Yuhao Wang
Yuhao Wang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hao Yu
Nanyang Technological University, Singapore
3 shared publications - Chip-Hong Chang
Nanyang technological university, Singapore, Singapore
1 shared publication - Chun Zhang
Department of Physics, National University of Singapore, 3 Science Drive 3, Singapore 117543, Singapore
1 shared publication Leibin Ni
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore
1 shared publication- Leibin Ni
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798
1 shared publication Revanth Nadipalli
School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798
1 shared publication
Latest Publications
- 1 December 2016
- Published by Springer Nature in Synthesis Lectures on Emerging Engineering Technologies
- Vol. 2 (7) , 1-161
Non-Volatile In-Memory Computing by Spintronics
Exa-scale computing needs to re-examine the existing hardware platform that can support intensive data-oriented computing. Since the main bottleneck is from memory, we aim to develop an energy-efficient in-memory computing platform in this book. First, the models of spin-transfer torque magnetic tunnel junction and racetrack memory are presented. Next, we show that the spintronics could be a candidate for future data-oriented computing for storage, logic, and interconnect. As a result, by utilizing spintronics, in-memory-based computing has been applied for data encryption and machine learning. The implementations of in-memory AES, Simon cipher, as well as interconnect are explained in details. In addition, in-memory-based machine learning and face recognition are also illustrated in this book. Table of Contents: Preface / Acknowledgments / Introduction / Non-volatile Spintronic Device and Circuit / In-memory Data Encryption / In-memory Data Analytics / Authors' Biographies
- 1 December 2016
- Published by Springer Nature in Synthesis Lectures on Emerging Engineering Technologies
- Vol. 2 (7) , 1-161
Non-Volatile In-Memory Computing by Spintronics
Exa-scale computing needs to re-examine the existing hardware platform that can support intensive data-oriented computing. Since the main bottleneck is from memory, we aim to develop an energy-efficient in-memory computing platform in this book. First, the models of spin-transfer torque magnetic tunnel junction and racetrack memory are presented. Next, we show that the spintronics could be a candidate for future data-oriented computing for storage, logic, and interconnect. As a result, by utilizing spintronics, in-memory-based computing has been applied for data encryption and machine learning. The implementations of in-memory AES, Simon cipher, as well as interconnect are explained in details. In addition, in-memory-based machine learning and face recognition are also illustrated in this book. Table of Contents: Preface / Acknowledgments / Introduction / Non-volatile Spintronic Device and Circuit / In-memory Data Encryption / In-memory Data Analytics / Authors' Biographies
- 7 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 11 (11) , 2426-2440
DW-AES: A Domain-Wall Nanowire-Based AES for High Throughput and Energy-Efficient Data Encryption in Non-Volatile Memory
Big-data storage poses significant challenges to anonymization of sensitive information against data sniffing. Not only will the encryption bandwidth be limited by the I/O traffic, the transfer of data between the processor and the memory will also expose the input-output mapping of intermediate computations on I/O channels that are susceptible to semi-invasive and non-invasive attacks. Limited by the simplistic cell-level logic, existing logic-in-memory computing architectures are incapable of performing the complete encryption process within the memory at reasonable throughput and energy efficiency. In this paper, a block-level in-memory architecture for advanced encryption standard (AES) is proposed. The proposed technique, called DW-AES, maps all AES operations directly to the domain-wall nanowires. The entire encryption process can be completed within a homogeneous, high-density, and standby-power-free non-volatile spintronic-based memory array without exposing the intermediate results to external I/O interface. Domain-wall nanowire-based pipelining and multi-issue pipelining methods are also proposed to increase the throughput of the baseline DW-AES with an insignificant area overhead and negligible difference on leakage power and energy consumption. The experimental results show that DW-AES can reduce the leakage power and area by the orders of magnitude compared with existing CMOS ASIC accelerators. It has an energy efficiency of 22 pJ/b, which is 5× and 3× better than the CMOS ASIC and memristive CMOL-based implementations, respectively. Under the same area budget, the proposed DW-AES achieves 4.6× higher throughput than the latest CMOS ASIC AES with similar power consumption. The throughput improvement increases to 11× for pipelined DW-AES at the expense of doubling the power consumption.
- 7 June 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 11 (11) , 2426-2440
DW-AES: A Domain-Wall Nanowire-Based AES for High Throughput and Energy-Efficient Data Encryption in Non-Volatile Memory
Big-data storage poses significant challenges to anonymization of sensitive information against data sniffing. Not only will the encryption bandwidth be limited by the I/O traffic, the transfer of data between the processor and the memory will also expose the input-output mapping of intermediate computations on I/O channels that are susceptible to semi-invasive and non-invasive attacks. Limited by the simplistic cell-level logic, existing logic-in-memory computing architectures are incapable of performing the complete encryption process within the memory at reasonable throughput and energy efficiency. In this paper, a block-level in-memory architecture for advanced encryption standard (AES) is proposed. The proposed technique, called DW-AES, maps all AES operations directly to the domain-wall nanowires. The entire encryption process can be completed within a homogeneous, high-density, and standby-power-free non-volatile spintronic-based memory array without exposing the intermediate results to external I/O interface. Domain-wall nanowire-based pipelining and multi-issue pipelining methods are also proposed to increase the throughput of the baseline DW-AES with an insignificant area overhead and negligible difference on leakage power and energy consumption. The experimental results show that DW-AES can reduce the leakage power and area by the orders of magnitude compared with existing CMOS ASIC accelerators. It has an energy efficiency of 22 pJ/b, which is 5× and 3× better than the CMOS ASIC and memristive CMOL-based implementations, respectively. Under the same area budget, the proposed DW-AES achieves 4.6× higher throughput than the latest CMOS ASIC AES with similar power consumption. The throughput improvement increases to 11× for pipelined DW-AES at the expense of doubling the power consumption.
- 1 January 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design exploration of 3D stacked non-volatile memory by conductive bridge based crossbar
Non-volatile memory (NVM) is one recent promising solution to build the next generation of memory system. Compared to other non-volatile devices such as flash, phase-change random-access-memory (PCRAM), memristor and etc., the emerging conductive-bridge random-access-memory (CBRAM) has shown advantages in accessing speed, power and endurance. In this paper, design of 3D-stacked NVM is explored with the use of CBRAM-crossbar. Specifically, accurate performance modeling of CBRAM-crossbar structure is studied within the corresponding design platform developed at device and system levels. Experiments show that, compared to PCRAM, the proposed CBRAM-crossbar based memory achieves 10x~100x faster accessing time, at least 100x less operation power, and 100x longer endurance.
- 1 January 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Design exploration of 3D stacked non-volatile memory by conductive bridge based crossbar
Non-volatile memory (NVM) is one recent promising solution to build the next generation of memory system. Compared to other non-volatile devices such as flash, phase-change random-access-memory (PCRAM), memristor and etc., the emerging conductive-bridge random-access-memory (CBRAM) has shown advantages in accessing speed, power and endurance. In this paper, design of 3D-stacked NVM is explored with the use of CBRAM-crossbar. Specifically, accurate performance modeling of CBRAM-crossbar structure is studied within the corresponding design platform developed at device and system levels. Experiments show that, compared to PCRAM, the proposed CBRAM-crossbar based memory achieves 10x~100x faster accessing time, at least 100x less operation power, and 100x longer endurance.