Alexander M. Oddo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexander M. Oddo has a total of 71 co-authors. Here are the top co-authors by number of shared publications:
- Peidong Yang
Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, USA
9 shared publications - Eran Rabani
Department of Chemistry, University of California, Berkeley, USA
5 shared publications Chengyu Song
National Center for Electron Microscopy, Molecular Foundry
4 shared publications- Daniel Chabeda
Department of Chemistry, University of California, Berkeley, Berkeley, CA, USA
4 shared publications - Lihini Jayasinghe
Department of Chemistry, University of California, Berkeley, USA
3 shared publications - Arifin Luthfi Maulana
California Research Alliance (CARA), BASF Corporation, Berkeley, USA
2 shared publications
Latest Publications
- 30 March 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (4) , 639-647
Supramolecular assembly of molecular wires alternating crown ethers and metal–halide complexes
Metal-halide complexes serve as key emissive centres in halide perovskites; however, precise control over their spatial organization through bottom-up assembly is challenging. Here we show that a crown-ether-assisted supramolecular assembly strategy can alternatingly connect metal-halide complexes and (crown ether@A)2+ (where 'A' is an alkaline earth metal cation) complexes into a one-dimensional molecular wire, which can then be packed into a hexagonal crystal structure. This process resulted in the creation of an (18C6@Ba)MnBr4 single crystal with green emission, achieving over 80% photoluminescence quantum yield and a narrow full width at half maximum. In addition, the non-centrosymmetric crystal structure gave rise to strong nonlinear optical responses, including second-harmonic generation. This versatile supramolecular assembly approach could be generalized to create various [M(I)X2]-, [M(I)X3]2-, [M(II)X4]2- and [M(III)X5]2- molecular wires, broadening the potential for diverse emission colours and distinct optical properties. This strategy provides a general design principle for constructing supramolecular metal-halide building blocks with diverse optical functionalities.
- 30 March 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (4) , 639-647
Supramolecular assembly of molecular wires alternating crown ethers and metal–halide complexes
Metal-halide complexes serve as key emissive centres in halide perovskites; however, precise control over their spatial organization through bottom-up assembly is challenging. Here we show that a crown-ether-assisted supramolecular assembly strategy can alternatingly connect metal-halide complexes and (crown ether@A)2+ (where 'A' is an alkaline earth metal cation) complexes into a one-dimensional molecular wire, which can then be packed into a hexagonal crystal structure. This process resulted in the creation of an (18C6@Ba)MnBr4 single crystal with green emission, achieving over 80% photoluminescence quantum yield and a narrow full width at half maximum. In addition, the non-centrosymmetric crystal structure gave rise to strong nonlinear optical responses, including second-harmonic generation. This versatile supramolecular assembly approach could be generalized to create various [M(I)X2]-, [M(I)X3]2-, [M(II)X4]2- and [M(III)X5]2- molecular wires, broadening the potential for diverse emission colours and distinct optical properties. This strategy provides a general design principle for constructing supramolecular metal-halide building blocks with diverse optical functionalities.
- 30 March 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (6) , 1014-1022
A photochargeable semiconductor for highly efficient dehydrogenative coupling of amines
The development of materials with high photocatalytic efficiency is essential for sustainable chemical transformations. Here we introduce photochargeable zinc indium sulfide nanocrystals with notable charge storage capacity, enabling highly efficient photocatalytic dehydrogenative coupling of amines. Combined with a nickel cocatalyst, the nanocrystals deliver diamines and hydrogen at rates exceeding 120 mmol per gram of photocatalyst per hour, with > 95% selectivity and an apparent quantum efficiency of up to 39.4% under ambient conditions. The system exhibits excellent scalability, demonstrated by a reaction on a 20-g scale, and broad versatility in promoting amino acid ester coupling and polymerization reactions with concurrent hydrogen evolution. Mechanistic studies attribute the photocharging capability of zinc indium sulfide nanocrystals to in situ-generated trap states such as sulfur vacancies, which extend hydrogen production into the dark catalytic cycle and enhance the overall charge utilization efficiency. These findings position photochargeable semiconductors as promising platforms for a wide range of photocatalytic applications.
- 30 March 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (6) , 1014-1022
A photochargeable semiconductor for highly efficient dehydrogenative coupling of amines
The development of materials with high photocatalytic efficiency is essential for sustainable chemical transformations. Here we introduce photochargeable zinc indium sulfide nanocrystals with notable charge storage capacity, enabling highly efficient photocatalytic dehydrogenative coupling of amines. Combined with a nickel cocatalyst, the nanocrystals deliver diamines and hydrogen at rates exceeding 120 mmol per gram of photocatalyst per hour, with > 95% selectivity and an apparent quantum efficiency of up to 39.4% under ambient conditions. The system exhibits excellent scalability, demonstrated by a reaction on a 20-g scale, and broad versatility in promoting amino acid ester coupling and polymerization reactions with concurrent hydrogen evolution. Mechanistic studies attribute the photocharging capability of zinc indium sulfide nanocrystals to in situ-generated trap states such as sulfur vacancies, which extend hydrogen production into the dark catalytic cycle and enhance the overall charge utilization efficiency. These findings position photochargeable semiconductors as promising platforms for a wide range of photocatalytic applications.
- 19 March 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (12) , 9891-9901
Carrier Dynamics of Strongly Confined CsPbI 3 Nanowires
We investigate the carrier dynamics of strongly confined cesium lead iodide (CsPbI3) nanowires and compare them with weakly confined quantum dots (QDs) to understand how dimensionality affects recombination processes. Using time-resolved photoluminescence and ultrafast transient absorption spectroscopy, we find that nanowires exhibit a 5× faster recombination rate and more rapid carrier cooling than QDs. These differences are attributed to enhanced carrier interactions with trap states. Although nanowires exhibit slightly enhanced radiative rates as a result of confinement, their photoluminescence quantum yield remains relatively low, 23 ± 8%, due to competition from nonradiative recombination processes that occur at a faster rate. These findings highlight a dimensionality-dependent trade-off between radiative efficiency and nonradiative losses, providing insight into the limitations and opportunities for low-dimensional perovskite nanostructures. Our results establish design principles for tailoring CsPbI3 nanocrystal dimensionality to optimize optical performance in optoelectronic applications such as LEDs and solar cells.
- 19 March 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (12) , 9891-9901
Carrier Dynamics of Strongly Confined CsPbI 3 Nanowires
We investigate the carrier dynamics of strongly confined cesium lead iodide (CsPbI3) nanowires and compare them with weakly confined quantum dots (QDs) to understand how dimensionality affects recombination processes. Using time-resolved photoluminescence and ultrafast transient absorption spectroscopy, we find that nanowires exhibit a 5× faster recombination rate and more rapid carrier cooling than QDs. These differences are attributed to enhanced carrier interactions with trap states. Although nanowires exhibit slightly enhanced radiative rates as a result of confinement, their photoluminescence quantum yield remains relatively low, 23 ± 8%, due to competition from nonradiative recombination processes that occur at a faster rate. These findings highlight a dimensionality-dependent trade-off between radiative efficiency and nonradiative losses, providing insight into the limitations and opportunities for low-dimensional perovskite nanostructures. Our results establish design principles for tailoring CsPbI3 nanocrystal dimensionality to optimize optical performance in optoelectronic applications such as LEDs and solar cells.
- 24 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24179-24180
Correction to “Exploring the Structural Origins of Optically Efficient One-Dimensional Lead Halide Perovskite Nanostructures”
- 24 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (27) , 24179-24180
Correction to “Exploring the Structural Origins of Optically Efficient One-Dimensional Lead Halide Perovskite Nanostructures”
- 18 April 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (17) , 7029-7036
Emissive Chalcogenide Perovskite Nanowires
Efficient and stable one-dimensional semiconductor nanowires are critical for the development of next-generation on-chip optoelectronics. Here, we report a synthetic approach to produce high-quality nanowires based on chalcogenide perovskite via a vapor phase reaction inside a sealed ampule. An epitaxial vapor-phase growth mechanism is proposed. The nanowires are shown to be single crystalline and highly structurally stable, with a preferential growth along the [010] direction. Red and green photoluminescence (PL) is observed from BaZrS3 and SrHfS3 nanowires, respectively, and the emission is shown to be tunable with varying compositions. PL lifetime is measured by fitting the decay curve with a biexponential model. The longer radiative recombination lifetime component is on the time scale of nanoseconds, indicating good nanowire sample quality with a promising potential for optoelectronic applications.
- 18 April 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (17) , 7029-7036
Emissive Chalcogenide Perovskite Nanowires
Efficient and stable one-dimensional semiconductor nanowires are critical for the development of next-generation on-chip optoelectronics. Here, we report a synthetic approach to produce high-quality nanowires based on chalcogenide perovskite via a vapor phase reaction inside a sealed ampule. An epitaxial vapor-phase growth mechanism is proposed. The nanowires are shown to be single crystalline and highly structurally stable, with a preferential growth along the [010] direction. Red and green photoluminescence (PL) is observed from BaZrS3 and SrHfS3 nanowires, respectively, and the emission is shown to be tunable with varying compositions. PL lifetime is measured by fitting the decay curve with a biexponential model. The longer radiative recombination lifetime component is on the time scale of nanoseconds, indicating good nanowire sample quality with a promising potential for optoelectronic applications.
- 12 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (12) , 10466-10474
Exploring the Structural Origins of Optically Efficient One-Dimensional Lead Halide Perovskite Nanostructures
Metal halide perovskites have excellent optoelectronic properties. This study aims to determine how the optoelectronic properties of a model perovskite, cesium lead bromide (CsPbBr3), change with length and thickness in one dimension (1D). By examining the photophysics of CsPbBr3 quantum dots (QDs), nanowires (NWs), and nanorods (NRs), we observe the influence of confinement, exciton diffusion, and trapping on their optical properties. Our findings reveal that exciton diffusion to trap states limits the photoluminescence quantum yield (PLQY) of 1D CsPbBr3 in the weakly confined regime (8-14 nm) and explains their long-lived exciton dynamics, while enhanced radiative rates contribute to achieving near-unity PLQY in the strongly confined regime (3 NRs were 3.6X more emissive than the conventional CsPbBr3 QDs. This study underscores how structural optimization can improve the optoelectronic performance of CsPbBr3 and provides insight into the complex interplay of radiative and nonradiative processes in 1D ionic semiconductors.
- 12 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (12) , 10466-10474
Exploring the Structural Origins of Optically Efficient One-Dimensional Lead Halide Perovskite Nanostructures
Metal halide perovskites have excellent optoelectronic properties. This study aims to determine how the optoelectronic properties of a model perovskite, cesium lead bromide (CsPbBr3), change with length and thickness in one dimension (1D). By examining the photophysics of CsPbBr3 quantum dots (QDs), nanowires (NWs), and nanorods (NRs), we observe the influence of confinement, exciton diffusion, and trapping on their optical properties. Our findings reveal that exciton diffusion to trap states limits the photoluminescence quantum yield (PLQY) of 1D CsPbBr3 in the weakly confined regime (8-14 nm) and explains their long-lived exciton dynamics, while enhanced radiative rates contribute to achieving near-unity PLQY in the strongly confined regime (3 NRs were 3.6X more emissive than the conventional CsPbBr3 QDs. This study underscores how structural optimization can improve the optoelectronic performance of CsPbBr3 and provides insight into the complex interplay of radiative and nonradiative processes in 1D ionic semiconductors.
- 13 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (4) , 3428-3437
Photocatalytic Methanol Dehydrogenation with Switchable Selectivity
Switchable selectivity achieved by altering reaction conditions within the same photocatalytic system offers great advantages for sustainable chemical transformations and renewable energy conversion. In this study, we investigate an efficient photocatalytic methanol dehydrogenation with controlled selectivity by varying the concentration of nickel cocatalyst, using zinc indium sulfide nanocrystals as a semiconductor photocatalyst, which enables the production of either formaldehyde or ethylene glycol with high selectivity. Control experiments revealed that formaldehyde is initially generated and can either serve as a terminal product or intermediate in producing ethylene glycol, depending on the nickel concentration in the solution. Mechanistic studies suggest a unique role of ionic nickel as an additional photoelectron competitor that can significantly influence selectivity, alongside its well-established function as a hydrogen evolution reaction cocatalyst under photocatalytic conditions. The demonstrated switchable selectivity provides a new tool for producing diverse products from methanol, while advancing the understanding of cocatalyst behavior for versatile catalytic performance.
- 13 January 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (4) , 3428-3437
Photocatalytic Methanol Dehydrogenation with Switchable Selectivity
Switchable selectivity achieved by altering reaction conditions within the same photocatalytic system offers great advantages for sustainable chemical transformations and renewable energy conversion. In this study, we investigate an efficient photocatalytic methanol dehydrogenation with controlled selectivity by varying the concentration of nickel cocatalyst, using zinc indium sulfide nanocrystals as a semiconductor photocatalyst, which enables the production of either formaldehyde or ethylene glycol with high selectivity. Control experiments revealed that formaldehyde is initially generated and can either serve as a terminal product or intermediate in producing ethylene glycol, depending on the nickel concentration in the solution. Mechanistic studies suggest a unique role of ionic nickel as an additional photoelectron competitor that can significantly influence selectivity, alongside its well-established function as a hydrogen evolution reaction cocatalyst under photocatalytic conditions. The demonstrated switchable selectivity provides a new tool for producing diverse products from methanol, while advancing the understanding of cocatalyst behavior for versatile catalytic performance.
- 8 April 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (14)
The surface chemistry of colloidal lead halide perovskite nanowires
This study explored the interplay between the ligand–surface chemistry of colloidal CsPbBr3 nanowires (NWs) and their optical properties. The ligand equilibrium was probed using nuclear magnetic resonance spectroscopy, and by perturbing the equilibrium via dilution, the gradual removal of ligands from the CsPbBr3 surface was observed. This removal was correlated with an increase in the surface defect density, as suggested by a broadening of the photoluminescence (PL) spectrum, a decrease in the PL quantum yield (PLQY), and quenching of the PL decay. These results highlight similar surface binding between the traditional CsPbBr3 quantum dots and our NWs, thereby expanding the scope of well-established ligand chemistry to a relatively unexplored nanocrystal morphology. By controlling the dilution factor, it was revealed that CsPbBr3 NWs achieve a PLQY of 72% ± 2% and a relatively long average PL lifetime of 400 ± 10 ns, without relying on additional surface passivation techniques, such as ligand exchange.
- 8 April 2024
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 160 (14)
The surface chemistry of colloidal lead halide perovskite nanowires
This study explored the interplay between the ligand–surface chemistry of colloidal CsPbBr3 nanowires (NWs) and their optical properties. The ligand equilibrium was probed using nuclear magnetic resonance spectroscopy, and by perturbing the equilibrium via dilution, the gradual removal of ligands from the CsPbBr3 surface was observed. This removal was correlated with an increase in the surface defect density, as suggested by a broadening of the photoluminescence (PL) spectrum, a decrease in the PL quantum yield (PLQY), and quenching of the PL decay. These results highlight similar surface binding between the traditional CsPbBr3 quantum dots and our NWs, thereby expanding the scope of well-established ligand chemistry to a relatively unexplored nanocrystal morphology. By controlling the dilution factor, it was revealed that CsPbBr3 NWs achieve a PLQY of 72% ± 2% and a relatively long average PL lifetime of 400 ± 10 ns, without relying on additional surface passivation techniques, such as ligand exchange.
- 7 December 2023
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (24) , 11469-11476
Energy Funneling in a Noninteger Two-Dimensional Perovskite
Energy funneling is a phenomenon that has been exploited in optoelectronic devices based on low-dimensional materials to improve their performance. Here, we introduce a new class of two-dimensional semiconductor, characterized by multiple regions of varying thickness in a single confined nanostructure with homogeneous composition. This "noninteger 2D semiconductor" was prepared via the structural transformation of two-octahedron-layer-thick (n = 2) 2D cesium lead bromide perovskite nanosheets; it consisted of a central n = 2 region surrounded by edge-lying n = 3 regions, as imaged by electron microscopy. Thicker noninteger 2D CsPbBr3 nanostructures were obtained as well. These noninteger 2D perovskites formed a laterally coupled quantum well band alignment with virtually no strain at the interface and no dielectric barrier, across which unprecedented intramaterial funneling of the photoexcitation energy was observed from the thin to the thick regions using time-resolved absorption and photoluminescence spectroscopy.
- 7 December 2023
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 23 (24) , 11469-11476
Energy Funneling in a Noninteger Two-Dimensional Perovskite
Energy funneling is a phenomenon that has been exploited in optoelectronic devices based on low-dimensional materials to improve their performance. Here, we introduce a new class of two-dimensional semiconductor, characterized by multiple regions of varying thickness in a single confined nanostructure with homogeneous composition. This "noninteger 2D semiconductor" was prepared via the structural transformation of two-octahedron-layer-thick (n = 2) 2D cesium lead bromide perovskite nanosheets; it consisted of a central n = 2 region surrounded by edge-lying n = 3 regions, as imaged by electron microscopy. Thicker noninteger 2D CsPbBr3 nanostructures were obtained as well. These noninteger 2D perovskites formed a laterally coupled quantum well band alignment with virtually no strain at the interface and no dielectric barrier, across which unprecedented intramaterial funneling of the photoexcitation energy was observed from the thin to the thick regions using time-resolved absorption and photoluminescence spectroscopy.
- 20 October 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (17) , 170603
Floquet Prethermalization with Lifetime Exceeding 90 s in a Bulk Hyperpolarized Solid
We report the observation of long-lived Floquet prethermal states in a bulk solid composed of dipolar-coupled nuclei in diamond at room temperature. For precessing nuclear spins prepared in an initial transverse state, we demonstrate pulsed spin-lock Floquet control that prevents their decay over multiple-minute-long periods. We observe Floquet prethermal lifetimes , extended -fold over the nuclear free induction decay times. The spins themselves are continuously interrogated for , corresponding to the application of control pulses. The nuclei are optically hyperpolarized by lattice nitrogen vacancy centers; the combination of hyperpolarization and continuous spin readout yields significant signal-to-noise ratio in the measurements. This allows probing the Floquet thermalization dynamics with unprecedented clarity. We identify four characteristic regimes of the thermalization process, discerning short-time transient processes leading to the prethermal plateau and long-time system heating toward infinite temperature. This Letter points to new opportunities possible via Floquet control in networks of dilute, randomly distributed, low-sensitivity nuclei. In particular, the combination of minutes-long prethermal lifetimes and continuous spin interrogation opens avenues for quantum sensors constructed from hyperpolarized Floquet prethermal nuclei.- 20 October 2021
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 127 (17) , 170603
Floquet Prethermalization with Lifetime Exceeding 90 s in a Bulk Hyperpolarized Solid
We report the observation of long-lived Floquet prethermal states in a bulk solid composed of dipolar-coupled nuclei in diamond at room temperature. For precessing nuclear spins prepared in an initial transverse state, we demonstrate pulsed spin-lock Floquet control that prevents their decay over multiple-minute-long periods. We observe Floquet prethermal lifetimes , extended -fold over the nuclear free induction decay times. The spins themselves are continuously interrogated for , corresponding to the application of control pulses. The nuclei are optically hyperpolarized by lattice nitrogen vacancy centers; the combination of hyperpolarization and continuous spin readout yields significant signal-to-noise ratio in the measurements. This allows probing the Floquet thermalization dynamics with unprecedented clarity. We identify four characteristic regimes of the thermalization process, discerning short-time transient processes leading to the prethermal plateau and long-time system heating toward infinite temperature. This Letter points to new opportunities possible via Floquet control in networks of dilute, randomly distributed, low-sensitivity nuclei. In particular, the combination of minutes-long prethermal lifetimes and continuous spin interrogation opens avenues for quantum sensors constructed from hyperpolarized Floquet prethermal nuclei.