Shih-Meng Hsu
Research Subjects
Shih-Meng Hsu has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Hung-Chieh Lo
Geotechnical Engineering Research Center, Sinotech Engineering Consultants, Inc., Taipei, Taiwan
5 shared publications - Cheng-Yu Ku
Department of Harbor and River Engineering, National Taiwan Ocean University, Keelung, Taiwan
4 shared publications - Po-Yi Chou
Geotechnical Engineering Research Center, Sinotech Engineering Consultants, Inc., Taipei City, Taiwan
3 shared publications - Su-Yun Chi
Research Engineer, Geotechnical engineering Research Center, Sinotech Engineering Consultants, Inc., Basement No. 7, Lane 26, Yat-Sen Road, Taipei City 110, Taiwan
3 shared publications H. Y. Wen
Geotechnical Engineering Research Center, Sinotech Engineering Consultants, Inc., Taipei, Taiwan
2 shared publications- Po-Jui Chen
Geotechnical Engineering Research Center, Sinotech Engineering Consultants, Inc., 280, Xinhu 2nd Rd., Neihu Dist., Taipei 11494, Taiwan
2 shared publications
Latest Publications
- 4 January 2014
- Published by Springer Nature in Acta Geophysica
- Vol. 62 (3) , 564-584
Fractured-bedrock aquifer studies based on a descriptive statistics of well-logging data: A case study from the Dajia River basin, Taiwan
- 4 January 2014
- Published by Springer Nature in Acta Geophysica
- Vol. 62 (3) , 564-584
Fractured-bedrock aquifer studies based on a descriptive statistics of well-logging data: A case study from the Dajia River basin, Taiwan
- Open Access
- 18 June 2012
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 12 (6) , 1949-1960
Using an integrated method to estimate watershed sediment yield during heavy rain period: a case study in Hualien County, Taiwan
A comprehensive approach estimating sediment yield from a watershed is needed to develop better measures for mitigating sediment disasters and assessing downstream impacts. In the present study, an attempt has been made to develop an integrated method, considering sediment supplies associated with soil erosion, shallow landslide and debris flow to estimate sediment yield from a debris-flow-prone watershed on a storm event basis. The integrated method is based on the HSPF and TRIGRS models for predicting soil erosion and shallow landslide sediment yield, and the FLO-2D model for calculating debris flow sediment yield. The proposed method was applied to potential debris-flow watersheds located in the Sioulin Township of Hualien County. The available data such as hourly rainfall data, historical streamflow and sediment records as well as event-based landslide inventory maps have been used for model calibration and validation. Results for simulating sediment yield have been confirmed by comparisons of observed data from several typhoon events. The verified method employed a 24-h design hyetograph with the 100-yr return period to simulate sediment yield within the study area. The results revealed that the influence of shallow landslides on sediment supply as compared with soil erosion was significant. The estimate of landslide transport capacity into a main channel indicated the sediment delivery ratio on a typhoon event basis was approximately 38.4%. In addition, a comparison of sediment yields computed from occurrence and non-occurrence of debris flow scenarios showed that the sediment yield from an occurrence condition was found to be increasing at about 14.2 times more than estimated under a non-occurrence condition. This implied watershed sediment hazard induced by debris flow may cause severe consequences.
- 18 June 2012
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 12 (6) , 1949-1960
Open AccessUsing an integrated method to estimate watershed sediment yield during heavy rain period: a case study in Hualien County, Taiwan
A comprehensive approach estimating sediment yield from a watershed is needed to develop better measures for mitigating sediment disasters and assessing downstream impacts. In the present study, an attempt has been made to develop an integrated method, considering sediment supplies associated with soil erosion, shallow landslide and debris flow to estimate sediment yield from a debris-flow-prone watershed on a storm event basis. The integrated method is based on the HSPF and TRIGRS models for predicting soil erosion and shallow landslide sediment yield, and the FLO-2D model for calculating debris flow sediment yield. The proposed method was applied to potential debris-flow watersheds located in the Sioulin Township of Hualien County. The available data such as hourly rainfall data, historical streamflow and sediment records as well as event-based landslide inventory maps have been used for model calibration and validation. Results for simulating sediment yield have been confirmed by comparisons of observed data from several typhoon events. The verified method employed a 24-h design hyetograph with the 100-yr return period to simulate sediment yield within the study area. The results revealed that the influence of shallow landslides on sediment supply as compared with soil erosion was significant. The estimate of landslide transport capacity into a main channel indicated the sediment delivery ratio on a typhoon event basis was approximately 38.4%. In addition, a comparison of sediment yields computed from occurrence and non-occurrence of debris flow scenarios showed that the sediment yield from an occurrence condition was found to be increasing at about 14.2 times more than estimated under a non-occurrence condition. This implied watershed sediment hazard induced by debris flow may cause severe consequences.
- 12 May 2012
- Published by Springer Nature in Hydrogeology Journal
- Vol. 20 (6) , 1101-1116
Prediction of hydraulically transmissive fractures using geological and geophysical attributes: a case history from the mid Jhuoshuei River basin, Taiwan
- 12 May 2012
- Published by Springer Nature in Hydrogeology Journal
- Vol. 20 (6) , 1101-1116
Prediction of hydraulically transmissive fractures using geological and geophysical attributes: a case history from the mid Jhuoshuei River basin, Taiwan
- 14 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Coupled Stability Analyses of Rainfall Induced Landslide: A Case Study in Taiwan Piedmont Area
This study presents a 2D time-dependent infiltration-seepage-stability coupled hydrogeological model to simulate the seepage and slope stability of an active landslide site in northern Taiwan. The conceptual model and corresponding hydraulic and mechanical parameters applied in the model were based on a series of in-situ investigations and laboratory experimental results. A seepage analysis was conducted, and the model was calibrated and verified from the field monitoring data in order to minimize the difference between the computed pore pressures and the observed piezometric levels. A stability analysis coupled with the results of seepage analysis was performed to determine the slip potential of the landslide site under the rainfall brought up by two typhoon events. Various designed rainfall with different patterns, intensity and accumulated amount was then introduced in the model. The relationship between different rainfall characteristics and stability of the landslide site was identified and provided a good indication for the risk management under various rainfall conditions.
- 14 May 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1-8
Coupled Stability Analyses of Rainfall Induced Landslide: A Case Study in Taiwan Piedmont Area
This study presents a 2D time-dependent infiltration-seepage-stability coupled hydrogeological model to simulate the seepage and slope stability of an active landslide site in northern Taiwan. The conceptual model and corresponding hydraulic and mechanical parameters applied in the model were based on a series of in-situ investigations and laboratory experimental results. A seepage analysis was conducted, and the model was calibrated and verified from the field monitoring data in order to minimize the difference between the computed pore pressures and the observed piezometric levels. A stability analysis coupled with the results of seepage analysis was performed to determine the slip potential of the landslide site under the rainfall brought up by two typhoon events. Various designed rainfall with different patterns, intensity and accumulated amount was then introduced in the model. The relationship between different rainfall characteristics and stability of the landslide site was identified and provided a good indication for the risk management under various rainfall conditions.
- Open Access
- 23 March 2010
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 10 (3) , 535-545
Applications of simulation technique on debris-flow hazard zone delineation: a case study in Hualien County, Taiwan
Debris flows pose severe hazards to communities in mountainous areas, often resulting in the loss of life and property. Helping debris-flow-prone communities delineate potential hazard zones provides local authorities with useful information for developing emergency plans and disaster management policies. In 2003, the Soil and Water Conservation Bureau of Taiwan proposed an empirical model to delineate hazard zones for all creeks (1420 in total) with potential of debris flows and utilized the model to help establish a hazard prevention system. However, the model does not fully consider hydrologic and physiographical conditions for a given creek in simulation. The objective of this study is to propose new approaches that can improve hazard zone delineation accuracy and simulate hazard zones in response to different rainfall intensity. In this study, a two-dimensional commercial model FLO-2D, physically based and taking into account the momentum and energy conservation of flow, was used to simulate debris-flow inundated areas. Sensitivity analysis with the model was conducted to determine the main influence parameters which affect debris flow simulation. Results indicate that the roughness coefficient, yield stress and volumetric sediment concentration dominate the computed results. To improve accuracy of the model, the study examined the performance of the rainfall-runoff model of FLO-2D as compared with that of the HSPF (Hydrological Simulation Program Fortran) model, and then the proper values of the significant parameters were evaluated through the calibration process. Results reveal that the HSPF model has a better performance than the FLO-2D model at peak flow and flow recession period, and the volumetric sediment concentration and yield stress can be estimated by the channel slope. The validation of the model for simulating debris-flow hazard zones has been confirmed by a comparison of field evidence from historical debris-flow disaster data. The model can successfully replicate the influence zone of the debris-flow disaster event with an acceptable error and demonstrate a better result than the empirical model adopted by the Soil and Water Conservation Bureau of Taiwan.
- 23 March 2010
- Published by Copernicus GmbH in Natural Hazards and Earth System Sciences
- Vol. 10 (3) , 535-545
Open AccessApplications of simulation technique on debris-flow hazard zone delineation: a case study in Hualien County, Taiwan
Debris flows pose severe hazards to communities in mountainous areas, often resulting in the loss of life and property. Helping debris-flow-prone communities delineate potential hazard zones provides local authorities with useful information for developing emergency plans and disaster management policies. In 2003, the Soil and Water Conservation Bureau of Taiwan proposed an empirical model to delineate hazard zones for all creeks (1420 in total) with potential of debris flows and utilized the model to help establish a hazard prevention system. However, the model does not fully consider hydrologic and physiographical conditions for a given creek in simulation. The objective of this study is to propose new approaches that can improve hazard zone delineation accuracy and simulate hazard zones in response to different rainfall intensity. In this study, a two-dimensional commercial model FLO-2D, physically based and taking into account the momentum and energy conservation of flow, was used to simulate debris-flow inundated areas. Sensitivity analysis with the model was conducted to determine the main influence parameters which affect debris flow simulation. Results indicate that the roughness coefficient, yield stress and volumetric sediment concentration dominate the computed results. To improve accuracy of the model, the study examined the performance of the rainfall-runoff model of FLO-2D as compared with that of the HSPF (Hydrological Simulation Program Fortran) model, and then the proper values of the significant parameters were evaluated through the calibration process. Results reveal that the HSPF model has a better performance than the FLO-2D model at peak flow and flow recession period, and the volumetric sediment concentration and yield stress can be estimated by the channel slope. The validation of the model for simulating debris-flow hazard zones has been confirmed by a comparison of field evidence from historical debris-flow disaster data. The model can successfully replicate the influence zone of the debris-flow disaster event with an acceptable error and demonstrate a better result than the empirical model adopted by the Soil and Water Conservation Bureau of Taiwan.
- 15 February 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 980-989
Integrating Multiple Subsurface Exploration Technologies in Slope Hydrogeologic Investigation: A Case Study in Taiwan
This study aims at presenting an integration of different downhole prospecting techniques for hydrogeologic investigation in an active landslide area. A series of subsurface exploration technologies were conducted, including borehole image scanning, electric logging, groundwater velocity measurements, and double packer testing. Both acoustic and optical borehole loggings as well as electric logging were applied to identify lithology, water bearing capacity and fracturing of the formation around the boring. Subsequently, borehole flow logs were used to indicate the distribution of permeability and hydraulic connectivity of fractures along the borehole. Based on the above prospecting results, test sections of hydraulic tests can be arranged. Finally, hydraulic packer tests were carried out to further characterize the hydrogeologic system of the site and quantitatively determine the hydraulic properties of major hydrogeologic units. Integrating multiple downhole prospecting techniques on slope hydrogeology investigation not only provides hydraulic properties for a study area, but also brings information to establish a hydrogeologic conceptual model and process the model simulation.
- 15 February 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 980-989
Integrating Multiple Subsurface Exploration Technologies in Slope Hydrogeologic Investigation: A Case Study in Taiwan
This study aims at presenting an integration of different downhole prospecting techniques for hydrogeologic investigation in an active landslide area. A series of subsurface exploration technologies were conducted, including borehole image scanning, electric logging, groundwater velocity measurements, and double packer testing. Both acoustic and optical borehole loggings as well as electric logging were applied to identify lithology, water bearing capacity and fracturing of the formation around the boring. Subsequently, borehole flow logs were used to indicate the distribution of permeability and hydraulic connectivity of fractures along the borehole. Based on the above prospecting results, test sections of hydraulic tests can be arranged. Finally, hydraulic packer tests were carried out to further characterize the hydrogeologic system of the site and quantitatively determine the hydraulic properties of major hydrogeologic units. Integrating multiple downhole prospecting techniques on slope hydrogeology investigation not only provides hydraulic properties for a study area, but also brings information to establish a hydrogeologic conceptual model and process the model simulation.
- 7 March 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 452-459
A Rock Mass Classification Scheme for Estimating Hydraulic Conductivity of Fractured Rocks
This paper proposes a new application of the rock mass classification concept on the estimation of hydraulic conductivity of fractured rocks. The new rock mass classification system called as "HC-system" based on the following four parameters: rock quality designation (RQD), depth index (DI), gouge content designation (GCD), and lithology permeability index (LPI). HC-values can be calculated from borehole image data and rock core data. To verify rationality of the defined HC-system, the study collected data from the results of two hydrogeological investigation programs in three boreholes to determine a relationship between hydraulic conductivity and HC. Regression analysis was performed to estimate the dependence of HC on hydraulic conductivity. The regression results indicated that a power law relationship exists between the two variables with a coefficient of determination of 0.866. The regression equation provides a useful tool to predict hydraulic conductivity of fractured rocks based on measured HC-values. By using this regression equation, hydraulic conductivity data in a given site can be directly acquired, which removes the cost on hydraulic tests. For in-situ aquifer tests, the HC-system is a valuable new rock mass classification system for preliminary assessment of the degree of permeability in a packed-off interval of a borehole.
- 7 March 2008
- Published by American Society of Civil Engineers (ASCE)
- p. 452-459
A Rock Mass Classification Scheme for Estimating Hydraulic Conductivity of Fractured Rocks
This paper proposes a new application of the rock mass classification concept on the estimation of hydraulic conductivity of fractured rocks. The new rock mass classification system called as "HC-system" based on the following four parameters: rock quality designation (RQD), depth index (DI), gouge content designation (GCD), and lithology permeability index (LPI). HC-values can be calculated from borehole image data and rock core data. To verify rationality of the defined HC-system, the study collected data from the results of two hydrogeological investigation programs in three boreholes to determine a relationship between hydraulic conductivity and HC. Regression analysis was performed to estimate the dependence of HC on hydraulic conductivity. The regression results indicated that a power law relationship exists between the two variables with a coefficient of determination of 0.866. The regression equation provides a useful tool to predict hydraulic conductivity of fractured rocks based on measured HC-values. By using this regression equation, hydraulic conductivity data in a given site can be directly acquired, which removes the cost on hydraulic tests. For in-situ aquifer tests, the HC-system is a valuable new rock mass classification system for preliminary assessment of the degree of permeability in a packed-off interval of a borehole.