Roberta Montagno
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Roberta Montagno has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Federica Fernandez
Department of Architecture, University of Palermo, 90128 Palermo, Italy
4 shared publications - Roberta Basile
Istituto Euro-Mediterraneo di Scienza e Tecnologia, 90143 Palermo, Italy
3 shared publications - Federica Zagarella
Istituto Euro-Mediterraneo di Scienza e Tecnologia, 90143 Palermo, Italy
2 shared publications - Silvia Germinario
Department of Earth and Geoenvironmental Sciences, University of Bari Aldo Moro, 70125 Bari, Italy
2 shared publications - Anna Maria Lagou
Laboratory of Materials for Cultural Heritage and Modern Building, School of Architecture, Technical University of Crete, 73100 Chania, Greece
1 shared publication - Antonella Mamì
Department of Architecture, University of Palermo, 90128 Palermo, Italy
1 shared publication
Latest Publications
- Open Access
Nature-Based and Solar Façade Systems for a Net-Zero Built Environment: A Structured State-of-the-Art Review and Preliminary Comparative Assessment
Green building façades are increasingly recognized as a key strategy for decarbonizing the built environment, addressing climate change, urbanization, and the urban heat island effect. This paper investigates two main façade approaches: nature-based solutions (NBS), such as green façades and living walls, and Building-Integrated Solar Energy Systems (BI-SES), including photovoltaic, solar thermal, and hybrid BIPV/T systems. The building envelope is framed as an active interface for both energy efficiency and on-site renewable energy generation. Through a structured state-of-the-art review, the study compares these systems in terms of energy performance, environmental benefits, costs, maintenance, lifecycle implications, and adaptability across climatic contexts. Results show that NBS provide consistent benefits in thermal regulation and cooling-load reduction, while solar façades are strongly influenced by orientation, geometry, and urban shading. To complement the qualitative analysis, a preliminary energy–environmental assessment is conducted for three façade configurations (conventional wall, green façade, and combined green–PV façade) across three Italian climates (Milan, Rome, and Palermo). Results indicate that vegetation reduces heat losses and CO2 emissions, with further improvements in integrated systems. Overall, NBS and solar façades emerge as complementary strategies whose integration can enhance building performance and support the transition towards net-zero carbon environments.
Open AccessNature-Based and Solar Façade Systems for a Net-Zero Built Environment: A Structured State-of-the-Art Review and Preliminary Comparative Assessment
Green building façades are increasingly recognized as a key strategy for decarbonizing the built environment, addressing climate change, urbanization, and the urban heat island effect. This paper investigates two main façade approaches: nature-based solutions (NBS), such as green façades and living walls, and Building-Integrated Solar Energy Systems (BI-SES), including photovoltaic, solar thermal, and hybrid BIPV/T systems. The building envelope is framed as an active interface for both energy efficiency and on-site renewable energy generation. Through a structured state-of-the-art review, the study compares these systems in terms of energy performance, environmental benefits, costs, maintenance, lifecycle implications, and adaptability across climatic contexts. Results show that NBS provide consistent benefits in thermal regulation and cooling-load reduction, while solar façades are strongly influenced by orientation, geometry, and urban shading. To complement the qualitative analysis, a preliminary energy–environmental assessment is conducted for three façade configurations (conventional wall, green façade, and combined green–PV façade) across three Italian climates (Milan, Rome, and Palermo). Results indicate that vegetation reduces heat losses and CO2 emissions, with further improvements in integrated systems. Overall, NBS and solar façades emerge as complementary strategies whose integration can enhance building performance and support the transition towards net-zero carbon environments.
- Open Access
- 28 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (9) , 3695
Comparative Evaluation of Gypsum-Based Plasters with Pistachio Shells for Eco-Sustainable Building
Agri-food waste represents a serious problem that can be overcome by converting it into added-value material for the production of plasters for green building; in fact, it can be used as a reinforcement additive in the building material industry. In this study, the performance of gypsum-based plasters with pistachio shell additives was evaluated. Before being used as additives for gypsum-based plasters, pistachio shells were ground at three different grain sizes in order to verify how grain size influences the performance of the material. Tests were then carried out on all the produced mortars to evaluate their chemical and physical characteristics, and interesting results regarding the mechanical resistance of some of the produced materials were obtained. The results showed that the addition of pistachio shells improved mechanical performance in all cases and that the best mechanical performance and water absorption by capillarity were achieved with the 0.5–2 mm pistachio grain size, while the best thermal conductivity was achieved with the 2–4 mm grain size. Summarizing, the best results were obtained with a pistachio shell granulometry of 0.5–2 mm, sand, and a water/gypsum ratio of 0.86–0.74.
- 28 April 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (9) , 3695
Open AccessComparative Evaluation of Gypsum-Based Plasters with Pistachio Shells for Eco-Sustainable Building
Agri-food waste represents a serious problem that can be overcome by converting it into added-value material for the production of plasters for green building; in fact, it can be used as a reinforcement additive in the building material industry. In this study, the performance of gypsum-based plasters with pistachio shell additives was evaluated. Before being used as additives for gypsum-based plasters, pistachio shells were ground at three different grain sizes in order to verify how grain size influences the performance of the material. Tests were then carried out on all the produced mortars to evaluate their chemical and physical characteristics, and interesting results regarding the mechanical resistance of some of the produced materials were obtained. The results showed that the addition of pistachio shells improved mechanical performance in all cases and that the best mechanical performance and water absorption by capillarity were achieved with the 0.5–2 mm pistachio grain size, while the best thermal conductivity was achieved with the 2–4 mm grain size. Summarizing, the best results were obtained with a pistachio shell granulometry of 0.5–2 mm, sand, and a water/gypsum ratio of 0.86–0.74.
- Open Access
Experimental Procedures of Accelerated Aging and Evaluation of Effectiveness of Nanostructured Products for the Protection of Volterra (Italy) Panchina Stone
The aims of the research were to evaluate the effectiveness of the application of nanostructured products on Volterra calcarenite stone and to define the experimental conditions and procedures of accelerated aging tests, able to simulate different degradation on the studied lithotype. The work focused on methods of performing accelerated aging tests in order to simulate different effects of environmental decay involving stone used on a historical site. The rock samples were examined before and after three treatment types: cyclic salt spray chamber, cycles of freezing–thawing and cycles of thermal shock. After each artificial aging cycle, changes in appearance were noted and chemical and physical properties were measured so that the differences between untreated and treated samples could be compared. After applying nanostructured products on the sample surfaces, and assessing the effects of the accelerated aging, the protective performance of the coatings was evaluated using the contact angle test to evaluate the surface hygroscopicity. Moreover, scanning electron microscope (SEM-EDS) analysis was performed before and after each application of nanostructured coating to evaluate changes in the surface morphology. Results demonstrated that Panchina stone showed a high durability to the aging tests, and artificial degradation effects were not largely visible. The nanostructured products seem to be suitable for stone protection by virtue of their good compatibility and effectiveness.
Open AccessExperimental Procedures of Accelerated Aging and Evaluation of Effectiveness of Nanostructured Products for the Protection of Volterra (Italy) Panchina Stone
The aims of the research were to evaluate the effectiveness of the application of nanostructured products on Volterra calcarenite stone and to define the experimental conditions and procedures of accelerated aging tests, able to simulate different degradation on the studied lithotype. The work focused on methods of performing accelerated aging tests in order to simulate different effects of environmental decay involving stone used on a historical site. The rock samples were examined before and after three treatment types: cyclic salt spray chamber, cycles of freezing–thawing and cycles of thermal shock. After each artificial aging cycle, changes in appearance were noted and chemical and physical properties were measured so that the differences between untreated and treated samples could be compared. After applying nanostructured products on the sample surfaces, and assessing the effects of the accelerated aging, the protective performance of the coatings was evaluated using the contact angle test to evaluate the surface hygroscopicity. Moreover, scanning electron microscope (SEM-EDS) analysis was performed before and after each application of nanostructured coating to evaluate changes in the surface morphology. Results demonstrated that Panchina stone showed a high durability to the aging tests, and artificial degradation effects were not largely visible. The nanostructured products seem to be suitable for stone protection by virtue of their good compatibility and effectiveness.
- Open Access
Development of Eco-Friendly and Self-Cleaning Lime-Pozzolan Plasters for Bio-Construction and Cultural Heritage
Nowadays, the design and use of multi-functional mortars has increased significantly, with interesting applications in the green building and cultural heritage conservation sectors. A key point for a correct adoption of these innovative materials is their behavior along time and their resistance to the weathering. The objective of this project was to define the performance and durability of innovative mortars, in order to use them correctly and to avoid irreparable damage over time. For the development of this project, lime–metakaolin and hydraulic lime–metakaolin based mortars (hereinafter called A, B), as well as A and B with the addition of nano-TiO2 and perlite (hereinafter referred to as A+, B+), have been tested. The focus of the work was to carry out preliminary tests to evaluate the performance and durability characteristics of these mortars, verifying their behavior over time through exposure to artificial aging cycles, including thermal shock cycles in saline solution aerosols, freeze cycles in vapor aerosol, and aging by heat treatment at high temperatures. Before and after each artificial aging cycle, weight measurements, and macroscopic and microscopic observations were performed in order to evaluate possible structural changes. The characteristics of the mortars were assessed by determination of the apparent volume mass, mechanical properties, such as compressive and bending strength, water absorption, whereas their self-cleaning capacity was measured by methylene blue degradation test under UV and solar irradiation. The results obtained show degradation effects in the mortar samples due to aging after each test, and indicated that mortars with perlite and nano-TiO2 are the best-performing ones, both from the durability and energetic point of view, rendering them suitable for applications in the green building sector and the conservation of cultural heritage.
Open AccessDevelopment of Eco-Friendly and Self-Cleaning Lime-Pozzolan Plasters for Bio-Construction and Cultural Heritage
Nowadays, the design and use of multi-functional mortars has increased significantly, with interesting applications in the green building and cultural heritage conservation sectors. A key point for a correct adoption of these innovative materials is their behavior along time and their resistance to the weathering. The objective of this project was to define the performance and durability of innovative mortars, in order to use them correctly and to avoid irreparable damage over time. For the development of this project, lime–metakaolin and hydraulic lime–metakaolin based mortars (hereinafter called A, B), as well as A and B with the addition of nano-TiO2 and perlite (hereinafter referred to as A+, B+), have been tested. The focus of the work was to carry out preliminary tests to evaluate the performance and durability characteristics of these mortars, verifying their behavior over time through exposure to artificial aging cycles, including thermal shock cycles in saline solution aerosols, freeze cycles in vapor aerosol, and aging by heat treatment at high temperatures. Before and after each artificial aging cycle, weight measurements, and macroscopic and microscopic observations were performed in order to evaluate possible structural changes. The characteristics of the mortars were assessed by determination of the apparent volume mass, mechanical properties, such as compressive and bending strength, water absorption, whereas their self-cleaning capacity was measured by methylene blue degradation test under UV and solar irradiation. The results obtained show degradation effects in the mortar samples due to aging after each test, and indicated that mortars with perlite and nano-TiO2 are the best-performing ones, both from the durability and energetic point of view, rendering them suitable for applications in the green building sector and the conservation of cultural heritage.