Alessandro Sona
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alessandro Sona has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Matteo Bertocco
Department of Information Engineering, University of Padova, 35131 Padova, Italy
5 shared publications - G. Gamba
Department of Information Engineering, University of Padova, via G. Gradenigo, 6/B - 35131 Padova, Italy. Phone: +39 049 8277743, Fax: +39 049 8277699
4 shared publications - Leopoldo Angrisani
Department of Information Technology and Electrical Engineering (DIETI), University of Naples Federico II, Naples, Italy
4 shared publications - Daniele Fortin
Department of Information Engineering, University of Padova, via G. Gradenigo, 6/b - 35131 Padova, Italy. Phone: +39 049 8277627, Fax: +39 049 8277699
2 shared publications - Aniello Napolitano
Department of Electrical Engineering, University of Naples Federico II, via Claudio 21, 80125, Naples, Italy. Phone: +39 081 7683866, Fax: +39 081 2396897
1 shared publication - Bruno Audone
Sinal, Italy
1 shared publication
Latest Publications
- 3 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (4) , 1342-1348
Augmented Thevenin Model for the Harmonic Analysis of Switching Circuits
This article addresses the use of the Thevenin equivalent model in the case of switching circuits. An augmented Thevenin model is proposed, based on a well-established augmented equivalent approach for the analysis of periodically switched linear networks. It can profitably be used to provide a time-invariant equivalent description of a switching network and to investigate on the harmonics behavior at any of its ports even upon the varying of one of its internal parameters. This makes the article interesting for harmonic analysis purposes as, for instance, in the analysis and troubleshooting of electromagnetic interference or in the monitoring of a system behavior through the assessment and analysis of some of its spectral components. The model has also the advantage to be simple in its implementation. The feasibility and potentiality of the method are verified via simulations and comparisons with the results obtained by applying the augmented equivalent approach to the case of a dc–dc Buck converter.
- 3 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electromagnetic Compatibility
- Vol. 62 (4) , 1342-1348
Augmented Thevenin Model for the Harmonic Analysis of Switching Circuits
This article addresses the use of the Thevenin equivalent model in the case of switching circuits. An augmented Thevenin model is proposed, based on a well-established augmented equivalent approach for the analysis of periodically switched linear networks. It can profitably be used to provide a time-invariant equivalent description of a switching network and to investigate on the harmonics behavior at any of its ports even upon the varying of one of its internal parameters. This makes the article interesting for harmonic analysis purposes as, for instance, in the analysis and troubleshooting of electromagnetic interference or in the monitoring of a system behavior through the assessment and analysis of some of its spectral components. The model has also the advantage to be simple in its implementation. The feasibility and potentiality of the method are verified via simulations and comparisons with the results obtained by applying the augmented equivalent approach to the case of a dc–dc Buck converter.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10915281,p. 354-359
A measurement approach based on micro-doppler maps for human motion analysis and detection
Human motion analysis is a task of increasing importance in several modern application fields, such as in medicine, avionics, security, and disaster recovery. It requires the application of sophisticated measurement techniques based on micro-Doppler effect, human walking modeling, cinematic simulation, image processing and measurements. In this paper, a novel and comprehensive measurement approach is proposed for the detection and analysis of human motion. The approach combines theoretical concepts and tools of micro-Doppler theory, image processing, and human modeling, in a original way. The attention is primarily focused on some measurement issues and implications that, if taken into account, can give an important enhancement to micro-Doppler-based future applications. Some simulation results concerning one specific issue of the measurement approach are finally provided and discussed.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10915281,p. 354-359
A measurement approach based on micro-doppler maps for human motion analysis and detection
Human motion analysis is a task of increasing importance in several modern application fields, such as in medicine, avionics, security, and disaster recovery. It requires the application of sophisticated measurement techniques based on micro-Doppler effect, human walking modeling, cinematic simulation, image processing and measurements. In this paper, a novel and comprehensive measurement approach is proposed for the detection and analysis of human motion. The approach combines theoretical concepts and tools of micro-Doppler theory, image processing, and human modeling, in a original way. The attention is primarily focused on some measurement issues and implications that, if taken into account, can give an important enhancement to micro-Doppler-based future applications. Some simulation results concerning one specific issue of the measurement approach are finally provided and discussed.
- 5 February 2010
- Published by Springer Nature
- p. 405-415
Challenges and Design Issues in a Distributed Measurement Scenario
- 5 February 2010
- Published by Springer Nature
- p. 405-415
Challenges and Design Issues in a Distributed Measurement Scenario
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 376-381
Modeling the Performance of CSMA-CA Based Wireless Networks Versus Interference Level
Wireless communication networks based on non-scheduled random medium access methods, such as carrier sense multiple access with collision avoidance (CSMA/CA), can be affected by in- channel interference at two different levels: at physical (PHY) layer, in terms of data packet collisions, and at medium access control (MAC) layer, in terms of channel occupation. The separate knowledge of such interference effects may represent an essential information to be used in a design or setup stage of CSMA/CA-based wireless networks. To this aim, a simple yet effective two-layer model is proposed in the paper. The model allows to clearly distinguish the effect of both interference contributions and to forecast the network performance in terms of packet error ratio, in the presence of interference. An example of how to use the model, and results from experiments, validating the model, are both reported. The experiments have been conducted through a suitable testbed enlisting a IEEE 802.15.4-compliant wireless sensor network.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 376-381
Modeling the Performance of CSMA-CA Based Wireless Networks Versus Interference Level
Wireless communication networks based on non-scheduled random medium access methods, such as carrier sense multiple access with collision avoidance (CSMA/CA), can be affected by in- channel interference at two different levels: at physical (PHY) layer, in terms of data packet collisions, and at medium access control (MAC) layer, in terms of channel occupation. The separate knowledge of such interference effects may represent an essential information to be used in a design or setup stage of CSMA/CA-based wireless networks. To this aim, a simple yet effective two-layer model is proposed in the paper. The model allows to clearly distinguish the effect of both interference contributions and to forecast the network performance in terms of packet error ratio, in the presence of interference. An example of how to use the model, and results from experiments, validating the model, are both reported. The experiments have been conducted through a suitable testbed enlisting a IEEE 802.15.4-compliant wireless sensor network.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1722-1727
Are IEEE 802.11 Wireless Networks Appropriate for Video Streaming in the Presence of Interference? An Experimental Answer
The performance of video streaming applications over wireless local area network (WLANs), in presence of interference, are here dealt with. In particular, the IEEE 802.11g standard is considered and Bluetooth and WLAN competitive data traffic are analyzed as interferer. The analysis is conducted experimentally following a cross-layer approach and through the use of properly developed testbed within a semi-anechoic chamber. The goal is to investigate the performance of video streaming applications over WLAN in the presence of both network/transport and physical layer interference, and to deduce from the experiments valuable hints for improving the setup of a WLAN.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1722-1727
Are IEEE 802.11 Wireless Networks Appropriate for Video Streaming in the Presence of Interference? An Experimental Answer
The performance of video streaming applications over wireless local area network (WLANs), in presence of interference, are here dealt with. In particular, the IEEE 802.11g standard is considered and Bluetooth and WLAN competitive data traffic are analyzed as interferer. The analysis is conducted experimentally following a cross-layer approach and through the use of properly developed testbed within a semi-anechoic chamber. The goal is to investigate the performance of video streaming applications over WLAN in the presence of both network/transport and physical layer interference, and to deduce from the experiments valuable hints for improving the setup of a WLAN.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1712-1717
Assessment of Out-of-Channel Interference Effects on IEEE 802.15.4 Wireless Sensor Networks
The impact of out-of-channel interference on IEEE 802.15.4 wireless sensor networks (WSNs) performance is here dealt with. In particular, the effect on networks based on the carrier sense multiple access with collision avoidance (CSMA/CA) protocol is investigated. To this aim, a theoretical analysis of the problem is outlined, and results from both simulations and experiments are provided. Measurements are performed both at physical layer, through parameters like in-channel power, and at network layer, through packet error ratio estimates. The purpose is to provide from simulations and experiments a set of helpful information and hints to be used for an efficient measurement and troubleshoot of interference problems caused on IEEE 802.15.4 WSNs by out-of-band signals.
- 1 May 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1712-1717
Assessment of Out-of-Channel Interference Effects on IEEE 802.15.4 Wireless Sensor Networks
The impact of out-of-channel interference on IEEE 802.15.4 wireless sensor networks (WSNs) performance is here dealt with. In particular, the effect on networks based on the carrier sense multiple access with collision avoidance (CSMA/CA) protocol is investigated. To this aim, a theoretical analysis of the problem is outlined, and results from both simulations and experiments are provided. Measurements are performed both at physical layer, through parameters like in-channel power, and at network layer, through packet error ratio estimates. The purpose is to provide from simulations and experiments a set of helpful information and hints to be used for an efficient measurement and troubleshoot of interference problems caused on IEEE 802.15.4 WSNs by out-of-band signals.
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 109-114
Optimized uncertainty estimation in the calibration of two-port networks transmission coefficient
The uncertainty evaluation in the calibration of two-port networks transmission coefficient is here dealt with Attention is focused on the covariance contribution of the uncertainty expression and on the effect of mismatch terms. To this aim, the approach suggested by the Guide for the expression of uncertainty in measurement (GUM) is discussed, and solutions are proposed aimed at optimally combining all the uncertainty terms to be considered. To confer reliability and generality to the research activity, a number of experiments are conducted through a proper test bench. The ultimate goal is to provide practical hints for improving the calibration accuracy of two-port networks transmission coefficient, and simplifying the derivation of the standard uncertainty.
- 1 July 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 109-114
Optimized uncertainty estimation in the calibration of two-port networks transmission coefficient
The uncertainty evaluation in the calibration of two-port networks transmission coefficient is here dealt with Attention is focused on the covariance contribution of the uncertainty expression and on the effect of mismatch terms. To this aim, the approach suggested by the Guide for the expression of uncertainty in measurement (GUM) is discussed, and solutions are proposed aimed at optimally combining all the uncertainty terms to be considered. To confer reliability and generality to the research activity, a number of experiments are conducted through a proper test bench. The ultimate goal is to provide practical hints for improving the calibration accuracy of two-port networks transmission coefficient, and simplifying the derivation of the standard uncertainty.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Performance Measurements of CSMA/CA-Based Wireless Sensor Networks for Industrial Applications
The performance of modern wireless communication systems are strictly related to the adopted medium access mechanism. An effective one, based on the carrier sense multiple access with collision avoidance technique, is hereinafter investigated. In particular, the performance of a CSMA/CA-based wireless sensor network, designed for industrial monitoring and performing both cyclic polling and acyclic alarm management, are analyzed. Effects of in-channel interference are also studied. The aim of the paper is to gain, from practical experiments, results and guidelines useful for the measurement and optimization of CSMA/CA-based sensor network performance, when employed for industrial monitoring. In such direction, a suitable IEEE 802.15.4 wireless sensors' testbed has been deployed and an high layer protocol for industrial monitoring has been implemented. The results obtained from the experiments carried out are shown.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Performance Measurements of CSMA/CA-Based Wireless Sensor Networks for Industrial Applications
The performance of modern wireless communication systems are strictly related to the adopted medium access mechanism. An effective one, based on the carrier sense multiple access with collision avoidance technique, is hereinafter investigated. In particular, the performance of a CSMA/CA-based wireless sensor network, designed for industrial monitoring and performing both cyclic polling and acyclic alarm management, are analyzed. Effects of in-channel interference are also studied. The aim of the paper is to gain, from practical experiments, results and guidelines useful for the measurement and optimization of CSMA/CA-based sensor network performance, when employed for industrial monitoring. In such direction, a suitable IEEE 802.15.4 wireless sensors' testbed has been deployed and an high layer protocol for industrial monitoring has been implemented. The results obtained from the experiments carried out are shown.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Assessing coexistence problems of IEEE 802.11b and IEEE 802.15.4 wireless networks through cross-layer measurements
Coexistence issues between IEEE 802.11b (Wi-Fi) wireless communication networks and IEEE 802.15.4 wireless sensor networks (WSN), operating within the same 2.4 GHz ISM-band, are hereinafter assessed. In particular, meaningful experiments performed through a suitable testbed and a cross-layer measurement approach are presented. Such experiments are executed both at physical layer, through measurements of channel power and signal-to-interference ratio (SIR), and at network/transport layer, by means of packet loss ratio estimations. Different testbed configurations are analyzed, varying characteristics like packet rate, packet size, SIR, network topology and number of wireless nodes. The purpose of the work is to deduce from experiments practical information and guidelines showing how optimizing networks setup and mitigating coexistence problems in some real-life configurations. Practical details about testbed, test environment and performed experiments are provided in the paper.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Assessing coexistence problems of IEEE 802.11b and IEEE 802.15.4 wireless networks through cross-layer measurements
Coexistence issues between IEEE 802.11b (Wi-Fi) wireless communication networks and IEEE 802.15.4 wireless sensor networks (WSN), operating within the same 2.4 GHz ISM-band, are hereinafter assessed. In particular, meaningful experiments performed through a suitable testbed and a cross-layer measurement approach are presented. Such experiments are executed both at physical layer, through measurements of channel power and signal-to-interference ratio (SIR), and at network/transport layer, by means of packet loss ratio estimations. Different testbed configurations are analyzed, varying characteristics like packet rate, packet size, SIR, network topology and number of wireless nodes. The purpose of the work is to deduce from experiments practical information and guidelines showing how optimizing networks setup and mitigating coexistence problems in some real-life configurations. Practical details about testbed, test environment and performed experiments are provided in the paper.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Performance assessment and optimization of DVB-T systems affected by in-channel interference
Digital Video Broadcasting Terrestrial (DVB-T) systems affected by in-channel interference are here dealt with. Attention is paid to the assessment of the effects the interference produces, especially in terms of video quality perceived by the end user. To this aim, a number of experiments are conducted through a proper testbed, which enlists a high performance measurement apparatus, a flexible DVB-T transmission platform, a typical receiver stage, and a calibrated interference source. To confer reliability and generality to the research activity, different configurations of the platform parameters, common types of interference, several digital videos, and ordinary channel characteristics are considered. Moreover, a cross layer measurement approach is exploited; valuable relations involving the values that physical and modulation quantities as well as application level metrics assume at the same time are thus gained. The ultimate goal is to provide helpful information and hints for designers and broadcasters, to be applied whenever optimizing the performance of a DVB-T system affected by detrimental interference is of primary concern.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in 2007 IEEE Instrumentation & Measurement Technology Conference IMTC 2007
- No. 10915281,p. 1-6
Performance assessment and optimization of DVB-T systems affected by in-channel interference
Digital Video Broadcasting Terrestrial (DVB-T) systems affected by in-channel interference are here dealt with. Attention is paid to the assessment of the effects the interference produces, especially in terms of video quality perceived by the end user. To this aim, a number of experiments are conducted through a proper testbed, which enlists a high performance measurement apparatus, a flexible DVB-T transmission platform, a typical receiver stage, and a calibrated interference source. To confer reliability and generality to the research activity, different configurations of the platform parameters, common types of interference, several digital videos, and ordinary channel characteristics are considered. Moreover, a cross layer measurement approach is exploited; valuable relations involving the values that physical and modulation quantities as well as application level metrics assume at the same time are thus gained. The ultimate goal is to provide helpful information and hints for designers and broadcasters, to be applied whenever optimizing the performance of a DVB-T system affected by detrimental interference is of primary concern.