Kamal Agrawal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kamal Agrawal has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Keshav Singh
National Sun Yat-Sen University
15 shared publications - Shankar Prakriya
Department of Electrical Engineering, Indian Institute of Technology Delhi, New Delhi, India
14 shared publications - Chih-Peng Li
National Sun Yat-sen University, Kaohsiung, Taiwan
12 shared publications - Sandeep Kumar Singh
Department of Electronics and Communication Engineering, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, India
10 shared publications - Anand Jee
Department of Electrical Engineering, Indian Institute of Technology Delhi, New Delhi, India
9 shared publications Shankar Prakriya
5 shared publications
Latest Publications
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 72  (2) , 4384-4395
Full-Duplex ISAC Systems: Sum-Rate and Sensing-Rate Performance With Fairness
To date, most research on full-duplex (FD) integrated sensing and communications (ISAC) has focused on systems with either FD base stations or FD user devices, while a unified analysis of FD operation at both the base station and communication devices, capturing simultaneous bidirectional communication and sensing trade-offs, remains largely unexplored. In this work, we address this gap by investigating the performance of an FD-ISAC system comprising an FD base station (BS), FD communication devices (CDs), and monostatic sensing targets. The proposed framework enables simultaneous uplink and downlink communication while the BS performs target detection over the same frequency band. A unified transmit signal model with a power-apportioning (PA) parameter is introduced to balance communication and sensing functionalities. Residual loopback interference (LI) at both BS and FD devices is explicitly incorporated into the system model, and compact signal-to-interference-plus-noise ratio (SINR) expressions are derived for uplink, downlink, and sensing links. Under Nakagami-m fading, analytical expressions for ergodic capacities are obtained, and for the special case of Rayleigh fading, closed-form solutions are derived. To evaluate sensing performance, the Fisher information matrix (FIM) and Cramer-Rao lower bound (CRLB) are formulated, directly linking sensing accuracy to the PA parameter. Furthermore, the paper proposes an optimization strategy to maximize the communication sum rate while guaranteeing a minimum sensing rate, with Jain’s fairness index employed to quantify the trade-off between the two functionalities. Analytical results are validated through extensive Monte Carlo simulations, confirming the accuracy of the proposed model. Overall, this work provides design insights and performance benchmarks for the practical deployment of FD-ISAC systems in future wireless applications such as autonomous vehicles, IoT, and immersive services.
- 10 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 72  (2) , 4384-4395
Full-Duplex ISAC Systems: Sum-Rate and Sensing-Rate Performance With Fairness
To date, most research on full-duplex (FD) integrated sensing and communications (ISAC) has focused on systems with either FD base stations or FD user devices, while a unified analysis of FD operation at both the base station and communication devices, capturing simultaneous bidirectional communication and sensing trade-offs, remains largely unexplored. In this work, we address this gap by investigating the performance of an FD-ISAC system comprising an FD base station (BS), FD communication devices (CDs), and monostatic sensing targets. The proposed framework enables simultaneous uplink and downlink communication while the BS performs target detection over the same frequency band. A unified transmit signal model with a power-apportioning (PA) parameter is introduced to balance communication and sensing functionalities. Residual loopback interference (LI) at both BS and FD devices is explicitly incorporated into the system model, and compact signal-to-interference-plus-noise ratio (SINR) expressions are derived for uplink, downlink, and sensing links. Under Nakagami-m fading, analytical expressions for ergodic capacities are obtained, and for the special case of Rayleigh fading, closed-form solutions are derived. To evaluate sensing performance, the Fisher information matrix (FIM) and Cramer-Rao lower bound (CRLB) are formulated, directly linking sensing accuracy to the PA parameter. Furthermore, the paper proposes an optimization strategy to maximize the communication sum rate while guaranteeing a minimum sensing rate, with Jain’s fairness index employed to quantify the trade-off between the two functionalities. Analytical results are validated through extensive Monte Carlo simulations, confirming the accuracy of the proposed model. Overall, this work provides design insights and performance benchmarks for the practical deployment of FD-ISAC systems in future wireless applications such as autonomous vehicles, IoT, and immersive services.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 6827-6842
Quantum-Driven Resource Optimization for Full-Duplex STAR-RIS-Aided NOMA-ISAC With Constraint Projection
This paper proposes a projected quantum gradient descent (P-QGD) framework for joint beamforming and simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) configuration in full-duplex non-orthogonal multiple access (NOMA)-assisted integrated sensing and communication (ISAC) systems. A parameterized quantum circuit (PQC) encodes downlink beamforming vectors, STAR-RIS phase shifts, and amplitude reflection/transmission coefficients into quantum states using Pauli-$X$ rotation gates. At each iteration, measurement-based stochastic gradients are projected onto a constrained feasible set to ensure physical realizability, including unit-modulus phase constraints, amplitude normalization, and transmit power limits. A convergence guarantee is established under standard smoothness and bounded variance assumptions. The proposed P-QGD method exhibits logarithmic scaling in parameter dimensionality and achieves faster convergence compared to classical projected stochastic gradient descent (P-SGD). Extensive simulations validate that P-QGD yields higher downlink sum rate, improved sensing signal-to-interference-plus-noise ratio, and superior beamforming sharpness across varying reconfigurable intelligent surfaces (RIS) sizes, channel state information errors, and sensing–communication trade-offs. The framework also enables physical interpretability by linking quantum-optimized parameters to far-field beam pattern behavior. This work demonstrates the feasibility and advantages of quantum-native optimization in RIS-aided ISAC systems with constrained, multi-objective requirements.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network Science and Engineering
- Vol. 13, 6827-6842
Quantum-Driven Resource Optimization for Full-Duplex STAR-RIS-Aided NOMA-ISAC With Constraint Projection
This paper proposes a projected quantum gradient descent (P-QGD) framework for joint beamforming and simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) configuration in full-duplex non-orthogonal multiple access (NOMA)-assisted integrated sensing and communication (ISAC) systems. A parameterized quantum circuit (PQC) encodes downlink beamforming vectors, STAR-RIS phase shifts, and amplitude reflection/transmission coefficients into quantum states using Pauli-$X$ rotation gates. At each iteration, measurement-based stochastic gradients are projected onto a constrained feasible set to ensure physical realizability, including unit-modulus phase constraints, amplitude normalization, and transmit power limits. A convergence guarantee is established under standard smoothness and bounded variance assumptions. The proposed P-QGD method exhibits logarithmic scaling in parameter dimensionality and achieves faster convergence compared to classical projected stochastic gradient descent (P-SGD). Extensive simulations validate that P-QGD yields higher downlink sum rate, improved sensing signal-to-interference-plus-noise ratio, and superior beamforming sharpness across varying reconfigurable intelligent surfaces (RIS) sizes, channel state information errors, and sensing–communication trade-offs. The framework also enables physical interpretability by linking quantum-optimized parameters to far-field beam pattern behavior. This work demonstrates the feasibility and advantages of quantum-native optimization in RIS-aided ISAC systems with constrained, multi-objective requirements.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12  (18) , 37094-37104
Spectral-Efficient Near-Field ISAC With URLLC: Advancing Integrated Sensing and mBRLLC
This article investigate an unconventional integration of integrated sensing and communication (ISAC) with mobile broadband ultrareliable low-latency communication (mBRLLC). Specifically, a dual-functional radar-communication access point (DFRC-AP) with extremely large-aperture arrays (ELAA) serve multiple communication nodes and perform near-field radar sensing while meeting strict ultrareliable low-latency communication (URLLC) requirements. Unlike conventional works focusing on rate maximization or latency-reliability tradeoffs, the prime objective is to maximize the worst-case achievable rate while considering sensing and block-length constraints. A hybrid-beamforming design problem is formulated which is solved using a suboptimal alternating optimization (AO) framework, combining convex approximations and manifold optimization. Extensive simulations demonstrate fast convergence and robust performance under varying system parameters, showcasing the potential of the proposed framework to improve communication and sensing efficiency in next-generation networks. The results demonstrate that hybrid beamforming offers a optimal tradeoff between communication and sensing performance with improved computational efficiency and hardware cost when compared to fully digital precoding. Moreover, the near-field considerations enhances sensing and mBRLLC performance with more users.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12  (18) , 37094-37104
Spectral-Efficient Near-Field ISAC With URLLC: Advancing Integrated Sensing and mBRLLC
This article investigate an unconventional integration of integrated sensing and communication (ISAC) with mobile broadband ultrareliable low-latency communication (mBRLLC). Specifically, a dual-functional radar-communication access point (DFRC-AP) with extremely large-aperture arrays (ELAA) serve multiple communication nodes and perform near-field radar sensing while meeting strict ultrareliable low-latency communication (URLLC) requirements. Unlike conventional works focusing on rate maximization or latency-reliability tradeoffs, the prime objective is to maximize the worst-case achievable rate while considering sensing and block-length constraints. A hybrid-beamforming design problem is formulated which is solved using a suboptimal alternating optimization (AO) framework, combining convex approximations and manifold optimization. Extensive simulations demonstrate fast convergence and robust performance under varying system parameters, showcasing the potential of the proposed framework to improve communication and sensing efficiency in next-generation networks. The results demonstrate that hybrid beamforming offers a optimal tradeoff between communication and sensing performance with improved computational efficiency and hardware cost when compared to fully digital precoding. Moreover, the near-field considerations enhances sensing and mBRLLC performance with more users.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74  (11) , 17577-17592
FBL Driven Battery-Assisted Energy Harvesting Full-Duplex Cooperative NOMA With SIC and CSI Imperfections
This paper explores a cooperative non-orthogonal multiple access (NOMA) network that includes a multi-antenna base station (B), a nearby Internet-of-Thing (IoT) user (NU) with full-duplex capabilities, and several distant IoT users (FU). The NU employs a time-switching (TS) energy harvesting (EH) protocol, supplementing the harvested energy with a small amount from its battery to enhance the performance of FU. The study introduces a novel cooperative NOMA/non-cooperative (C-NM/NC) switching scheme, considering factors such as imperfect successive interference cancellation (SIC), channel state information (CSI) errors, and nonlinear EH. Closed-form expressions for average blocklength error rates (BLER) for both users are derived within the finite blocklength regime. These BLER expressions are used to analytically express key performance metrics such as goodput, reliability, latency, and energy efficiency (EE). The study emphasizes the significant performance degradation caused by CSI errors for both users. It is shown that the novel C-NM/NC switching allows FU to consistently achieve performance on par with the C-NM mode, even when meeting a specific NU throughput requirement. Maximizing FU goodput is demonstrated to be possible through careful adjustment of TS parameters and battery energy. Moreover, C-NM/NC switching not only enhances EE but also improves self-interference immunity. Monte Carlo simulations are performed to validate the accuracy of the analytical results.
- 16 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74  (11) , 17577-17592
FBL Driven Battery-Assisted Energy Harvesting Full-Duplex Cooperative NOMA With SIC and CSI Imperfections
This paper explores a cooperative non-orthogonal multiple access (NOMA) network that includes a multi-antenna base station (B), a nearby Internet-of-Thing (IoT) user (NU) with full-duplex capabilities, and several distant IoT users (FU). The NU employs a time-switching (TS) energy harvesting (EH) protocol, supplementing the harvested energy with a small amount from its battery to enhance the performance of FU. The study introduces a novel cooperative NOMA/non-cooperative (C-NM/NC) switching scheme, considering factors such as imperfect successive interference cancellation (SIC), channel state information (CSI) errors, and nonlinear EH. Closed-form expressions for average blocklength error rates (BLER) for both users are derived within the finite blocklength regime. These BLER expressions are used to analytically express key performance metrics such as goodput, reliability, latency, and energy efficiency (EE). The study emphasizes the significant performance degradation caused by CSI errors for both users. It is shown that the novel C-NM/NC switching allows FU to consistently achieve performance on par with the C-NM mode, even when meeting a specific NU throughput requirement. Maximizing FU goodput is demonstrated to be possible through careful adjustment of TS parameters and battery energy. Moreover, C-NM/NC switching not only enhances EE but also improves self-interference immunity. Monte Carlo simulations are performed to validate the accuracy of the analytical results.
- Open Access
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Dynamic Time Switching Protocol for Full-Duplex Energy Harvesting Communication with Battery Energy Management
In this paper, a two-hop cooperative network's performance is analyzed assuming a channel-aware dynamic time-switching (TS) energy harvesting (EH) protocol at the battery-assisted EH full-duplex relay node. In such networks, node-level energy considerations are important for efficient battery utilization but have not attracted research attention. Two battery management schemes are considered. In the first scheme, fixed battery energy (FBE) is added to the harvested energy. To further improve performance, a new dynamic battery energy (DBE) scheme is considered in which the amount of battery energy drawn is channel-dependent. The performance of the network is analyzed with both FBE and DBE schemes for static and dynamic TS schemes assuming a practical nonlinear EH model. Expressions for the average battery energy consumption are also presented in each case. It is demonstrated that joint optimization of the average battery energy consumption and the TS parameter is important. It is also demonstrated that the proposed dynamic TS protocol provides substantial gains in throughput and average energy savings compared to the static TS protocol with both FBE and DBE. Computer simulations validate the derived expressions.
- 27 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessDynamic Time Switching Protocol for Full-Duplex Energy Harvesting Communication with Battery Energy Management
In this paper, a two-hop cooperative network's performance is analyzed assuming a channel-aware dynamic time-switching (TS) energy harvesting (EH) protocol at the battery-assisted EH full-duplex relay node. In such networks, node-level energy considerations are important for efficient battery utilization but have not attracted research attention. Two battery management schemes are considered. In the first scheme, fixed battery energy (FBE) is added to the harvested energy. To further improve performance, a new dynamic battery energy (DBE) scheme is considered in which the amount of battery energy drawn is channel-dependent. The performance of the network is analyzed with both FBE and DBE schemes for static and dynamic TS schemes assuming a practical nonlinear EH model. Expressions for the average battery energy consumption are also presented in each case. It is demonstrated that joint optimization of the average battery energy consumption and the TS parameter is important. It is also demonstrated that the proposed dynamic TS protocol provides substantial gains in throughput and average energy savings compared to the static TS protocol with both FBE and DBE. Computer simulations validate the derived expressions.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 9  (4) , 2043-2058
Performance of Partitioning Enabled IRS-Assisted NOMA Network With Opportunistic User Relaying
This paper investigates a partition-based intelligent reflective surface (IRS) aided cooperative non-orthogonal multiple access (C-NOMA) framework where the source communicates with a near user (NU) and a far user (FU). Based on one-bit feedback from the users, opportunistic mode switching among non-orthogonal multiple access (NOMA), orthogonal multiple access (OMA), and C-NOMA modes is performed to ensure that the NU does not compromise on its performance for cooperating with FU. To minimize energy expenditure at the NU, the IRS is also utilized in the second phase with C-NOMA in this novel signalling scheme. Both co-phasing (COP) that requires channel feedback, and random phase shifting (RPS) without channel feedback are considered. Closed-form expressions are derived for NU and FU throughput. We demonstrate that the choice of power allocation coefficient and partitioning is crucial, but the difficult two-dimensional search is reduced to a simple one-dimensional one over integer parameter, greatly reducing the search complexity. The suggested scheme ensures higher throughput, user fairness, and energy efficiency in comparison to the frameworks with fixed transmission modes, and those that do not use the IRS in the second phase of signalling. The derived analytical expressions are validated by Monte Carlo simulations.=-1
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Green Communications and Networking
- Vol. 9  (4) , 2043-2058
Performance of Partitioning Enabled IRS-Assisted NOMA Network With Opportunistic User Relaying
This paper investigates a partition-based intelligent reflective surface (IRS) aided cooperative non-orthogonal multiple access (C-NOMA) framework where the source communicates with a near user (NU) and a far user (FU). Based on one-bit feedback from the users, opportunistic mode switching among non-orthogonal multiple access (NOMA), orthogonal multiple access (OMA), and C-NOMA modes is performed to ensure that the NU does not compromise on its performance for cooperating with FU. To minimize energy expenditure at the NU, the IRS is also utilized in the second phase with C-NOMA in this novel signalling scheme. Both co-phasing (COP) that requires channel feedback, and random phase shifting (RPS) without channel feedback are considered. Closed-form expressions are derived for NU and FU throughput. We demonstrate that the choice of power allocation coefficient and partitioning is crucial, but the difficult two-dimensional search is reduced to a simple one-dimensional one over integer parameter, greatly reducing the search complexity. The suggested scheme ensures higher throughput, user fairness, and energy efficiency in comparison to the frameworks with fixed transmission modes, and those that do not use the IRS in the second phase of signalling. The derived analytical expressions are validated by Monte Carlo simulations.=-1
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73  (6) , 4486-4502
Performance of Battery-Assisted EH Full-Duplex NOMA Network With FBL Driven Mode Switching Under Imperfect CSI and SIC
This paper investigates a cooperative Internet of Things (IoT) non-orthogonal multiple access (NOMA) network comprising of a multi-antenna base station (BS), a near IoT user (NU) with full-duplex capabilities, and multiple far IoT users (FU). The NU utilizes the power-splitting (PS) energy harvesting (EH) protocol and augments the harvested energy with a little energy from its battery to assist the FU. Considering the novel cooperative NOMA/non-cooperative (C-NM/NC) switching, the impact of successive interference cancellation (SIC), channel state information (CSI) errors, and nonlinear EH, closed-form expressions are derived for average blocklength error rates (BLER) of both users in finite blocklength regime. Utilizing the derived BLER expressions, the Goodput, Reliability, Latency, and battery power efficiency are expressed in closed form. We then demonstrate that the CSI errors severely degrades the performance of both the users. Monte Carlo simulations validate the accuracy of the derived analytical expressions. We also establish that a significantly better maximum performance is attained at the FU, given a target NU Goodput by the careful choice of NOMA and EH parameters. C-NM/NC switching offers a higher EE and better self-interference immunity. Results indicate that the choice of blocklength is crucial for efficient system performance.
- 27 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73  (6) , 4486-4502
Performance of Battery-Assisted EH Full-Duplex NOMA Network With FBL Driven Mode Switching Under Imperfect CSI and SIC
This paper investigates a cooperative Internet of Things (IoT) non-orthogonal multiple access (NOMA) network comprising of a multi-antenna base station (BS), a near IoT user (NU) with full-duplex capabilities, and multiple far IoT users (FU). The NU utilizes the power-splitting (PS) energy harvesting (EH) protocol and augments the harvested energy with a little energy from its battery to assist the FU. Considering the novel cooperative NOMA/non-cooperative (C-NM/NC) switching, the impact of successive interference cancellation (SIC), channel state information (CSI) errors, and nonlinear EH, closed-form expressions are derived for average blocklength error rates (BLER) of both users in finite blocklength regime. Utilizing the derived BLER expressions, the Goodput, Reliability, Latency, and battery power efficiency are expressed in closed form. We then demonstrate that the CSI errors severely degrades the performance of both the users. Monte Carlo simulations validate the accuracy of the derived analytical expressions. We also establish that a significantly better maximum performance is attained at the FU, given a target NU Goodput by the careful choice of NOMA and EH parameters. C-NM/NC switching offers a higher EE and better self-interference immunity. Results indicate that the choice of blocklength is crucial for efficient system performance.
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12  (5) , 5901-5917
Performance of a Cluster-Based Multihop IoT Network With Battery-Assisted Energy Harvesting
This work investigates a multi-hop multi-relay network in which all nodes are of the battery-assisted (BA) energy harvesting (EH) type, and harvest energy from a power beacon. In each hop, the node with the most harvested energy is selected for relaying and augments the harvested energy with some battery energy. Note that such BA EH nodes are immediately realizable to prolong battery lifetimes. Considering nonlinear EH, analytical expressions are derived for outage probability, throughput, average battery energy consumption, and battery energy efficiency (BEE). It is first shown how the parameters can be chosen to maximize the network throughput. Since unsuccessful relaying that results in outage causes battery energy to be consumed, optimizing the network to minimize the average battery energy consumption or to maximize the node-level BEE is well motivated. We show that the judicious selection of the EH duration can minimize average battery energy consumption while achieving the target throughput requirement. Moreover, a joint optimal choice of EH duration, hop count, and target information rate is shown to maximize overall BEE. Monte Carlo simulations validate the accuracy of the derived expressions.
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 12  (5) , 5901-5917
Performance of a Cluster-Based Multihop IoT Network With Battery-Assisted Energy Harvesting
This work investigates a multi-hop multi-relay network in which all nodes are of the battery-assisted (BA) energy harvesting (EH) type, and harvest energy from a power beacon. In each hop, the node with the most harvested energy is selected for relaying and augments the harvested energy with some battery energy. Note that such BA EH nodes are immediately realizable to prolong battery lifetimes. Considering nonlinear EH, analytical expressions are derived for outage probability, throughput, average battery energy consumption, and battery energy efficiency (BEE). It is first shown how the parameters can be chosen to maximize the network throughput. Since unsuccessful relaying that results in outage causes battery energy to be consumed, optimizing the network to minimize the average battery energy consumption or to maximize the node-level BEE is well motivated. We show that the judicious selection of the EH duration can minimize average battery energy consumption while achieving the target throughput requirement. Moreover, a joint optimal choice of EH duration, hop count, and target information rate is shown to maximize overall BEE. Monte Carlo simulations validate the accuracy of the derived expressions.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73  (5) , 3013-3030
SWIPT for Battery-Assisted Full-Duplex Relaying Networks With Finite Blocklength Codes
In this work, we consider a cooperative communication network wherein a base station (BS) utilizes a simultaneous wireless power and information transfer (SWIPT) energized full duplex-decode and forward relay to communicate with a downlink user. The relay augments the harvested energy with a bit of energy from its battery. Assuming a practical nonlinear energy harvesting (EH) model, we derive approximated closed-form expressions for the end-to-end blocklength error rate (BLER) under the finite blocklength (FBL) regime for both power splitting (PS) and time switching (TS) protocols. We then derive a high-SNR approximated expression for end-to-end BLER to demonstrate the interplay of the battery energy, blocklength, and EH parameters on the system’s performance. We also analytically establish the convexity of the BLER with respect to the relay’s battery energy. Using the expression for the BLER, we derive expressions for the goodput and battery energy efficiency in approximated closed-form. Moreover, for a desired target BLER requirement, we show that, by carefully choosing the TS/PS parameter, the required relay’s battery energy can be minimized. The accuracy of the derived analytical expressions is validated using Monte Carlo simulations. Finally, we discuss the impact of key parameters such as transmit power, total available blocklength, nonlinear EH, TS, and PS parameters, and battery energy on the network’s performance.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 73  (5) , 3013-3030
SWIPT for Battery-Assisted Full-Duplex Relaying Networks With Finite Blocklength Codes
In this work, we consider a cooperative communication network wherein a base station (BS) utilizes a simultaneous wireless power and information transfer (SWIPT) energized full duplex-decode and forward relay to communicate with a downlink user. The relay augments the harvested energy with a bit of energy from its battery. Assuming a practical nonlinear energy harvesting (EH) model, we derive approximated closed-form expressions for the end-to-end blocklength error rate (BLER) under the finite blocklength (FBL) regime for both power splitting (PS) and time switching (TS) protocols. We then derive a high-SNR approximated expression for end-to-end BLER to demonstrate the interplay of the battery energy, blocklength, and EH parameters on the system’s performance. We also analytically establish the convexity of the BLER with respect to the relay’s battery energy. Using the expression for the BLER, we derive expressions for the goodput and battery energy efficiency in approximated closed-form. Moreover, for a desired target BLER requirement, we show that, by carefully choosing the TS/PS parameter, the required relay’s battery energy can be minimized. The accuracy of the derived analytical expressions is validated using Monte Carlo simulations. Finally, we discuss the impact of key parameters such as transmit power, total available blocklength, nonlinear EH, TS, and PS parameters, and battery energy on the network’s performance.
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 71  (9) , 5137-5151
TS-Based SWIPT in Full-Duplex Relayed NOMA With Intelligent Relay Battery Management
This paper investigates the performance of a time-switching (TS) based cooperative non-orthogonal multiple access (NOMA) network consisting of a base station (BS), a near user (NU), a distant user (DU), and a full-duplex (FD) relay. The BS shares a direct link to the NU, while communication to the DU is assisted by a battery-aided energy harvesting FD relay. We consider a static battery energy (SBE) scheme in which a fixed amount of battery energy augments the harvested energy and analyze the performance of both NU and DU. Also, a new dynamic battery energy (DBE) scheme, wherein the harvested energy is augmented with as little battery energy as possible in order to achieve desired quality of service, is proposed and is shown to ensure efficient battery utilization. Considering a threshold-based nonlinear EH model, closed-form expressions are derived for the throughput of NU and DU for both SBE and DBE schemes. Furthermore, for the DBE scheme, we also derive an exact closed-form expression for the average battery energy drawn per symbol interval. We then demonstrate that the choice of battery energy and TS parameter is crucial to attain a maximum DU throughput while simultaneously guaranteeing a target throughput at the NU.
- 5 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 71  (9) , 5137-5151
TS-Based SWIPT in Full-Duplex Relayed NOMA With Intelligent Relay Battery Management
This paper investigates the performance of a time-switching (TS) based cooperative non-orthogonal multiple access (NOMA) network consisting of a base station (BS), a near user (NU), a distant user (DU), and a full-duplex (FD) relay. The BS shares a direct link to the NU, while communication to the DU is assisted by a battery-aided energy harvesting FD relay. We consider a static battery energy (SBE) scheme in which a fixed amount of battery energy augments the harvested energy and analyze the performance of both NU and DU. Also, a new dynamic battery energy (DBE) scheme, wherein the harvested energy is augmented with as little battery energy as possible in order to achieve desired quality of service, is proposed and is shown to ensure efficient battery utilization. Considering a threshold-based nonlinear EH model, closed-form expressions are derived for the throughput of NU and DU for both SBE and DBE schemes. Furthermore, for the DBE scheme, we also derive an exact closed-form expression for the average battery energy drawn per symbol interval. We then demonstrate that the choice of battery energy and TS parameter is crucial to attain a maximum DU throughput while simultaneously guaranteeing a target throughput at the NU.