MCMałgorzata Chmiel

Małgorzata Chmiel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Małgorzata Chmiel has a total of 115 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On the quieting of glaciohydraulic tremor

    by Małgorzata Chmiel, Nicoletta Caldera, Florent Gimbert, Gerrit Olivier, Alberto Guadagnini, Dominik Gräff, Manuela Köpfli, Mauro Werder, Fabian Walter

    The subglacial hydraulic system strongly modulates glacier motion, yet the links between subglacial water flow, basal pressure, and short-lived drainage reorganization remain difficult to observe directly. Seismology can track seismic power generated by turbulent subglacial water flow, known as glaciohydraulic tremor (GHT). At Rhône Glacier, Switzerland, previous observations documented periods of GHT quieting around stick-slip tremor during elevated basal water pressure, but the physical origin of this quieting remained incompletely understood. Here, we combine seismic power analysis, matched-field processing, borehole water pressure measurements, surface velocity, runoff, and hydraulic-potential routing to investigate the origin of GHT quieting. The quieting is strongest in the 10–20 Hz band and recurs across stick-slip episodes, whereas the 6–8 Hz band shows a weaker response. Matched-field processing shows that coherent GHT sources persist during quieting near an inferred subglacial drainage pathway, suggesting reduced hydraulic–seismic coupling rather than disappearance of the hydraulic source. Physics-based hydraulic calculations show that near-complete filling of broad, low-aspect-ratio conduits can increase wetted perimeter and frictional resistance, producing modeled local discharge reductions of ∼20–28% and seismic-power decreases of ∼1.2–1.8 dB. We interpret GHT quieting as a seismic signature of transient drainage reorganization during rising basal water pressure. Our results suggest that localized, transiently flow-limiting drainage elements can redistribute water across the wider subglacial drainage system, modulating basal water pressure and glacier motion well beyond the element itself. More broadly, cryoseismic observations can help identify shortlived changes in drainage-system state, hydraulic resistance, and ice–water coupling beneath glaciers.

  • Geophysical Processing with dense arrays in passive and active seismic configurations

    by Malgorzata Chmiel

    Traitement de données géophysiques en réseaux denses en configuration sismique passive et active: En géophysique, les réseaux denses améliorent la caractérisation spatiale et fréquentielle des différents types d’ondes dans le milieu. Bien entendu, l’acquisition en surface est sujette aux ondes de surface qui sont très fortes. Les ondes de surface ont un fort impact sur les données géophysiques acquises au niveau du sol. Elles peuvent être considérées comme du bruit et être sujettes à la suppression puisqu’elles cachent l’information de sous-surface. Cependant, elles peuvent être utiles pour l’imagerie de proche surface si elles sont convenablement récupérées.Dans tous les cas, leur caractérisation est cruciale en géophysique d’exploration active et passive. Dans la surveillance microsismique passive, le bruit de surface ambiant est composé d’ondes de surface. L’objectif principal de la surveillance passive est de minimiser l’impact des ondes de surface sur les données microsismiques. Le fort bruit de surface diminue la sensibilité etl’efficacité des méthodes de détection et de localisation. De plus, les méthodes actuelles de localisation et de détection nécessitent généralement la connaissance d’informations telles qu’un un modèle de vitesse ou un modèle d’événement. Dans la sismique active, de fortes ondes de surface sont générés par des sources actives. Les stratégies actuelles de traitement sont généralement basées sur une sélection manuelle des ondes de surface afin de choisir lesquelles garder. Il s’agit là d’une tâche complexe, coûteuse et sujette à interprétation. Cependant, cette tâche est nécessaire pour l’imagerie de proche-surface et de sous-surface. Les ondes de surface peuvent être particulièrement difficiles à récupérer dans des acquisitions clairsemées.Nous proposons d’appliquer les techniques d’interférométrie et de formation de voies (telles que le Matched Field Processing) dans le contexte des réseaux denses. Une densité de traces importante ouvre de nouvelles possibilités dans les traitements géophysiques, qu’ils soient actifs ou passifs. Nous montrons que le bruit ambiant peut être utilisé dans le traitement microsismique pour extraire des informations importantes sur les propriétés du milieu. De plus, nous développons une approche de débruitage qui permet de supprimer les sources de bruit à la surface et détecter les événements microsismiques. Nous proposons également une méthode automatique de détection et de localisation qui se base sur une quantité minimale d’information préalable qui permet de récupérer la distribution des hétérogénéités du réservoir, dans le voisinage du puits. En ce qui concerne la sismique active, nous proposons une approche interférométrique et automatique de caractérisation des ondes de surface. Nous récupérons les noyaux de sensibilité de phase des ondes de surface entre deux points quelconques de l’acquisition. Ces noyaux de sensibilité sont par conséquent utilisés pour obtenir les courbes de dispersion multimodales. Ces courbes de dispersion permettent la séparation des différents modes des ondes de surface, et fournissent l’information de proche surface suite à une simple inversion.Le réseau dense permet l’amélioration des méthodes présentées ci-dessus: elle permet des applications alternatives et innovantes dans le traitement du signal géophysique.

  • Open Access

    Seasonal preconditioning and triggering of alpine mass movements at an active rock slope from machine-learning seismic monitoring

    by Małgorzata Chmiel, Fabian Walter, Lena Husmann, Giacomo Belli, Emanuele Marchetti, Clément Hibert, Nils Hählen, Christian Kienholz

    Rock slopes in high-mountain environments are increasingly affected by climate-driven changes in thermal and hydrological conditions, yet links between environmental forcing, deep-seated deformation, and surface mass-movement activity remain poorly constrained at the event scale. Here, we present a continuous three-year seismic catalog of nearly 13,000 detected mass-movement events at the Spitze Stei rock slope in the Swiss Alps, generated using a Random Forest classifier applied to continuous seismic data. The catalog reveals a bimodal seasonal pattern, with enhanced activity in early summer and autumn. Statistical analyses identify rainfall intensity as the dominant short-term trigger during the warm season, whereas the duration of above-freezing periods controls activity during winter and transitional freeze-thaw conditions. Beyond immediate triggers, seasonal preconditioning affects mass movement activity. Elevated spring activity coincides with snowmelt-driven pore-pressure increases and material weakened by winter freeze-thaw cycles, while the autumn peak occurs during maximum seasonal thaw depth, when near-surface layers are mechanically weakened and highly responsive to short-term meteorological forcing. Comparison with GPS displacement data shows that deep-seated deformation is seasonally controlled by hydrological forcing in spring and early summer, whereas surface mass movements do not systematically scale with deep creep later in the year. These results demonstrate that thaw depth strongly impacts seasonal susceptibility, while short-term hydrological and thermal perturbations initiate individual failures. Continuous ML-based seismic monitoring therefore provides a quantitative framework for linking event-scale mass-movement activity with evolving environmental forcing in high-mountain terrain.

  • Open Access

    Landslide hazard cascades can trigger earthquakes

    by Zhen Zhang, Min Liu, Yen Joe Tan, Fabian Walter, Siming He, Małgorzata Chmiel, Jinrong Su

    While earthquakes are well-known to trigger surface hazards and initiate hazard cascades, whether surface hazards can instead trigger earthquakes remains underexplored. In 2018, two landslides on the Tibetan plateau created landslide-dammed lakes which subsequently breached and caused catastrophic outburst floods. Here we build an earthquake catalog using machine-learning and cross-correlation-based methods which shows there was a statistically significant increase in earthquake activity (local magnitude ≤ 2.6) as the landslide-dammed lake approached peak water level which returned to the background level after dam breach. We further find that ~90% of the seismicity occurred where Coulomb stress increased due to the combined effect of direct loading and pore pressure diffusion. The close spatial and temporal correlation between the calculated Coulomb stress increase and earthquake activity suggests that the earthquakes were triggered by these landslide hazard cascades. Finally, our Coulomb stress modeling considering the properties of landslide-dammed lakes and reservoir-induced earthquakes globally suggests that earthquake triggering by landslide-dammed lakes and similar structures may be a ubiquitous phenomenon. Therefore, we propose that earthquake-surface hazard interaction can include bidirectional triggering which should be properly accounted for during geological hazard assessment and management in mountainous regions.


  • Open Access

    Seismic Monitoring and Geomorphic Impacts of the Catastrophic 2018 Baige Landslide Hazard Cascades in the Tibetan Plateau

    by Zhen Zhang, Yen Joe Tan, Fabian Walter, Siming He, Małgorzata Chmiel, Jinrong Su

    Surface hazards can form hazard cascades which expand their reach. However, our understanding of their complex dynamics and ability to mitigate their impacts remain limited. In 2018, two landslides dammed the Jinsha River in the Tibetan plateau and formed landslide‐dammed lakes. Subsequent dam breaches prompted the evacuation of >120,000 people. An early warning system for floods using a regional seismic network has been proposed on the basis of catastrophic floods having been detected ∼100 km away, with seismic energy proportional to discharge. Surprisingly, we find that this catastrophic outburst flood was undetectable beyond a few kilometers, with peak seismic energy preceding peak discharge. We propose that river channel stability also controls seismic energy generation and should be considered for accurate monitoring of catastrophic floods. In contrast, we find that the various processes during dam breach can be well‐characterized seismically further away and provide warning ∼60 min before discharge exceeds monsoon flood levels. We also show that numerical modeling of dam breaches which typically lacks in situ measurements can benefit from incorporating seismic data as constraints. Finally, we show that this event drastically increased sediment fluxes ∼670 km downstream for years and may significantly reduce the capacity of hydropower plants. Our results reveal ways to improve early warning of catastrophic outburst floods and the need to consider surface hazards' long‐term impact when managing infrastructure in mountainous regions.


  • Open Access

    Towards a better understanding of debris flow sediment sources: Monitoring of an active rock slope at Spitze Stei, Switzerland

    by Małgorzata Chmiel, Lena Husmann, Fabian Walter, Huw Horgan, Giacomo Belli, Emanuele Marchetti, Christian Kienholz

    Rapid process cascades can lead to destructive debris flows. Identifying and characterizing the processes conditioning debris-flow occurrence will strongly contribute to the mitigation of debris-flow hazards. In recent years, the rock slope near “Spitze Stei”, in the Kandersteg region, Switzerland, has exhibited elevated displacement rates exceeding 10 cm per day, suggesting a growing instability up to 20 million m3. The accumulated sediments at the bottom of the Spitze Stei slope are mobilized as debris flows by melting snow and heavy summer precipitations. Here, we use seismology combined with an intelligent algorithm to automatically detect rockfall and landslides at the Spitze Stei rock slope. These mass movements act as primary sediment sources delivering sediments to a debris-prone channel. Our initial results quantify mass movement activity before two debris flow events that occurred in 2022 and identify their triggers. Such analysis can contribute towards mitigating debris flow hazards and extending warning time, especially for debris flows triggered by factors other than precipitation.

  • Open Access

    Seismic Constraints on Damage Growth Within an Unstable Hanging Glacier

    by Małgorzata Chmiel, Fabian Walter, Antoine Pralong, Lukas Preiswerk, Martin Funk, Lorenz Meier, Florent Brenguier

    Forecasting hanging glacier instabilities remain challenging as sensing technology focusing on the ice surface fails to detect englacial damage leading to large‐scale failure. Here, we combine icequake cluster analysis with coda wave interferometry constraining damage growth on Switzerland's Eiger hanging glacier before a 15,000 m3 break‐off event. The method focuses on icequake migration within clusters rather than previously proposed “event counting.” Results show that one cluster originated from the glacier front and migrated by 13.9(±1.2) m within 5 weeks before the break‐off event. The corresponding crevasse extension separates unstable and stable ice masses. We use the measured source displacement for damage parametrization and find a 90% agreement between an analytical model based on damage mechanics and frontal flow velocities measured with an interferometric radar. Our analysis provides observational constraints for damage growth, which to date is primarily a theoretical concept for modeling englacial fractures.


  • Open Access

    Seismic constraints on damage growth within an unstable hanging glacier

    by Małgorzata Chmiel, Fabian Walter, Antione Pralong, Lukas E Preiswerk, Martin Funk, Lorenz Meier, Florent Brenguier

    Forecasting of hanging glacier instabilities remains challenging as sensing technology focusing on the ice surface fail to detect englacial damage leading to large-scale failure. Here we combine icequake cluster analysis with coda wave interferometry constraining damage growth on Switzerland’s Eiger hanging glacier before a 15,000m3 break-off event. The method focuses on icequake migration within clusters rather than previously proposed “event counting”. Results show that one cluster originated from the glacier front and migrated by 13(+/- 4) m within five weeks before the break-off event. The corresponding crevasse extension separates unstable and stable ice masses. We use the measured source displacement for damage parametrization and find a 90% agreement between an analytical model based on damage mechanics and frontal flow velocities measured with an interferometric radar. Our analysis provides observational constraints for damage growth, which to date is primarily a theoretical concept for modeling englacial fractures.

  • Open Access

    Brief communication: Seismological analysis of flood dynamics and hydrologically triggered earthquake swarms associated with Storm Alex

    by Małgorzata Chmiel, Maxime Godano, Marco Piantini, Pierre Brigode, Florent Gimbert, Maarten Bakker, Françoise Courboulex, Jean-Paul Ampuero, Diane Rivet, Anthony Sladen, et al.

    On 2 October 2020, the Maritime Alps in southern France were struck by the devastating Storm Alex, which caused locally more than 600 mm of rain in less than 24 h. The extreme rainfall and flooding destroyed regional rain and stream gauges. That hinders our understanding of the spatial and temporal dynamics of rainfall–runoff processes during the storm. Here, we show that seismological observations from permanent seismic stations constrain these processes at a catchment scale. The analysis of seismic power, peak frequency, and the back azimuth provides us with the timing and velocity of the propagation of flash-flood waves associated with bedload-dominated phases of the flood on the Vésubie River. Moreover, the combined short-term average to long-term average ratio and template-matching earthquake detection reveal that 114 local earthquakes between local magnitude ML=-0.5 and ML=2 were triggered by the hydrological loading and/or the resulting in situ underground pore pressure increase. This study shows the impact of Storm Alex on the Earth's surface and deep-layer processes and paves the way for future works that can reveal further details of these processes.


  • Open Access

    Analyzing Bulk Flow Characteristics of Debris Flows Using Their High Frequency Seismic Signature

    by Zhen Zhang, Fabian Walter, Brian W. McArdell, Tjalling de Haas, Michaela Wenner, Małgorzata Chmiel, Siming He

    Quantifying debris‐flow characteristics remains a key challenge in natural hazard research. Recent studies suggest that seismic signals can reveal debris‐flow properties. However, the accuracy and applicability of theoretical models linking bulk flow properties to the seismic signature of a debris flow remain elusive. By extending a previously proposed model of random single‐particle impact forces to multi‐particle force chains acting on the channel bed, we describe the generation of high frequency seismic signals, and thereby estimate the bulk flow dynamics of six debris‐flow events at Illgraben, Switzerland. The theoretically predicted basal force fluctuations agree with in‐situ measurements at a basal force plate and seismic signals recorded adjacent to the channel. According to our model, both random single‐particle impacts and random impacts caused by multi‐particle force chains control basal force fluctuations. The relative contributions of single particles and of multi‐particle force chains may vary significantly for different events and different positions within events. The relative contribution of multi‐particle force chains is expected to be larger in the flow front, where particle concentrations are higher. The ratio between single‐particle and multi‐particle contributions appears to control the non‐linear relation between flow depth and the magnitude of the high frequency seismic signals. Our results suggest that fluctuating basal forces are strongly controlled by particle size and flow depth, and open new perspectives for the understanding of bulk flow characteristics, such as flow depth and weight, and of the high frequency seismic signals generated by debris flows.