Themistoklis Mastoridis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Themistoklis Mastoridis has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Philippe Baudrenghien
CERN, CH-1211 Geneva, Switzerland
3 shared publications A. Grudiev
CERN, Geneva, Switzerland
1 shared publication- Andrzej Wolski
University of Liverpool
1 shared publication B. Miller
Calif Polytech State Univ San Luis Obispo, San Luis Obispo, CA 93407 USA
1 shared publication- Daniel Valuch
Institute of Electrical Engineering, Faculty of Electrical Engineering and Information Technology , Slovak University of Technology in Bratislava , Ilkovičova 3 , Bratislava , Slovakia
1 shared publication E. Shaposhnikova
CERN, CH-1211 Geneva, Switzerland
1 shared publication
Latest Publications
- Open Access
- 14 October 2025
- Published by Office of Scientific and Technical Information (OSTI)
DOE SC0019287 Final Technical Report
Final Technical Report for DOE SC0019287 award titled Radio Frequency Algorithms. This project supported the design, simulation, analysis, and optimization of robust algorithms to configure, optimize, and control Radio Frequency and Low-Level RF systems for several modern accelerator systems.
- 14 October 2025
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessDOE SC0019287 Final Technical Report
Final Technical Report for DOE SC0019287 award titled Radio Frequency Algorithms. This project supported the design, simulation, analysis, and optimization of robust algorithms to configure, optimize, and control Radio Frequency and Low-Level RF systems for several modern accelerator systems.
- Open Access
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 28 (1)
Electron-ion collider transverse instabilities due to the crab cavity fundamental impedance
The electron-ion collider crab Cavities will present a significant transverse impedance to the beam. The low-level radio frequency system will have to reduce the crab cavity impedance to prevent transverse instabilities, while regulating the crabbing voltage and minimizing the radio frequency noise levels injected into the beam. This work presents an estimate of the crab cavity impedance in the presence of feedback and the resulting stability margins using simplified stability criteria. Generalized stability criteria are also presented in this work and are used to more accurately estimate stability margins. Published by the American Physical Society 2025
- 16 January 2025
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 28 (1)
Open AccessElectron-ion collider transverse instabilities due to the crab cavity fundamental impedance
The electron-ion collider crab Cavities will present a significant transverse impedance to the beam. The low-level radio frequency system will have to reduce the crab cavity impedance to prevent transverse instabilities, while regulating the crabbing voltage and minimizing the radio frequency noise levels injected into the beam. This work presents an estimate of the crab cavity impedance in the presence of feedback and the resulting stability margins using simplified stability criteria. Generalized stability criteria are also presented in this work and are used to more accurately estimate stability margins. Published by the American Physical Society 2025
- Open Access
- 8 July 2024
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 27 (7) , 071001
Impact of beam coupling impedance on crab cavity noise induced emittance growth
Crab cavities will be deployed as a part of the High Luminosity Large Hadron Collider (HL-LHC) upgrade to mitigate the luminosity reduction induced by the crossing angle at the main experiments (ATLAS and CMS). Two prototype crab cavities have been installed in the CERN Super Proton Synchrotron (SPS) in 2018 for studies with proton beams. An issue of concern is the transverse emittance growth induced by noise in the crab cavity radio frequency (rf) system, which is anticipated to limit the performance of the HL-LHC. In measurements conducted in the SPS in 2018, the crab cavity noise-induced emittance growth was measured to be a factor of 4 lower than predicted from the existing analytical models. In this paper, it is shown that the observed discrepancy is explained by damping effects from the beam coupling impedance, which were not included in the models up to now. Using the van Kampen mode approach, a new theory is developed, suggesting that the impedance can separate the coherent tune from the incoherent spectrum leading to an effective reduction of the crab cavity rf noise-induced emittance growth. This mechanism is validated in tracking simulations using the SPS impedance model as well as in dedicated experimental measurements conducted in the SPS in 2022. The implications for the HL-LHC project are discussed. Published by the American Physical Society 2024
- 8 July 2024
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 27 (7) , 071001
Open AccessImpact of beam coupling impedance on crab cavity noise induced emittance growth
Crab cavities will be deployed as a part of the High Luminosity Large Hadron Collider (HL-LHC) upgrade to mitigate the luminosity reduction induced by the crossing angle at the main experiments (ATLAS and CMS). Two prototype crab cavities have been installed in the CERN Super Proton Synchrotron (SPS) in 2018 for studies with proton beams. An issue of concern is the transverse emittance growth induced by noise in the crab cavity radio frequency (rf) system, which is anticipated to limit the performance of the HL-LHC. In measurements conducted in the SPS in 2018, the crab cavity noise-induced emittance growth was measured to be a factor of 4 lower than predicted from the existing analytical models. In this paper, it is shown that the observed discrepancy is explained by damping effects from the beam coupling impedance, which were not included in the models up to now. Using the van Kampen mode approach, a new theory is developed, suggesting that the impedance can separate the coherent tune from the incoherent spectrum leading to an effective reduction of the crab cavity rf noise-induced emittance growth. This mechanism is validated in tracking simulations using the SPS impedance model as well as in dedicated experimental measurements conducted in the SPS in 2022. The implications for the HL-LHC project are discussed. Published by the American Physical Society 2024
- Open Access
- 6 May 2024
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 27 (5) , 051001
Transverse emittance growth due to rf noise in crab cavities: Theory, measurements, cure, and high luminosity LHC estimates
The High-Luminosity LHC (HL-LHC) upgrade with planned operation from 2029 onward has a goal of achieving a tenfold increase in the integrated number of recorded collisions thanks to a doubling of the intensity per bunch ( protons) and a reduction of (the value in the two high luminosity detectors, namely ATLAS and CMS) to 15 cm. Such an increase in recorded collisions would significantly expedite new discoveries and exploration. Crab cavities are an important component of the HL-LHC upgrade and will contribute strongly to achieving an increase in the number of recorded collisions. However, noise injected through the crab cavity radio frequency (rf) system could cause significant transverse emittance growth and limit luminosity lifetime. We presented a theoretical formalism relating transverse emittance growth to rf noise in an earlier work. In this follow-up paper, we summarize measurements in the super-proton synchrotron (SPS) at CERN that validate the theory, we present estimates of the emittance growth rates using state-of-the-art rf and low-level rf (LLRF) technologies, and we set the rf noise specifications to achieve acceptable performance. A novel dedicated feedback system acting through the crab cavities to mitigate emittance growth will be required. In this work, we develop a theoretical formalism to evaluate the performance of such a feedback system in any collider, identify limiting components, present simulation results to validate these studies, and derive key design parameters for an HL-LHC implementation of such a feedback system.- 6 May 2024
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 27 (5) , 051001
Open AccessTransverse emittance growth due to rf noise in crab cavities: Theory, measurements, cure, and high luminosity LHC estimates
The High-Luminosity LHC (HL-LHC) upgrade with planned operation from 2029 onward has a goal of achieving a tenfold increase in the integrated number of recorded collisions thanks to a doubling of the intensity per bunch ( protons) and a reduction of (the value in the two high luminosity detectors, namely ATLAS and CMS) to 15 cm. Such an increase in recorded collisions would significantly expedite new discoveries and exploration. Crab cavities are an important component of the HL-LHC upgrade and will contribute strongly to achieving an increase in the number of recorded collisions. However, noise injected through the crab cavity radio frequency (rf) system could cause significant transverse emittance growth and limit luminosity lifetime. We presented a theoretical formalism relating transverse emittance growth to rf noise in an earlier work. In this follow-up paper, we summarize measurements in the super-proton synchrotron (SPS) at CERN that validate the theory, we present estimates of the emittance growth rates using state-of-the-art rf and low-level rf (LLRF) technologies, and we set the rf noise specifications to achieve acceptable performance. A novel dedicated feedback system acting through the crab cavities to mitigate emittance growth will be required. In this work, we develop a theoretical formalism to evaluate the performance of such a feedback system in any collider, identify limiting components, present simulation results to validate these studies, and derive key design parameters for an HL-LHC implementation of such a feedback system. - Open Access
- 17 February 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (2) , 021002
CERN’s Super Proton Synchrotron 200 MHz cavity regulation upgrade: Modeling, design optimization, and performance estimation
CERN’s Super Proton Synchrotron (SPS) accelerates protons to and transfers them into the Large Hadron Collider (LHC). It is currently one of the limiting factors in increasing the beam intensity and thus the luminosity of the LHC. As part of the LHC injectors upgrade project, the SPS 200 MHz rf system has been modified during the CERN long shutdown 2 (January 2019–April 2021), resulting in a new layout containing two additional cavities. The goal is to improve longitudinal stability required for the planned doubling of the beam intensity for the high luminosity LHC. In parallel with the upgrade of the high-power rf, a new low-level rf (LLRF) system has been designed, including a new cavity field regulation system. This work presents a model of the beam-rf interaction which includes a detailed representation of the LLRF controlling the cavity. This model is used to determine the optimal LLRF design for maximum loop stability and beam loading compensation. Finally, the performance of the upgraded LLRF is estimated.- 17 February 2022
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 25 (2) , 021002
Open AccessCERN’s Super Proton Synchrotron 200 MHz cavity regulation upgrade: Modeling, design optimization, and performance estimation
CERN’s Super Proton Synchrotron (SPS) accelerates protons to and transfers them into the Large Hadron Collider (LHC). It is currently one of the limiting factors in increasing the beam intensity and thus the luminosity of the LHC. As part of the LHC injectors upgrade project, the SPS 200 MHz rf system has been modified during the CERN long shutdown 2 (January 2019–April 2021), resulting in a new layout containing two additional cavities. The goal is to improve longitudinal stability required for the planned doubling of the beam intensity for the high luminosity LHC. In parallel with the upgrade of the high-power rf, a new low-level rf (LLRF) system has been designed, including a new cavity field regulation system. This work presents a model of the beam-rf interaction which includes a detailed representation of the LLRF controlling the cavity. This model is used to determine the optimal LLRF design for maximum loop stability and beam loading compensation. Finally, the performance of the upgraded LLRF is estimated. - Open Access
- 12 October 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (10) , 101601
Beam gap transient analysis and mitigations in high-current storage rings for an electron-ion collider
The U.S. electron ion collider will utilize high current electron and ion storage rings with many bunches and large rf systems. Because of the dissimilarity of the two rings, the rf transients created by gaps or variations in the current distributions will be very different in the two rings. These transients cause a shift in the synchronous phase of the beams as a function of rf bucket position, can impact the luminosity through shifts in longitudinal position of the IP, will affect the performance of the rf and LLRF control loops, and may require significant rf power overhead to control. A machine design that uses superconducting crab cavities will also have sensitivity to gap transients and synchronous phase variations along the bunch train with variations in crab cavity voltage seen by each bunch, since the high of the crab cavities precludes modulating them to compensate for the time of arrival shifts caused by the gap transients in the main rf systems. All these effects make the problem of managing gap transients crucial to the operation of the EIC. This work presents methods to study the dynamics of the rf and LLRF systems for these heavily beam loaded facilities. An illustrative machine design example is presented and used to investigate the expected magnitudes of the rf gap transients, and exploration of various possible remedies to match the gap transients in the two dissimilar EIC rings. In addition to the study of the power required and gap transients, this work also estimates longitudinal coupled-bunch instabilities due to the baseline cavity fundamental impedance. The work is motivated to emphasize the importance of tools and methods to estimate these effects as part of the early design phase of the Electron-Ion Collider or any high current storage ring design.- 12 October 2020
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 23 (10) , 101601
Open AccessBeam gap transient analysis and mitigations in high-current storage rings for an electron-ion collider
The U.S. electron ion collider will utilize high current electron and ion storage rings with many bunches and large rf systems. Because of the dissimilarity of the two rings, the rf transients created by gaps or variations in the current distributions will be very different in the two rings. These transients cause a shift in the synchronous phase of the beams as a function of rf bucket position, can impact the luminosity through shifts in longitudinal position of the IP, will affect the performance of the rf and LLRF control loops, and may require significant rf power overhead to control. A machine design that uses superconducting crab cavities will also have sensitivity to gap transients and synchronous phase variations along the bunch train with variations in crab cavity voltage seen by each bunch, since the high of the crab cavities precludes modulating them to compensate for the time of arrival shifts caused by the gap transients in the main rf systems. All these effects make the problem of managing gap transients crucial to the operation of the EIC. This work presents methods to study the dynamics of the rf and LLRF systems for these heavily beam loaded facilities. An illustrative machine design example is presented and used to investigate the expected magnitudes of the rf gap transients, and exploration of various possible remedies to match the gap transients in the two dissimilar EIC rings. In addition to the study of the power required and gap transients, this work also estimates longitudinal coupled-bunch instabilities due to the baseline cavity fundamental impedance. The work is motivated to emphasize the importance of tools and methods to estimate these effects as part of the early design phase of the Electron-Ion Collider or any high current storage ring design. - Open Access
- 12 November 2015
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 18 (11)
High-accuracy diagnostic tool for electron cloud observation in the LHC based on synchronous phase measurements
Electron cloud effects, which include heat load in the cryogenic system, pressure rise, and beam instabilities, are among the main intensity limitations for the LHC operation with 25 ns spaced bunches. A new observation tool was proposed and developed to monitor the e-cloud activity and it has already been used successfully during the LHC run 1 (2010–2012) and it is being intensively used in operation during the start of the LHC run 2 (2015–2018). It is based on the fact that the power loss of each bunch due to e-cloud can be estimated using bunch-by-bunch measurement of the synchronous phase. The measurements were done using the existing beam phase module of the low-level rf control system. In order to achieve the very high accuracy required, corrections for reflection in the cables and for systematic errors need to be applied followed by a post-processing of the measurements. Results clearly show the e-cloud buildup along the bunch trains and its time evolution during each LHC fill as well as from fill to fill. Measurements during the 2012 LHC scrubbing run reveal a progressive reduction in the e-cloud activity and therefore a decrease in the secondary electron yield. The total beam power loss can be computed as a sum of the contributions from all bunches and compared with the heat load deposited in the cryogenic system.
- 12 November 2015
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 18 (11)
Open AccessHigh-accuracy diagnostic tool for electron cloud observation in the LHC based on synchronous phase measurements
Electron cloud effects, which include heat load in the cryogenic system, pressure rise, and beam instabilities, are among the main intensity limitations for the LHC operation with 25 ns spaced bunches. A new observation tool was proposed and developed to monitor the e-cloud activity and it has already been used successfully during the LHC run 1 (2010–2012) and it is being intensively used in operation during the start of the LHC run 2 (2015–2018). It is based on the fact that the power loss of each bunch due to e-cloud can be estimated using bunch-by-bunch measurement of the synchronous phase. The measurements were done using the existing beam phase module of the low-level rf control system. In order to achieve the very high accuracy required, corrections for reflection in the cables and for systematic errors need to be applied followed by a post-processing of the measurements. Results clearly show the e-cloud buildup along the bunch trains and its time evolution during each LHC fill as well as from fill to fill. Measurements during the 2012 LHC scrubbing run reveal a progressive reduction in the e-cloud activity and therefore a decrease in the secondary electron yield. The total beam power loss can be computed as a sum of the contributions from all bunches and compared with the heat load deposited in the cryogenic system.