Lei Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lei Qin has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
Xiaoyan Mao
College of Chemical Engineering, State Key Laboratory of Green Chemical Synthesis and Conversion, Zhejiang University of Technology, Hangzhou 310014, China
5 shared publicationsMengyuan Zhang
Center for Membrane Separation and Water Science & Technology, State Key Lab Base of Green Chemical Synthesis Technology Zhejiang University of Technology Hangzhou 310014 China
4 shared publicationsCongjie Gao
College of Chemical Engineering, State Key Laboratory of Advanced Separation Membrane Materials, Zhejiang University of Technology, Hangzhou, Zhejiang Province, 310014, China
3 shared publications- Guoliang Zhang
Center for Membrane and Water Science &Technology, Institute of Oceanic and Environmental Chemical Engineering, Collaborative Innovation Center of Membrane Separation and Water Treatment of Zhejiang Province, Zhejiang University of Technology, Chaowang Road 18#, Hangzhou 310014, China
3 shared publications Yihui Yang
College of Chemical Engineering, State Key Laboratory of Green Chemical Synthesis and Conversion, Zhejiang University of Technology, Hangzhou 310014, China
3 shared publications- Yingyu Tan
Eco-Environmental Science Research & Design Institute of Zhejiang Province, Hangzhou 310000, China
3 shared publications
Latest Publications
- 11 September 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 370, 124397
Smart methylcellulose-based foams with thermal-induced volume shrinkage for efficient oil absorption and controllable recovery
- 11 September 2025
- Published by Elsevier in Carbohydrate Polymers
- Vol. 370, 124397
Smart methylcellulose-based foams with thermal-induced volume shrinkage for efficient oil absorption and controllable recovery
- 7 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (35) , 28974-28986
CVD-induced corrosion reconstruction of defective metal–organic frameworks boosted advanced catalytic oxidation
Metal–organic frameworks (MOFs) are promising candidates for many applications, particularly catalysis. However, the development of highly active MOFs with controlled defective structures and components still remains a significant challenge. Herein, we report a new and versatile CVD-induced corrosion strategy for the reconstruction of defective Fe-MOFs through persulfate gasification. Strong confined interactions between guests and Fe nodes realized the reconstruction of the crystal structure and allowed the introduction of a heteroatom. With this novel approach, a uniform dispersion of defects and a perfect metallic/heteroatom interface were obtained. This simultaneous structural engineering method that could utilize SO2 emissions successfully led MIL-53(Fe) to exhibit superior activity for photocatalytic oxidation (TOFs as high as 2.287 h−1). DFT calculations coupled with experimental evidence revealed that the performance was triggered by the synergistic catalysis of abundant sulfur and oxygen vacancies on the defective (100) crystal face. This unique “waste-to-treasure” approach significantly boosts catalytic efficiency while harnessing valuable resource from waste gas, offering a practical pathway for advanced oxidation.
- 7 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (35) , 28974-28986
CVD-induced corrosion reconstruction of defective metal–organic frameworks boosted advanced catalytic oxidation
Metal–organic frameworks (MOFs) are promising candidates for many applications, particularly catalysis. However, the development of highly active MOFs with controlled defective structures and components still remains a significant challenge. Herein, we report a new and versatile CVD-induced corrosion strategy for the reconstruction of defective Fe-MOFs through persulfate gasification. Strong confined interactions between guests and Fe nodes realized the reconstruction of the crystal structure and allowed the introduction of a heteroatom. With this novel approach, a uniform dispersion of defects and a perfect metallic/heteroatom interface were obtained. This simultaneous structural engineering method that could utilize SO2 emissions successfully led MIL-53(Fe) to exhibit superior activity for photocatalytic oxidation (TOFs as high as 2.287 h−1). DFT calculations coupled with experimental evidence revealed that the performance was triggered by the synergistic catalysis of abundant sulfur and oxygen vacancies on the defective (100) crystal face. This unique “waste-to-treasure” approach significantly boosts catalytic efficiency while harnessing valuable resource from waste gas, offering a practical pathway for advanced oxidation.
- Open Access
Advanced Treatment of High-Concentration Ammonia–Nitrogen Wastewater by Pantothenic Acid-Enhanced Photosynthetic Bacteria
To address the slow growth rate of photosynthetic bacteria (PSB), this study introduces pantothenic acid as a biological enhancing factor. The effects of pantothenic acid on PSB proliferation and its effectiveness in treating high-concentration ammonia–nitrogen wastewater were systematically evaluated. Additionally, the effects of different culture conditions, including dark aeration, darkness, light exposure, and light aeration, on PSB growth were investigated. The results show that optimal PSB growth was achieved with 20 mg/L of pantothenic acid; however, higher concentrations of pantothenic acid inhibited bacterial growth. The addition of pantothenic acid also significantly enhanced the performance of PSB in treating high-concentration organic wastewater, increasing the removal rates of COD, ammonia nitrogen, total phosphorus, and total nitrogen to 43.0%, 94.0%, 49.7%, and 51.0%, respectively. Furthermore, a synergistic effect between dark aeration and light exposure was observed. When the time of light and dark aeration was set at 1:1, the highest PSB yield was recorded, and the removal efficiencies of COD, ammonia nitrogen, total nitrogen, and total phosphorus increased to 71.4%, 95.3%, 57.1%, and 74.7%, respectively. Through the introduction of pantothenic acid and optimization of culture mode, the rapid growth of PSB and highly efficient treatment of organic wastewater were achieved, providing a new approach for advanced wastewater treatment and resource utilization.
Open AccessAdvanced Treatment of High-Concentration Ammonia–Nitrogen Wastewater by Pantothenic Acid-Enhanced Photosynthetic Bacteria
To address the slow growth rate of photosynthetic bacteria (PSB), this study introduces pantothenic acid as a biological enhancing factor. The effects of pantothenic acid on PSB proliferation and its effectiveness in treating high-concentration ammonia–nitrogen wastewater were systematically evaluated. Additionally, the effects of different culture conditions, including dark aeration, darkness, light exposure, and light aeration, on PSB growth were investigated. The results show that optimal PSB growth was achieved with 20 mg/L of pantothenic acid; however, higher concentrations of pantothenic acid inhibited bacterial growth. The addition of pantothenic acid also significantly enhanced the performance of PSB in treating high-concentration organic wastewater, increasing the removal rates of COD, ammonia nitrogen, total phosphorus, and total nitrogen to 43.0%, 94.0%, 49.7%, and 51.0%, respectively. Furthermore, a synergistic effect between dark aeration and light exposure was observed. When the time of light and dark aeration was set at 1:1, the highest PSB yield was recorded, and the removal efficiencies of COD, ammonia nitrogen, total nitrogen, and total phosphorus increased to 71.4%, 95.3%, 57.1%, and 74.7%, respectively. Through the introduction of pantothenic acid and optimization of culture mode, the rapid growth of PSB and highly efficient treatment of organic wastewater were achieved, providing a new approach for advanced wastewater treatment and resource utilization.
- 28 May 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (45)
H 2 O‐Induced Transformation of Superstructured MOFs into Self‐Standing, Superprotonic Conducting Membranes for Hydrogen Fuel Cells
Metal–organic frameworks (MOFs) represent an emerging class of crystalline materials characterized by high porosity, vast surface area, and structural variability. Despite the potential for sustainable energy applications, challenges remain in designing and engineering MOF powders with limited mechanical robustness and integrity into self‐standing, durable membranes while retaining their functionality. Inspired by unique structure of natural vascular bundles, an approach is developed to fabricating MOF membranes via dimensional reduction of superstructures. Interestingly, structural water‐flexibility of MOF superstructure led to homogeneous gelation, which can encapsulate a substantial amount of water molecules within porous structures, forming micro/nano‐scale channels for efficient proton transport. Hierarchical channel ensures super‐protonic conductivity values ranging from 0.07 S cm −1 (40% RH) at 293 K to 0.14 S cm −1 (90% RH) at 353 K. For the first time, it demonstrates relevant hydrogen fuel cell performance, achieving a peak power density of 48 mW cm −2 . This study paves the way for engineering all‐MOF‐based materials as proton‐conducting membranes for low‐temperature hydrogen fuel cells.
- 28 May 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (45)
H 2 O‐Induced Transformation of Superstructured MOFs into Self‐Standing, Superprotonic Conducting Membranes for Hydrogen Fuel Cells
Metal–organic frameworks (MOFs) represent an emerging class of crystalline materials characterized by high porosity, vast surface area, and structural variability. Despite the potential for sustainable energy applications, challenges remain in designing and engineering MOF powders with limited mechanical robustness and integrity into self‐standing, durable membranes while retaining their functionality. Inspired by unique structure of natural vascular bundles, an approach is developed to fabricating MOF membranes via dimensional reduction of superstructures. Interestingly, structural water‐flexibility of MOF superstructure led to homogeneous gelation, which can encapsulate a substantial amount of water molecules within porous structures, forming micro/nano‐scale channels for efficient proton transport. Hierarchical channel ensures super‐protonic conductivity values ranging from 0.07 S cm −1 (40% RH) at 293 K to 0.14 S cm −1 (90% RH) at 353 K. For the first time, it demonstrates relevant hydrogen fuel cell performance, achieving a peak power density of 48 mW cm −2 . This study paves the way for engineering all‐MOF‐based materials as proton‐conducting membranes for low‐temperature hydrogen fuel cells.
- Open Access
Utilizing a Novel Halotolerant Bordetella Bacterium Combined with Co-Metabolites to Boost the Degradation of P-Nitrophenol in High-Salinity Wastewater
A novel strain capable of fully utilizing p-nitrophenol (PNP) as the sole carbon source under high-salinity conditions was isolated from the sediments of wastewater discharged from an aquaculture company. The identification of the strain as Bordetella sp. was confirmed by analyzing its morphological, physiological, and biochemical traits in conjunction with its 16S rDNA sequence. Furthermore, pantothenic acid, serving as a carbon source for co-metabolites, could significantly enhance the biodegradation process of the tricarboxylic acid (TCA) cycle. Under the optimal growth conditions at a temperature of 30 °C, pH of 8.0, aeration of 0.32 m3·(m3·min)−1 and salinity of 3% (NaCl, w/v), the degradation rate of 350 mg·L−1 PNP increased from 60.8% to 85.9% within 72 h after adding 30 mg·L−1 of pantothenic acid to a 12-liter bioreactor. The intermediate products from the degradation process, analyzed via GC/MS, were determined to be hydroquinone, which suggests that the degradation pathway of the bacterium for PNP involves the breakdown of hydroquinone. Benefits have been derived from the microorganism’s tolerance to high salinity and high PNP concentrations, coupled with its superior PNP degradation performance, offering new insights and a research basis for the efficient biological treatment of high-salinity PNP wastewater.
Open AccessUtilizing a Novel Halotolerant Bordetella Bacterium Combined with Co-Metabolites to Boost the Degradation of P-Nitrophenol in High-Salinity Wastewater
A novel strain capable of fully utilizing p-nitrophenol (PNP) as the sole carbon source under high-salinity conditions was isolated from the sediments of wastewater discharged from an aquaculture company. The identification of the strain as Bordetella sp. was confirmed by analyzing its morphological, physiological, and biochemical traits in conjunction with its 16S rDNA sequence. Furthermore, pantothenic acid, serving as a carbon source for co-metabolites, could significantly enhance the biodegradation process of the tricarboxylic acid (TCA) cycle. Under the optimal growth conditions at a temperature of 30 °C, pH of 8.0, aeration of 0.32 m3·(m3·min)−1 and salinity of 3% (NaCl, w/v), the degradation rate of 350 mg·L−1 PNP increased from 60.8% to 85.9% within 72 h after adding 30 mg·L−1 of pantothenic acid to a 12-liter bioreactor. The intermediate products from the degradation process, analyzed via GC/MS, were determined to be hydroquinone, which suggests that the degradation pathway of the bacterium for PNP involves the breakdown of hydroquinone. Benefits have been derived from the microorganism’s tolerance to high salinity and high PNP concentrations, coupled with its superior PNP degradation performance, offering new insights and a research basis for the efficient biological treatment of high-salinity PNP wastewater.
Oriented Self‐assembly of Flexible MOFs Nanocrystals into Anisotropic Superstructures with Homogeneous Hydrogels Behaviors
Building of metal–organic frameworks (MOFs) homogeneous hydrogels made by spontaneous crystallization remains a significant challenge. Inspired by anisotropically structured materials in nature, an oriented super‐assembly strategy to construct micro‐scale MOFs superstructure is reported, in which the strong intermolecular interactions between zirconium‐oxygen (Zr─O) cluster and glutamic acid are utilized to drive the self‐assembly of flexible nanoribbons into pumpkin‐like microspheres. The confined effect between water‐flexible building blocks and crosslinked hydrogen networks of superstructures achieved a mismatch transformation of MOFs powders into homogeneous hydrogels. Importantly, the elastic and rigid properties of hydrogels can be simply controlled by precise modulation of coordination and self‐assembly for anisotropic superstructure. Experimental results and theoretical calculations demonstrates that MOFs anisotropic superstructure exhibits dynamic double networks with a superior water harvesting capacity (119.73 g g−1) accompanied with heavy metal removal (1331.67 mg g−1) and strong mechanical strength (Young's modulus of 0.3 GPa). The study highlights the unique possibility of tailoring MOFs superstructure with homogeneous hydrogel behavior for application in diverse fields.
Oriented Self‐assembly of Flexible MOFs Nanocrystals into Anisotropic Superstructures with Homogeneous Hydrogels Behaviors
Building of metal–organic frameworks (MOFs) homogeneous hydrogels made by spontaneous crystallization remains a significant challenge. Inspired by anisotropically structured materials in nature, an oriented super‐assembly strategy to construct micro‐scale MOFs superstructure is reported, in which the strong intermolecular interactions between zirconium‐oxygen (Zr─O) cluster and glutamic acid are utilized to drive the self‐assembly of flexible nanoribbons into pumpkin‐like microspheres. The confined effect between water‐flexible building blocks and crosslinked hydrogen networks of superstructures achieved a mismatch transformation of MOFs powders into homogeneous hydrogels. Importantly, the elastic and rigid properties of hydrogels can be simply controlled by precise modulation of coordination and self‐assembly for anisotropic superstructure. Experimental results and theoretical calculations demonstrates that MOFs anisotropic superstructure exhibits dynamic double networks with a superior water harvesting capacity (119.73 g g−1) accompanied with heavy metal removal (1331.67 mg g−1) and strong mechanical strength (Young's modulus of 0.3 GPa). The study highlights the unique possibility of tailoring MOFs superstructure with homogeneous hydrogel behavior for application in diverse fields.
- Open Access
Porous Biochar Materials for Sustainable Water Treatment: Synthesis, Modification, and Application
In the current world, the increasingly developed industries of mankind have caused huge pollution to the earth on which we live. And the water resources, which are the source of human life, are also being seriously polluted and destroyed. Water pollution has become an urgent need to deal with in today’s world. In order to achieve sustainable development, people are constantly using new materials in the process of water treatment. Biochar material is one of them. In the thermochemical process, biomass produces a common by-product coke, which is also called biochar as a result of biomass decomposition. Due to the low price and large specific surface area which can reach over 1000 m2·g−1, it has many applications and advantages in catalysis, adsorption, fuel cell, soil improvement, etc., and has a wide range of application prospects. Therefore, effectively prepared and used biochar in water treatment has become a method to improve the efficiency and economic benefits of thermochemical processes. In this overview, we first introduced the preparation methods of different new types of biomass materials, we then classified and discussed the various modification strategies, and finally discussed the application potential of biochar material for wastewater treatment.
Open AccessPorous Biochar Materials for Sustainable Water Treatment: Synthesis, Modification, and Application
In the current world, the increasingly developed industries of mankind have caused huge pollution to the earth on which we live. And the water resources, which are the source of human life, are also being seriously polluted and destroyed. Water pollution has become an urgent need to deal with in today’s world. In order to achieve sustainable development, people are constantly using new materials in the process of water treatment. Biochar material is one of them. In the thermochemical process, biomass produces a common by-product coke, which is also called biochar as a result of biomass decomposition. Due to the low price and large specific surface area which can reach over 1000 m2·g−1, it has many applications and advantages in catalysis, adsorption, fuel cell, soil improvement, etc., and has a wide range of application prospects. Therefore, effectively prepared and used biochar in water treatment has become a method to improve the efficiency and economic benefits of thermochemical processes. In this overview, we first introduced the preparation methods of different new types of biomass materials, we then classified and discussed the various modification strategies, and finally discussed the application potential of biochar material for wastewater treatment.
- 7 November 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (3)
Transformation of Organonitrogen‐Encapsulated MOFs into N‐Doped Fe3O4@C Nanopolyhedron via CVD Super‐Assembly for Photochemical Oxidation
Development of nano‐structured metal oxides/heteroatom composites with controlled components and structure for photochemical oxidation still remains a great challenge. Here, a new and versatile strategy is reported for transformation of organonitrogen‐encapsulated metal‐organic frameworks (MOFs) into N‐doped Fe3O4@C nanopolyhedron by chemical vapor deposition‐induced super‐assembly method. Strong confined interaction between organonitrogen guests (urea, thiourea, melamine, and dimethylimidazole) and Fe nodes of MOFs realizes reconstruction of crystal structure and introduction of N species. With the novel approach, the uniform dispersion of guests and perfect metallic/heteroatom interfacial is obtained. Compared with MOFs‐derived Fe2O3/C, the heteroatom/defect‐to‐metal cluster charge transfer excitations lead N‐doped Fe3O4@C to exhibit more superior activity for photocatalytic oxidation (turn‐over frequencies as high as 3.72 h−1). It demonstrates that the introduction of abundant pyrrole‐N and oxygen vacancies on carbon interface boosts the advance of photo‐generated carrier transfer. The study offers a simple and promising strategy for the design of novel metal oxides/heteroatom composite with adjustable structure and functions.
- 7 November 2022
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (3)
Transformation of Organonitrogen‐Encapsulated MOFs into N‐Doped Fe3O4@C Nanopolyhedron via CVD Super‐Assembly for Photochemical Oxidation
Development of nano‐structured metal oxides/heteroatom composites with controlled components and structure for photochemical oxidation still remains a great challenge. Here, a new and versatile strategy is reported for transformation of organonitrogen‐encapsulated metal‐organic frameworks (MOFs) into N‐doped Fe3O4@C nanopolyhedron by chemical vapor deposition‐induced super‐assembly method. Strong confined interaction between organonitrogen guests (urea, thiourea, melamine, and dimethylimidazole) and Fe nodes of MOFs realizes reconstruction of crystal structure and introduction of N species. With the novel approach, the uniform dispersion of guests and perfect metallic/heteroatom interfacial is obtained. Compared with MOFs‐derived Fe2O3/C, the heteroatom/defect‐to‐metal cluster charge transfer excitations lead N‐doped Fe3O4@C to exhibit more superior activity for photocatalytic oxidation (turn‐over frequencies as high as 3.72 h−1). It demonstrates that the introduction of abundant pyrrole‐N and oxygen vacancies on carbon interface boosts the advance of photo‐generated carrier transfer. The study offers a simple and promising strategy for the design of novel metal oxides/heteroatom composite with adjustable structure and functions.