JAJuan David Arbelaez

Juan David Arbelaez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Juan David Arbelaez has a total of 137 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of uncrewed aerial system‐derived vegetation indices for forage trait phenomic prediction in oat–pea intercrop breeding trials

    by Milcah Kigoni, Raysa Gevartosky, Lucas B. Munaro, Tim Mies, Luis Gehrke, Jessica Rutkoski, Juan David Arbelaez

    Accelerating genetic gain in intercrop forage breeding requires scalable phenotyping approaches that can capture both yield and quality variation across complex genotype combinations. This study evaluated the use of uncrewed aerial system (UAS)‐derived multispectral vegetation indices (VIs) for predicting forage yield and nutritive quality in oat ( Avena sativa L.)‐pea ( Pisum sativum L.) mixtures. Field trials across three seasons included 24 oat genotypes and five pea varieties evaluated in monocrops and all possible mixture combinations. Key traits included biomass yield (YLD), crude protein (CP), fiber fractions (acid detergent fiber [ADF] and neutral detergent fiber [NDF]), total digestible nutrients (TDN), and relative feed value (RFV). Five VIs (normalized difference vegetation index, green normalized difference vegetation index, normalized difference red edge index, excess green, excess green minus red index) derived from near‐infrared (NIR) and visible bands were incorporated as secondary traits in bivariate and multivariate mixed models to evaluate predictive ability in cross‐validation studies. VIs showed moderate to high heritability ( H 2 = 0.14–0.82) and significant correlations with forage traits in mixtures ( r = 0.25–0.71). Predictive ability varied across models, from −0.16 to 0.68, and was consistently higher for multivariate models (mean ∼0.41) compared to bivariate models (mean ∼0.22). Models integrating all five VIs provided the highest accuracy for YLD, CP, and ADF, whereas NIR‐based indices were most effective for NDF, TDN, and RFV. Green‐band indices were strongly associated with quality‐related traits, while NIR‐based indices better captured yield and fiber variation. These results demonstrate that combining spectrally complementary VIs improves phenomic prediction in oat‐pea systems by capturing both species composition and biomass structure. UAS‐based phenotyping provides an effective framework for high‐throughput selection in intercrop breeding.

  • Open Access

    An in‐depth historical phenotypic and genetic assessment of oat ( Avena sativa L.) breeding at the University of Illinois

    by Sheila Scheffel, Frederic L. Kolb, Steven R. Scofield, Jason Fiedler, Jessica E. Rutkoski, Juan D. Arbelaez

    It is essential to evaluate the effectiveness of breeding programs to ensure they continue to deliver value to stakeholders, including farmers, millers, and consumers. We evaluated the performance of the University of Illinois Oat Breeding Program (UIOBP) by quantifying realized genetic trends for key agronomic, grain quality, and disease resistance traits. Additionally, we assessed the effect of heat stress and genetic diversity to inform future breeding decisions. Our analysis integrated genotypic, pedigree, historical weather, and phenotypic data collected over an 18‐year period from 2002 to 2019. Genetic trends were estimated using mixed models and the control population method. We quantified genetic correlations, rates of genetic gain, and the effects of temperature on yield and test weight, and assessed genetic diversity using molecular marker data, pedigree reconstruction, and population structure. Significant genetic trends were observed for yield (35.8 kg ha − 1 year − 1 ), test weight (0.63 g L − 1 year − 1 ), heading date (−0.01 days year −1 ), and plant height (−0.07 cm year − 1 ), while barley yellow dwarf virus, groat content, and thins (%) showed no significant change. Genetic diversity analyses revealed weak population structure and slightly reduced effective population size in recent parental lines. Phenotypic analyses showed that high temperatures during critical reproductive periods reduced yield and test weight. The UIOBP has maintained genetic diversity while achieving favorable selection response in yield, test weight, heading time, and plant height; however, limited progress in milling traits highlights areas for improvement. These findings demonstrate the continued value of public oat breeding while informing future breeding efforts.

  • Open Access

    Evaluation of strategies for early selection using historical data in a public rice breeding program

    by Sheila Scheffel, Bettina Lado, Fernando Perez de Vida, Federico Molina, Juan David Arbelaez, Juan Rosas

    Increasing selection accuracy for parental lines in the early stages of a breeding program can significantly shorten the breeding cycle and accelerate genetic gain. In this study, we evaluated the impact of incorporating historical data through multi-environment analysis for selection at the early stages of evaluation in a public breeding program. The evaluation strategy employed replicates the breeding program's structure, accounting for the timing of phenotypic data availability. We investigated five prediction strategies starting from single trial analysis, incorporation of one or 5-year historical data, varying levels of connectivity between lines, and the inclusion or exclusion of a genotype by environment interaction term. To compare the prediction strategies, we considered grain yield phenotypic variance partition and predictive ability. Joint analysis of multiple trials and environments led to more accurate estimations of variance components and higher predictive ability for early selection of parents and line advancement. Additionally, we found that modelling genotype by environment interaction did not consistently enhance predictive ability. This study highlights the benefits of joint analyses of multi-environment trials for early selection of parents and lines in breeding programs.

  • Open Access

    Use of historical data improves early selection in a public rice breeding program

    by Sheila Scheffel, Bettina Lado, Fernando Pérez de Vida, Federico Molina, Juan D. Arbeláez, Juan E. Rosas

    Increasing selection accuracy for parental lines in the early stages of a breeding program can significantly shorten the breeding cycle and accelerate genetic gain. Public breeding programs have limited resources, which in many cases implies not having enough funds for genomic selection. In this study, we propose a strategy that allows leveraging a data source that is often overlooked: the breeding program's historical data. We evaluated the impact of incorporating historical data through multi‐environment analysis for selection at early stages of evaluation in a public breeding program. Two distinct breeding goals were assessed: line advancement and parent selection. For the first objective we used available phenotypic data, and for the second objective we leveraged existing pedigree records in addition to the phenotypic data. The evaluation strategy employed replicated the breeding program's structure, accounting for the timing of data availability. We investigated five prediction strategies, starting from single trial analysis, incorporating one or 5 years of historical data, and including or not a genotype by environment interaction term. To compare the prediction strategies, we considered grain yield phenotypic variance partition and predictive ability. Joint analysis of multiple trials and environments led to more accurate estimations of variance components and higher predictive ability for early selection of parents and line advancement. Additionally, we found that modeling genotype by environment interaction did not consistently enhance predictive ability. This study highlights the benefits of joint analyses of multi‐environment trials for early selection of parents and lines in breeding programs.

  • Open Access

    Implementing marker covariates and multi‐trait genomic selection models to improve grain milling, appearance, cooking, and edible quality in rice ( Oryza sativa L.)

    by Anup Dhakal, Maribel Cruz, Katherine Loaiza, Juan Cuasquer, Juan Rosas, Eduardo Graterol, Juan David Arbelaez

    Rice ( Oryza sativa L.) is a staple food for over half of the world's population. With population growth, socioeconomic changes, and shifting consumer lifestyles, the demand for high‐quality rice has surged. Understanding consumer preferences for rice quality traits is crucial for breeders to effectively address evolving market needs. Rice breeding programs assess various quality aspects, including grain shape, appearance, milling efficiency, and cooking and eating qualities. Molecular‐based approaches like marker‐assisted selection and genomic selection (GS) offer promising opportunities to enhance breeding efficiency. In this study, our goal was to build upon our previous findings and improve the predictive ability of GS for primary grain milling and cooking and eating quality traits by incorporating trait marker covariates and highly heritable, high‐throughput secondary traits in multi‐trait genomic selection strategies (MT‐GS). By including amylose content and gelatinization temperature functional markers as covariates in GS models, we improved the predictive ability for primary cooking and eating traits from 21% to 44%. Additionally, integrating secondary traits into MT‐GS increased the predictive ability for milling quality traits from 13.5% to 18% and for cooking and eating traits from 4.6% to 50%. Overall, our study demonstrates the feasibility of incorporating whole‐genome markers, trait markers, and secondary trait information to enhance the predictive ability of GS for grain milling, cooking, and eating qualities in rice.


  • Open Access

    Global genomic population structure of wild and cultivated oat reveals signatures of chromosome rearrangements

    by Wubishet A. Bekele, Raz Avni, Clayton L. Birkett, Asuka Itaya, Charlene P. Wight, Justin Bellavance, Sophie Brodführer, Francisco J. Canales, Craig H. Carlson, Anne Fiebig, et al.

    The genus Avena consists of approximately 30 wild and cultivated oat species. Cultivated oat is an important food crop, yet the broader genetic diversity within the Avena gene pool remains underexplored and underexploited. We characterized over 9,000 wild and cultivated hexaploid oat accessions of global origin using genotyping-by-sequencing. We explored population structure using multidimensional scaling and population-based clustering methods. We also conducted analyses to reveal chromosome regions associated with local adaptation, sometimes resulting from large scale chromosome rearrangements. Here, we report four distinct genetic populations within the wild species A. sterilis, a distinct population of cultivated A. byzantina, and multiple populations within cultivated A. sativa. Some chromosome regions associated with local adaptation are also associated with confirmed structural rearrangements on chromosomes 1A, 1C, 3C, 4C, and 7D. This work provides evidence suggesting multiple polyploid origins, multiple domestications, and/or reproductive barriers amongst Avena populations caused by differential chromosome structure.


  • Open Access

    Implementing multi‐trait genomic selection to improve grain milling quality in oats ( Avena sativa L.)

    by Anup Dhakal, Jesse Poland, Laxman Adhikari, Ethan Faryna, Jason Fiedler, Jessica E. Rutkoski, Juan David Arbelaez

    Oats ( Avena sativa L.) provide unique nutritional benefits and contribute to sustainable agricultural systems. Breeding high‐value oat varieties that meet milling industry standards is crucial for satisfying the demand for oat‐based food products. Test weight, thins, and groat percentage are primary traits that define oat milling quality and the final price of food‐grade oats. Conventional selection for milling quality is costly and burdensome. Multi‐trait genomic selection (MTGS) combines information from genome‐wide markers and secondary traits genetically correlated with primary traits to predict breeding values of primary traits on candidate breeding lines. MTGS can improve prediction accuracy and significantly accelerate the rate of genetic gain. In this study, we evaluated different MTGS models that used morphometric grain traits to improve prediction accuracy for primary grain quality traits within the constraints of a breeding program. We evaluated 558 breeding lines from the University of Illinois Oat Breeding Program across 2 years for primary milling traits, test weight, thins, and groat percentage, and secondary grain morphometric traits derived from kernel and groat images. Kernel morphometric traits were genetically correlated with test weight and thins percentage but were uncorrelated with groat percentage. For test weight and thins percentage, the MTGS model that included the kernel morphometric traits in both training and candidate sets outperformed single‐trait models by 52% and 59%, respectively. In contrast, MTGS models for groat percentage were not significantly better than the single‐trait model. We found that incorporating kernel morphometric traits can improve the genomic selection for test weight and thins percentage.


  • Open Access

    ‘Single-Seed-SpeedBulks:’ a protocol that combines ‘speed breeding’ with a cost-efficient modified single-seed descent method for rapid-generation-advancement in oat (Avena sativa L.)

    by Milcah Kigoni, Megan Choi, Juan David Arbelaez

    Background: In plant breeding, one of the most cost-effective and efficient ways to increase genetic gain is to reduce the breeding cycle time. In general, modern breeding methods for self-pollinated crops should strive to develop fixed lines at the lowest possible cost and in the minimum possible amount of time. Previous studies on spring oat (Avena sativa L.) showed that combining high plant density with limited soil fertility and moisture levels in a growth media like sand effectively decreases the time and cost of generating fixed single-seed descent lines. More recently, ‘speed breeding,’ or the exposure to prolonged photoperiod regimes of 22 h, has been shown to decrease flowering time in oat significantly. The goal of this study was to combine ‘speed breeding’ with high-density planting in a limited soil fertility media to reduce further the costs and time required to develop oat single-seed-descent lines. Results: We grew oat plants at low density in potting-mix (control), high density in potting-mix (HD-soil), and high density in sand (HD-sand) under 16 and 22 h of day length. We observed that oat plants grown in HD-sand and exposed to 22 h day length reduced their flowering time by around 20 and 5 days on average compared to those grown in control conditions at 16 and 22 h, respectively. We also observed that 85% of plants grown at high density in sand produced a single seed when grown in bulk conditions. In contrast, only 40% of plants grown at high density in potting-mix produced a single seed. Conclusions: Our novel protocol showed that oat plants grown in high-density bulks, using sand media and 22-hour day length, reduced their flowering time by 20 days compared to control conditions and produced plants with single seeds, following closely single-seed descent assumptions while significantly reducing labor costs and greenhouse space. This methodology can be deployed in oat breeding programs to help them accelerate their rate of genetic grain for multiple traits.


  • Open Access

    ‘Single-Seed-SpeedBulks:’ a protocol that combines ‘speed breeding’ with a cost-efficient modified single-seed descent method for rapid-generation-advancement in oat (Avena sativa L.)

    by Milcah Kigoni, Megan Choi, Juan David Arbelaez

    Background In plant breeding, one of the most cost-effective and efficient ways to increase genetic gain is to reduce the breeding cycle time. In general, modern breeding methods for self-pollinated crops should strive to develop fixed lines at the lowest possible cost and in the minimum possible amount of time. Previous studies on spring oat (Avena sativa L.) showed that combining high plant density with limited soil fertility and moisture levels in a media like sand effectively decreases the time and cost of generating fixed single-seed descent lines. More recently, ‘speed breeding’, or the exposure of prolonged photoperiod regimes of 22 hours, has been shown to decrease flowering time in oat significantly. The goal of this study was to combine ‘speed breeding’ with high-density planting in a limited soil fertility media to reduce further the costs and time required to develop oat single-seed-descent lines. Results We grew oat plants at low density in potting-mix (control), high density in potting-mix (HD-soil), and high density in sand (HD-sand) under 16 and 22 hours of day length. We observed that oat plants grown in HD-sand and exposed to 22 hours day length reduced their flowering time by around 20 and 5 days on average compared to those grown in control conditions at 16 and 22 hours, respectively. We also observed that 85% of plants grown at high density in sandproduced a single seed when grown in bulk conditions. In contrast, only 40% of plants grown at high density in potting-mix produced a single seed. Conclusions Our novel protocol showed that oat plants grown in high-density bulks, using sand media and 22-hour day length reduced their flowering time by 20 days compared to control conditions and produced plants with single seeds, following closely single-seed descent assumptions while significantly reducing labor costs and greenhouse space. This methodology can be deployed in oat breeding programs to help them accelerate their rate of genetic grain for multiple traits.

  • Open Access

    Genetic and phenotypic characterization of rice grain quality traits to define research strategies for improving rice milling, appearance, and cooking qualities in Latin America and the Caribbean

    by Maribel Cruz, Juan David Arbelaez, Katherine Loaiza, Juan Cuasquer, Juan Rosas, Eduardo Graterol

    Rice ( Oryza sativa L.)grain quality is a set of complex interrelated traits that include grain milling, appearance, cooking, and edible properties. As consumer preferences in Latin America and the Caribbean evolve, determining what traits best capture regional grain quality preferences is fundamental for breeding and cultivar release. In this study, a genome‐wide association study (GWAS), marker‐assisted selection (MAS), and genomic selection (GS) were evaluated to help guide the development of new breeding strategies for rice grain quality improvement. For this purpose, 284 rice lines representing over 20 yr of breeding in Latin America and the Caribbean were genotyped and phenotyped for 10 different traits including grain milling, appearance, cooking, and edible quality traits. Genetic correlations among the 10 traits ranged from −0.83 to 0.85. A GWAS identified 19 significant marker/trait combinations associated with eight grain quality traits. Four functional markers, three located in the Waxy and one in the starch synthase IIa genes, were significantly associated with six grain‐quality traits. These markers individually explained 51–75% of the phenotypic variance depending on the trait, clearly indicating their potential utility for MAS. Cross‐validation studies to evaluate predictive abilities of four different GS models for each of the 10 quality traits were conducted and predictive abilities ranged from 0.3 to 0.72. Overall, the machine learning model random forest had the highest predictive abilities and was especially effective for traits where large effect quantitative trait loci were identified. This study provides the foundation for deploying effective molecular breeding strategies for grain quality in Latin American rice breeding programs.