MPMartin Prokop

Martin Prokop

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Martin Prokop has a total of 96 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development and status of electrochemical engineering

    by A. Bergel, H. Bergmann, K. Bouzek, M.G.S. Ferreira, G.H. Kelsall, U. Krewer, G. Kreysa, F. Lapicque, M. Paidar, M. Prokop, et al.

  • Open Access

    Real-time probing of adsorption dynamics on Pt nanoparticles: Competitive interactions and site blocking in electrocatalysis

    by Bruna Ferreira Gomes, Rameshwori Loukrakpam, Carlos M.S. Lobo, Tomas Bystron, Martin Prokop, Rodrigo Q. Albuquerque, Lu Xia, Wulyu Jiang, F. Pelayo García de Arquer, Karel Bouzek, et al.

  • Open Access

    Real-time Probing of Adsorption Dynamics on Pt Nanoparticles: Competitive Interactions and Site Blocking in Electrocatalysis

    by Bruna Ferreira Gomes, Rameshwori Loukrakpam, Carlos Manuel Silva Lobo, Tomas Bystron, Martin Prokop, Rodrigo Q. Albuquerque, Lu Xia, Wulyu Jiang, F. Pelayo García de Arquer, Karel Bouzek, et al.

    Electrochemical energy conversion involves both steady-state and transient phenomena, with the latter being difficult to probe under realistic conditions. Conventional in situ/operando X-ray absorption spectroscopy often lacks time resolution and provides mainly qualitative insights. In this study, we show that the Δμ XANES method, applied to the Pt/H3PO3 system, enables semi-quantitative tracking of adsorption dynamics. It distinguishes H3PO3 concentrations and reveals competition for Pt sites among O-, H-, CO-, H3PO3-, and H3PO4-derived species. Despite XAS being bulk-sensitive, Δμ yields indirect yet reliable surface information. Coupled with time-resolved fixed-energy X-ray absorption voltammetry (FEXRAV), we monitor in real time the removal of CO and its competition with H3PO3, a key impurity in high-temperature polymer electrolyte membrane fuel cells. Machine learning validation confirms predictive power despite low signal-to-noise ratio. This establishes Δμ XANES combined with FEXRAV as a versatile tool for probing interfacial dynamics in fuel cells, electrolyzers, and CO2 reduction technologies.

  • Open Access

    Activity and degradation of Pt–Co and Pt–Ni alloy catalysts for application in high-temperature PEM fuel cells

    by Jan Dismas Buriánek, Martin Prokop, Tomas Bystron, Martin Veselý, Lukáš Koláčný, Bruna Ferreira Gomes, Carlos Manuel Silva Lobo, Matija Gatalo, Luka Pavko, Nejc Hodnik, et al.

    In the emerging hydrogen energy economy, proton-exchange membrane fuel cells (PEMFCs) serve as a key enabling technology, yet their cost is among other things dominated by platinum group metals-based cathode catalysts. This paper is focused on investigation of intermetallic Pt-Co and Pt-Ni nanoparticles supported on carbon (Ketjen Black, reduced graphene oxide) as low-Pt-load candidates for high-temperature PEMFCs (HT-PEMFCs) operated at elevated temperature ~180 °C in the presence of concentrated phosphoric acid. Catalytic activity toward the oxygen reduction reaction (ORR) was quantified by rotating electrode measurements (exchange current densities, Tafel slopes), and stability was probed by leaching in 97.6 wt.% H3PO4 at 180 °C followed by post-exposure characterization. A suite of techniques – XAS, XRD, TEM/EDS, XRF, Raman spectroscopy and ICP-OES – was used to study changes composition and structure during degradation. All alloy catalysts showed in HClO4 at 25 °C higher ORR activity than commercial Pt/C. However, exposure to concentrated H3PO4 at 180 °C caused electrochemically active surface area loss, reduced ORR activity, Pt crystallite growth, Co/Ni dissolution, and surface reorganisation. Comparatively, reduced graphene oxide-supported catalyst was more resistant to ripening and dealloying than its Ketjen Black analogue, and Pt–Ni alloy was more stable than Pt–Co. Overall, the results disentangle the roles of the carbon support and alloy composition and outline activity – stability trade-offs that guide the design of low-Pt loading cathodes for HT-PEMFCs.


  • Open Access

    Electrochemical signatures in proton exchange membrane fuel cells: A comprehensive study based on distribution of relaxation times

    by Francesco Mazzeo, Luca Di Napoli, Massimiliana Carello, Martin Prokop, Martin Paidar, Karel Bouzek


  • Mathematical Modeling Study of the Effect of Non-Uniform Pt Loading on Performance of Low Temperature PEM Fuel Cells

    by Miroslav Hala, Roman Kodým, Martin Prokop, Karel Bouzek

    An effective utilization of platinum catalysts is a key issue in optimizing the performance and cost-effectiveness of proton exchange membrane fuel cells (PEMFCs). An intentionally non-uniform platinum distribution (graded catalyst loading), either along the membrane plane (in-plane) or across the catalyst layer (through-plane), holds promise for improving both the performance and the durability [1, 2]. This strategy has gained attention in connection with advances in PEM FC electrodes manufacturing methods. One of the novel promising technique is an inkjet printing [3] enabling spatial control of catalyst placement over the membrane surface. Both experimental and modeling approaches have been employed to investigate the non-uniform platinum distribution in PEM FC electrode. Regarding the modeling, full 3D models accounting for in-/through-plane gradients remain limited, leaving aspects of this concept underexplored. In this work, we present a full 3D macrohomogeneous model of a single cell PEMFC with a 25 cm² active area. The model incorporates macrohomogeneous (volume-averaged) domains of bipolar plates with flow-field channels. This significantly lowers number of numerical grid elements and, consequently, computational complexity [4]. The model includes a detailed agglomerate catalyst layer formulation, multi-component gas transport (Stefan-Maxwell), two-phase flow, membrane hydration, and heat and charge transport to capture the key physicochemical processes. Various in-plane platinum gradient configurations were investigated while maintaining an average cathode loading of 0.2 mg Pt/cm². At the anode a uniform loading of 0.1 mg Pt/cm² was used. The effects of operational conditions and even lower Pt loadings (notably less than 0.2 mg Pt/cm²) on cathode were also explored. The simulations show that although the impact of Pt gradient on overall cell performance is relatively modest, it has a significant effect on the homogeneity of local current densities. In particular, reducing Pt loading near the inlet improves the current distribution uniformity, which is expected to support better durability. The model results were compared with experimental performance and accelerated stress test data determined for the PEM FC cell with inkjet-printed catalyst layers, showing reasonable agreement. This study further demonstrates the value of spatial optimization of Pt loading, not only for performance tuning but also for addressing durability through improved local current density distribution. The integration of detailed modeling with experimental data provides a platform for informed catalyst layer design. Acknowledgement This work was supported by the project "The Energy Conversion and Storage", funded as project No. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Comenius, call Excellent Research. References: Olivier Antoine; et al. Catalyst gradient for cathode active layer of proton exchange membrane fuel cell. Electrochimica Acta 2000 , 45 (27), 4493-4500. Marc Ayoub; et al. Review—Graded Catalyst Layers in Hydrogen Fuel Cells - A Pathway to Application-Tailored Cells. Journal of The Electrochemical Society 2024 , 171 (9), 094503. Mitra D.; et al. Direct deposition of catalyst layers on polymer electrolyte membrane (PEM) for fuel cells with controlled platinum distribution by inkjet printing. Journal of Power Sources 638 (2025) 236503. Monika Drakselová; et al. Three-dimensional macrohomogeneous mathematical model of an industrial-scale high-temperature PEM fuel cell stack. Electrochimica Acta 2018 , 273 , 432-446.

  • Characterisation of Proton-Exchange Membranes for Electrochemical Hydrogen Compression

    by Martin Prokop, Tomas Jedlicka, Jan Štrbík, Martin Paidar, Karel Bouzek

    Electrochemical hydrogen compression (EHC) is a progressive technology for end of pipe hydrogen compression and purification in one step. EHC is based on electrochemical hydrogen pump, where inlet hydrogen is oxidised on the anode to protons under deliberation of electrons, protons are transported to cathode, where, they are combined with electrons transported through external electrical circuit and hydrogen is formed at desired pressure. In contrast with state-of-the-art (mechanical) hydrogen compressors, EHC operates at moderate temperatures and contains no moving parts, improving the safety and energy efficiency due to the reduced entropic component of the compression process. EHC device utilises zero gap membrane-electrode assembly with electrodes separated by proton-exchange membrane (PEM). Anode gas-diffusion layer has to be made of rigid porous material able to mechanically support the membrane. Cathode gas-diffusion layer is made of carbon-based porous materials. Nanoparticulate Pt catalyst bonded with proton-conductive ionomer is localised between gas-diffusion layers and the membrane. This arrangement ensures facilitation of a three-phase boundary between Pt (connected to electron conductor), ionic conductor and hydrogen gas. State-of-the-art materials of membrane and ionomer are based on perfluorinated sulfonated polymers (PFSAs). While attaining an excellent chemical stability and conductivity, its production faces significant legislative and environmental challenges especially in EU. The possible solution is to use hydrocarbon-based membranes and ionomers. Given that electrode potentials around 0 V vs RHE and moderate operating temperatures are used in EHC cell, the stability of hydrocarbon PEMs should be sufficient, creating an interesting area of their application. One of the major issues of EHC process is its overall efficiency. This comprises two main components, the Faradaic efficiency and the Voltaic efficiency. The former is lowered by hydrogen crossover through the membrane and can be minimised by increasing the membrane thickness. The latter is impacted by cell Ohmic resistance of which membrane resistance represents the main contribution. Last but not least, mechanical stability of membrane under asymmetric cell pressures is essential for EHC durability. Due to these contradicting requirements of EHC technology on the membranes, hydrocarbon-based material has to be selected carefully. The goal of this study was to characterise experimental hydrocarbon membranes in terms of swelling and proton conductivity, compare them to commercial PFSA PEMs and test their properties in EHC single cell. Dimensional and weight changes due to membrane activation were observed with following determination of proton conductivity in flow cell, utilising both the liquid water and the humidified nitrogen as circulating media. Commercial membranes of Nafion product family (117, 212, 211, HP, XL) exhibited good proton conductivity under water and humidified nitrogen flows across temperature range of 30 to 90 °C. Fabrication method and presence of reinforcement had high impact on membrane properties. Membranes prepared by extrusion (Nafion 117, 212) tend to swell more than casted (Nafion 211). Reinforcement (Nafion HP, XL) has negative impact on membrane conductivity but, on the other hand, improves membrane dimensional and mechanical stability. Experimental hydrocarbon membranes based on chloromethylated polystyrene- block -poly(ethylene- ran -butylene)- block -polystyrene [1] functionalised with sulfonic groups exhibited reasonable dimensional stability and conductivity, but, in comparison with commercial PFSA PEMs, its properties were inferior. Membrane-electrode assemblies for EHC single cell consisted of catalyst-coated anode based on sintered titanium, membrane and catalyst-coated cathode based on carbon paper with microporous layer. Single cell was operated at ambient temperature with fully humidified hydrogen inlet and constant pressure (2 bar) of anode compartment and pressure of cathode compartment varying within the range of 3 to 30 bar. Stationary polarisation curves and electrochemical impedance spectra were recorded at various current densities and cathode compartment pressures. Overflows of hydrogen from backpressure valves on the anode and cathode side were recorded by mass flow meters and, together with electrochemical data, were used for calculation of Faradaic and Voltaic efficiencies, as well as for determination of hydrogen crossover through the studied membrane. Experiments performed confirmed the importance of balance between hydrogen crossover and electrical resistance of membrane. Experimental hydrocarbon membranes performed well in terms of hydrogen crossover, but their performance was limited by comparatively lower proton conductivity. In summary, these results support the applicability of hydrocarbon-based membrane in EHC cell. In the next stage, catalyst layer with hydrocarbon ionomer will be optimised and integrated into cell with hydrocarbon membrane. [1] 10.1016/j.eurpolymj.2019.109381 Project TS01030039/Advanced Hydrogen Compression Technology - Electrochemical Compression is co-financed with state support of Technology Agency of the Czech Republic within the framework of program THETA 2. This work was supported by the project "The Energy Conversion and Storage", funded as project No. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Comenius, call Excellent Research.

  • Open Access

    Advanced catalyst layers for PEM fuel cell produced by inkjet printing: Catalyst layer optimisation and comparison with ultrasonic-spray-coated one

    by T. Zubkova, K. Heinrich, M. Hala, M. Prokop, T. Jedlicka, K. Bouzek, A. Willert, R. Zichner


  • Open Access

    An innovative filler manipulation approach for low-cost composite coatings on metallic PEMFC bipolar plates

    by Katie McCay, Martin Prokop, Øyvind Alsos, Anita Hamar Reksten, Miroslav Hala, Jakub Ludvík, Nikita Thind, Marie-Audrey Raux, Christelle Denonville, Farhad Torkzad, et al.