Vera Hajkova

Ultrafast, high-power lasers operating in the near-infrared (NIR) region are key to accelerating ions to extremely high energies. By changing the laser wavelength from the NIR region to the hard X-ray range, the photon energy increases more than 10 000 times. The interaction mechanisms and, consequently, radiation attenuation lengths differ significantly between these two spectral ranges. Here we report the use of an X-ray free-electron laser (European XFEL, Germany) delivering 9.3 keV photons in 25 fs pulses and a total energy of 0.35 mJ on a solid target. Electrons and ions escaping from an irradiated 3 μm Cu foil into vacuum were investigated by a time-of-flight technique using windowless electron multipliers that enable the measurement of very weak currents. A model based on a shifted Maxwell–Boltzmann velocity distribution of species was used to analyze the detector signals. The method used made it possible to determine the temperatures of hot electrons and protons, their center-of-mass energy, the charge states of the isotopes 63Cu and 65Cu, and the magnitude of the voltage arising in the double layer that accelerated them, and to estimate the repetition frequency of their cascade emission from the plasma. Computer simulations revealed the evolution of the electron density and temperature, the ion charge state distribution, and the time scales of processes occurring in the bulk of irradiated matter. Good correlation of theoretical and experimental results over the range of high-energy-density states demonstrates the capability to provide critical data to develop plasma models in the warm dense matter regime.

One of the most interesting and serious chemical problems associated with the operation of high-power extreme ultraviolet/x-ray radiation sources is the contamination of the optical elements that guide, direct or focus its beams. It is visually manifested by the formation of a brownish-black deposit on the surface of the elements, which leads to a decrease in their reflectivity or transmittance, depending on whether the radiation is reflected from them or passes through them. Chemical analyses have revealed elemental carbon as the main constituent of the deposit. It is formed by radiolysis of the carbon containing molecules (e.g., hydrocarbons and carbon oxides) among residual gases. The mechanisms of these processes represent the subject of extensive research. The decomposition can occur in the gas phase (vacuum) or in a layer condensed on an optical surface. Whether the initiation of these processes is dominated by photons or by secondary electrons is also being investigated. The results obtained are then intended to be used to develop and implement techniques to remedy the reduction (or even complete loss) of functionality of optical elements caused by the contamination.

We report on experiments where solid-density Mg plasmas are created by heating with the focused output of the Linac Coherent Light Source x-ray free-electron laser. We study the K-shell emission from the helium- and lithium-like ions using Bragg crystal spectroscopy. Observation of the dielectronic satellites in lithium-like ions confirms that the M-shell electrons appear bound for these high charge states. An analysis of the intensity of these satellites indicates that when modeled with an atomic-kinetics code, the ionization potential depression model employed needs to produce depressions for these ions which lie between those predicted by the well known Stewart-Pyatt and Ecker-Kroll models. These results are largely consistent with recent density functional theory calculations.

We report on an experiment performed at the FLASH2 free-electron laser (FEL) aimed at producing warm dense matter via soft x-ray isochoric heating. In the experiment, we focus on study of the ions emitted during the soft x-ray ablation process using time-of-flight electron multipliers and a shifted Maxwell–Boltzmann velocity distribution model. We find that most emitted ions are thermal, but that some impurities chemisorbed on the target surface, such as protons, are accelerated by the electrostatic field created in the plasma by escaped electrons. The morphology of the complex crater structure indicates the presence of several ion groups with varying temperatures. We find that the ion sound velocity is controlled by the ion temperature and show how the ion yield depends on the FEL radiation attenuation length in different materials.

We report on ion emission from plasma produced on thick targets irradiated with nanosecond and femtosecond pulses delivered by mid-ultraviolet and soft x-ray lasers, respectively. To distinguish between different ion acceleration mechanisms, the maximum kinetic energy of ions produced under different interaction conditions is plotted versus laser fluence. The transformation of the time-of-flight detector signal into ion charge density distance-of-flight spectra makes it possible to determine the mean kinetic energy of the fastest ion groups based on the influence of the acoustic velocity of ion expansion. This allows obtaining additional characteristics of the ion production. The final energy of the group of fast ions determined using the ion sound velocity model is an order of magnitude larger in the fs-XFEL interaction than in the ns-UV one. On the contrary, the ablation yield of ions in our experiment is seven orders of magnitude greater when applying ns-UV laser pulses, not only due to higher energies of UV laser pulses, but also due to a significant difference in interaction and ion formation mechanisms.

We present an extended theoretical background of so-called fluence scan (f-scan or F-scan) method, which is frequently being used for offline characterization of focused short-wavelength (EUV, soft X-ray, and hard X-ray) laser beams [J. Chalupský et al., Opt. Express 18, 27836 (2010)]. The method exploits ablative imprints in various solids to visualize iso-fluence beam contours at different fluence and/or clip levels. An f-scan curve (clip level as a function of the corresponding iso-fluence contour area) can be generated for a general non-Gaussian beam. As shown in this paper, fluence scan encompasses important information about energy distribution within the beam profile, which may play an essential role in laser-matter interaction research employing intense non-ideal beams. Here we for the first time discuss fundamental properties of the f-scan function and its inverse counterpart (if-scan). Furthermore, we extensively elucidate how it is related to the effective beam area, energy distribution, and to the so called Liu’s dependence [J. M. Liu, Opt. Lett. 7, 196 (1982)]. A new method of the effective area evaluation based on weighted inverse f-scan fit is introduced and applied to real data obtained at the SCSS (SPring-8 Compact SASE Source) facility.

We studied experimentally and theoretically the structural transition of diamond under an irradiation with an intense femtosecond extreme ultraviolet laser (XUV) pulse of 24–275 eV photon energy provided by free-electron lasers. Experimental results obtained show that the irradiated diamond undergoes a solid-to-solid phase transition to graphite, and not to an amorphous state. Our theoretical findings suggest that the nature of this transition is nonthermal, stimulated by a change of the interatomic potential triggered by the excitation of valence electrons. Ultrashort laser pulse duration enables to identify the subsequent steps of this process: electron excitation, band gap collapse, and the following atomic motion. A good agreement between the experimentally measured and theoretically calculated damage thresholds for the XUV range supports our conclusions.