VKVasily Kikeev

Vasily Kikeev

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vasily Kikeev has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Producing aluminum matrix composite reinforced with decorated multi-walled carbon nanotubes

    by A. D. Romanov, E. A. Romanova, A. A. Mironov, V. A. Kikeev, A. M. Obiedkov, Ilya V. Vilkov

  • Calculation of impact of asymmetry of the loading cycle on fatigue crack growth in the near-threshold regime

    by А.а. Миронов, В.а. Кикеев

    Предложен расчетный метод описания эффекта влияния асимметрии нагружения на скорость роста усталостных трещин (РУТ). Метод включает аналитическую модель РУТ и модель зависимости порогового коэффициента интенсивности напряжений от коэффициента асимметрии цикла нагружения. Модель РУТ построена на основе теории накопления повреждений при циклическом деформировании в вершине трещины. В качестве меры повреждения принята величина относительной остаточной объемной деформации (разрыхления) материала. Связь порогового коэффициента интенсивности напряжений с коэффициентом асимметрии цикла нагружения получена на основе зависимости придела усталости от среднего напряжения цикла. Используются экспериментальные данные РУТ при одном значении асимметрии нагружения. Кинетические диаграммы РУТ для произвольных значений коэффициентов асимметрии строятся аналитически. Приведено сравнение расчетных и экспериментальных диаграмм РУТ для ряда сталей и сплавов, приведенных в публикациях других авторов. Метод позволяет оценить эффект влияния асимметрии нагружения на скорость РУТ в припороговой области для диапазона коэффициентов асимметрии от 0 до 0,7. A computational method is proposed to describe the effect of loading asymmetry on the rate of fatigue crack growth (FCG). The method includes an analytical model of the FCG and a model of the dependence of the threshold stress intensity factor on the asymmetry coefficient of the loading cycle. The FCG model is based on the theory of damage accumulation during cyclic deformation at the crack tip. The value of the relative residual volumetric deformation (loosening) of the material was taken as a measure of damage. The relationship between the threshold stress intensity factor and the load ratio is obtained based on the dependence of the fatigue gap on the average cycle stress. The experimental data of the FCG are used for a single value of the load asymmetry. Kinetic FCG diagrams for arbitrary values of the load ratios are constructed analytically. A comparison of the calculated and experimental diagrams of the FCG for a number of steels and alloys given in publications by other authors is given. The method allows to evaluate the effect of loading asymmetry on the speed of the FCG in the threshold region for a range of load ratios from 0 to 0.7.


  • Developing a technology for obtaining an aluminum matrix composite reinforced with multi-walled carbon nanotubes

    by A. D. Romanov, E. A. Romanova, A. A. Mironov, V. A. Kikeev, A. M. Obiedkov, B. S. Kaverin, I. V. Vilkov

  • Пластика митрального клапана полоской из аутоперекарда: конечно-элементное моделирование

    by Нижегородский Технический Университет Им. Р.е. Алексеева, Анатолий Миронов, Михаил Рязанов, Специализированная Кардиохирургическая Клиническая Больница Им. Академика Б.а. Королева, Василий Кикеев, Дмитрий Жильцов

    В настоящее время одним из методов лечения ишемической митральной недостаточности, приводящей к регургитации крови, является проведение операции аннулопластики. В медицинской практике распространение получили процедуры MitraClip и установка различного вида колец, обеспечивающих надежность, биосовместимость и высокую технологичность операции. В настоящей работе рассматривается модифицированная аннулопластика с использованием полоски перикарда. Общей проблемой проведения таких операций является прогнозирование их результатов в зависимости от параметров коррекции. Для решения данной задачи используется конечно-элементное моделирование. В рамках проведенного исследования разработана конечно-элементная модель митрального клапана в среде программного продукта LS-DYNA, позволяющая проводить имитацию пластики полоской перикарда. Модель построена с использованием элементов оболочки и включает створки клапана, фиброзное кольцо и хорды. Изменение усилий натяжения хорд и дилатация фиброзного кольца осуществляются соответственно наложением кинематических и силовых граничных условий, которые сохраняются и после проведения операции пластики. Полоска перикарда, пришиваемая к задней части фиброзного кольца, моделируется элементами гибкой нити с возможностью реализации предварительного натяжения. Механические свойства перикарда, использованные при проведении компьютерного моделирования, получены по результатам испытания образцов на растяжение. Представлены результаты вычислительного эксперимента влияния процедуры пластики полоской перикарда на восстановление кооптации створок клапана при наличии дилатации задней части фиброзного кольца. После коррекции по данным диагностики конкретного пациента модель может быть использована для выбора необходимых размеров полоски при проведении операции пластики митрального клапана.

  • Mitral valve plastic surgery with an autopericardial strip: finite element modeling

    by Nizhny Novgorod State Technical University, Anatoly Mironov, Mikhail Ryazanov, Specialized Cardiac Surgical Clinical Hospital, Vasily Kikeev, Dmitry Zhilcov

    Currently, one of the methods of treatment of ischemic mitral insufficiency, leading to blood regurgitation, is annuloplasty surgery. In medical practice, MitraClip procedures and the installation of various types of rings have become widespread, ensuring reliability, biocompatibility and high manufacturability of the operation. In this paper, a modified annuloplasty using a pericardial strip is considered. A common problem of performing such operations is predicting their results depending on the correction parameters. Finite element modeling is used to solve this problem. As part of the study, a finite element model of the mitral valve was developed in the environment of the LS-DYNA software product, which allows for imitation of plastic surgery with a pericardial strip. The model is constructed using shell elements and includes valve flaps, a fibrous ring and chords. The change in the tension forces of the chords and the dilation of the fibrous ring are carried out respectively by the imposition of kinematic and force boundary conditions, which persist even after the plastic surgery. The pericardial strip, sewn to the back of the fibrous ring, is modeled by elements of a flexible thread with the possibility of pre-tensioning. The mechanical properties of the pericardium used in computer modeling were obtained from the results of tensile testing of samples. The results of a computational experiment of the effect of the pericardial strip plasty procedure on the restoration of valve leaf co-optation in the presence of dilation of the posterior part of the fibrous ring are presented. After correction according to the diagnostic data of a particular patient, the model can be used to select the necessary strip sizes during mitral valve repair surgery.

  • Open Access

    The Spectrum of Supersonic Flow Around an Aircraft with Control Brake Shields

    by S.I. Gerasimov, A.A. Glukhov, V.A. Kikeev, I.YU. Smirnov, K.V. Totyshev

    The article presents the results of the study of the spatial flow pattern of the aircraft model, the study of the flow structure near the surface of the aircraft by experimental and numerical methods. Comparative materials for visualizing flows around a conical model with a stern control body – a flat end shield during supersonic flight in atmospheric pressure air are presented. The difference from the qualitative flow pattern according to experimental spectra at M≈4 and M≈5.5 lies in the presence, in addition to the formation of a breakaway flow zone in front of the shield, an oblique jump of the seal (from the point of separation of the flow) and a more intense direct jump of the seal, the possibility of the appearance of a flow separation zone induced by the shield on the side of the model surface opposite the shield, with the formation of an oblique jump of the seal. The efficiency of increasing the number of brake shields installed on the cylindrical-conical model is considered. The results of measurements of the dependence of the increments of the drag coefficient of the tested models on the area of the shields are presented.


  • Variant of constructing a two-criterion diagram of the failure of cylindrical shells with cracks

    by А.а. Миронов, В.а. Кикеев

    Рассмотрены условия разрушения цилиндрических оболочек с продольными поверхностными трещинами, нагруженных внутренним давлением. Решение задачи основано на использовании двухкритериального подхода к оценке разрушения конструкций с трещинами, в рамках которого строится двухкритериальная диаграмма разрушения. В качестве критерия хрупкого разрушения конструкции с трещиной используется критерий Дж. Ирвина. В качестве параметра, определяющего нагрузку предельного состояния при вязком разрушении, предложено использовать мембранную составляющую критического раскрытия трещины. Раскрытие трещины определяется в рамках модели пластической зоны по Дагдейлу. В качестве уравнения, аппроксимирующего двухкритериальную диаграмму разрушения, описывающую области хрупкого, квазихрупкого и вязкого разрушений, принята зависимость по стандарту BS 7910. Показано хорошее совпадение расчетных и экспериментальных данных по разрушению труб и сосудов давления с поверхностными трещинами. The conditions of the failure of cylindrical shells with longitudinal surface cracks loaded with internal pressure are considered. The solution of the problem is based on the usage of a two-criteria approach to assessing the failure of structures with cracks. A two-criteria fracture diagram was constructed within the framework of the approach. J. Irwin's criterion is used as a criterion for brittle fracture of a structure with a crack. It is proposed to use the membrane component of the critical crack opening as a parameter that determines the limit state load in ductile fracture. Fracture opening is determined within the Dugdale’s model of plastic zone. The dependence according to the BS 7910 standard was adopted as an approximating equation the two-criterion fracture diagram, which describes the areas of brittle, quasi-brittle and viscous destruction. There is a good agreement between the calculated and experimental data on the fracture of pipes and pressure vessels with surface cracks.

  • Possibility of Using Ballistic Missile Launchers in the Study of Shock-Compressed Substance Properties

    by S. I. Gerasimov, V. I. Erofeev, I. V. Zanegin, V. A. Kikeev, A. P. Kalmykov, E. G. Kosyak, P. G. Kuznetsov, N. V. Lapichev

    The paper describes ballistic test site equipment used for studying the physical and mechanical properties of materials exposed to intense dynamic loads. To study the properties of shock-compressed substances, explosive shock wave generators based on powerful condensed explosives are used. The methods of dispersal of the used strikers in different throwing modes with different types of guns are briefly described. The methodological development in cannon experiments on light-gas guns is given, in which the conditions of safe acceleration of the strikers in the barrels of the guns and the loading parameters of the latter which provide the required collision speeds of the striker and the target are confirmed. Numerical and experimental results of testing the selected throwing modes are presented.

  • On the development of aeroballistic experiment techniques for flow visualization

    by S.I. Gerasimov, V.I. Erofeev, V.A. Kikeev, K.V. Totyshev, E. G. Kosyak, P. G. Kuznetsov, R.V. Gerasimova