Christoph Sunder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christoph Sunder has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Alois Zoitl
CDL VaSiCS, LIT CPS Lab, Johannes Kepler University Linz, Linz, Austria
6 shared publications - Thomas Strasser
AIT Austrian Institute of Technology
6 shared publications - Bernard Favre-Bulle
Technische Universität Wien
3 shared publications - Valeriy Vyatkin
Department of Electrical and Computer Engineering, University of Auckland, Auckland, New Zealand
3 shared publications - James. H. Christensen
Rockwell Automation Advanced Technlogy, Cleveland, USA; Holobloc Inc., Cleveland, USA
2 shared publications - Marco Colla
SUPSI - University of Applied Science, CIMSI Institute, Switzerland
2 shared publications
Latest Publications
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1163-1168
Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration
The IEC 61499 standard-"Function Blocks"- provides a basic device management, the corresponding services and a defined interface for the (re-)configuration of control applications for Industrial Process Measurement and Control Systems (IPMCS). This paper present an approach for an enhanced device management for IEC 61499 compliant control devices. Based on a general consideration, a categorization of basic reconfiguration services is provided. This enables the execution of more sophisticated reconfiguration tasks in a distributed automation and control system. We present such a reconfiguration application by use of a reconfiguration control application.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1163-1168
Enhanced IEC 61499 Device Management Execution and Usage for Downtimeless Reconfiguration
The IEC 61499 standard-"Function Blocks"- provides a basic device management, the corresponding services and a defined interface for the (re-)configuration of control applications for Industrial Process Measurement and Control Systems (IPMCS). This paper present an approach for an enhanced device management for IEC 61499 compliant control devices. Based on a general consideration, a categorization of basic reconfiguration services is provided. This enables the execution of more sophisticated reconfiguration tasks in a distributed automation and control system. We present such a reconfiguration application by use of a reconfiguration control application.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1143-1149
A Device and Resource Execution Model for IEC 61499 Control Devices
The standard IEC 61499 claims to be a standard for a distributed control environment consisting of a set of heterogeneous control devices from different vendors. Previous research work on the implementation of IEC 61499 pointed out so-called loopholes in the definitions of the standard resulting in different execution behaviour on different control devices. One of the key loopholes that have been identified is the lack of a definition for execution models of the device and the resource. With this work a step towards a more rigid definition of the execution semantics for IEC 61499 through the derivation of execution models for resources and devices.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1143-1149
A Device and Resource Execution Model for IEC 61499 Control Devices
The standard IEC 61499 claims to be a standard for a distributed control environment consisting of a set of heterogeneous control devices from different vendors. Previous research work on the implementation of IEC 61499 pointed out so-called loopholes in the definitions of the standard resulting in different execution behaviour on different control devices. One of the key loopholes that have been identified is the lack of a definition for execution models of the device and the resource. With this work a step towards a more rigid definition of the execution semantics for IEC 61499 through the derivation of execution models for resources and devices.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1083-1088
Future scenarios for application of downtimeless reconfiguration in industrial practice
This paper intends to give an overview of possible application scenarios for next generation distributed automation and control systems based on the possibility of downtimeless reconfiguration. The basis for this paper is provided by the research project epsivCEDAC, wherein a sophisticated method for downtimeless system evolution is being developed. Domain experts from different industry branches characterize the strengths of this new approach and how they can help their company overcome typical problems of their domain insufficiently solved by current technology. The described application scenarios thereby range from the field of metallurgical plants over building automation and energy supply to engineering tool development.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1083-1088
Future scenarios for application of downtimeless reconfiguration in industrial practice
This paper intends to give an overview of possible application scenarios for next generation distributed automation and control systems based on the possibility of downtimeless reconfiguration. The basis for this paper is provided by the research project epsivCEDAC, wherein a sophisticated method for downtimeless system evolution is being developed. Domain experts from different industry branches characterize the strengths of this new approach and how they can help their company overcome typical problems of their domain insufficiently solved by current technology. The described application scenarios thereby range from the field of metallurgical plants over building automation and energy supply to engineering tool development.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1077-1082
Downtimeless System Evolution: Current State and Future Trends
Recent studies report a growing demand for downtimeless evolution of distributed automation systems. This paper therefore first analyzes evolution approaches from the industry as well as from academic research pointing out benefits and drawbacks. The standard IEC 61499 is identified as promising basis for dynamic reconfiguration of control applications, but it lacks for an adequate engineering methodology. Finally the epsivCEDAC approach for structured evolution modeling is presented. Therein a distributed evolution control application modeled in terms of IEC 61499 is used for transforming the control application from current to desired state without downtime. Further important issues are correctness of the evolution process and runtime error handling mechanisms.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1077-1082
Downtimeless System Evolution: Current State and Future Trends
Recent studies report a growing demand for downtimeless evolution of distributed automation systems. This paper therefore first analyzes evolution approaches from the industry as well as from academic research pointing out benefits and drawbacks. The standard IEC 61499 is identified as promising basis for dynamic reconfiguration of control applications, but it lacks for an adequate engineering methodology. Finally the epsivCEDAC approach for structured evolution modeling is presented. Therein a distributed evolution control application modeled in terms of IEC 61499 is used for transforming the control application from current to desired state without downtime. Further important issues are correctness of the evolution process and runtime error handling mechanisms.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 853-859
Formal description of an IEC 61499 runtime environment with real-time constraints
This paper investigates on the introduction of the runtime behavior and real-time constraints into the verification process of IEC 61499 based automation systems. In detail, the event propagation policies as well as the necessary execution time for all actions within the automation system need to be described for a complete model of the automation system. The basis of the formal description provides an analytic methodology for the event propagation policy of an IEC 61499 runtime implementation. By use of this methodology within the formal model of the runtime environment, the overall system behavior can be described also in the case of reactive systems properties.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 853-859
Formal description of an IEC 61499 runtime environment with real-time constraints
This paper investigates on the introduction of the runtime behavior and real-time constraints into the verification process of IEC 61499 based automation systems. In detail, the event propagation policies as well as the necessary execution time for all actions within the automation system need to be described for a complete model of the automation system. The basis of the formal description provides an analytic methodology for the event propagation policy of an IEC 61499 runtime implementation. By use of this methodology within the formal model of the runtime environment, the overall system behavior can be described also in the case of reactive systems properties.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1169-1175
Execution Models for the IEC 61499 elements Composite Function Block and Subapplication
The semantic loopholes of the standard IEC 61499 have been pointed out in different recent publications with focus on some details. This paper investigates especially on the execution models for composite function blocks and subapplications. Of course this is closely related to the execution of basic function blocks and function block networks. Therefore, this work is based on general assumptions about these parts. The different possibilities concerning composite function blocks are described in detail and explained in a case study of a very simple example function block. For the sake of describing the relation to current runtime environments, three current implementations are used in the case study.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (19354576) , 1169-1175
Execution Models for the IEC 61499 elements Composite Function Block and Subapplication
The semantic loopholes of the standard IEC 61499 have been pointed out in different recent publications with focus on some details. This paper investigates especially on the execution models for composite function blocks and subapplications. Of course this is closely related to the execution of basic function blocks and function block networks. Therefore, this work is based on general assumptions about these parts. The different possibilities concerning composite function blocks are described in detail and explained in a case study of a very simple example function block. For the sake of describing the relation to current runtime environments, three current implementations are used in the case study.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1133-1136
Towards an Approach for the Verification of Downtimeless System Evolution
This paper presents ongoing work focused on dynamic reconfiguration of industrial automation systems as a part of their total life cycle. Modification of the control logic has to be enabled at runtime and without any disturbances of related applications. The epsivCEDAC engineering cycle for dynamic system evolution is based on the use of an IEC 61499 reconfiguration application responsible for the dynamic transformation of the program during its execution. The verification of this evolution step takes the central role in this engineering cycle. The paper discusses the general requirements for this kind of verification. Especially the capabilities of the automation system - the used hardware and software - form a major point. The paper describes the basic concepts and ongoing work regarding the verification of downtimeless system evolution.
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1133-1136
Towards an Approach for the Verification of Downtimeless System Evolution
This paper presents ongoing work focused on dynamic reconfiguration of industrial automation systems as a part of their total life cycle. Modification of the control logic has to be enabled at runtime and without any disturbances of related applications. The epsivCEDAC engineering cycle for dynamic system evolution is based on the use of an IEC 61499 reconfiguration application responsible for the dynamic transformation of the program during its execution. The verification of this evolution step takes the central role in this engineering cycle. The paper discusses the general requirements for this kind of verification. Especially the capabilities of the automation system - the used hardware and software - form a major point. The paper describes the basic concepts and ongoing work regarding the verification of downtimeless system evolution.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 12-17
Hierarchical Control Modelling Architecture for Modular Distributed Automation Systems
Modern design approaches for manufacturing system organize the control architecture in the same way as the functional structure of the plant. This leads to a modular approach that is based on composition of automation components. This paper introduces a hierarchical architecture that is based on a generic internal structure of automation components. This includes logic, diagnostics as well as human machine interface (HMI). The HMI architecture is again organized in the same way as the functional structure of the plant. This results in a clear modelling process enabling reduced engineering effort and simple maintenance. It can also serve as a basic architecture for reconfiguration approaches.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 12-17
Hierarchical Control Modelling Architecture for Modular Distributed Automation Systems
Modern design approaches for manufacturing system organize the control architecture in the same way as the functional structure of the plant. This leads to a modular approach that is based on composition of automation components. This paper introduces a hierarchical architecture that is based on a generic internal structure of automation components. This includes logic, diagnostics as well as human machine interface (HMI). The HMI architecture is again organized in the same way as the functional structure of the plant. This results in a clear modelling process enabling reduced engineering effort and simple maintenance. It can also serve as a basic architecture for reconfiguration approaches.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19354576,p. 31-37
Usability and Interoperability of IEC 61499 based distributed automation systems
Since IEC 61499 has reached the state of an international standard and a substantial body of research results exists the question of the authors as main intention for this paper was: Do the models of IEC 61499 solve all problems when thinking of usability and interoperability in heterogeneous system environments? The main problems discussed within the paper concern to the execution model defined for basic function blocks and the scheduling of events within function block networks.
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19354576,p. 31-37
Usability and Interoperability of IEC 61499 based distributed automation systems
Since IEC 61499 has reached the state of an international standard and a substantial body of research results exists the question of the authors as main intention for this paper was: Do the models of IEC 61499 solve all problems when thinking of usability and interoperability in heterogeneous system environments? The main problems discussed within the paper concern to the execution model defined for basic function blocks and the scheduling of events within function block networks.
- 1 May 2006
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 123 (5) , 191-196
Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems
- 1 May 2006
- Published by Springer Nature in e+i Elektrotechnik und Informationstechnik
- Vol. 123 (5) , 191-196
Advanced use of PLCopen motion control library for autonomous servo drives in IEC 61499 based automation and control systems