ZWZhenlin Wang

Zhenlin Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zhenlin Wang has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A new rock physics model for fractured oil shale reservoirs in Mahu oil field

    by Qi Hongyan, Liu Caiguang, Tang Tingming, Chen Gang, Wang Zhenlin, Li Liang, Luo Qingyong, Tang Genyang

    The exploration of unconventional reservoirs such as oil shale has become a focus of research in the oil/gas industry, but due to the diversity of lithology and structural complexity of shale reservoirs, the study of their rock physics laws is a challenge. By analyzing the physical, lithologic, and fluid characteristics of oil shale reservoirs in the Mahu area of Xinjiang, China, we adopted a variety of effective-medium theories to carry out rock physics modeling. We analyzed the differences in the calculation results of various theoretical models, and finally constructed a set of rock physics modeling processes suitable for oil shale reservoirs. The analysis shows that the calculation results of Voigt-Reuss-Hill (VRH) and Hashin-Shtrikman (HS) average for mixed mineral matrix are very similar, but there are certain differences between the upper and lower bounds calculated by them. The upper and lower bounds of HS average are closer than VRH average. We used the Kuster-Toksoz effective-medium, differential effective-medium (DEM), and self-consistent approximation models to construct the rock skeleton and analyzed the differences of the models. The results of the three models are almost identical, but their assumptions and limitations differ. We used DEM in the final shale model, considering the large porosity and the order of inclusion filling. According to the fracture distribution characteristics of oil shale reservoirs, we used an inclined fracture model to describe the fractures with different structural characteristics. Finally, the established shale rock physics model was used to calculate the actual logging data, and the results of elastic parameters are consistent with the measured data. Through the inversion of the fracture parameters, the inversion results are consistent with the measured results as a whole, indicating that the model has certain applicability to the simulation of oil shale reservoirs.

  • Open Access

    Using Fractal Theory to Study the Influence of Movable Oil on the Pore Structure of Different Types of Shale: A Case Study of the Fengcheng Formation Shale in Well X of Mahu Sag, Junggar Basin, China

    by Hong Zhang, Zhengchen Zhang, Zhenlin Wang, Yamin Wang, Rui Yang, Tao Zhu, Feifei Luo, Kouqi Liu

    This study investigated the influence of movable oil on the pore structure of various shale types, analyzing 19 shale samples from Well X in the Mahu Sag of the Junggar Basin. Initially, X-ray diffraction (XRD) analysis classified the shale samples. Subsequently, the geochemical properties and pore structures of the samples, both pre and post oil Soxhlet extraction, were comparatively analyzed through Total Organic Carbon (TOC) content measurement, Rock-Eval pyrolysis, and nitrogen adsorption experiments. Additionally, fractal theory quantitatively described the impact of movable oil on the pore structure of different shale types. Results indicated higher movable oil content in siliceous shale compared to calcareous shale. Oil extraction led to a significant increase in specific surface area and pore volume in all samples, particularly in siliceous shale. Calcareous shale predominantly displays H2–H3 type hysteresis loops, indicating a uniform pore structure with ink-bottle-shaped pores. Conversely, siliceous shale exhibited diverse hysteresis loops, reflecting its complex pore structure. The fractal dimension in calcareous shale correlated primarily with pore structure, exhibiting no significant correlation with TOC content before or after oil extraction. Conversely, the fractal dimension changes in siliceous shale samples do not have a clear correlation with either TOC content or pore structure, suggesting variations may result from both TOC and pore structure.


  • Open Access

    Characteristics and Formation Stages of Natural Fractures in the Fengcheng Formation of the Mahu Sag, China: Insights from Stable Carbon and Oxygen Isotope and Fluid Inclusion Analysis

    by Wei Wang, Xinhui Xie, Caiguang Liu, Feng Cao, Guoqing Zheng, Zhenlin Wang, Gang Chen, Hucheng Deng, Jianhua He, Kesai Li

    The Fengcheng Formation of the Mahu Sag is an unconventional reservoir that is of paramount importance for exploration and development of hydrocarbon resource. However, current research on natural fractures in the Fengcheng Formation remains limited, posing challenges for exploration of hydrocarbon resource in the region. This study is based on core observations, thin section identification, geochemical testing and the evolution of regional tectonic movements to investigate the characteristics and periods of formation of natural fractures to address this gap. According to the characteristics of natural fractures in the drilling core samples and microsections, the natural fractures in the Fengcheng Formation can be grouped into structural fractures and atectonic fractures. Structural fractures can be further divided into three subtypes: high-angle interlayer shear fractures, along-layer shear fractures, and tensile fractures. Additionally, non-tectonic fractures in this studied area are primarily bedding fractures, hydraulic fractures, and hydrocarbon-generating overpressure fractures. Vertically, fracture development is more prominent at the bottom of Feng #2 Formation and at the top of Feng #3 Formation. Results also indicate that natural fractures primarily formed during three distinct tectonic movement periods. The initial stage of fracture evolution pertains to the Late Permian period (243–266 Ma), filled with fibrous calcite, and exhibiting a uniform temperature of 70–100 °C. The second stage of fracture evolution occurred during the Late Indosinian to Early Yanshanian period (181–208 Ma), mostly filled or semi-filled with calcite, with a uniform temperature of 110–130 °C. The third stage of fracture development happened during the late Yanshanian to early Himalaya period (50–87 Ma), predominantly filled with calcite, and presenting a uniform temperature of 130–150 °C. Among the various types of structural fractures, the density of high-angle interlayer shear fractures demonstrates a positive correlation with daily gas production, indicating their vital role in promoting hydrocarbon resource production and transportation. Furthermore, microfractures generated by hydrocarbon-generating overpressure fractures exhibit small pore sizes and strong connectivity. These microfractures can create an effective permeability system by connecting previously isolated micropores in shale reservoirs, thus establishing interconnected pore spaces in the shale formation.

  • Open Access

    Coupled Thermal-Hydraulic-Mechanical Modeling of Near-Well Stress Evolution in Naturally Fractured Formations during Drilling

    by Yong Song, Zhenlin Wang, Wei Wang, Peirong Yu, Gang Chen, Jiaying Lin, Bolong Zhu, Xuyang Guo

    Naturally fractured formations usually have strong heterogeneities. Drilling and production operations in such formations can involve unwanted formation failure risks such as wellbore collapse and wellbore fracturing. This study presents a coupled thermal-hydraulic-mechanical numerical model for near-well stress evolutions during drilling in naturally fractured formations. The evolution of pressure, temperature, and geo-mechanical responses on the wellbore wall and in the near-well region is simulated. The effects of wellbore pressure, internal friction angle, and natural fracture length on formation rock risks are discussed. A failure index is used to quantify the formation rock failure risks. The existence of natural fractures magnifies the heterogeneous system response induced by drilling. Increasing the wellbore pressure from a relatively low value can improve the support for the wellbore wall, which reduces the failure risks caused by shearing. In mechanically weak formations, the effect of natural fractures on formation rock failure becomes more significant. When the natural fracture length is large, the near-well region tends to have greater failure risks as the formations become more mechanically weak. This study provides a quantitative understanding of the effects of drilling and formation parameters on failure risks.


  • Open Access

    Mode coupling based on split-ring resonators and waveguide and second harmonic enhancement

    by Hao Chen, Menglai Zhang, Zhaofu Qin, Taozheng Hu, Zhuo Chen, Zhenlin Wang

    Nonlinear optical processes are promising for many applications, and recently great attention has been paid to improve the nonlinear efficiency of plasmonic metasurfaces. Here, we propose a hybrid structure consisting of a gold split-ring resonator (SRR) based nonlinear metasurface on top of a dielectric waveguide layer. By adjusting the periodicity of the SRR array, we demonstrate that the coupling between the magnetic surface plasmons (MSPs) of the SRRs and the waveguide modes could greatly enhance the second harmonic generation (SHG) intensity. Compared with the conventional SRR arrays, the hybrid structures could provide an extra enhancement in the SHG intensity of more than one order of magnitude.


  • Open Access

    Determination of the Fractal Dimension of CO2 Adsorption Isotherms on Shale Samples

    by Hongyan Qi, Zhenlin Wang, Jianglong Yu, Peirong Yu, Guoqing Zheng

    Determination of the Fractal Dimension of CO2 Adsorption Isotherms on Shale Samples: The fractal theory has been widely applied to the analysis of gas adsorption isotherms, which are used for the pore structure characterization in unconventional reservoirs. Fractal dimension is a key parameter that can indicate the complexity of the pore structures. So far, most fractal models for gas adsorption are for N2 adsorption, while fractal models for CO2 adsorption are rarely reported. In this paper, we built a fractal model for CO2 adsorption by combining a thermodynamic model and the DubininAstakhov model. We then applied the new model to three CO2 adsorption isotherms measured on shale samples. The results show that the fractal dimension from the new model lies between 2 and 3, which agrees with the fractal geometry. The new model presented in this paper can be used for the CO2 adsorption analysis, which allows characterizing micropore structures in shales.


  • Predicting oil saturation of shale-oil reservoirs using nuclear magnetic resonance logs

    by Lichun Kuang, Zhenlin Wang, Cheng Feng, Peiqiang Zhao, Rui Mao, Jing Yu

    Oil saturation is an important parameter in shale-oil reservoir evaluation. However, due to complex wettability and pore construction, we find that conventional resistivity and nuclear magnetic resonance (NMR) methods do not perform well in calculating oil saturation in shale-oil reservoirs. Hence, we have developed a practical NMR-based method to calculate the oil saturation of the Lucaogou shale-oil Formation, Permian, in Jimusar Sag, Junggar Basin, China. First, we analyze the relationships among the wettability, oil saturation, and T2 distribution based on the theoretical formula and core analysis data. Results indicate that the ratio of the surface area wetted by water and oil is approximately equal to the ratio of water saturation and oil saturation. So we conclude that oil is mainly stored in relatively bigger pores and the surface relaxivity of the oil-wet surface is lower than that of the water-wet surface, resulting in long relaxation signals, that is, the long relaxation signals of NMR T2 spectra of shale-oil reservoirs are primarily attributed to oil signals. We have made a series of NMR measurements of as-received samples and confirm this point. Thus, we propose a T2 cutoff for water and oil to calculate the oil saturation, and we determine 6 ms as the T2 cutoff based on the oil saturation analysis of cores and NMR logs. Finally, we verify and make application of our method and acquire good results.


  • Open Access

    Characterization and Consecutive Prediction of Pore Structures in Tight Oil Reservoirs

    by Zhaohui Xu, Peiqiang Zhao, Zhenlin Wang, Mehdi Ostadhassan, Zhonghua Pan

    The Lucaogou Formation in Jimuaser Sag of Junggar Basin, China is a typical tight oil reservoir with upper and lower sweet spots. However, the pore structure of this formation has not been studied thoroughly due to limited core analysis data. In this paper, the pore structures of the Lucaogou Formation were characterized, and a new method applicable to oil-wet rocks was verified and used to consecutively predict pore structures by nuclear magnetic resonance (NMR) logs. To do so, a set of experiments including X-ray diffraction (XRD), mercury intrusion capillary pressure (MICP), scanning electron microscopy (SEM) and NMR measurements were conducted. First, SEM images showed that pore types are mainly intragranular dissolution, intergranular dissolution, micro fractures and clay pores. Then, capillary pressure curves were divided into three types (I, II and III). The pores associated with type I and III are mainly dissolution and clay pores, respectively. Next, the new method was verified by “as received” and water-saturated condition T2 distributions of two samples. Finally, consecutive prediction in fourteen wells demonstrated that the pores of this formation are dominated by nano-scale pores and the pore structure of the lower sweet spot reservoir is more complicated than that in upper sweet spot reservoir.