Wei Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei Yang has a total of 102 co-authors. Here are the top co-authors by number of shared publications:
Lianqing Zheng
Institute of Molecular Biophysics, Florida State University, 91 Chieftan Way 101 KLB, Tallahassee, Florida 32306, United States
13 shared publicationsDonghong Min
Institute of Molecular Biophysics, Florida State University, Tallahassee, FL 32306 USA
8 shared publicationsHongzhi Li
School of Computational Science, Florida State University, Tallahassee, Florida, United States of America
6 shared publicationsMengen Chen
Institute of Molecular Biophysics, Florida State University, Tallahassee, FL 32306, USA
5 shared publications- Lianqing Zheng
Institute of Molecular Biophysics, Florida State University , Tallahassee, FL 32306
4 shared publications Chao Lv
Department of Chemistry and Biochemistry, Florida State University, Tallahassee, Florida, 32306
3 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 54 (18)
Molecular structure and DNA binding mode of unsymmetric cyanine dyes RiboGreen and OliGreen
The binding of fluorescent dyes to nucleic acids and their fluorogenic properties are indispensable tools for nucleic acid detection, quantification, and imaging, yet the molecular structures of several widely used commercial dyes have remained unknown. Here, we de novo determined the molecular structures of RiboGreen and OliGreen and confirmed the previously proposed structure of PicoGreen using high-field NMR spectroscopy and ultra-high resolution mass spectrometry. All three dyes were identified as unsymmetric cyanine dyes, where benzazolium and 4-quinolinium moieties are linked by a monomethine bridge. Complete 1H and 13C resonance assignments enabled us to expand the existing chemical shift reference set for this important class of dyes. Photophysical characterization with standardized single- and double-stranded DNA and RNA targets indicated that all dyes performed similarly upon binding despite being marketed toward different nucleic acid types. NMR spectroscopy and long-timescale molecular dynamics simulations showed that RiboGreen interacts with double-stranded DNA predominantly by two binding modes, electrostatic interactions with the phosphodiester backbone and π–π stacking with accessible nucleobases of the DNA molecule. These results establish the molecular structures of three widely used commercial dyes and provide a structural and mechanistic framework for understanding the fluorogenic properties of this class of dyes.
- 22 September 2026
- Published by Oxford University Press (OUP) in Nucleic Acids Research
- Vol. 54 (18)
Open AccessMolecular structure and DNA binding mode of unsymmetric cyanine dyes RiboGreen and OliGreen
The binding of fluorescent dyes to nucleic acids and their fluorogenic properties are indispensable tools for nucleic acid detection, quantification, and imaging, yet the molecular structures of several widely used commercial dyes have remained unknown. Here, we de novo determined the molecular structures of RiboGreen and OliGreen and confirmed the previously proposed structure of PicoGreen using high-field NMR spectroscopy and ultra-high resolution mass spectrometry. All three dyes were identified as unsymmetric cyanine dyes, where benzazolium and 4-quinolinium moieties are linked by a monomethine bridge. Complete 1H and 13C resonance assignments enabled us to expand the existing chemical shift reference set for this important class of dyes. Photophysical characterization with standardized single- and double-stranded DNA and RNA targets indicated that all dyes performed similarly upon binding despite being marketed toward different nucleic acid types. NMR spectroscopy and long-timescale molecular dynamics simulations showed that RiboGreen interacts with double-stranded DNA predominantly by two binding modes, electrostatic interactions with the phosphodiester backbone and π–π stacking with accessible nucleobases of the DNA molecule. These results establish the molecular structures of three widely used commercial dyes and provide a structural and mechanistic framework for understanding the fluorogenic properties of this class of dyes.
- Open Access
Molecular Structure and DNA Binding Mode of Unsymmetric Cyanine Dyes RiboGreen and OliGreen
The binding of fluorescent dyes to nucleic acids and their fluorogenic properties are indispensable tools for nucleic acid detection, quantification, and imaging, yet the molecular structures of several widely used commercial dyes have remained unknown. Here, we de novo determined the molecular structures of RiboGreen and OliGreen and confirmed the previously proposed structure of PicoGreen using high-field NMR spectroscopy. All three dyes were identified as unsymmetric cyanine dyes, where a benzoxazole/benzothiazole moiety is linked to a 4-quinoline by a monomethine bridge. Complete 1 H and 13 C resonance assignments enabled us to expand the existing chemical shift reference set for this important class of dyes. Photophysical characterization with standardized single- and double-stranded DNA and RNA targets indicated that all dyes performed similarly upon binding despite being marketed towards different nucleic acid types. NMR spectroscopy and long-timescale molecular dynamics simulations showed that RiboGreen interacts with double-stranded DNA predominantly by two binding modes, electrostatic interactions with the phosphodiester backbone and π-π stacking with the ultimate and penultimate base pairs of the DNA molecule. These results establish the molecular structures of three widely used commercial dyes and provide a structural and mechanistic framework for understanding the fluorogenic properties of this class of dyes. Highlights: Determination of the molecular structures of nucleic acid dyes RiboGreen, OliGreen, and PicoGreen NMR spectroscopic characterization of all three dyes. NMR and MD data indicate binding to be dominated by electrostatic and π-π stacking interactions
Open AccessMolecular Structure and DNA Binding Mode of Unsymmetric Cyanine Dyes RiboGreen and OliGreen
The binding of fluorescent dyes to nucleic acids and their fluorogenic properties are indispensable tools for nucleic acid detection, quantification, and imaging, yet the molecular structures of several widely used commercial dyes have remained unknown. Here, we de novo determined the molecular structures of RiboGreen and OliGreen and confirmed the previously proposed structure of PicoGreen using high-field NMR spectroscopy. All three dyes were identified as unsymmetric cyanine dyes, where a benzoxazole/benzothiazole moiety is linked to a 4-quinoline by a monomethine bridge. Complete 1 H and 13 C resonance assignments enabled us to expand the existing chemical shift reference set for this important class of dyes. Photophysical characterization with standardized single- and double-stranded DNA and RNA targets indicated that all dyes performed similarly upon binding despite being marketed towards different nucleic acid types. NMR spectroscopy and long-timescale molecular dynamics simulations showed that RiboGreen interacts with double-stranded DNA predominantly by two binding modes, electrostatic interactions with the phosphodiester backbone and π-π stacking with the ultimate and penultimate base pairs of the DNA molecule. These results establish the molecular structures of three widely used commercial dyes and provide a structural and mechanistic framework for understanding the fluorogenic properties of this class of dyes. Highlights: Determination of the molecular structures of nucleic acid dyes RiboGreen, OliGreen, and PicoGreen NMR spectroscopic characterization of all three dyes. NMR and MD data indicate binding to be dominated by electrostatic and π-π stacking interactions
- 2 January 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (1)
An accurate and efficient NPT ensemble molecular dynamics simulation method
The accuracy of the NPT ensemble is important for obtaining accurate biomolecular dynamics and thermodynamic properties in molecular dynamics simulations. Although considerable effort has been devoted to improving its accuracy, most studies have not been rigorously validated. We introduce a novel NPT ensemble method that meticulously optimizes the critical components that significantly improve accuracy and efficiency, especially in pressure regulation. In particular, our method (i) incorporated the Martyna–Tobias–Klein correction terms into the equations of motion for the desired NPT partition function, (ii) utilized the Langevin dynamics algorithm for barostat equilibration to reduce mass-dependent ringing effects, (iii) integrated the barostat using the BAOAB scheme to ensure minimal error and high stability, and (iv) employed molecular pressure to optimize the constraint calculation. Tests showed that our NPT ensemble method achieved accurate and well-converged pressure and temperature control in both protein solutions and pure water systems.
- 2 January 2026
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 164 (1)
An accurate and efficient NPT ensemble molecular dynamics simulation method
The accuracy of the NPT ensemble is important for obtaining accurate biomolecular dynamics and thermodynamic properties in molecular dynamics simulations. Although considerable effort has been devoted to improving its accuracy, most studies have not been rigorously validated. We introduce a novel NPT ensemble method that meticulously optimizes the critical components that significantly improve accuracy and efficiency, especially in pressure regulation. In particular, our method (i) incorporated the Martyna–Tobias–Klein correction terms into the equations of motion for the desired NPT partition function, (ii) utilized the Langevin dynamics algorithm for barostat equilibration to reduce mass-dependent ringing effects, (iii) integrated the barostat using the BAOAB scheme to ensure minimal error and high stability, and (iv) employed molecular pressure to optimize the constraint calculation. Tests showed that our NPT ensemble method achieved accurate and well-converged pressure and temperature control in both protein solutions and pure water systems.
- 28 August 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (17) , 8571-8582
Identification of Protein Cryptic Sites via Conformational Dynamics Capturing and Water-Based Pocket Characterization in Molecular Dynamics Simulations
Employing molecular dynamics (MD) simulation to study the formation of novel protein cryptic sites has attracted increasing interest in the field of drug discovery. One specific challenge in this area is finding a viable method to accurately identify and characterize cryptic site transitions from MD simulation results while minimizing the need for extensive human input. Since the formation of cryptic sites often involves significant conformational changes in the protein structure, a method capable of capturing and describing these dynamic pocket transitions with precision is essential. In this paper, we present a new procedure, Conformational Dynamics Capturing and Water-Based Characterization (CDC-WBC). This procedure dynamically identifies the cryptic site region by tracking protein conformational changes observed during molecular dynamics (MD) simulations. The procedure also incorporates water density information to enhance the characterization of cryptic sites across frames. We evaluate the CDC-WBC procedure by applying it to characterize the opening process of the two well-studied cryptic sites in TEM1 β-lactamase. The results demonstrate that the CDC-WBC method accurately captures the open-closed transitions of the two cryptic sites. For comparison, three commonly used protein cavity detection methods in cryptic sites studies, POVME2, Epock, and MDpocket, are applied to identify the "CBT" cryptic site in TEM1 β-lactamase. The results show that the CDC-WBC method outperforms these methods in characterizing the transitions of the "CBT" cryptic site. Additionally, using a benchmark set of 84 protein systems (93 cryptic pockets) from the CryptoSite data set, CDC-WBC consistently shows better performance in distinguishing between the open and closed states of cryptic sites, further highlighting its capability for precise characterization of dynamic cryptic site transitions. The detailed implementation of the CDC-WBC procedure and demo data sets are uploaded to GitHub: https://github.com/TianmingQu/CDC-WBC.git.
- 28 August 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (17) , 8571-8582
Identification of Protein Cryptic Sites via Conformational Dynamics Capturing and Water-Based Pocket Characterization in Molecular Dynamics Simulations
Employing molecular dynamics (MD) simulation to study the formation of novel protein cryptic sites has attracted increasing interest in the field of drug discovery. One specific challenge in this area is finding a viable method to accurately identify and characterize cryptic site transitions from MD simulation results while minimizing the need for extensive human input. Since the formation of cryptic sites often involves significant conformational changes in the protein structure, a method capable of capturing and describing these dynamic pocket transitions with precision is essential. In this paper, we present a new procedure, Conformational Dynamics Capturing and Water-Based Characterization (CDC-WBC). This procedure dynamically identifies the cryptic site region by tracking protein conformational changes observed during molecular dynamics (MD) simulations. The procedure also incorporates water density information to enhance the characterization of cryptic sites across frames. We evaluate the CDC-WBC procedure by applying it to characterize the opening process of the two well-studied cryptic sites in TEM1 β-lactamase. The results demonstrate that the CDC-WBC method accurately captures the open-closed transitions of the two cryptic sites. For comparison, three commonly used protein cavity detection methods in cryptic sites studies, POVME2, Epock, and MDpocket, are applied to identify the "CBT" cryptic site in TEM1 β-lactamase. The results show that the CDC-WBC method outperforms these methods in characterizing the transitions of the "CBT" cryptic site. Additionally, using a benchmark set of 84 protein systems (93 cryptic pockets) from the CryptoSite data set, CDC-WBC consistently shows better performance in distinguishing between the open and closed states of cryptic sites, further highlighting its capability for precise characterization of dynamic cryptic site transitions. The detailed implementation of the CDC-WBC procedure and demo data sets are uploaded to GitHub: https://github.com/TianmingQu/CDC-WBC.git.
- 16 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (23)
A Gaussian kernel Monte Carlo resampling method to construct smooth free energy surface from discrete simulation data
Constructing a free energy surface based on discrete molecular simulation data is a common practice in computational chemistry and biophysics. As a general strategy, histogram-based methods have substantial limitations in producing smooth free energy surfaces from sparse samples. Most histogram-free methods allow for possible smooth global free energy surface mapping but likely lead to significantly compromised local features. This issue is particularly severe when both the global shape and the local free energy transition need to be quantitatively depicted, as often aimed for in general ensemble simulation studies. In this work, we introduce a Gaussian kernel Monte Carlo (GKMC) resampling method to robustly construct a smooth free energy surface from discrete simulation data. In GKMC resampling, the target free energy surface is mapped as the sum of local Gaussian basis functions; the height of each Gaussian basis function is recursively obtained through MC resampling of the simulation data. In this work, the GKMC resampling method is illustrated based on the data from a generalized orthogonal space tempering simulation study of deca-alanine peptide conformational changes in aqueous solution. As revealed in the case study, smooth free energy surfaces that can accurately represent simulated probability distributions could be robustly generated through the GKMC resampling strategy. Because data noise can be effectively removed, local free energy features could be displayed in an informative way. Notably, without impacting the global free energy shape, local free energy smoothness can be conveniently adjusted via the choice of the Gaussian kernel function width. As demonstrated, GKMC resampling is a robust approach for high-quality free energy surface construction.
- 16 June 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (23)
A Gaussian kernel Monte Carlo resampling method to construct smooth free energy surface from discrete simulation data
Constructing a free energy surface based on discrete molecular simulation data is a common practice in computational chemistry and biophysics. As a general strategy, histogram-based methods have substantial limitations in producing smooth free energy surfaces from sparse samples. Most histogram-free methods allow for possible smooth global free energy surface mapping but likely lead to significantly compromised local features. This issue is particularly severe when both the global shape and the local free energy transition need to be quantitatively depicted, as often aimed for in general ensemble simulation studies. In this work, we introduce a Gaussian kernel Monte Carlo (GKMC) resampling method to robustly construct a smooth free energy surface from discrete simulation data. In GKMC resampling, the target free energy surface is mapped as the sum of local Gaussian basis functions; the height of each Gaussian basis function is recursively obtained through MC resampling of the simulation data. In this work, the GKMC resampling method is illustrated based on the data from a generalized orthogonal space tempering simulation study of deca-alanine peptide conformational changes in aqueous solution. As revealed in the case study, smooth free energy surfaces that can accurately represent simulated probability distributions could be robustly generated through the GKMC resampling strategy. Because data noise can be effectively removed, local free energy features could be displayed in an informative way. Notably, without impacting the global free energy shape, local free energy smoothness can be conveniently adjusted via the choice of the Gaussian kernel function width. As demonstrated, GKMC resampling is a robust approach for high-quality free energy surface construction.
- Open Access
- 8 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
From Solution to Gas Phase: Revealing Ligand-Dependent Confor-mations of Ribonuclease A with Tandem-Trapped Ion Mobility Spectrometry
Protein activity depends on motional transitions between conformational states. Modifications or ligand binding can alter protein dynamics, leading to changes in activity. Established biophysical methods effectively determine protein structures but face challenges when investigating dynamic biological processes that involve steady states of transiently populated con-formations. Ion mobility/mass spectrometry shows promise for studying transient protein conformations but characterizes them in a solvent-free environment and does not directly provide detailed structural information. Here, we investigate to what extent subtly different conformational states are retained in their solvent-free environment. To this end, we investigate the conformations of liganded and unliganded ribonuclease A (RNase A) using our tandem-trapped ion mobility spectrome-ter/tandem-mass spectrometer (Tandem-TIMS) in conjunction with molecular dynamics-based computational approaches. RNase A transitions between a closed and an open conformation on the millisecond timescale, with the closed conformation being favored when liganded. Our results indicate that both ligand-bound and unliganded RNase A maintain approximately 80% of their native contacts in a solvent-free environment. This includes crucial interactions between the ligand and the protein scaffold, as well as the ligand's position within the binding pocket. Furthermore, our analysis reveals that when RNase A is ligand-bound, it adopts a more compact structure, as observed in solution. Additionally, significant differences between the open and closed conformations—such as the positioning of Loop 1—are mostly preserved in the solvent-free state, with root mean squared deviations of about 2 Å. In summary, our findings demonstrate the ability of Tandem-TIMS to characterize subtle structural differences between steady-state protein conformations. This ability assumes increased sig-nificance due to the crucial involvement of transient protein assemblies in cellular signaling and neurodegenerative diseases, as well as “hidden” protein states underlying enzyme function that are not directly accessible using established methods.
- 8 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFrom Solution to Gas Phase: Revealing Ligand-Dependent Confor-mations of Ribonuclease A with Tandem-Trapped Ion Mobility Spectrometry
Protein activity depends on motional transitions between conformational states. Modifications or ligand binding can alter protein dynamics, leading to changes in activity. Established biophysical methods effectively determine protein structures but face challenges when investigating dynamic biological processes that involve steady states of transiently populated con-formations. Ion mobility/mass spectrometry shows promise for studying transient protein conformations but characterizes them in a solvent-free environment and does not directly provide detailed structural information. Here, we investigate to what extent subtly different conformational states are retained in their solvent-free environment. To this end, we investigate the conformations of liganded and unliganded ribonuclease A (RNase A) using our tandem-trapped ion mobility spectrome-ter/tandem-mass spectrometer (Tandem-TIMS) in conjunction with molecular dynamics-based computational approaches. RNase A transitions between a closed and an open conformation on the millisecond timescale, with the closed conformation being favored when liganded. Our results indicate that both ligand-bound and unliganded RNase A maintain approximately 80% of their native contacts in a solvent-free environment. This includes crucial interactions between the ligand and the protein scaffold, as well as the ligand's position within the binding pocket. Furthermore, our analysis reveals that when RNase A is ligand-bound, it adopts a more compact structure, as observed in solution. Additionally, significant differences between the open and closed conformations—such as the positioning of Loop 1—are mostly preserved in the solvent-free state, with root mean squared deviations of about 2 Å. In summary, our findings demonstrate the ability of Tandem-TIMS to characterize subtle structural differences between steady-state protein conformations. This ability assumes increased sig-nificance due to the crucial involvement of transient protein assemblies in cellular signaling and neurodegenerative diseases, as well as “hidden” protein states underlying enzyme function that are not directly accessible using established methods.
- Open Access
- 11 March 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (6) , 3032-3043
ABCG2: A Milestone Charge Model for Accurate Solvation Free Energy Calculation
In this report, we describe the development and validation of ABCG2, a new charge model with milestone free energy accuracy, while allowing instantaneous atomic charge assignment for arbitrary organic molecules. In combination with the second-generation general AMBER force field (GAFF2), ABCG2 led to a root-mean-square error (RMSE) of 0.99 kcal/mol on the hydration free energy calculation of all 642 solutes in the FreeSolv database, for the first time meeting the chemical accuracy threshold through physics-based molecular simulation against the golden-standard data set. Against the Minnesota Solvation Database, the solvation free energy calculation on 2068 pairs of a range of organic solutes in diverse solvents led to an RMSE of 0.89 kcal/mol. The 1913 data points of transfer free energies from the aqueous solution to organic solvents obtained an RMSE of 0.85 kcal/mol, corresponding to 0.63 log units for logP. The benchmark on densities of neat liquids for 1839 organic molecules and heat of vaporizations of 874 organic liquids achieved a comparable performance with the default restrained electrostatic potential (RESP) charge method of GAFF2. The fluctuations of assigned partial atomic charges over different input conformations from ABCG2 are demonstrated to be much smaller than those of RESP from statistics of 96 real drug molecules. The validation results demonstrated not only the accuracy but also the transferability and generality of the GAFF2/ABCG2 combination.
- 11 March 2025
- Published by American Chemical Society (ACS) in Journal of Chemical Theory and Computation
- Vol. 21 (6) , 3032-3043
Open AccessABCG2: A Milestone Charge Model for Accurate Solvation Free Energy Calculation
In this report, we describe the development and validation of ABCG2, a new charge model with milestone free energy accuracy, while allowing instantaneous atomic charge assignment for arbitrary organic molecules. In combination with the second-generation general AMBER force field (GAFF2), ABCG2 led to a root-mean-square error (RMSE) of 0.99 kcal/mol on the hydration free energy calculation of all 642 solutes in the FreeSolv database, for the first time meeting the chemical accuracy threshold through physics-based molecular simulation against the golden-standard data set. Against the Minnesota Solvation Database, the solvation free energy calculation on 2068 pairs of a range of organic solutes in diverse solvents led to an RMSE of 0.89 kcal/mol. The 1913 data points of transfer free energies from the aqueous solution to organic solvents obtained an RMSE of 0.85 kcal/mol, corresponding to 0.63 log units for logP. The benchmark on densities of neat liquids for 1839 organic molecules and heat of vaporizations of 874 organic liquids achieved a comparable performance with the default restrained electrostatic potential (RESP) charge method of GAFF2. The fluctuations of assigned partial atomic charges over different input conformations from ABCG2 are demonstrated to be much smaller than those of RESP from statistics of 96 real drug molecules. The validation results demonstrated not only the accuracy but also the transferability and generality of the GAFF2/ABCG2 combination.
- Open Access
- 3 July 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (1)
Force Field X: A computational microscope to study genetic variation and organic crystals using theory and experiment
Force Field X (FFX) is an open-source software package for atomic resolution modeling of genetic variants and organic crystals that leverages advanced potential energy functions and experimental data. FFX currently consists of nine modular packages with novel algorithms that include global optimization via a many-body expansion, acid–base chemistry using polarizable constant-pH molecular dynamics, estimation of free energy differences, generalized Kirkwood implicit solvent models, and many more. Applications of FFX focus on the use and development of a crystal structure prediction pipeline, biomolecular structure refinement against experimental datasets, and estimation of the thermodynamic effects of genetic variants on both proteins and nucleic acids. The use of Parallel Java and OpenMM combines to offer shared memory, message passing, and graphics processing unit parallelization for high performance simulations. Overall, the FFX platform serves as a computational microscope to study systems ranging from organic crystals to solvated biomolecular systems.
- 3 July 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 161 (1)
Open AccessForce Field X: A computational microscope to study genetic variation and organic crystals using theory and experiment
Force Field X (FFX) is an open-source software package for atomic resolution modeling of genetic variants and organic crystals that leverages advanced potential energy functions and experimental data. FFX currently consists of nine modular packages with novel algorithms that include global optimization via a many-body expansion, acid–base chemistry using polarizable constant-pH molecular dynamics, estimation of free energy differences, generalized Kirkwood implicit solvent models, and many more. Applications of FFX focus on the use and development of a crystal structure prediction pipeline, biomolecular structure refinement against experimental datasets, and estimation of the thermodynamic effects of genetic variants on both proteins and nucleic acids. The use of Parallel Java and OpenMM combines to offer shared memory, message passing, and graphics processing unit parallelization for high performance simulations. Overall, the FFX platform serves as a computational microscope to study systems ranging from organic crystals to solvated biomolecular systems.
- 11 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (18) , 3979-3981
Biomolecular Electrostatic Phenomena: An Evergreen Field
- 11 May 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 127 (18) , 3979-3981
Biomolecular Electrostatic Phenomena: An Evergreen Field
- 27 January 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (5) , 2705-2715
Molecular Orientation of −PO3H2 and −COOH Functionalized Dyes on TiO2, Al2O3, ZrO2, and ITO: A Comparative Study
Modifying metal oxides (MOx) with organic monolayers is widely employed to tailor interfacial properties in organic electronic devices and dye-sensitized solar cells. The effects of modification are frequently assessed by performing experiments on model monolayer|MOx interfaces, where an "inert" MOx (e.g., Al2O3) is used as a control for an "active" MOx (e.g., TiO2). An underlying assumption in these studies is that the inert and active monolayer|MOx structures are similar. This assumption was examined here. Using UV-vis attenuated total reflection spectroscopy, we measured the mean tilt angle of 4,4'-(anthracene-9,10-diyl)bis(4,1-phenylene)diphosphonic acid (A1P) adsorbed on indium tin oxide (ITO), TiO2, ZrO2, and Al2O3. When the surface roughness of the MOx substrate and the surface coverage (Gamma) of the A1P film were constant, the orientation of A1P was the same. 4,4'-(Anthracene-9,10-diyl)bis(4,1-phenylene)dicarboxylic acid (A1C) was adsorbed on the same set of MOx substrates. The orientation of A1C and A1P on ITO was the same, which is likely due to the intermolecular interactions resulting from the high and approximately equal G of both films. Comparing A1C films at equal Gamma on TiO2 and Al2O3 with equal surface roughness, again, the orientation was the same. MD simulations of A1C and A1P on TiO2 produced nearly identical tilt angle distributions, supporting the experimental findings. This study provides the first experimental validation of the assumption that the monolayer|MOx structure is the same regardless of the nature of the metal oxide substrate.
- 27 January 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 127 (5) , 2705-2715
Molecular Orientation of −PO3H2 and −COOH Functionalized Dyes on TiO2, Al2O3, ZrO2, and ITO: A Comparative Study
Modifying metal oxides (MOx) with organic monolayers is widely employed to tailor interfacial properties in organic electronic devices and dye-sensitized solar cells. The effects of modification are frequently assessed by performing experiments on model monolayer|MOx interfaces, where an "inert" MOx (e.g., Al2O3) is used as a control for an "active" MOx (e.g., TiO2). An underlying assumption in these studies is that the inert and active monolayer|MOx structures are similar. This assumption was examined here. Using UV-vis attenuated total reflection spectroscopy, we measured the mean tilt angle of 4,4'-(anthracene-9,10-diyl)bis(4,1-phenylene)diphosphonic acid (A1P) adsorbed on indium tin oxide (ITO), TiO2, ZrO2, and Al2O3. When the surface roughness of the MOx substrate and the surface coverage (Gamma) of the A1P film were constant, the orientation of A1P was the same. 4,4'-(Anthracene-9,10-diyl)bis(4,1-phenylene)dicarboxylic acid (A1C) was adsorbed on the same set of MOx substrates. The orientation of A1C and A1P on ITO was the same, which is likely due to the intermolecular interactions resulting from the high and approximately equal G of both films. Comparing A1C films at equal Gamma on TiO2 and Al2O3 with equal surface roughness, again, the orientation was the same. MD simulations of A1C and A1P on TiO2 produced nearly identical tilt angle distributions, supporting the experimental findings. This study provides the first experimental validation of the assumption that the monolayer|MOx structure is the same regardless of the nature of the metal oxide substrate.