastic starch (TPS) and boric acid (B) films were prepared by casting method using glycerol as plasticizer. The morphological properties of the films were studied by scanning electron microscope‐energy dispersive spectrometry (SEM‐EDS). According to the FTIR results, it was observed that the BO and BOC stretching vibrations increased when the amount of boric acid increased. The tensile strength, water barrier (swelling capacity, solubility, and water vapor permeability), and optical properties of samples were investigated. The swelling capacity, solubility, and water vapor permeability of the films decreased with the addition of 0.5% boric acid to the starch, but the highest tensile strength was achieved. The tensile strength for TPSB0.5% increased compared to control group TPS. In addition, the film showed the highest transparency. Thermoplastic film containing 0.5% boric acid can be used as a packaging material due to its improved mechanical and water barrier.Highlights: The thermoplastic starch and boric acid composite were successfully produced. The presence of boric acid was confirmed by energy dispersive spectrometry (EDS). The degree of substitution was determined by two different methods. Transparency increased with the addition of boric acid. Tensile strength improved with boric acid content.
- 13 February 2024
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 59 (4) , 2400-2410
Physical and biological characteristics of eco‐friendly films added with Cinnamomum zeylanicum extract for packaging materials
Summary: The effects of Cinnamomum zeylanicum extract (CZE) at different rations (0%, 1%, 3% and 5%) on gelatin (GL)–polyvinyl alcohol (PVA) blend films were evaluated in relation to the structural, tensile strength, physical, antimicrobial and antioxidant properties of the films in this study. The results showed that water barriers of the film samples decreased, but the UV‐blocking property increased and became opaque at the highest GLPVA5 film. The tensile strengths of GLPVA, GLPVA1, GLPVA3 and GLPVA5 films were 1.21, 1.78, 1.62 and 1.95 MPa, respectively. The antimicrobial effect of these films was determined against Escherichia coli, Enterococcus faecalis, Salmonella typhimurium and Bacillus cereus according to the parallel stick method. Antioxidant properties of cinnamon extract were investigated using 2,2‐diphenyl‐1‐picryl‐hydrazil (DPPH) methods. The % inhibition of DPPH was found to be 82.00. No antibacterial effect was detected for B.cereus and E. faecalis at 0%, 1%, 3% and 5%. While no activity was observed in 0%, 1% and 3% cinnamon, 7.5 and 3.0 mm zones were detected in S. typhimirium and E. coli, respectively, in 5% cinnamon. The results suggest that the film samples could be used in a potential packaging with antioxidant and antibacterial properties.
- 13 February 2024
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 59 (4) , 2400-2410
Physical and biological characteristics of eco‐friendly films added with Cinnamomum zeylanicum extract for packaging materials
Summary: The effects of Cinnamomum zeylanicum extract (CZE) at different rations (0%, 1%, 3% and 5%) on gelatin (GL)–polyvinyl alcohol (PVA) blend films were evaluated in relation to the structural, tensile strength, physical, antimicrobial and antioxidant properties of the films in this study. The results showed that water barriers of the film samples decreased, but the UV‐blocking property increased and became opaque at the highest GLPVA5 film. The tensile strengths of GLPVA, GLPVA1, GLPVA3 and GLPVA5 films were 1.21, 1.78, 1.62 and 1.95 MPa, respectively. The antimicrobial effect of these films was determined against Escherichia coli, Enterococcus faecalis, Salmonella typhimurium and Bacillus cereus according to the parallel stick method. Antioxidant properties of cinnamon extract were investigated using 2,2‐diphenyl‐1‐picryl‐hydrazil (DPPH) methods. The % inhibition of DPPH was found to be 82.00. No antibacterial effect was detected for B.cereus and E. faecalis at 0%, 1%, 3% and 5%. While no activity was observed in 0%, 1% and 3% cinnamon, 7.5 and 3.0 mm zones were detected in S. typhimirium and E. coli, respectively, in 5% cinnamon. The results suggest that the film samples could be used in a potential packaging with antioxidant and antibacterial properties.
- Open Access
- 18 January 2024
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (10) , 8883-8900
Enhanced impedance, electrical conductivity, dielectric properties for colloidal starch-g-poly (methyl methacrylate) supported with semiconductor cadmium sulfide
In this study, starch-graft-poly (methyl methacrylate) (starch-g-PMMA) composites doped with different amounts (5, 10, and 15 wt%) of cadmium sulfide (CdS) particles were fabricated for electrical measurements using in-situ polymerization technique. The structural characterization of the samples was studied. The dielectric and conductivity properties of the composites were investigated using impedance analyzer depending on the frequency (100 Hz–20 kHz) at room temperature. Spectroscopy revealed that the dielectric constant (ε′), dielectric loss (ε′′), and real (Z) components of impedance are found to decrease with increasing frequency for both starch-g-PMMA and starch-g-PMMA (5, 10, and 15 wt%) composites. On the contrary, the AC conductivity (σac) of samples increased with increasing frequency. In addition, ε′ and ε′′ values of starch-g-PMMA were lower than composites that added CdS. When the CdS content increased from 0 to 15%, ε′ increased from 5.62 to 15.10 at 100 Hz. AC conductivity was improved after adding the CdS particles. The maximum conductivity value for starch-g-PMMA15%CdS is found to be 3.07 × 10–7 at 100 Hz. When the dielectric properties of composites are evaluated, it is concluded that it is an exciting material for electronic applications in technology.
- 18 January 2024
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (10) , 8883-8900
Open AccessEnhanced impedance, electrical conductivity, dielectric properties for colloidal starch-g-poly (methyl methacrylate) supported with semiconductor cadmium sulfide
In this study, starch-graft-poly (methyl methacrylate) (starch-g-PMMA) composites doped with different amounts (5, 10, and 15 wt%) of cadmium sulfide (CdS) particles were fabricated for electrical measurements using in-situ polymerization technique. The structural characterization of the samples was studied. The dielectric and conductivity properties of the composites were investigated using impedance analyzer depending on the frequency (100 Hz–20 kHz) at room temperature. Spectroscopy revealed that the dielectric constant (ε′), dielectric loss (ε′′), and real (Z) components of impedance are found to decrease with increasing frequency for both starch-g-PMMA and starch-g-PMMA (5, 10, and 15 wt%) composites. On the contrary, the AC conductivity (σac) of samples increased with increasing frequency. In addition, ε′ and ε′′ values of starch-g-PMMA were lower than composites that added CdS. When the CdS content increased from 0 to 15%, ε′ increased from 5.62 to 15.10 at 100 Hz. AC conductivity was improved after adding the CdS particles. The maximum conductivity value for starch-g-PMMA15%CdS is found to be 3.07 × 10–7 at 100 Hz. When the dielectric properties of composites are evaluated, it is concluded that it is an exciting material for electronic applications in technology.
- Open Access
- 15 March 2023
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 26 (1) , 154-165
PHYSICAL AND ANTIBACTERIAL ACTIVITIES OF 3-APTMS REINFORCED CHITOSAN-POLYVINYL ALCOHOL BLEND FILMS
Bu çalışmada kitosan (KT) ve polivinil alkol (PA) karışımına %0, %0.5, %1 ve %2 oranlarında 3-(aminopropil) trimetoksi silan (3-APTMS) ilave edilerek dökme metoduyla filmler hazırlanmıştır. Hazırlanan filmlerin FTIR, SEM, su buharı geçirgenliği, çözünürlük, opaklık ve renk özellikleri incelenmiştir. KT/PA, KT/PA-0.5, KT/PA-1 ve KT/PA-2 filmlerinin su buharı geçirgenliği sırasıyla 3.82×10-6 g m-1 s-1 Pa-1, 3.14×10-6 g m-1 s-1 Pa-1, 2.08×10-6 g m-1 s-1 Pa-1 ve 1.59×10-6 g m-1 s-1 Pa-1 olarak gerçekleşti. Filmleri su içinde çözünürlüğü azaldı. Artan 3-APTMS içeriği ile filmler daha opak oldu ve UV ışık bariyer özellik gösterdi. Renk özellikleri ise a* değeri artarken b* değeri ise azalarak filmler sarımsı-yeşil oldu. Ayrıca filmlerin Gram negatif (E. coli ) ve gram pozitif (S. aureus subsp. aureus) bakterilere karşı antimikrobiyal aktiviteleri değerlendirildi. Elde edilen KT/PA tek başına S. aureus subsp. aureus (ATCC 25923) ve E. coli (ATCC 25922) ye karşı herhangi bir antimikrobiyal aktiviteyi göstermedi. Dikkat çeken nokta KT/PA'ya eklenen %2 3-APTMS antibakteriyel aktivitenin standart olarak kullanılan ampisilin ile aynı olmasıdır.
- 15 March 2023
- Published by Kahramanmaras Sutcu Imam University Journal of Engineering Sciences in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
- Vol. 26 (1) , 154-165
Open AccessPHYSICAL AND ANTIBACTERIAL ACTIVITIES OF 3-APTMS REINFORCED CHITOSAN-POLYVINYL ALCOHOL BLEND FILMS
Bu çalışmada kitosan (KT) ve polivinil alkol (PA) karışımına %0, %0.5, %1 ve %2 oranlarında 3-(aminopropil) trimetoksi silan (3-APTMS) ilave edilerek dökme metoduyla filmler hazırlanmıştır. Hazırlanan filmlerin FTIR, SEM, su buharı geçirgenliği, çözünürlük, opaklık ve renk özellikleri incelenmiştir. KT/PA, KT/PA-0.5, KT/PA-1 ve KT/PA-2 filmlerinin su buharı geçirgenliği sırasıyla 3.82×10-6 g m-1 s-1 Pa-1, 3.14×10-6 g m-1 s-1 Pa-1, 2.08×10-6 g m-1 s-1 Pa-1 ve 1.59×10-6 g m-1 s-1 Pa-1 olarak gerçekleşti. Filmleri su içinde çözünürlüğü azaldı. Artan 3-APTMS içeriği ile filmler daha opak oldu ve UV ışık bariyer özellik gösterdi. Renk özellikleri ise a* değeri artarken b* değeri ise azalarak filmler sarımsı-yeşil oldu. Ayrıca filmlerin Gram negatif (E. coli ) ve gram pozitif (S. aureus subsp. aureus) bakterilere karşı antimikrobiyal aktiviteleri değerlendirildi. Elde edilen KT/PA tek başına S. aureus subsp. aureus (ATCC 25923) ve E. coli (ATCC 25922) ye karşı herhangi bir antimikrobiyal aktiviteyi göstermedi. Dikkat çeken nokta KT/PA'ya eklenen %2 3-APTMS antibakteriyel aktivitenin standart olarak kullanılan ampisilin ile aynı olmasıdır.
- 29 December 2022
- Published by Wiley in Polymer Engineering & Science
- Vol. 63 (2) , 426-440
Development of chitosan/gelatin/starch composite edible films incorporated with pineapple peel extract and aloe vera gel: Mechanical, physical, antibacterial, antioxidant, and sensorial analysis
In this study, chitosan (C)/gelatin(G)/starch(S) composites incorporated pineapple peel extract (PPE) and aloe vera gel (AVG) were prepared by the casting method as antioxidant agents. Mechanical, water vapor permeability (WVP), moisture content, solubility, opacity, and color properties of the effects of PPE and AVG at different concentrations (0%, 10%, and 30%) were investigated. The prepared films were characterized by Fourier transform infrared spectroscopy in attenuated total reflection (ATR‐FTIR), X‐ray diffraction (XRD), Thermal gravimetric analysis (TGA), Scanning electron microscope (SEM), mechanical, water barrier, opacity, and color. PPE and AVG extract incorporated edible films improved thermal stability of edible films. Tensile strength decreased with the addition of extracts; the maximum tensile strength was 8.15 MPa for CGS film. The WVP of the films increased with the increasing PPE and AVG concentration. As a biological activity, the films inhibited the growth of gram‐positive (Staphylococcus aureus) and gram‐negative bacteria (Escherichia coli). With the addition of PPE and AVG to the CGS film, its antioxidant properties were enhanced. In addition, the prepared films were applied for strawberry coating both in the refrigerator and at room temperature. Consequently, these edible‐coated films can be used for active food packaging/coating to extend the shelf life of fruits.
- 29 December 2022
- Published by Wiley in Polymer Engineering & Science
- Vol. 63 (2) , 426-440
Development of chitosan/gelatin/starch composite edible films incorporated with pineapple peel extract and aloe vera gel: Mechanical, physical, antibacterial, antioxidant, and sensorial analysis
In this study, chitosan (C)/gelatin(G)/starch(S) composites incorporated pineapple peel extract (PPE) and aloe vera gel (AVG) were prepared by the casting method as antioxidant agents. Mechanical, water vapor permeability (WVP), moisture content, solubility, opacity, and color properties of the effects of PPE and AVG at different concentrations (0%, 10%, and 30%) were investigated. The prepared films were characterized by Fourier transform infrared spectroscopy in attenuated total reflection (ATR‐FTIR), X‐ray diffraction (XRD), Thermal gravimetric analysis (TGA), Scanning electron microscope (SEM), mechanical, water barrier, opacity, and color. PPE and AVG extract incorporated edible films improved thermal stability of edible films. Tensile strength decreased with the addition of extracts; the maximum tensile strength was 8.15 MPa for CGS film. The WVP of the films increased with the increasing PPE and AVG concentration. As a biological activity, the films inhibited the growth of gram‐positive (Staphylococcus aureus) and gram‐negative bacteria (Escherichia coli). With the addition of PPE and AVG to the CGS film, its antioxidant properties were enhanced. In addition, the prepared films were applied for strawberry coating both in the refrigerator and at room temperature. Consequently, these edible‐coated films can be used for active food packaging/coating to extend the shelf life of fruits.
- 23 August 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (32)
Dielectric Biodegradable Biopolymer‐Based Graphene Nanocomposites for Use in the Packaging Industry and Capacitor Application
In this study, polyhydroxyalkanoate (PHA) and polylactic acid (PLA)‐Graphene (G) nanocomposite films were synthesized by taking different concentrations of G via the solution casting process, and their structural, mechanical, opacity, thermal and dielectric properties were examined for the first time. Scanning electron microscopy (SEM) was used for investigating surface morphology. Films containing graphene were more opaque than films without graphene. The incorporation of graphene into the polymer matrix improved the mechanical property. The tensile strengths of the control PHA/PLA film and the graphene‐reinforced 1 %G‐PHA/PLA nanocomposite films were 18.98 and 24.34 MPa, respectively. Thermogravimetric analysis results showed that PHA/PLA−G nanocomposites had good thermal stability below 300 °C. Considering the dielectric measurements, it is seen that the dielectric constant (έ) and dielectric loss (ϵ”) decreased with increasing frequency and less changed at higher frequencies. The developer feature of graphene is remarkable in both parameters. The electrical conductivity of PHA/PLA−G nanocomposites was also examined as a function of frequency at room temperature. As the amount of G increased from 1 %wt to 5 %wt, the conductivity of the composites increased.
- 23 August 2022
- Published by Wiley in ChemistrySelect
- Vol. 7 (32)
Dielectric Biodegradable Biopolymer‐Based Graphene Nanocomposites for Use in the Packaging Industry and Capacitor Application
In this study, polyhydroxyalkanoate (PHA) and polylactic acid (PLA)‐Graphene (G) nanocomposite films were synthesized by taking different concentrations of G via the solution casting process, and their structural, mechanical, opacity, thermal and dielectric properties were examined for the first time. Scanning electron microscopy (SEM) was used for investigating surface morphology. Films containing graphene were more opaque than films without graphene. The incorporation of graphene into the polymer matrix improved the mechanical property. The tensile strengths of the control PHA/PLA film and the graphene‐reinforced 1 %G‐PHA/PLA nanocomposite films were 18.98 and 24.34 MPa, respectively. Thermogravimetric analysis results showed that PHA/PLA−G nanocomposites had good thermal stability below 300 °C. Considering the dielectric measurements, it is seen that the dielectric constant (έ) and dielectric loss (ϵ”) decreased with increasing frequency and less changed at higher frequencies. The developer feature of graphene is remarkable in both parameters. The electrical conductivity of PHA/PLA−G nanocomposites was also examined as a function of frequency at room temperature. As the amount of G increased from 1 %wt to 5 %wt, the conductivity of the composites increased.