E. V. Popov
E. V. Popov has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- B. V. Labudin
Northern (Arctic) Federal University
6 shared publications - V. V. Sopilov
Northern (Arctic) Federal University
4 shared publications - Valery Cherednichenko
Northern (Arctic) Federal University Named After M.V. Lomonosov
3 shared publications - I. N. Bardin
Northern (Arctic) Federal University Named After M.V. Lomonosov
2 shared publications A V Karelsky
Northern (Arctic) Federal University named after M.V. Lomonosov, Department of Engineering Structures, Architecture and Graphics, 163002, Arkhangelsk, Russian Federation
1 shared publication- A. Ruslanova
Northern Arctic Fed Univ, Naberezhnaya Severnoy Dviny 22, Arkhangelsk 163002, Russia
1 shared publication
Latest Publications
- Open Access
- 26 February 2026
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 21 (2) , 219-232
Calculation of wood composite wall diaphragms with elastic-plastic fastening elements for cladding
Особенности расчета деревокомпозитных стеновых диафрагм с упругоподатливыми элементами крепления обшивки
- 26 February 2026
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 21 (2) , 219-232
Open AccessCalculation of wood composite wall diaphragms with elastic-plastic fastening elements for cladding
Особенности расчета деревокомпозитных стеновых диафрагм с упругоподатливыми элементами крепления обшивки
- 29 July 2023
- Published by Springer Nature
- p. 663-671
Timber-Composite Panels with Discontinuity in Cladding
- 29 July 2023
- Published by Springer Nature
- p. 663-671
Timber-Composite Panels with Discontinuity in Cladding
- 25 June 2022
- Published by Springer Nature
- p. 213-223
Calculation Features of Deflection of Two-Layer Composite Wooden Beams with Compliant Shear Bonds
- 25 June 2022
- Published by Springer Nature
- p. 213-223
Calculation Features of Deflection of Two-Layer Composite Wooden Beams with Compliant Shear Bonds
- 1 January 2022
- Published by Springer Nature
- p. 217-227
The Stability of Wood Composite Wall Panels with Elastically Deformable Mechanical Links
- 1 January 2022
- Published by Springer Nature
- p. 217-227
The Stability of Wood Composite Wall Panels with Elastically Deformable Mechanical Links
- Open Access
- 1 January 2022
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1211 (1) , 012007
Calculation features of compressed-bent build-up timber columns with nonlinear-deformable shear bracings
Object of research is build-up compressed–bent and eccentrically compressed columns on yielding nonlinear – deformable shear bracings. Purpose of the research is development of a numerical method for calculation of columns, allowing to take in account the influence of deflection of elastic axis of bar on the increment of the bending moment from the action of longitudinal compressive force and the nonlinear dependence between the forces and deformations in the shear bracings. Problem-solving method consists in dividing the column into separate sections, a system of equations is compiled from the condition of equality of the increment of concentrated shears. The loading process is divided into a set number of stages, at each forces in the shear bracings, the stresses in the branches, and the buckling function of the elastic axis of the element are determined. The obtained values of forces in the shear bracings and buckling are used to specify stiffness of the bracings and component of the bending moment arising due to eccentric application of the longitudinal compressive force when longitudinal axis of the element is deflecting. To obtain the resulting values, the obtained forces, deflections and stresses in the branches at each calculation stage are summed up.
- 1 January 2022
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1211 (1) , 012007
Open AccessCalculation features of compressed-bent build-up timber columns with nonlinear-deformable shear bracings
Object of research is build-up compressed–bent and eccentrically compressed columns on yielding nonlinear – deformable shear bracings. Purpose of the research is development of a numerical method for calculation of columns, allowing to take in account the influence of deflection of elastic axis of bar on the increment of the bending moment from the action of longitudinal compressive force and the nonlinear dependence between the forces and deformations in the shear bracings. Problem-solving method consists in dividing the column into separate sections, a system of equations is compiled from the condition of equality of the increment of concentrated shears. The loading process is divided into a set number of stages, at each forces in the shear bracings, the stresses in the branches, and the buckling function of the elastic axis of the element are determined. The obtained values of forces in the shear bracings and buckling are used to specify stiffness of the bracings and component of the bending moment arising due to eccentric application of the longitudinal compressive force when longitudinal axis of the element is deflecting. To obtain the resulting values, the obtained forces, deflections and stresses in the branches at each calculation stage are summed up.
- 7 June 2021
- Published by Springer Nature
- p. 109-116
Calculation of Vertical Deformations of Composite Bending Wooden Structures with Non-linear Behavior of Shear Bonds
- 7 June 2021
- Published by Springer Nature
- p. 109-116
Calculation of Vertical Deformations of Composite Bending Wooden Structures with Non-linear Behavior of Shear Bonds
- 1 January 2020
- Published by M.V. Lomonosov Northern (Arctic) Federal University in Lesnoy Zhurnal (Forestry Journal)
- No. 4,p. 178-189
CONTACT INTERACTION OF A CLAW WASHER WITH WOOD AT LIMITING SHEAR
When designing, manufacturing and maintaining of woodworks and elements of wooden structures it is necessary to solve the problem of providing the calculation of strength, stiffness and their bearing capacity. This problem becomes particularly relevant while reconstructing and new wooden house building, as the correct choice of connection type influences the technical possibility to use wood in the elements of structures. Such types of special connectors as claw washers, gang nails, dowel connections, etc. are used for these purposes. The existing range of claw washers implies different diameters, thicknesses, and claw configurations depending on the required bearing capacity and cross-sectional dimensions of sawn timber. The accepted physical model of wood is a transtropic body. The forces transmitted in the joints of the elements of wooden structures are perceived by the total contact surface of the mating elements. However, the work of individual teeth of claw washers has been poorly studied: research on influence of geometrical characteristics of the tooth on the bearing capacity of the connector is absent; variation in thickness of the connector is not assessed. A double-sided claw washer of the Bulldog type (prototype) with the diameter of 50 mm was adopted as the object of study. Various schemes of cutting of the claw washer with predetermined dimensions (width and height) of a triangular tooth are considered. The influence of dimensions on the bearing capacity of the thickness of claw washers is estimated within 1-1.5 mm. The main criterion for the selected cutting patterns is the ability to produce the washers by single-impact stamping without additional trimming. Double-sided claw washers of 5 different types with the number of cog-teeth from 8 to 12 items on each side were studied. A differential equation of the 4th order is accepted as a mathematical model of cog-tooth action. The equation describes the behavior of a dowel on an elastic base with a fixed value of bending stiffness EI The transition to which was carried out from the variable value EI = f(x) by searching for the equivalent width of the cross-section from the bending conditions of the clement of the triangular section of a variable directed normal to the frontal surface and a constant directed normal to the lateral surface.
- 1 January 2020
- Published by M.V. Lomonosov Northern (Arctic) Federal University in Lesnoy Zhurnal (Forestry Journal)
- No. 4,p. 178-189
CONTACT INTERACTION OF A CLAW WASHER WITH WOOD AT LIMITING SHEAR
When designing, manufacturing and maintaining of woodworks and elements of wooden structures it is necessary to solve the problem of providing the calculation of strength, stiffness and their bearing capacity. This problem becomes particularly relevant while reconstructing and new wooden house building, as the correct choice of connection type influences the technical possibility to use wood in the elements of structures. Such types of special connectors as claw washers, gang nails, dowel connections, etc. are used for these purposes. The existing range of claw washers implies different diameters, thicknesses, and claw configurations depending on the required bearing capacity and cross-sectional dimensions of sawn timber. The accepted physical model of wood is a transtropic body. The forces transmitted in the joints of the elements of wooden structures are perceived by the total contact surface of the mating elements. However, the work of individual teeth of claw washers has been poorly studied: research on influence of geometrical characteristics of the tooth on the bearing capacity of the connector is absent; variation in thickness of the connector is not assessed. A double-sided claw washer of the Bulldog type (prototype) with the diameter of 50 mm was adopted as the object of study. Various schemes of cutting of the claw washer with predetermined dimensions (width and height) of a triangular tooth are considered. The influence of dimensions on the bearing capacity of the thickness of claw washers is estimated within 1-1.5 mm. The main criterion for the selected cutting patterns is the ability to produce the washers by single-impact stamping without additional trimming. Double-sided claw washers of 5 different types with the number of cog-teeth from 8 to 12 items on each side were studied. A differential equation of the 4th order is accepted as a mathematical model of cog-tooth action. The equation describes the behavior of a dowel on an elastic base with a fixed value of bending stiffness EI The transition to which was carried out from the variable value EI = f(x) by searching for the equivalent width of the cross-section from the bending conditions of the clement of the triangular section of a variable directed normal to the frontal surface and a constant directed normal to the lateral surface.