MIMarina Maria Ioanniti

Marina Maria Ioanniti

*This is an algorithmically generated author record based on publicly available information.

Marina Maria Ioanniti has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fast Adsorption of Short and Long-Chain Per- and Polyfluoroalkyl Substances from Water by Chemically Modified Sawdust

    by Behnia Bitaraf, Nahid Pervez, Tao Jiang, Marina Maria Ioanniti, Haralabos Efstathiadis, Mehmet V. Yigit, Yanna Liang

    To remove per- and polyfluoroalkyl substances (PFAS) from water, this study focused on synthesizing a sawdust-based adsorbent through KMnO4 oxidation and coating m-phenylenediamine (mPD) onto the sawdust’s surface. The resulting sawdust/MnO2/PmPD was able to remove >90% of nine target PFAS and >80% of GenX spiked at 10 ppb in deionized water. When added to river water samples, the capture of long-chain PFAS remained basically the same. This was in line with the observations that environmental factors, such as a change of pH between 4.0 and 11.0, the presence of natural organic matter in the range of 0 and 100 mg L–1, and the presence of bicarbonate, nitrate, and chloride, each at 1 mM, did not affect the removal of long-chain PFAS significantly. The low-cost nature of this sorbent was further strengthened by its regenerability and reusability for at least five cycles. To improve the sorption performance, especially for short-chain PFAS, further modification of the sawdust/MnO2/PmPD will need to be performed based on the revealed mechanisms underlying PFAS capture. Overall, at this stage, the sawdust/MnO2/PmPD material is ready to be used for removing PFAS from surface water.


  • Open Access

    Cationically Modified PVA-Based Electrospun Nanofiber Membrane for Adsorptive PFAS Removal from Water

    by Nahid Pervez, Tao Jiang, Boyu Li, Behnia Bitaraf, Aswin Kumar Ilango, Marina Maria Ioanniti, Caroline Schaeffer, Haralabos Efstathiadis, Mehmet V. Yigit, Yanna Liang

    Per- and polyfluoroalkyl substances (PFAS), a diverse range of anthropogenic organic compounds, pose significant concerns to society due to their potential harmful impacts on human health and ecosystems. While there are other methods for removing PFAS from water, adsorption remains a viable and efficient option. The present research reports an adsorptive nanofiber membrane prepared through electrospinning in the presence of poly­(vinyl alcohol) (PVA) and a cationic surfactant, cetyltrimethylammonium chloride (CTAC), blended solution. This modified PVA membrane was observed to achieve nearly 100% capture of all 10 target PFAS, each at 10 μg/L in deionized water. The pseudo-second-order model most accurately represented the adsorption kinetics, characterized by rapid adsorption (within 60 s). The Toth isotherm model effectively fitted the isotherm data, indicating that the adsorption of PFAS onto the membrane involved complex interactions. The hypothesized adsorption mechanisms, including electrostatic and hydrophobic interactions, were validated through detailed adsorption kinetics, isotherms, thermodynamic analyses, and physicochemical characterization. Remarkably, the performance of the modified system remained unaffected by variations in solution pH and natural organic matter, while being slightly affected by ionic strength, with 90–100% removal effectiveness of PFAS in stormwater. This work highlights the significance of electrospun nanofiber membrane-based adsorbents for the efficient removal of PFAS from real water.


  • Energy-dense Li metal anodes enabled by thin film electrolytes

    by Marina Maria Ioanniti, Fei Hu, Wyatt E. Tenhaeff

    Next-generation, energy-dense, rechargeable lithium batteries require Li metal anodes that provide ten times the specific capacity of state-of-the-art graphite anodes. But, there are many challenges to the successful utilization of Li anodes, including high chemical reactivity and the propensity to deposit into non-dense, high surface area morphologies, which can result in dendritic growth and significant, associated safety hazards, such as short-circuiting and potential combustion of the liquid electrolyte. Solid-state thin film electrolytes have been used to address both of these challenges. In this review, we will provide an overview of thin film battery designs, highlighting the role of thin film electrolytes, lithium phosphorous oxynitride (LiPON) in particular, in enabling highly reversible, efficient cycling of Li metal anodes. We then discuss progress in thin film electrolyte compositions and vacuum deposition processing that has occurred in roughly the past 20 years. It will be shown how these novel electrolyte compositions and processing capabilities have been used to integrate thin film electrolytes with bulk Li metal anodes required for large format energy storage cells, such as those used in consumer electronics and electric vehicles. We end the review with a brief outlook on the outstanding questions and potential future research directions.