GFGabrielle Foran

Gabrielle Foran

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Gabrielle Foran has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Measuring ionic conductivity in electrodes prepared by solvent-free melt extrusion

    by Charlotte Sorel, Paul Nicolle, Gabrielle Foran, Arnaud Prébé, Mickael Dollé

    Solid polymer electrolytes are electronically insulating. This allows ionic conductivity to be isolated in solid state electrodes.

  • Open Access

    Ion transport in a solvent-free crosslinked polymer electrolyte

    by Gabrielle Foran, Natasha Shogi, David Lepage, Steeve Rousselot, Arnaud Prébé, Mickael Dollé

    In addition to improved energy density due to compatibility with lithium metal electrodes, solid electrolyte-based systems have the added benefit of increased mechanical strength and flexibility compared to their liquid-containing counterparts. To this end, a series of crosslinked solid polymer electrolytes prepared via solvent-free polymerization reactions of epoxide and amine functional groups is presented here. The impact of salt loading on ion transport in this crosslinked material is investigated by determining the lithium ion diffusion coefficient, the relative proportion of lithium ion pairs with respect to free lithium ions and the ionic conductivity as a function of the molar ratio of lithium to ethylene oxide (r). The material with r = 0.07 was found to have the highest ionic conductivity despite middling ion mobility, salt content and lithium-ion transport properties. It was determined that the ionic conductivity of the crosslinked electrolyte was influenced by a combination of salt loading, ion pairing and ion mobility. The electrochemical and mechanical stability of the material with r = 0.07 were evaluated and compared with a traditional PEO-LiTFSI electrolyte. Although similar electrochemical stability was observed, the crosslinked electrolyte had significantly improved lithium ion transport properties and higher mechanical strength.

  • Open Access

    The impact of solvent exposure during preparation on the performance of poly(ethylene) oxide–Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 hybrid electrolytes

    by Gabrielle Foran, Cédric Barcha, Caroline St-Antoine, Arnaud Prébé, Mickael Dollé

    Poly(ethylene oxide)–Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 hybrid electrolytes were prepared by solution casting and solvent-free melt processing. Melt processing improved ceramic particle distribution. Residual solvent reduced stability with lithium metal.


  • Open Access

    Optimizing the dry processing parameters of thermoplastic vulcanizate electrolytes for improved microstructure and its impact on electrochemical stability

    by Mona Azimi, Gabrielle Foran, Cédric Barcha, Caroline St-Antoine, Arnaud Prébé, Mickael Dollé

    Processing parameters affect the performance and stability of thermoplastic vulcanizate electrolytes. Electrolytes with better phase dispersion were more resistant to oxidative damage and could be cycled longer in symmetric Li–Li cells.


  • Open Access

    Impact of functional groups on lithium salt dispersion and mobility in polymer electrolytes

    by Gabrielle Y. Foran, Caroline St‐Antoine, David Lepage, Mengyang Cui, Runze Zheng, Arnaud Prébé, Gillian R. Goward, Mickaël Dollé

    Solid Polymer electrolytes are versatile, highly processible and electrochemically compatible with solid electrode materials. The versatility of these materials is a result of the existence of many possible conductive polymer‐salt, polymer‐polymer and salt‐salt combinations. Despite the wide array of available lithium salts, most polymer electrolyte materials are made using lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) due to its long history of achieving relatively high ionic conductivities in polymer electrolyte systems with the most famous being poly(ethylene oxide) (PEO). It is however possible that better ionic conductivities can be achieved with different salts and/or in polymer matrices containing different functional groups. This is because ionic conductivity in polymer electrolytes is partially based on the ability of the polymer matrix to dissolve and bond to the salt. These interactions impact local‐scale ion mobility which can be measured via NMR spectroscopy using pulsed field gradient experiments. In this work, polymer electrolytes are prepared using PEO, hydrogenated nitrile butadiene rubber and poly(propylene) carbonate. Ion mobility, lithium conductivity and salt‐polymer interactions are investigated to compare interactions between LiTFSI and lithium cyano(trifluorosulfonyl)imide in polymers with common salt‐dissociating functional groups such as ethyl, nitrile and carbonate to determine the impact of these interactions on ionic conductivity.


  • Relationship between the intermolecular interactions of carbonyl (PC) with nitrile (HNBR) functional groups and the flash point of a gel polymer electrolyte

    by Caroline St-Antoine, David Lepage, Gabrielle Foran, Arnaud Prébé, David Aymé-Perrot, Dominic Rochefort, Mickaël Dollé

    Flash point temperatures of HNBR–PC and HNBR–PC–LiTFSI gel polymer electrolytes with different nitrile content are reported. Molecular interactions were found to impact gel flammability.


  • Open Access

    One-pot synthesis of LiAlO2-coated LiNi0.6Mn0.2Co0.2O2 cathode material

    by Ouardia Touag, Gaël Coquil, Mathieu Charbonneau, Gabrielle Foran, Amrita Ghosh, Denis Mankovsky, Mickaël Dollé

    This work presents a scalable and efficient one-pot synthesis combining the co-precipitation of LiNi0.6Mn0.2Co0.2O2 (NMC622) and its surface modification by a LiAlO2 coating enhancing the active materials properties.


  • Open Access

    Use of Solid-State NMR Spectroscopy for the Characterization of Molecular Structure and Dynamics in Solid Polymer and Hybrid Electrolytes

    by Gabrielle Foran, Nina Verdier, David Lepage, Cédric Malveau, Nicolas Dupré, Mickaël Dollé

    Solid-state NMR spectroscopy is an established experimental technique which is used for the characterization of structural and dynamic properties of materials in their native state. Many types of solid-state NMR experiments have been used to characterize both lithium-based and sodium-based solid polymer and polymer–ceramic hybrid electrolyte materials. This review describes several solid-state NMR experiments that are commonly employed in the analysis of these systems: pulse field gradient NMR, electrophoretic NMR, variable temperature T1 relaxation, T2 relaxation and linewidth analysis, exchange spectroscopy, cross polarization, Rotational Echo Double Resonance, and isotope enrichment. In this review, each technique is introduced with a short description of the pulse sequence, and examples of experiments that have been performed in real solid-state polymer and/or hybrid electrolyte systems are provided. The results and conclusions of these experiments are discussed to inform readers of the strengths and weaknesses of each technique when applied to polymer and hybrid electrolyte systems. It is anticipated that this review may be used to aid in the selection of solid-state NMR experiments for the analysis of these systems.


  • Open Access

    Thermal and Electrochemical Properties of Solid Polymer Electrolytes Prepared via Lithium Salt-Catalyzed Epoxide Ring Opening Polymerization

    by Gabrielle Foran, Nina Verdier, David Lepage, Arnaud Prébé, David Aymé-Perrot, Mickaël Dollé

    Solid polymer electrolytes have been widely proposed for use in all solid-state lithium batteries. Advantages of polymer electrolytes over liquid and ceramic electrolytes include their flexibility, tunability and easy processability. An additional benefit of using some types of polymers for electrolytes is that they can be processed without the use of solvents. An example of polymers that are compatible with solvent-free processing is epoxide-containing precursors that can form films via the lithium salt-catalyzed epoxide ring opening polymerization reaction. Many polymers with epoxide functional groups are liquid under ambient conditions and can be used to directly dissolve lithium salts, allowing the reaction to be performed in a single reaction vessel under mild conditions. The existence of a variety of epoxide-containing polymers opens the possibility for significant customization of the resultant films. This review discusses several varieties of epoxide-based polymer electrolytes (polyethylene, silicone-based, amine and plasticizer-containing) and to compare them based on their thermal and electrochemical properties.


  • Open Access

    Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

    by Nina Verdier, Gabrielle Foran, David Lepage, Arnaud Prébé, David Aymé-Perrot, Mickaël Dollé

    With the ever-growing energy storage notably due to the electric vehicle market expansion and stationary applications, one of the challenges of lithium batteries lies in the cost and environmental impacts of their manufacture. The main process employed is the solvent-casting method, based on a slurry casted onto a current collector. The disadvantages of this technique include the use of toxic and costly solvents as well as significant quantity of energy required for solvent evaporation and recycling. A solvent-free manufacturing method would represent significant progress in the development of cost-effective and environmentally friendly lithium-ion and lithium metal batteries. This review provides an overview of solvent-free processes used to make solid polymer electrolytes and composite electrodes. Two methods can be described: heat-based (hot-pressing, melt processing, dissolution into melted polymer, the incorporation of melted polymer into particles) and spray-based (electrospray deposition or high-pressure deposition). Heat-based processes are used for solid electrolyte and electrode manufacturing, while spray-based processes are only used for electrode processing. Amongst these techniques, hot-pressing and melt processing were revealed to be the most used alternatives for both polymer-based electrolytes and electrodes. These two techniques are versatile and can be used in the processing of fillers with a wide range of morphologies and loadings.