YSYuan-Hong Song

Yuan-Hong Song

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuan-Hong Song has a total of 106 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effects of the Driving Voltage Amplitude and Phase on the Standing Wave Effect and Plasma Uniformity in Large‐Area Capacitively Coupled Plasmas Operated in SiH 4 /H 2

    by Yi‐Fan Zhang, Wen‐Zhu Jia, Wan Dong, Julian Schulze, Yuan‐Hong Song

    Standing wave effects are a major factor limiting the uniformity of large‐area capacitively coupled plasmas used for PECVD, but are usually described by the radial voltage amplitude variation alone. Using a two‐dimensional fluid model coupled with an electromagnetic transmission line model, we show that in strongly electronegative SiH 4 /H 2 discharges at 27.12 MHz and several Torr the standing wave effect still plays an important role, governed by both the voltage amplitude and the phase angle between the local potential at the plasma‐facing surface of the powered electrode and the potential at the power‐feed position. The radial phase variation drives vortex‐like electron transport, locally enhances ionization, and alters the SiH 3 and H fluxes and deposition rates at both electrodes.

  • Effects of impedance matching on the operation mode of a capacitively coupled argon radio-frequency discharge

    by Xingzhao Jiang, Peter Hartmann, Zoltán Donkó, Li Wang, Yuan-Hong Song, Julian Schulze

    In radio frequency plasma experiments, external matching networks are essential for power delivery, while perfect matching is not always achievable in practice. Often L-type matching networks are used, consisting of a tunable parallel capacitor, a fixed serial inductance and a tunable serial capacitor. The influence of such a matching network on capacitively coupled plasmas is investigated for a representative argon discharge at 30 Pa, 13.56 MHz, and V rf,0 = 125 V, using a kinetic plasma simulation coupled self-consistently with a model of the external circuit, with particular emphasis on the effects of tuning the serial and parallel capacitors on the mode of plasma operation and process relevant plasma parameters. Tuning the serial capacitor near its ideal value is found to strongly influence the power transferred to the plasma and to modify the mode of plasma operation, the sheath electric field and particle energy distributions. Variations of the parallel capacitor, in contrast, affect the power dissipation in the plasma only to a minor extent. These results show that and explain how matching conditions control not only the total power dissipated in the plasma, but also its distribution as a function of spatial position and time within the RF period through its effects on the discharge mode. These results are relevant for experiments, which often operate under imperfect matching conditions.

  • Temporal mode transitions in attachment induced instabilities of electronegative capacitively coupled radio frequency discharges

    by Chongbiao Tian, Li Wang, Mate Vass, Xiao-Kun Wang, Wan Dong, Yuan-Hong Song, Julian Schulze

    In capacitively coupled radio frequency plasmas sustained in electronegative gases, ionization-attachment feedback can induce periodic discharge instabilities. Based on particle-in-cell simulations of oxygen plasmas combined with a diffusion model, we demonstrate that such instabilities are accompanied by self-induced temporal mode transitions of the electron power absorption mode between the α-, Detachment Induced/γ-, and Drift-Ambipolar-modes. While the radio frequency period averaged ion energy and ion flux at the electrodes are insensitive to the instability and increase monotonically with increasing driving voltage, the atomic oxygen production is found to be sensitive to such periodic temporal mode transitions, with its production rate exhibiting a pronounced non-monotonic dependence on the driving voltage. These phenomena are explained by the effects of such temporal mode transitions on the spatio-temporal electric field structure and electron kinetics.

  • Open Access

    Magnetically induced formation and disruption of striations in capacitively coupled radio-frequency CF 4 plasmas

    by Li Wang, A. Derzsi, Peter Hartmann, Zoltán Donkó, Maximilian Alexander Ryppa, Constantin Neuroth, Florian Beckfeld, Wan Dong, Yuan-Hong Song, Julian Schulze

    The influence of externally applied homogeneous transverse magnetic fields of up to 200 G on self-organized striations in capacitively coupled radio-frequency CF 4 plasmas is investigated using kinetic simulations. The striations are known to originate from a resonance between the applied radio-frequency and the eigenfrequency of the ion-ion plasma, the magnetic field is found to affect the striations indirectly through its impact on electron dynamics as ions do not get magnetized within the range of magnetic fields covered. Depending on the discharge conditions, increasing the magnetic field can either switch striations on or off and, in this way, strongly affect the spatial electron energy distribution function as well as the generation of process relevant charged and neutral species. We demonstrate that at some discharge conditions where striations form in the absence of a magnetic field, applying a moderate B-field can lead to the suppression of striations near the discharge center as a result of enhanced electron power absorption and a corresponding increase in electron density, enabling electrons to neutralize the space charge caused by the ion oscillations. We also illustrate the opposite effect that can occur at some other operating conditions, where the plasma operates close to the striation regime, but striations are absent due to insufficient ion densities, the magnetic field enhances the ion density and amplifies the local space charge formation, which can no longer be balanced by electrons. As a result, striations appear, inducing a transition from the drift ambipolar to a striation/magnetized drift ambipolar hybrid mode.


  • Open Access

    The effect of surface quenching coefficients of $O_2(a^{1}Δg)$ and $O_2(b^{1}Σg^{+})$ on capacitively coupled $Ar$/$O_2$ discharge: A global/equivalent circuit model study

    by Wan Dong, Yi Wang, Yi-Fan Zhang, Yuan-Hong Song

    Capacitively coupled discharges operated in mixtures of $Ar$ and $O_2$ are extensively utilized in plasma etching and deposition processes due to the oxidative properties and precursor functionality of the reactive species produced in the discharge. In $Ar$/$O_2$ discharges, the surface quenching coefficient of $O_2(a^{1}Δg)$ is known to affect this metastable density, which, in turn, affects the electronegativity and other important plasma characteristics. In this work, in addition to $O_2(a^{1}Δg)$, $O_2(b^{1}Σg^{+})$ and its associated reactions are incorporated into a global/equivalent circuit model of an $Ar$/$O_2$ discharge. By independently adjusting the quenching coefficients of both metastable species, changes of these surface coefficients are found to significantly affect the discharge characteristics, indicating that the role of $O_2(b^{1}Σg^{+})$ cannot be neglected. The effects of their respective surface quenching coefficients of these metastables based on various wall materials on the discharge are revealed including their effects on different particle species densities, plasma impedance, voltage drops across the sheaths, as well as plasma power absorption.

  • Simulation study of mode transitions induced by external control parameters in capacitively coupled oxygen discharges

    by Chong-Biao Tian, Li Wang, Máté Vass, Xiao-Kun Wang, Wan Dong, Yuan-Hong Song, Julian Schulze

    In capacitively coupled radio frequency discharges, plasma parameters such as the densities of reactive radicals, ions, and electrons are strongly affected by the spatio-temporally resolved electron power absorption dynamics and the electron energy distribution function. These, in turn, are determined by the electron power absorption mode of the discharge. In oxygen gas, various modes of operation, e.g. the α-, drift-ambipolar (DA), and γ-mode, as well as mode transitions among them induced by external control parameters such as driving voltage and pressure are known. In 2012, Dittmann et al (Dittmann et al 2012 Plasma Phys. Control. Fusion 54 124038) discovered another electron power absorption mode, where electrons are generated via detachment from O − ions inside the sheaths, accelerated towards the bulk by the sheath electric field and collisionally multiplied, similar to secondary electrons. This new electron heating mode was called detachment-induced (DI) mode in a later computational study (Tian et al 2024 Plasma Sources Sci. Technol. 33 075008). In this work, kinetic plasma simulations are performed to investigate the effects of pressure, voltage, and secondary electron emission coefficients of the electrodes on mode transitions into and out of the DI-mode. Increasing the pressure is found to induce transitions from the DA- to the α-, and subsequently to the γ- and DI-mode. Increasing the driving voltage amplitude leads to transitions from the DA- to the DI- and finally to the γ-mode. Higher secondary electron emission coefficients suppress the DI-mode. These mode transitions are explained at the kinetic level and found to affect the ion flux to the electrodes and the atomic oxygen generation in the plasma volume.


  • Open Access

    Electron power absorption dynamics and uniformity control in capacitive RF plasmas driven by planar segmented electrodes

    by Li Wang, Peter Hartmann, Zoltán Donkó, Yuan-Hong Song, Julian Schulze

    The effects of segmenting the powered electrode into multiple individually RF driven electrodes on the radial plasma uniformity control in capacitive plasmas is investigated based on two-dimensional kinetic simulations. At moderate pressures, where density peaks arise at the electrode edge due to enhanced local electron heating, the plasma uniformity is significantly improved by employing segmented electrodes and applying a higher voltage amplitude to the central powered electrode relative to the outer ring electrode. In contrast, at low pressures, at which non-local electron dynamics dominates and a center-high density profile forms, increasing the voltage amplitude at the outer ring electrode fails to enhance uniformity. This is caused by the pronounced radial electron transport during the phase of sheath expansion at the powered electrodes. Due to the sheath potential difference at each electrode segment, electrons above the outer ring electrode experience not only upward acceleration, but also a strong inward radial acceleration during sheath expansion, which further increases the plasma density at the center and reduces the uniformity. Instead of setting different voltage amplitudes, increasing the driving frequency at the outer ring electrode is found to significantly enhance electron heating above this electrode segment via more frequent and rapid sheath oscillations, leading to improved plasma uniformity. Furthermore, the impact of segmented electrodes on the radial uniformity of the ion energy and incidence angle at the electrode surface is examined. Applying different voltage amplitudes to the electrode segments is found to induce substantial radial nonuniformities of the mean ion energy and incidence angle, whereas applying different frequencies to each segment maintains uniformity of these parameters under the discharge conditions studied in this work.


  • Simulation of standing wave effects in large-area capacitively coupled silane mixture discharges using a 2D fluid coupled with a transmission line model

    by Yi-Fan Zhang, Wan Dong, Wen-Zhu Jia, Julian Schulze, Yuan-Hong Song

    Radio frequency capacitively coupled plasmas (RF CCPs) are widely used in the solar cell industry. With the increase of the chamber size and driving frequency, for the purpose of higher production efficiency, radial uniformity problems become more rigorous and deserve more attention and in-depth studies. A two-dimensional (2D) fluid model coupled with an electromagnetic transmission line model is used to study a capacitively coupled discharge operated in a mixture of silane/hydrogen and is driven by a single RF source at 27.12 MHz, which is typical for microcrystalline silicon deposition processes. The 2D geometric structure of the chamber includes electrodes with the radius of 140 cm and thickness of 1 cm, while the gap between the electrodes is 1.6 cm. An increase in pressure from 1 to 4 Torr is found to lead to a reduction in the uniformity of the radial potential amplitude distribution on the powered electrode, indicating a shortening of the electromagnetic wave wavelength. At higher pressures, the electron density exhibits a pronounced peak near the radial discharge center, resulting in non-uniform radial density distributions of ions, radicals, as well as film thickness. The simulated trend in film thickness distribution changes is in agreement with the experiments, which both show a deterioration in uniformity and the deposition rate does not increase at higher pressures. The density distributions of electrons and positive ions are primarily related to their generation rates as well as axial transport. However, radial transport phenomena are more important for negative ions, especially near the electrode edges at which a negative ion density peak is observed, although the local negative ion generation rate is very low. Detailed analyses regarding the electron and ion transport, as well as the reactions of radicals are presented to understand the internal physical mechanisms in this large area RF CCP.


  • Multiscale Simulation of Capacitively Coupled Ar/CHF 3 Discharges Driven by Sawtooth‐Tailored Voltage Waveforms

    by Wan Dong, Liu‐Qin Song, Yi‐Fan Zhang, Li Wang, Yuan‐Hong Song, Julian Schulze

    Multiscale simulation in capacitively coupled Ar/CHF 3 plasmas driven by sawtooth‐up waveforms are conducted based on a one‐dimensional fluid/Monte‐Carlo (MC) model coupled with an etching profile evolution model. By increasing numbers of consecutive harmonics, N , a transition of the discharge mode from the Drift‐Ambipolar (DA) to an α‐DA hybrid mode can be observed. As the CHF 3 gas admixture increases, the electronegativity initially increases and then decreases, following a similar trend as the absolute value of the DC self‐bias voltage. Moreover, placing the substrate on the grounded electrode of a geometrically symmetric reactor and using a higher N can result in a higher etching rate, since ion fluxes are higher in these scenarios. Additionally, selecting an appropriate gas mixture is also essential.


  • Open Access

    Plasma uniformity control in capacitive RF discharges by an individually RF driven sidewall electrode

    by Li Wang, Peter Hartmann, Zoltán Donkó, Yuan-Hong Song, Julian Schulze

    A novel method of uniformity control in low pressure capacitively coupled radio-frequency plasmas by an individually driven sidewall electrode is proposed and verified by two-dimensional kinetic simulations. At the sidewall electrode, energetic electron beams are generated by sheath expansion heating and propagate radially towards the reactor center. Upon reaching the edge of the planar powered electrode, where the wafer is located in plasma processing applications, they interact with the time-modulated RF sheath at this electrode. Depending on the amplitudes of and the phase shift between the voltage waveforms applied to the sidewall and the wafer electrode at the same frequency, they reach the wafer electrode edge at different times within one period of the local sheath oscillation. If the radially propagating beam electrons arrive at the wafer electrode edge, when the local sheath is thick, they will be accelerated upwards and cause significant local ionization peaks at the wafer electrode edge. This effect is demonstrated to improve the radial plasma uniformity at low pressures drastically, if a center high plasma density profile is present in the absence of an RF driven sidewall electrode. If the beam electrons arrive at the wafer electrode edge, when the local sheath is collapsed, they will continue propagating radially towards the center and the effect on the uniformity will be reduced. Thus, the voltage amplitude applied to the sidewall electrode and its phase relative to the RF voltage applied to the planar powered electrode are found to be effective parameters to electrically control the radial plasma uniformity above the wafer.