Ze Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ze Zhang has a total of 107 co-authors. Here are the top co-authors by number of shared publications:
- Zhenyu Yang
Key Laboratory of Jiangxi Province for Environment and Energy Catalysis, School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, China
20 shared publications - Jianxin Cai
School of Chemistry and Chemical Engineering, Key Laboratory Foundation of Jiangxi Province for Environment and Energy Catalysis, Nanchang University, Nanchang 330031, China
11 shared publications Ji Yu
Key Laboratory of Jiangxi Province for Environment and Energy Catalysis, School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, China
9 shared publications- Ji Yu
School of Chemistry and Chemical Engineering, Nanchang University, Nanchang, Jiangxi 330031, P. R. China
8 shared publications Jia Li
School of Chemistry & Chemical Engineering, Nanchang University, Nanchang, Jiangxi 330031, P. R. China
6 shared publicationsShouyu Hong
School of Chemistry & Chemical Engineering, Nanchang University, Nanchang, Jiangxi 330031, P. R. China
5 shared publications
Latest Publications
- Open Access
- 24 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (30) , eaeg9860
MoCl 5 -mediated dual-track regulation unlocks high-voltage ether-based quasi-solid-state electrolytes
In situ–polymerized 1,3-dioxolane (DOL) electrolytes offer a promising route to quasi-solid-state lithium metal batteries (QSSLMBs), yet their limited oxidative tolerance and unstable electrode interfaces restrict high-voltage operation. Here, a simulation-guided dual-track regulation strategy uses MoCl 5 as a multifunctional initiator to couple DOL ring-opening polymerization with Li-salt dissociation and inorganic interphase construction. MoCl 5 promotes formation of a high-molecular-weight poly(1,3-dioxolane) (PDOL) matrix and LiF/LiCl/Li x Mo y -enriched solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), improving bulk stability, Li + transport, and interfacial robustness. The resulting MoCl 5 -regulated PDOL electrolyte achieves a Li + transference number of 0.71 and an electrochemical stability window of 4.7 V. Li||Li symmetric cells cycle for over 1000 hours at 5 mA cm −2 , while high-voltage Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cells retain over 95% capacity after 50 cycles at 2 C. This work establishes a design principle for multifunctional initiators and unlocks the high-voltage potential of ether-based electrolytes, advancing the practical application of QSSLMBs.
- 24 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (30) , eaeg9860
Open AccessMoCl 5 -mediated dual-track regulation unlocks high-voltage ether-based quasi-solid-state electrolytes
In situ–polymerized 1,3-dioxolane (DOL) electrolytes offer a promising route to quasi-solid-state lithium metal batteries (QSSLMBs), yet their limited oxidative tolerance and unstable electrode interfaces restrict high-voltage operation. Here, a simulation-guided dual-track regulation strategy uses MoCl 5 as a multifunctional initiator to couple DOL ring-opening polymerization with Li-salt dissociation and inorganic interphase construction. MoCl 5 promotes formation of a high-molecular-weight poly(1,3-dioxolane) (PDOL) matrix and LiF/LiCl/Li x Mo y -enriched solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI), improving bulk stability, Li + transport, and interfacial robustness. The resulting MoCl 5 -regulated PDOL electrolyte achieves a Li + transference number of 0.71 and an electrochemical stability window of 4.7 V. Li||Li symmetric cells cycle for over 1000 hours at 5 mA cm −2 , while high-voltage Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cells retain over 95% capacity after 50 cycles at 2 C. This work establishes a design principle for multifunctional initiators and unlocks the high-voltage potential of ether-based electrolytes, advancing the practical application of QSSLMBs.
- Open Access
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (28) , 14041-14053
Electronic structure engineering of Zn-based catalysts via anionic regulation for polysulfide adsorption–catalysis in Li–S batteries
Sluggish sulfur redox kinetics and polysulfide shuttling significantly compromise the cycling stability and sulfur utilization of lithium–sulfur batteries (LSBs). Efficient catalytic conversion of polysulfides is a pivotal strategy to address these issues, yet remains challenged by ambiguous electronic structure–performance relationships and limited catalytic efficacy. We rationally designed zinc-based compounds encapsulated in N-doped porous carbon (ZnX@PC, X = O/S/Se) to modulate the orbital electronic structure of zinc centers, serving as catalysts for accelerating sulfur redox kinetics and suppressing polysulfide migration in LSBs. The battery performance with these zinc-based catalysts was systematically evaluated, with a particular focus on how p-band characteristics of anions (O/S/Se) govern d–p orbital hybridization between Zn center and S in polysulfides. Compared to O and S, the Se anion optimizes the Zn d-band center closer to the Fermi level in ZnSe compounds. The ZnSe@PC catalyst exhibits balanced polysulfide adsorption and the most favorable d-band proximity to the Fermi level, demonstrating optimal adsorption–catalysis synergy for polysulfides. Electrochemical testing revealed an initial specific capacity of 1526 mAh g−1 at 0.1C for ZnSe@PC-based cells, confirming high sulfur utilization efficiency. Under challenging conditions (E/S ratio = 4.0 µL mg−1, sulfur loading = 7.0 mg cm−2), the pouch cell system delivered an exceptional capacity of 953.3 mAh g−1 at 0.1C, representing one of the best performances reported for high loading sulfur cathodes. Consequently, this work deepens the mechanistic understanding of LSBs and offers empirical validation for the conventional theory regarding the influence of the d-band center on battery performance.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (28) , 14041-14053
Open AccessElectronic structure engineering of Zn-based catalysts via anionic regulation for polysulfide adsorption–catalysis in Li–S batteries
Sluggish sulfur redox kinetics and polysulfide shuttling significantly compromise the cycling stability and sulfur utilization of lithium–sulfur batteries (LSBs). Efficient catalytic conversion of polysulfides is a pivotal strategy to address these issues, yet remains challenged by ambiguous electronic structure–performance relationships and limited catalytic efficacy. We rationally designed zinc-based compounds encapsulated in N-doped porous carbon (ZnX@PC, X = O/S/Se) to modulate the orbital electronic structure of zinc centers, serving as catalysts for accelerating sulfur redox kinetics and suppressing polysulfide migration in LSBs. The battery performance with these zinc-based catalysts was systematically evaluated, with a particular focus on how p-band characteristics of anions (O/S/Se) govern d–p orbital hybridization between Zn center and S in polysulfides. Compared to O and S, the Se anion optimizes the Zn d-band center closer to the Fermi level in ZnSe compounds. The ZnSe@PC catalyst exhibits balanced polysulfide adsorption and the most favorable d-band proximity to the Fermi level, demonstrating optimal adsorption–catalysis synergy for polysulfides. Electrochemical testing revealed an initial specific capacity of 1526 mAh g−1 at 0.1C for ZnSe@PC-based cells, confirming high sulfur utilization efficiency. Under challenging conditions (E/S ratio = 4.0 µL mg−1, sulfur loading = 7.0 mg cm−2), the pouch cell system delivered an exceptional capacity of 953.3 mAh g−1 at 0.1C, representing one of the best performances reported for high loading sulfur cathodes. Consequently, this work deepens the mechanistic understanding of LSBs and offers empirical validation for the conventional theory regarding the influence of the d-band center on battery performance.
- Open Access
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
BMIM-SCN-Mediated Bulk-Interface Co-Tuning of Composite Electrolytes Enables Dendrite-Free Solid-State Li-S Batteries
The global transition to sustainable energy demands energy storage systems balancing ultrahigh energy density, intrinsic safety, and long cycle life. Lithium-sulfur (Li-S) batteries, with a theoretical energy density of 2600 Wh kg-1, represent a transformative alternative to lithium-ion batteries, yet their commercialization is constrained by polysulfide shuttling, poor solid-solid interfacial compatibility, and lithium dendrite growth. Herein, we report a 1-butyl-3-methylimidazolium thiocyanate (BMIM-SCN)-mediated bulk-interface co-tuning strategy for poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/F127-based composite solid-state electrolytes (CSEs), addressing these challenges via a four-fold synergistic effect. This tuning modulates polymer crystallinity, promotes lithium salt dissociation, optimizes interfacial wettability, and induces a stable solid electrolyte interphase (SEI). The resultant CSE-BS exhibits a room-temperature ionic conductivity of 1.20 × 10-3 S cm-1, Li+ transference number of 0.70, tensile strength of 33.4 MPa, and electrochemical stability window >4.78 V. Integrated into all-solid-state Li-S batteries, CSE-BS delivers an initial discharge capacity of 1499 mAh g-1 at 0.1C, retains average capacity 840 mAh g-1 after 200 cycles at 0.2C (0.13% per-cycle decay), and maintains average capacity 667 mAh g-1 after 200 cycles at 1C. Mechanistic studies confirm BMIM-SCN induces a low-crystallinity (8.9%) polymer bulk and a LiF-rich SEI, collectively suppressing dendrite growth and stabilizing the electrode-electrolyte interface. This work establishes a scalable bulk-interface co-optimization strategy for CSEs, advancing practical high-energy solid-state Li-S batteries and empowering next-generation energy storage technologies.
- 28 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessBMIM-SCN-Mediated Bulk-Interface Co-Tuning of Composite Electrolytes Enables Dendrite-Free Solid-State Li-S Batteries
The global transition to sustainable energy demands energy storage systems balancing ultrahigh energy density, intrinsic safety, and long cycle life. Lithium-sulfur (Li-S) batteries, with a theoretical energy density of 2600 Wh kg-1, represent a transformative alternative to lithium-ion batteries, yet their commercialization is constrained by polysulfide shuttling, poor solid-solid interfacial compatibility, and lithium dendrite growth. Herein, we report a 1-butyl-3-methylimidazolium thiocyanate (BMIM-SCN)-mediated bulk-interface co-tuning strategy for poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/F127-based composite solid-state electrolytes (CSEs), addressing these challenges via a four-fold synergistic effect. This tuning modulates polymer crystallinity, promotes lithium salt dissociation, optimizes interfacial wettability, and induces a stable solid electrolyte interphase (SEI). The resultant CSE-BS exhibits a room-temperature ionic conductivity of 1.20 × 10-3 S cm-1, Li+ transference number of 0.70, tensile strength of 33.4 MPa, and electrochemical stability window >4.78 V. Integrated into all-solid-state Li-S batteries, CSE-BS delivers an initial discharge capacity of 1499 mAh g-1 at 0.1C, retains average capacity 840 mAh g-1 after 200 cycles at 0.2C (0.13% per-cycle decay), and maintains average capacity 667 mAh g-1 after 200 cycles at 1C. Mechanistic studies confirm BMIM-SCN induces a low-crystallinity (8.9%) polymer bulk and a LiF-rich SEI, collectively suppressing dendrite growth and stabilizing the electrode-electrolyte interface. This work establishes a scalable bulk-interface co-optimization strategy for CSEs, advancing practical high-energy solid-state Li-S batteries and empowering next-generation energy storage technologies.
- Open Access
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
BMIM-SCN-Mediated Bulk-Interface Co-Tuning of Composite Electrolytes Enables Dendrite-Free Solid-State Li-S Batteries
The global transition to sustainable energy demands energy storage systems balancing ultrahigh energy density, intrinsic safety, and long cycle life. Lithium-sulfur (Li-S) batteries, with a theoretical energy density of 2600 Wh kg-1, represent a transformative alternative to lithium-ion batteries, yet their commercialization is constrained by polysulfide shuttling, poor solid-solid interfacial compatibility, and lithium dendrite growth. Herein, we report a 1-butyl-3-methylimidazolium thiocyanate (BMIM-SCN)-mediated bulk-interface co-tuning strategy for poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/F127-based composite solid-state electrolytes (CSEs), addressing these challenges via a four-fold synergistic effect. This tuning modulates polymer crystallinity, promotes lithium salt dissociation, optimizes interfacial wettability, and induces a stable solid electrolyte interphase (SEI). The resultant CSE-BS exhibits a room-temperature ionic conductivity of 1.20 × 10-3 S cm-1, Li+ transference number of 0.70, tensile strength of 33.4 MPa, and electrochemical stability window >4.78 V. Integrated into all-solid-state Li-S batteries, CSE-BS delivers an initial discharge capacity of 1499 mAh g-1 at 0.1C, retains average capacity 840 mAh g-1 after 200 cycles at 0.2C (0.13% per-cycle decay), and maintains average capacity 667 mAh g-1 after 200 cycles at 1C. Mechanistic studies confirm BMIM-SCN induces a low-crystallinity (8.9%) polymer bulk and a LiF-rich SEI, collectively suppressing dendrite growth and stabilizing the electrode-electrolyte interface. This work establishes a scalable bulk-interface co-optimization strategy for CSEs, advancing practical high-energy solid-state Li-S batteries and empowering next-generation energy storage technologies.
- 27 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessBMIM-SCN-Mediated Bulk-Interface Co-Tuning of Composite Electrolytes Enables Dendrite-Free Solid-State Li-S Batteries
The global transition to sustainable energy demands energy storage systems balancing ultrahigh energy density, intrinsic safety, and long cycle life. Lithium-sulfur (Li-S) batteries, with a theoretical energy density of 2600 Wh kg-1, represent a transformative alternative to lithium-ion batteries, yet their commercialization is constrained by polysulfide shuttling, poor solid-solid interfacial compatibility, and lithium dendrite growth. Herein, we report a 1-butyl-3-methylimidazolium thiocyanate (BMIM-SCN)-mediated bulk-interface co-tuning strategy for poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/F127-based composite solid-state electrolytes (CSEs), addressing these challenges via a four-fold synergistic effect. This tuning modulates polymer crystallinity, promotes lithium salt dissociation, optimizes interfacial wettability, and induces a stable solid electrolyte interphase (SEI). The resultant CSE-BS exhibits a room-temperature ionic conductivity of 1.20 × 10-3 S cm-1, Li+ transference number of 0.70, tensile strength of 33.4 MPa, and electrochemical stability window >4.78 V. Integrated into all-solid-state Li-S batteries, CSE-BS delivers an initial discharge capacity of 1499 mAh g-1 at 0.1C, retains average capacity 840 mAh g-1 after 200 cycles at 0.2C (0.13% per-cycle decay), and maintains average capacity 667 mAh g-1 after 200 cycles at 1C. Mechanistic studies confirm BMIM-SCN induces a low-crystallinity (8.9%) polymer bulk and a LiF-rich SEI, collectively suppressing dendrite growth and stabilizing the electrode-electrolyte interface. This work establishes a scalable bulk-interface co-optimization strategy for CSEs, advancing practical high-energy solid-state Li-S batteries and empowering next-generation energy storage technologies.
- Open Access
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Interconnected 3D nanostructures derived from MoS2 nanoflowers as anode material for high-rate performance Li-ion batteries
MoS2 is a promising anode material for Li-ion batteries, but has disadvantages such as limited electrical conductivity and substantial volume expansion during cycling. To address these issues, this work synthesized a composite MoS2@C@CNFs with peculiar structure. MoS2@C nanoflowers were inserted into N-doped carbon nanofibers. The radially aligned distribution of MoS2 nanoflowers in N-doped carbon nanofibers shortens Li-ion diffusion pathways during charging and discharging processes. Additionally, the nanoflower morphology provides abundant electroactive sites. Concurrently, the N-doped carbon nanofibers form a highly conductive framework, improving capacitive lithium storage behavior. This synergistic design has outstanding cycling stability, retaining a reversible discharge capacity of 444.0 mA h g−1 after 200 cycles at a high current density of 1.0 A g−1. This study provides a new insight into enhancing the lithium storage capability of MoS2 anode material at high current densities.
- 18 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterconnected 3D nanostructures derived from MoS2 nanoflowers as anode material for high-rate performance Li-ion batteries
MoS2 is a promising anode material for Li-ion batteries, but has disadvantages such as limited electrical conductivity and substantial volume expansion during cycling. To address these issues, this work synthesized a composite MoS2@C@CNFs with peculiar structure. MoS2@C nanoflowers were inserted into N-doped carbon nanofibers. The radially aligned distribution of MoS2 nanoflowers in N-doped carbon nanofibers shortens Li-ion diffusion pathways during charging and discharging processes. Additionally, the nanoflower morphology provides abundant electroactive sites. Concurrently, the N-doped carbon nanofibers form a highly conductive framework, improving capacitive lithium storage behavior. This synergistic design has outstanding cycling stability, retaining a reversible discharge capacity of 444.0 mA h g−1 after 200 cycles at a high current density of 1.0 A g−1. This study provides a new insight into enhancing the lithium storage capability of MoS2 anode material at high current densities.
- Open Access
- 22 February 2026
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (5) , e70282
RuO 2 ‐Based High‐Entropy Oxide and Its Asymmetric Catalysis on Polysulfide Conversion in Lithium–Sulfur Batteries
High‐entropy oxides with five or more metal components in a single oxide phase, hold attractive potential to enhance the lithium polysulfides adsorption–catalysis ability in Li‐S batteries due to the noteworthy synergistic effect of the multiple metal sites. Herein, we have synthesized an RuO 2 ‐based high‐entropy oxide, that is, (RuIrFeCoNi)O 2 via a simple molten salt method for Li‐S batteries. Our results prove that the introduction of multiple metal components endows high‐entropy oxide with moderate adsorption of lithium polysulfides and promising bidirectional catalysis on the liquid–solid conversion between soluble lithium polysulfides and insoluble Li 2 S. Particularly, compared with the quaternary (RuFeCoNi)O 2 catalyst, the inferior kinetics enhancement of the lithium polysulfides generation, but the superior promotion of Li 2 S deposition for high‐entropy oxide greatly favors the inhibition of shuttle effect. Such an asymmetric catalysis behavior induces remarkable electrochemical performance of Li‐S batteries assembled with high‐entropy oxide‐modified separator. High specific capacities of 1641.1 mAh g −1 at 0.1 C and 812.5 mAh g −1 at 2 C are achieved. Remarkably, superior cycle stability is realized with a low capacity decay rate of only 0.060% per cycle within 1000 cycles at 1 C rate. This study unveils the catalytic mechanism of high‐entropy oxide in promoting polysulfide conversion and offers a robust foundation for designing efficient catalysts for Li‐S batteries.
- 22 February 2026
- Published by Wiley in Energy & Environmental Materials
- Vol. 9 (5) , e70282
Open AccessRuO 2 ‐Based High‐Entropy Oxide and Its Asymmetric Catalysis on Polysulfide Conversion in Lithium–Sulfur Batteries
High‐entropy oxides with five or more metal components in a single oxide phase, hold attractive potential to enhance the lithium polysulfides adsorption–catalysis ability in Li‐S batteries due to the noteworthy synergistic effect of the multiple metal sites. Herein, we have synthesized an RuO 2 ‐based high‐entropy oxide, that is, (RuIrFeCoNi)O 2 via a simple molten salt method for Li‐S batteries. Our results prove that the introduction of multiple metal components endows high‐entropy oxide with moderate adsorption of lithium polysulfides and promising bidirectional catalysis on the liquid–solid conversion between soluble lithium polysulfides and insoluble Li 2 S. Particularly, compared with the quaternary (RuFeCoNi)O 2 catalyst, the inferior kinetics enhancement of the lithium polysulfides generation, but the superior promotion of Li 2 S deposition for high‐entropy oxide greatly favors the inhibition of shuttle effect. Such an asymmetric catalysis behavior induces remarkable electrochemical performance of Li‐S batteries assembled with high‐entropy oxide‐modified separator. High specific capacities of 1641.1 mAh g −1 at 0.1 C and 812.5 mAh g −1 at 2 C are achieved. Remarkably, superior cycle stability is realized with a low capacity decay rate of only 0.060% per cycle within 1000 cycles at 1 C rate. This study unveils the catalytic mechanism of high‐entropy oxide in promoting polysulfide conversion and offers a robust foundation for designing efficient catalysts for Li‐S batteries.
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Unlocking the Potential of Lithium–Sulfur Batteries with Hollow ZnS–SnO 2 Cubic Heterostructures
The commercialization of lithium-sulfur (Li-S) batteries is hindered by challenges such as the polysulfide shuttle effect, sluggish conversion kinetics, and loss of active materials. Regarding the above issues, through a precisely controlled coprecipitation-hydrothermal-thermal treatment synthesis strategy, this study reports the first successful construction of ZnS-SnO2 (ZSSO) heterojunction cubes with well-defined porous surfaces and internal hollow structures, which were specifically employed as sulfur host materials. This structure not only integrates the advantages of the individual components but also generates a synergistic enhancement effect through the interfacial built-in electric field. Both theoretical calculations and operando spectroscopic analyses confirm that the heterointerface significantly outperforms every single component in mediating polysulfide conversion, achieving clear cooperative effects. By combining systematic operando characterizations with first-principles calculations, we establish a complete evidence chain linking microscopic electronic structures to macroscopic electrochemical behaviors, offering deep insights and theoretical guidance for the rational design of heterostructure materials. Based on this innovative design, the S@ZSSO cathode exhibits breakthroughs in key electrochemical performance metrics compared with relevant literature reports from the past year, especially in high-rate capability and cycling stability, highlighting its strong potential for practical applications. Experimental results show that the S@ZSSO cathode delivers an initial discharge capacity of 1343.7 mAh g-1 at 0.1C and maintains 603.9 mAh g-1 even at a high rate of 5C. It also demonstrates outstanding cycling stability, retaining 405.8 mAh g-1 after 800 cycles at 0.5C with an extremely low-capacity decay of only 0.063% per cycle. This work provides a simple yet effective host-material design strategy for high-performance Li-S batteries.
- 22 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Unlocking the Potential of Lithium–Sulfur Batteries with Hollow ZnS–SnO 2 Cubic Heterostructures
The commercialization of lithium-sulfur (Li-S) batteries is hindered by challenges such as the polysulfide shuttle effect, sluggish conversion kinetics, and loss of active materials. Regarding the above issues, through a precisely controlled coprecipitation-hydrothermal-thermal treatment synthesis strategy, this study reports the first successful construction of ZnS-SnO2 (ZSSO) heterojunction cubes with well-defined porous surfaces and internal hollow structures, which were specifically employed as sulfur host materials. This structure not only integrates the advantages of the individual components but also generates a synergistic enhancement effect through the interfacial built-in electric field. Both theoretical calculations and operando spectroscopic analyses confirm that the heterointerface significantly outperforms every single component in mediating polysulfide conversion, achieving clear cooperative effects. By combining systematic operando characterizations with first-principles calculations, we establish a complete evidence chain linking microscopic electronic structures to macroscopic electrochemical behaviors, offering deep insights and theoretical guidance for the rational design of heterostructure materials. Based on this innovative design, the S@ZSSO cathode exhibits breakthroughs in key electrochemical performance metrics compared with relevant literature reports from the past year, especially in high-rate capability and cycling stability, highlighting its strong potential for practical applications. Experimental results show that the S@ZSSO cathode delivers an initial discharge capacity of 1343.7 mAh g-1 at 0.1C and maintains 603.9 mAh g-1 even at a high rate of 5C. It also demonstrates outstanding cycling stability, retaining 405.8 mAh g-1 after 800 cycles at 0.5C with an extremely low-capacity decay of only 0.063% per cycle. This work provides a simple yet effective host-material design strategy for high-performance Li-S batteries.
- Open Access
- 23 October 2025
- Published by Wiley
RuO2-Based High-Entropy Oxide and Its Asymmetric Catalysis on Polysulfide Conversion in Lithium-Sulfur Batteries
High-entropy oxides (HEOs) with five or more metal components in a single oxide phase, hold attractive potential to enhance the lithium polysulfides (LiPSs) adsorption-catalysis ability in Li-S batteries due to the noteworthy synergistic effect of the multiple metal sites. Herein, we have synthesized a RuO 2 -based HEO, i.e. (RuIrFeCoNi)O 2 via a simple molten salt method for Li-S batteries. Our results prove that the introduction of multiple metal components endows HEO with moderate adsorption of LiPSs and promising bidirectional catalysis on the liquid-solid conversion between soluble LiPSs and insoluble Li 2 S. Particularly, compared with the quaternary (RuFeCoNi)O 2 catalyst, the inferior kinetics enhancement of the LiPSs generation, but the superior promotion of Li 2 S deposition for HEO greatly favors the inhibition of shuttle effect. Such an asymmetric catalysis behavior induces remarkable electrochemical performance of Li-S batteries assembled with HEO-modified separator. High specific capacities of 1641.1 mAh g -1 at 0.1 C and 812.5 mAh g -1 at 2 C are achieved. Remarkably, superior cycle stability is realized with a low capacity decay rate of only 0.060% per cycle within 1000 cycles at 1 C rate. This study unveils the catalytic mechanism of HEO in promoting polysulfide conversion and offers a robust foundation for designing efficient catalysts for Li-S batteries.
- 23 October 2025
- Published by Wiley
Open AccessRuO2-Based High-Entropy Oxide and Its Asymmetric Catalysis on Polysulfide Conversion in Lithium-Sulfur Batteries
High-entropy oxides (HEOs) with five or more metal components in a single oxide phase, hold attractive potential to enhance the lithium polysulfides (LiPSs) adsorption-catalysis ability in Li-S batteries due to the noteworthy synergistic effect of the multiple metal sites. Herein, we have synthesized a RuO 2 -based HEO, i.e. (RuIrFeCoNi)O 2 via a simple molten salt method for Li-S batteries. Our results prove that the introduction of multiple metal components endows HEO with moderate adsorption of LiPSs and promising bidirectional catalysis on the liquid-solid conversion between soluble LiPSs and insoluble Li 2 S. Particularly, compared with the quaternary (RuFeCoNi)O 2 catalyst, the inferior kinetics enhancement of the LiPSs generation, but the superior promotion of Li 2 S deposition for HEO greatly favors the inhibition of shuttle effect. Such an asymmetric catalysis behavior induces remarkable electrochemical performance of Li-S batteries assembled with HEO-modified separator. High specific capacities of 1641.1 mAh g -1 at 0.1 C and 812.5 mAh g -1 at 2 C are achieved. Remarkably, superior cycle stability is realized with a low capacity decay rate of only 0.060% per cycle within 1000 cycles at 1 C rate. This study unveils the catalytic mechanism of HEO in promoting polysulfide conversion and offers a robust foundation for designing efficient catalysts for Li-S batteries.
- 12 April 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (15) , 9989-9999
Innovative Separator Engineering: Hydrogen Bond-Driven Layer-By-Layer Assembly for Enhanced Stability and Efficiency in Lithium Metal Batteries
Lithium metal batteries (LMBs) face critical challenges due to uncontrolled lithium dendrite growth and inhomogeneous Li+ flux, largely attributed to conventional separators' poor interfacial compatibility. To address this, we propose a hydrogen bond-driven layer-by-layer (LbL) assembly strategy for engineering functional separators using poly(vinyl alcohol) (PVA) and tannic acid (TA). The optimized PP/(TA/PVA)15 separator leverages the synergistic interplay between PVA's hydroxyl groups and TA's carbonyl moieties, forming a robust hydrogen-bonded network that simultaneously enhances lithiophilicity, regulates Li+ flux uniformity, and immobilizes anions. The interfacial design achieves exceptional electrochemical performance: Li//Li symmetric cells maintain stable operation for 800 h at 0.5 mA cm-2/0.5 mAh cm-2, while Li//LiFePO4 half cells retain 73.8% capacity after 1000 cycles at 5C (decay rate: 0.026% per cycle). The separator further exhibits high ionic conductivity (0.94 mS cm-1) and Li+ transference number (0.63), outperforming conventional polyolefin counterparts. By integrating simplicity, scalability, and eco-friendliness, this work pioneers a universal interface chemistry paradigm for next-generation LMBs, offering transformative insights into separator engineering through molecular-level hydrogen-bonding control.
- 12 April 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (15) , 9989-9999
Innovative Separator Engineering: Hydrogen Bond-Driven Layer-By-Layer Assembly for Enhanced Stability and Efficiency in Lithium Metal Batteries
Lithium metal batteries (LMBs) face critical challenges due to uncontrolled lithium dendrite growth and inhomogeneous Li+ flux, largely attributed to conventional separators' poor interfacial compatibility. To address this, we propose a hydrogen bond-driven layer-by-layer (LbL) assembly strategy for engineering functional separators using poly(vinyl alcohol) (PVA) and tannic acid (TA). The optimized PP/(TA/PVA)15 separator leverages the synergistic interplay between PVA's hydroxyl groups and TA's carbonyl moieties, forming a robust hydrogen-bonded network that simultaneously enhances lithiophilicity, regulates Li+ flux uniformity, and immobilizes anions. The interfacial design achieves exceptional electrochemical performance: Li//Li symmetric cells maintain stable operation for 800 h at 0.5 mA cm-2/0.5 mAh cm-2, while Li//LiFePO4 half cells retain 73.8% capacity after 1000 cycles at 5C (decay rate: 0.026% per cycle). The separator further exhibits high ionic conductivity (0.94 mS cm-1) and Li+ transference number (0.63), outperforming conventional polyolefin counterparts. By integrating simplicity, scalability, and eco-friendliness, this work pioneers a universal interface chemistry paradigm for next-generation LMBs, offering transformative insights into separator engineering through molecular-level hydrogen-bonding control.
- 4 July 2024
- Published by Springer Nature in Science China Materials
- Vol. 67 (9) , 2880-2888
An organometallic salt as the electrolyte additive to regulate lithium polysulfide redox and stabilize lithium anodes for robust lithium-sulfur batteries
- 4 July 2024
- Published by Springer Nature in Science China Materials
- Vol. 67 (9) , 2880-2888
An organometallic salt as the electrolyte additive to regulate lithium polysulfide redox and stabilize lithium anodes for robust lithium-sulfur batteries