Samuel Connor
Samuel Connor has a total of 161 co-authors. Here are the top co-authors by number of shared publications:
Bruce Archambeault
IBM, Armonk, NY, USA
39 shared publications- Michael Cracraft
IBM Corporation
18 shared publications - Francesco de Paulis
University of L’Aquila
9 shared publications Matteo Cocchini
IBM Corporation
9 shared publicationsB. Archambeault
EMC Laboratory, Missouri University of Science and Technology, Rolla, MO-65401, USA
8 shared publicationsJames Drewniak
EMC Laboratory, Missouri University of Science and Technology, Rolla, MO-65401, USA
8 shared publications
Latest Publications
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal and Power Integrity
- Vol. 2, 103-110
Inductance Calculation for the Power Net Area Fill of Packages and PCBs Based on Plane-Pair PEEC
The inductance of the power/ground planes is an integral contributor to the input impedance of a power delivery network for high-speed printed circuit boards (PCBs) and packages. Conventionally, differential-equation (DE) circuit and cavity type models have been applied to compute the inductive behavior of the plane-to-plane inductance. However, these methods are not suitable for the case where the structures are perforated or involve other uneven structures. In this article, a new partial-element-equivalent-circuit (PEEC)-based method is presented to compute the inductance of parallel plate-like planes and other structures. Examples are given to show that the new method can efficiently compute inductances for multiple integrated circuit power vias, power/ground planes, and multiple decoupling capacitors. The proposed model is validated with both full-wave CEM simulations as well as with measurements. Further, the speed and the accuracy for real PCB and package designs are presented to validate the efficiency as well as the accuracy of the proposed approach. An important aspect of any approach is the limitations for solving real life problems. In this article, we consider important issues related of plane-pair PEEC to power distribution evaluations. Specifically, we show that large holes in planes can accurately be modeled. This is a difficult issue for DE methods. Another surprising practical issue is the accuracy obtained even if the planes are not of the same size. We also consider the speedup, which can be obtained in comparison to solutions for other approaches. This is due to the sparsity of the coupling for the rapid coupling decrease with distance. This short-distance coupling also increases the maximum frequency for which the method can be applied.
- 16 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal and Power Integrity
- Vol. 2, 103-110
Inductance Calculation for the Power Net Area Fill of Packages and PCBs Based on Plane-Pair PEEC
The inductance of the power/ground planes is an integral contributor to the input impedance of a power delivery network for high-speed printed circuit boards (PCBs) and packages. Conventionally, differential-equation (DE) circuit and cavity type models have been applied to compute the inductive behavior of the plane-to-plane inductance. However, these methods are not suitable for the case where the structures are perforated or involve other uneven structures. In this article, a new partial-element-equivalent-circuit (PEEC)-based method is presented to compute the inductance of parallel plate-like planes and other structures. Examples are given to show that the new method can efficiently compute inductances for multiple integrated circuit power vias, power/ground planes, and multiple decoupling capacitors. The proposed model is validated with both full-wave CEM simulations as well as with measurements. Further, the speed and the accuracy for real PCB and package designs are presented to validate the efficiency as well as the accuracy of the proposed approach. An important aspect of any approach is the limitations for solving real life problems. In this article, we consider important issues related of plane-pair PEEC to power distribution evaluations. Specifically, we show that large holes in planes can accurately be modeled. This is a difficult issue for DE methods. Another surprising practical issue is the accuracy obtained even if the planes are not of the same size. We also consider the speedup, which can be obtained in comparison to solutions for other approaches. This is due to the sparsity of the coupling for the rapid coupling decrease with distance. This short-distance coupling also increases the maximum frequency for which the method can be applied.
- 12 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (1) , 237-245
Accurate Inductance Models of Mounted Two-Terminal Decoupling Capacitors
- 12 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 63 (1) , 237-245
Accurate Inductance Models of Mounted Two-Terminal Decoupling Capacitors
- 7 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (1) , 142-150
Circuit Models for the Inductance of Eight-Terminal Decoupling Capacitors
- 7 November 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 10 (1) , 142-150
Circuit Models for the Inductance of Eight-Terminal Decoupling Capacitors
- Open Access
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (4) , 1266-1277
Physics-Based Circuit Modeling Methodology for System Power Integrity Analysis and Design
A physics-based circuit modeling methodology for system-level power integrity (PI) analysis and design is presented herein. The modeling methodology is based on representing the current paths in the power distribution network (PDN) with appropriate circuits based on cavity model and plane-pair partial element equivalent circuit (PEEC). The PDN input impedance looking from on-chip sources can be computed. A commercial simulation tool is used to corroborate the modeling approach where the system consists of a commercial integrated circuits, a complex organic package and a very high-layer-count printed circuit board. Two types of circuit models are proposed from the methodology with physical correspondence maintained in the circuit elements. The circuits can be used to analyze the geometry impact on the PDN impedance and explore design improvements. Voltage ripple simulations are conducted with the circuit models. The simulated results correlated with measurements. The modeling methodology helps to understand the impact of the fundamental physics of the different parts of the PDN system and the impact of changes in the PI designs.
- 23 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (4) , 1266-1277
Open AccessPhysics-Based Circuit Modeling Methodology for System Power Integrity Analysis and Design
A physics-based circuit modeling methodology for system-level power integrity (PI) analysis and design is presented herein. The modeling methodology is based on representing the current paths in the power distribution network (PDN) with appropriate circuits based on cavity model and plane-pair partial element equivalent circuit (PEEC). The PDN input impedance looking from on-chip sources can be computed. A commercial simulation tool is used to corroborate the modeling approach where the system consists of a commercial integrated circuits, a complex organic package and a very high-layer-count printed circuit board. Two types of circuit models are proposed from the methodology with physical correspondence maintained in the circuit elements. The circuits can be used to analyze the geometry impact on the PDN impedance and explore design improvements. Voltage ripple simulations are conducted with the circuit models. The simulated results correlated with measurements. The modeling methodology helps to understand the impact of the fundamental physics of the different parts of the PDN system and the impact of changes in the PI designs.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 379-384
System Level Power Integrity Analysis with Physics-Based Modeling Methodology
A physics-based circuit modeling methodology is proposed in this paper for system level power integrity (PI) analysis. The circuit model is extracted by following the current paths in the system PDN based on cavity model and plane-pair PEEC models. The modeling methodology connects the footprints of geometry details to the PDN input impedance looking into the system from the IC chip. With further reductions of the physics-based circuit model, an engineering circuit model which explains the hierarchical charge delivery mechanism is proposed. The engineering circuit model reveals the role of PDNs from each level in the system. A commercial PDN system with a complex organic package, high-layer-count printed circuit board, and IC is used to validate the modeling methodology in the paper. The PDN input impedance has a good match with the impedance profile simulated with a commercial PI analysis tool for the system. The engineering circuit model is also validated for the PI analysis. The modeling methodology illustrates the fundamental physics in the PDN charge delivery and can be used for other PI analysis later.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 379-384
System Level Power Integrity Analysis with Physics-Based Modeling Methodology
A physics-based circuit modeling methodology is proposed in this paper for system level power integrity (PI) analysis. The circuit model is extracted by following the current paths in the system PDN based on cavity model and plane-pair PEEC models. The modeling methodology connects the footprints of geometry details to the PDN input impedance looking into the system from the IC chip. With further reductions of the physics-based circuit model, an engineering circuit model which explains the hierarchical charge delivery mechanism is proposed. The engineering circuit model reveals the role of PDNs from each level in the system. A commercial PDN system with a complex organic package, high-layer-count printed circuit board, and IC is used to validate the modeling methodology in the paper. The PDN input impedance has a good match with the impedance profile simulated with a commercial PI analysis tool for the system. The engineering circuit model is also validated for the PI analysis. The modeling methodology illustrates the fundamental physics in the PDN charge delivery and can be used for other PI analysis later.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 234-237
Analysis of High Speed Differential Pair Routing through Dense Via Arrays
Modern server systems contain printed circuit boards with over 30 layers and incredibly dense wiring to provide the processors with all the input/output (I/O) and memory data that are required for high performance computing. When high speed differential pairs must be routed through dense via arrays, such as one would find under a ball grid array (BGA) component or surface mounted connector, they cannot follow the same wiring rules used in the open areas of the board. The wiring style used can have a large effect on the insertion and return losses and on the crosstalk between neighboring pairs. In this paper, we simulate a variety of wiring styles through a representative via array and compare those results to measurements made on a hardware prototype.
- 1 July 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 234-237
Analysis of High Speed Differential Pair Routing through Dense Via Arrays
Modern server systems contain printed circuit boards with over 30 layers and incredibly dense wiring to provide the processors with all the input/output (I/O) and memory data that are required for high performance computing. When high speed differential pairs must be routed through dense via arrays, such as one would find under a ball grid array (BGA) component or surface mounted connector, they cannot follow the same wiring rules used in the open areas of the board. The wiring style used can have a large effect on the insertion and return losses and on the crosstalk between neighboring pairs. In this paper, we simulate a variety of wiring styles through a representative via array and compare those results to measurements made on a hardware prototype.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 213-218
Modeling and analysis of package PDN for computing system based on cavity model
Recent computing systems consume more than several hundred watts of power and a robust PDN design is critical to minimize power/ground (P/G) voltage fluctuation and get stable performance. In most cases, the IC package (PKG) PDN determines mid-frequency P/G noise characteristics. The PDN of our target IC package consists of more than ten thousands staggered microvias and tens of layers, representing a significant modeling challenge. Commercial tools can estimate the PKG PDN impedance via full-wave simulations, but it has several limitations at pre-layout stage. Whole simulation should be run for every small geometry changes and it takes much time. It can give circuit model seen at port, but does not provide physics-based circuit models corresponding to whole current path. In this paper we apply the cavity model, which has been previously largely used for PCB modeling, to a complex organic package structure. We here describe the assumptions used to get an equivalent circuit model for this type of geometry and the comparison of its loop inductances with commercial tools. The cavity model gives about 10 % error compared to commercial tool and the reason of error is analyzed. In addition, a study of the PKG decoupling capacitors location is performed with the goal of a minimal loop inductance. In the final paragraph, several unique features of the PKG PDN compared to PCB PDN modeling are described.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 213-218
Modeling and analysis of package PDN for computing system based on cavity model
Recent computing systems consume more than several hundred watts of power and a robust PDN design is critical to minimize power/ground (P/G) voltage fluctuation and get stable performance. In most cases, the IC package (PKG) PDN determines mid-frequency P/G noise characteristics. The PDN of our target IC package consists of more than ten thousands staggered microvias and tens of layers, representing a significant modeling challenge. Commercial tools can estimate the PKG PDN impedance via full-wave simulations, but it has several limitations at pre-layout stage. Whole simulation should be run for every small geometry changes and it takes much time. It can give circuit model seen at port, but does not provide physics-based circuit models corresponding to whole current path. In this paper we apply the cavity model, which has been previously largely used for PCB modeling, to a complex organic package structure. We here describe the assumptions used to get an equivalent circuit model for this type of geometry and the comparison of its loop inductances with commercial tools. The cavity model gives about 10 % error compared to commercial tool and the reason of error is analyzed. In addition, a study of the PKG decoupling capacitors location is performed with the goal of a minimal loop inductance. In the final paragraph, several unique features of the PKG PDN compared to PCB PDN modeling are described.
- 15 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (4) , 1339-1346
Inductance Extraction for PCB Prelayout Power Integrity Using PMSR Method
Proper power integrity (PI) analysis is required for printed circuit board (PCB) power distribution network (PDN) design. Top-layer interconnect inductance for PI has always been a vital concern for high-speed industry. Developing a simple physics-based equivalent circuit model for critical structures is essential for understanding the physics of the system and for intelligent designs. In this paper, a physics-based model size reduction (PMSR) method is applied to get the equivalent circuit model for the above-ground geometries. The extracted physics-based models are also based on the partial element equivalent circuit (PEEC) method, and can be used in analyzing the structure in its parts. By applying PMSR method, a physics-based equivalent circuit model can be proposed and this circuit model is related to the geometric features of the design. In this way, PMSR method can provide an intuitive guideline in designing PCB and reducing above inductances, therefore, a low-ripple dc voltage can be delivered through PDN. Taking advantage of PEEC and PMSR methods, the top-layer inductances of three different geometries are calculated and the physics-based circuit models are obtained, respectively.
- 15 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (4) , 1339-1346
Inductance Extraction for PCB Prelayout Power Integrity Using PMSR Method
Proper power integrity (PI) analysis is required for printed circuit board (PCB) power distribution network (PDN) design. Top-layer interconnect inductance for PI has always been a vital concern for high-speed industry. Developing a simple physics-based equivalent circuit model for critical structures is essential for understanding the physics of the system and for intelligent designs. In this paper, a physics-based model size reduction (PMSR) method is applied to get the equivalent circuit model for the above-ground geometries. The extracted physics-based models are also based on the partial element equivalent circuit (PEEC) method, and can be used in analyzing the structure in its parts. By applying PMSR method, a physics-based equivalent circuit model can be proposed and this circuit model is related to the geometric features of the design. In this way, PMSR method can provide an intuitive guideline in designing PCB and reducing above inductances, therefore, a low-ripple dc voltage can be delivered through PDN. Taking advantage of PEEC and PMSR methods, the top-layer inductances of three different geometries are calculated and the physics-based circuit models are obtained, respectively.
- Retracted
- 10 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (4) , 1203-1210
Notice of Retraction: Electric Dipole Equations in Very-Near-Field Conditions for Electromagnetic Shielding Assessment—Part II: Wave Impedance, Reflection, and Transmission
This paper analyzes, in a quantitative way, the properties of the spatial distribution at the interface of the wave impedance as defined by Schelkunoff, in order to understand if and under which assumptions his transmission line theory for the evaluation of the shielding effectiveness can be used in the near-field region of a radiating electric dipole. The spatial distribution of the wave impedance and the reflection, and transmission coefficients are computed by the analytical formulation developed in Part I, and compared to those computed by an accurate 3-D full-wave model.
- 10 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 59 (4) , 1203-1210
RetractedNotice of Retraction: Electric Dipole Equations in Very-Near-Field Conditions for Electromagnetic Shielding Assessment—Part II: Wave Impedance, Reflection, and Transmission
This paper analyzes, in a quantitative way, the properties of the spatial distribution at the interface of the wave impedance as defined by Schelkunoff, in order to understand if and under which assumptions his transmission line theory for the evaluation of the shielding effectiveness can be used in the near-field region of a radiating electric dipole. The spatial distribution of the wave impedance and the reflection, and transmission coefficients are computed by the analytical formulation developed in Part I, and compared to those computed by an accurate 3-D full-wave model.