DLDong Li

Dong Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dong Li has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shear size effect in recycled aggregate concrete beams: An experimental study on stirrups

    by Dong Li, Xin Lin, Baihui Huang, Jiangxing Zhang, Liu Jin, Xiuli Du

    The shear failure of recycled aggregate concrete (RAC) beams is governed by a pronounced size effect, yet how this phenomenon is quantitatively mitigated by stirrup ratio remains poorly understood. This study presents an experimental investigation into the coupled influence of stirrup ratio and structural size on the shear performance of 24 geometrically similar RAC beams, with heights ranging from 300 mm to 900 mm and stirrup ratios spanning 0% to 0.628%. The experimental results reveal a significant trade-off: while increasing beam height from 300 mm to 900 mm reduces nominal shear strength by 44% in the absence of stirrups, this size-induced degradation is dramatically suppressed to merely 17% at a stirrup ratio of 0.628%. The shear crack strength exhibits a similar size dependency that weakens with increasing stirrup confinement. To capture this interaction, a modified Size Effect Law is formulated by introducing stirrup ratio-dependent coefficients into the classical Bažant framework, and its accuracy is validated against independent experimental data. This work provides a quantitative framework linking shear size effect mitigation to stirrup ratio, addressing a critical gap in current design provisions for RAC structures.

  • Mesh mapping-based mesoscale modeling and shear performance analysis of recycled aggregate concrete beams

    by Dong Li, Xin Lin, Chenyang Zhang, Renbo Zhang, Liu Jin, Xiuli Du

    This article proposes a three-dimensional mesoscale modeling framework based on mesh mapping technology. Going beyond the traditional three-phase simplification, recycled aggregate is resolved into a multilayered “old natural aggregate—old interfacial transition zone (ITZ)—attached old mortar” system. By integrating random aggregate placement with automated rebar generation algorithms, efficient collaborative modeling of aggregates, mortars, multiple ITZs, and reinforcement is achieved within a uniform hexahedral background mesh. Material phases are automatically identified and assigned based on node-to-aggregate spatial inclusion criteria. The modeling process is highly efficient under typical mesh sizes, completing within seconds to tens of seconds. The framework is validated against four-point bending tests on beams without stirrups, followed by systematic parametric analyses on replacement ratio and mesocomponent properties. Results reveal that: first, ITZ properties—particularly the internal old ITZ (ITZ3)—are the dominant factor governing shear behavior. Second, strengthening the attached old mortar significantly enhances both load-bearing and deformation capacities, but the improvement saturates once its strength exceeds that of the new mortar. Third, the elastic modulus of natural aggregate exerts only marginal influence on macroscopic shear performance. The proposed method achieves a favorable balance among modeling efficiency, geometric fidelity, and reinforcement compatibility, offering an extensible and practical tool for mesoscale analysis of recycled aggregate concrete members.


  • Open Access

    Phase-Resolved Assessment of Helium-Ion-Induced Primary Damage in Nuclear-Facility Concrete Structures

    by Dong Li, Hanbo Li, Fengjuan Chen, Liu Jin

    Nuclear-facility concrete structures perform containment, radiation-shielding, and load-bearing functions under prolonged irradiation; however, phase-dependent damage in heterogeneous concrete cannot be adequately represented by a homogeneous-material approximation. This study investigated the effects of the aggregate, cement matrix, and interfacial transition zone (ITZ) on He-ion transport and primary damage. SRIM-2013 calculations were performed for 1–3 MeV He ions, and the phase-resolved displacements per atom (DPA) profiles were combined by volume-fraction weighting and compared with those of an equivalent homogeneous target. At 2 MeV and a reference fluence of 1.0 × 1016 ions·cm−2, the aggregate, cement matrix, and ITZ exhibited DPA peaks of 0.3572, 0.2526, and 0.2749 at depths of 6.0, 7.5, and 9.3 μm, respectively. Increasing the assumed ITZ effective density from 1.47 to 1.89 g·cm−3 reduced the mean projected range, DPA peak depth, and DPA peak magnitude by 22.2%, 22.9%, and 12.8%, respectively. At 2 MeV, the phase-weighted DPA index reached a peak of 0.2237 at 6.0 μm, whereas the homogeneous target produced a peak of 0.3020 at 6.6 μm. Relative to the phase-weighted result, the homogeneous-target DPA peak was 35.0% higher and its peak depth was 10.0% greater. Homogenization therefore altered the primary-damage distribution and obscured deeper phase-specific features. The proposed framework provides phase-dependent initial-damage parameters for multiscale assessment of irradiation-induced degradation in nuclear concrete structures; however, experimental calibration is required before the calculated DPA can be related to material-property degradation or structural performance.

  • Open Access

    Simulation of Thermal Response and Microstructural Degradation of C-S-H under Gamma Irradiation Thermal Effects

    by Chen Fengjuan, Changrui Shang, Dong Li, Liu Jin, Xiuli Du

    Gamma irradiation-induced thermal effect is the dominant mechanism governing concrete degradation in the deep biological shield of nuclear reactors, where the residual radiation field is primarily contributed by gamma rays. Calcium-silicate-hydrate (C-S-H), as the principal binding phase of cement-based materials, governs the macroscopic performance of concrete, and its nanoscale thermal transport behavior and thermally induced structural response are fundamental to understanding the radiation durability of concrete. However, existing studies on the thermal response of C-S-H have been conducted exclusively under uniform temperature fields, which cannot reproduce the intrinsic temperature gradient along the irradiation penetration direction and the differential migration of constituent species driven by it. In this work, a steady-state temperature gradient is established within a one-dimensional C-S-H nanochannel using non-equilibrium molecular dynamics (NEMD) simulations, achieving an atomistic-scale equivalent representation of gamma irradiation energy deposition. The results show that a highly linear temperature distribution is formed along the heat flux direction. The temperature gradient drives pronounced migration of interlayer water molecules, while Ca redistribute from skeletal coordination sites toward the interlayer region and defect sites, accompanied by a decline in the long-range structural ordering of the skeleton. The silicate skeleton maintains its structural integrity throughout the equivalent temperature rise, indicating that thermal degradation is dominated by atomic transport within the interlayer region. The NEMD-based equivalent simulation framework established in this work and the atomistic mechanisms of gamma irradiation-induced microscopic degradation of C-S-H revealed herein provide fundamental parameters and mechanistic support for multiscale durability assessment of concrete in nuclear engineering applications.

  • Open Access

    Effects of impact parameters on peak displacement similitude of shear-dominated RC beams under low-velocity impact

    by Liu Jin, Xiaowei Dong, Renbo Zhang, Dong Li, Xiuli Du

    Shear-dominated RC beams under low-velocity impact fail through a mechanism distinct from flexure-dominated beams. While peak displacement in flexure-dominated members is mainly governed by global bending deformation and plastic rotation, that in shear-dominated members is closely associated with size-dependent diagonal cracking, localized damage in the impact region, stirrup contribution, and degradation of the shear-transfer mechanism. Thus, their displacement scale effect cannot be treated as a direct extension of the flexure-dominated mechanism. This study investigates the effects of impact mass and velocity on peak displacement similitude of geometrically similar shear-dominated RC beams using a validated three-dimensional finite element model. Response localization, shear damage evolution, and material energy partition were examined under velocity-controlled, mass-controlled, and equal energy input paths. The results show that velocity and mass govern the scale effect through different shear-related mechanisms. Increasing velocity intensifies the early local contact response; however, excessive velocity confines more input energy to the impact region and limits its conversion into overall deformation. Accordingly, αw,max increases from 5.60 to 7.74 m/s but decreases at 9.19 m/s, as the local energy dissipation ratio rises from about 48.5% to 62%. Increasing mass mainly prolongs the loading duration and promotes post-cracking shear damage. Under equal impact energy, different mass-velocity combinations still produce distinct similitude; at μE = 0.96 and λ=4, αw,max increases from about 14.5% to 20.5% as the mass ratio increases from 0.43 to 1.04, but decreases at higher mass ratios. A peak displacement correction relationship incorporating velocity ratio and mass ratio is proposed for prototype prediction.

  • Study on the modeling method of three-dimensional mesoscopic numerical model of fiber-reinforced recycled aggregate concrete

    by Dong Li, Ziqian Wang, Renbo Zhang, Liu Jin, Xiuli Du

    To better study the mesoscopic mechanical behavior of fiber-reinforced recycled aggregate concrete, an efficient modeling method of a three-dimensional mesoscopic numerical model is proposed. For mesoscopic composition, based on the traditional concrete structure of “aggregate-ITZ-mortar,” recycled aggregate is further subdivided into “aggregate core-old ITZ-old mortar” to accurately characterize its heterogeneous nature. For random placement of aggregates and fibers, corresponding random placement methods are established according to their respective geometric characteristics. This ensures uniform and random distribution of aggregates and fibers in three-dimensional space. For mesh generation and property assignment of the concrete matrix, a mapping rule based on geometric inclusion relationships is established. It efficiently assigns complex mesoscopic component properties to homogeneous background mesh elements, solving the problem of property allocation for multiphase materials. Subsequently, a corresponding numerical model is established with reference to real specimens in physical tests, and a uniaxial compression simulation is carried out. It is found that under the same load conditions as physical tests, the failure mode and stress–strain curve of the numerical model established by this method are largely consistent with the actual situation. Finally, the influence of recycled aggregate replacement ratio on the compressive performance of specimens is studied through numerical simulation. The results show that with the increase of recycled aggregate replacement ratio, the compressive strength of specimens decreases continuously. After adding 1% steel fibers to the specimens, their strength and ductility increase compared with before, but the strength still decreases with the increase of recycled aggregate replacement ratio.

  • Open Access

    Scaling behavior and mechanism of shear-failure reinforced concrete beams under impact loading

    by Liu Jin, Xiaowei Dong, Renbo Zhang, Dong Li, Xiuli Du

    The scale effect of reinforced concrete (RC) beams under impact is critical for extrapolating prototype behavior from scaled tests; however, for shear-dominated members, the coupling between strain-rate sensitivity and geometric scaling remains inadequately characterized. This study develops and validates a high-fidelity finite element model in ABAQUS/Explicit to investigate the effects of the shear span-to-depth ratio a/h0 and geometric scale factor λ on the impact behavior of RC beams. The results show that decreasing a/h0 from 3.5 to 1.5 changes the governing mechanism from flexure-dominated to shear-dominated behavior, accompanied by a more direct load-transfer path and more localized shear damage within the shear span. For geometrically similar beams with a/h0 = 1.5, significant scale effects are observed: as λ increases from 1.0 to 3.0, the failure mode evolves from distributed multi-crack damage to a dominant diagonal shear crack, the normalized peak mid-span deflection and residual displacement increase by 24.8% and 26.1%, respectively, and the normalized peak impact force decreases by 36.9%. The scale effect is closely related to the non-uniform scaling of strain-rate magnitude and spatial distribution, which leads to a mismatch in dynamic strength between prototype and scaled beams. In addition, a peak displacement prediction formula considering the coupling of strain rate and shear span-to-depth ratio was proposed and validated. These findings provide support for evaluating the impact resistance of full-scale shear-failure RC beams based on scaled test results.