Olha Ilinska
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Olha Ilinska has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Viacheslav Berezutskyi
Department of Occupational and Environmental Safety, National Technical University “Kharkiv Polytechnic Institute”, Kharkiv, Ukraine
3 shared publications - Viktoriia Kalyna
Dnipro State Agrarian and Economic University
2 shared publications - Ihor Petik
Ukrainian Scientific Research Institute of Oils and Fats of the National Academy of Agricultural Sciences of Ukraine
1 shared publication - Inna Zabrodina
State Biotechnological University
1 shared publication - Iryna Mezentseva
National Technical University "Kharkiv Polytechnic Institute
1 shared publication Kharkiv Polytechnic Institute"
1 shared publication
Latest Publications
- Open Access
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (122)) , 112-120
Development of extruded animal feed based on fat and oil industry waste
The paper considers the way to solve the problem of processing waste from the oil and fat industry, namely sunflower and soybean meals, which are a source of many valuable substances. The peculiarity of the work lies in determining the rational ratio of the base components of extruded animal feed, which is an important aspect of obtaining high-quality competitive products. The research object is the use of oil and fat industry waste in extruded animal feed technology. The rational ratio of the components of extruded animal feed has been determined. The rational ratio of animal feed components is: sunflower meal – 0.40 parts by weight; soybean meal – 0.25 parts by weight; oatmeal – 0.35 parts by weight. The animal feed sample with justified composition corresponds to the commercial analogue in terms of porosity (72 % and 76 %, respectively) and cost ($285/t and $285/t, respectively). In addition, the extruded feed with the developed composition exceeds the commercial analogue in terms of protein content by 3.2 times and essential amino acids content by 2.9 times. The obtained data are explained by the use of a complex of components, namely oil and fat waste and starch-containing grain raw materials with various limiting amino acids and various technological features of the extruded mass of their mixture. The feature of the obtained results is the possibility to control the technological characteristic (porosity) of the finished product depending on the components ratio, which allows changing product characteristics according to consumer requirements. The research results make it possible to efficiently process secondary products of oilseed processing into a new competitive marketable product. From a practical point of view, the technology makes it possible to reduce the cost of storage/utilization of industry waste, get additional income from new products sales and improve environmental conditions. The applied aspect of using the scientific result is the possibility to create a range of animal feed with different technological indicators depending on the components ratio.
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (122)) , 112-120
Open AccessDevelopment of extruded animal feed based on fat and oil industry waste
The paper considers the way to solve the problem of processing waste from the oil and fat industry, namely sunflower and soybean meals, which are a source of many valuable substances. The peculiarity of the work lies in determining the rational ratio of the base components of extruded animal feed, which is an important aspect of obtaining high-quality competitive products. The research object is the use of oil and fat industry waste in extruded animal feed technology. The rational ratio of the components of extruded animal feed has been determined. The rational ratio of animal feed components is: sunflower meal – 0.40 parts by weight; soybean meal – 0.25 parts by weight; oatmeal – 0.35 parts by weight. The animal feed sample with justified composition corresponds to the commercial analogue in terms of porosity (72 % and 76 %, respectively) and cost ($285/t and $285/t, respectively). In addition, the extruded feed with the developed composition exceeds the commercial analogue in terms of protein content by 3.2 times and essential amino acids content by 2.9 times. The obtained data are explained by the use of a complex of components, namely oil and fat waste and starch-containing grain raw materials with various limiting amino acids and various technological features of the extruded mass of their mixture. The feature of the obtained results is the possibility to control the technological characteristic (porosity) of the finished product depending on the components ratio, which allows changing product characteristics according to consumer requirements. The research results make it possible to efficiently process secondary products of oilseed processing into a new competitive marketable product. From a practical point of view, the technology makes it possible to reduce the cost of storage/utilization of industry waste, get additional income from new products sales and improve environmental conditions. The applied aspect of using the scientific result is the possibility to create a range of animal feed with different technological indicators depending on the components ratio.
- Open Access
- 1 February 2022
- Published by National University of Water and Environmental Engineering
ELECTRIC TREATMENT AND REGULATION OF BIOTOXIC PROPERTIES OF DRILLING WATERS
- 1 February 2022
- Published by National University of Water and Environmental Engineering
Open AccessELECTRIC TREATMENT AND REGULATION OF BIOTOXIC PROPERTIES OF DRILLING WATERS
- Open Access
- 29 December 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (10 (114)) , 23-29
Development of soapstock processing technology to ensure waste-free and safe production
Soapstock is a large-tonnage waste of the oil and fat industry, the disposal of which is environmentally hazardous. Processing of soapstock into industrially valuable products, in particular, fatty acids, is promising. The method for producing fatty acids, which consists in sequential saponification of soapstock with sodium hydroxide solution, salting out with sodium chloride and decomposition with sulfuric acid solution has been investigated. The feature of this work is the study of the effect of salting out conditions of saponified soapstock on the yield and neutralization number of fatty acids. As an experimental sample, sunflower soapstock was used, the indicators of which correspond to DSTU 5033 (CAS 68952-95-4): mass fraction of total fat – 67.3 %, fatty acids – 61.8 %, neutral fat – 5.5 %. Soapstock was subjected to preliminary saponification under the following conditions: duration 85 min., concentration of sodium hydroxide solution 45 %. After that, the saponified mass was subjected to salting out. The obtained core soap was decomposed with the sulfuric acid solution under the following conditions: temperature 90 °C, duration 40 min. Rational salting out conditions were determined: duration (80 min.) and sodium chloride concentration (16%). Under these conditions, the fatty acid yield is 95.0 %, the neutralization number is 194.8 mg KOH/g. The resulting fatty acids comply with DSTU 4860 (CAS 61788-66-7): the mass fraction of moisture and volatiles is 0.85 %, the mass fraction of total fat is 98.9 %, cleavage depth is 94.2 % oleic acid. This method of soapstock processing increases the fatty acid yield by 3.5 % compared to the method with saponification and decomposition, by 20.3 % compared to the method of soapstock decomposition with sulfuric acid. At the same time, the neutralization number increases by 4.1 % and 8.2 %, respectively. The improved method for fatty acids producing from soapstock provides high- quality fatty acids with increased yield.
- 29 December 2021
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (10 (114)) , 23-29
Open AccessDevelopment of soapstock processing technology to ensure waste-free and safe production
Soapstock is a large-tonnage waste of the oil and fat industry, the disposal of which is environmentally hazardous. Processing of soapstock into industrially valuable products, in particular, fatty acids, is promising. The method for producing fatty acids, which consists in sequential saponification of soapstock with sodium hydroxide solution, salting out with sodium chloride and decomposition with sulfuric acid solution has been investigated. The feature of this work is the study of the effect of salting out conditions of saponified soapstock on the yield and neutralization number of fatty acids. As an experimental sample, sunflower soapstock was used, the indicators of which correspond to DSTU 5033 (CAS 68952-95-4): mass fraction of total fat – 67.3 %, fatty acids – 61.8 %, neutral fat – 5.5 %. Soapstock was subjected to preliminary saponification under the following conditions: duration 85 min., concentration of sodium hydroxide solution 45 %. After that, the saponified mass was subjected to salting out. The obtained core soap was decomposed with the sulfuric acid solution under the following conditions: temperature 90 °C, duration 40 min. Rational salting out conditions were determined: duration (80 min.) and sodium chloride concentration (16%). Under these conditions, the fatty acid yield is 95.0 %, the neutralization number is 194.8 mg KOH/g. The resulting fatty acids comply with DSTU 4860 (CAS 61788-66-7): the mass fraction of moisture and volatiles is 0.85 %, the mass fraction of total fat is 98.9 %, cleavage depth is 94.2 % oleic acid. This method of soapstock processing increases the fatty acid yield by 3.5 % compared to the method with saponification and decomposition, by 20.3 % compared to the method of soapstock decomposition with sulfuric acid. At the same time, the neutralization number increases by 4.1 % and 8.2 %, respectively. The improved method for fatty acids producing from soapstock provides high- quality fatty acids with increased yield.
- Open Access
- 24 September 2020
- Published by RS Global Sp. z O.O. in World Science
- No. 8(60)
ПІДСИСТЕМА «ПРАЦІВНИК» У СИСТЕМІ КЕРУВАННЯ ОХОРОНОЮ ПРАЦІ НА ПІДПРИЄМСТВІ
Розглянуто теоретичні засади щодо підходів у вирішенні проблеми зменшення травматизму та покращення умов праці. Показано, що складність питання щодо забезпечення ефективного рівня безпеки працівників, вимагає застосування багатофакторних методів дослідження. Наведені результати у теоретичному досліджені довели необхідність та можливість використання теорії системного аналізу у поєднанні із теорією автоматичного керування та теорії надійності для досягнення цієї мети. Визначено, що виробничі умови праці та завдання, які висуваються керівниками до працівників, у 21 сторіччі, все більше набувають формалізованого (детермінованого) вигляду. Працівники на виробництві щодо питань безпечного поводження, повинні дотримуватись правил, які обмежують їх активність, а це накладає відбиток на їх поведінку. Доведено, що треба враховувати можливі збурення та протидію щодо виконання цих правил та обмежень. Необхідно реєструвати усі помилки та відхилення від нормального стану працівника починаючи із самих незначних. Показано, що система керування безпекою базується на ефективній та безпомилкової роботи підсистеми «працівник», яка носить ймовірнісний характер (за природою свого походження), тобто помилки можуть мати місце у роботі. Вказується на необхідність врахування усіх складових дуалістичної схеми керування СУПБЗ. Наголошується на тому, що необхідно переглянути усі інструкції з охорони праці із урахуванням ризиків не виконання вимог безпеки та з урахуванням їх наслідків. Звертається увага на те, що системи автоматичного контролю у системах автоматичного керування, повинні бути втілені на виробництві для забезпечення реєстрації безпомилкової роботи працівників, та надання їм допомоги у разі складних виробничих ситуацій.
- 24 September 2020
- Published by RS Global Sp. z O.O. in World Science
- No. 8(60)
Open AccessПІДСИСТЕМА «ПРАЦІВНИК» У СИСТЕМІ КЕРУВАННЯ ОХОРОНОЮ ПРАЦІ НА ПІДПРИЄМСТВІ
Розглянуто теоретичні засади щодо підходів у вирішенні проблеми зменшення травматизму та покращення умов праці. Показано, що складність питання щодо забезпечення ефективного рівня безпеки працівників, вимагає застосування багатофакторних методів дослідження. Наведені результати у теоретичному досліджені довели необхідність та можливість використання теорії системного аналізу у поєднанні із теорією автоматичного керування та теорії надійності для досягнення цієї мети. Визначено, що виробничі умови праці та завдання, які висуваються керівниками до працівників, у 21 сторіччі, все більше набувають формалізованого (детермінованого) вигляду. Працівники на виробництві щодо питань безпечного поводження, повинні дотримуватись правил, які обмежують їх активність, а це накладає відбиток на їх поведінку. Доведено, що треба враховувати можливі збурення та протидію щодо виконання цих правил та обмежень. Необхідно реєструвати усі помилки та відхилення від нормального стану працівника починаючи із самих незначних. Показано, що система керування безпекою базується на ефективній та безпомилкової роботи підсистеми «працівник», яка носить ймовірнісний характер (за природою свого походження), тобто помилки можуть мати місце у роботі. Вказується на необхідність врахування усіх складових дуалістичної схеми керування СУПБЗ. Наголошується на тому, що необхідно переглянути усі інструкції з охорони праці із урахуванням ризиків не виконання вимог безпеки та з урахуванням їх наслідків. Звертається увага на те, що системи автоматичного контролю у системах автоматичного керування, повинні бути втілені на виробництві для забезпечення реєстрації безпомилкової роботи працівників, та надання їм допомоги у разі складних виробничих ситуацій.
- Open Access
- 24 April 2019
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (10 (98)) , 16-26
Determining the effect of multifunctional partitions on noise level at "Open space" offices
Determining the effect of multifunctional partitions on noise level at "Open space" offices
- 24 April 2019
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (10 (98)) , 16-26
Open AccessDetermining the effect of multifunctional partitions on noise level at "Open space" offices
Determining the effect of multifunctional partitions on noise level at "Open space" offices