FVFazil Veliev

Fazil Veliev

*This is an algorithmically generated author record based on publicly available information.

Fazil Veliev has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessment of Terry Towels Strength

    by U. T. Abdullayev, M. Ergashov, N. Sh. Shamsiyeva, F. A. Veliev

  • Open Access

    Study of fiber detachment dynamics from the seeds by the baffle element

    by Fazil Veliev

    The issue of the safety of cotton seeds during the roller ginning process is one of the subjects of research on the dynamic processes of primary processing of raw materials. The study of the work of roller gins first of all showed that the process of roller ginning is based on the interaction of raw cotton, a working roller, a knife, and a breaking organ. This is a component that ensures, at certain interaction, the separation of fiber from the seeds. At the same time, there are probably no physical foundations that could determine the spatial orientation of these four components of the ginning process. In the process of roller ginning in the initial position, the seed is drawn to the slot of the contact gap of the knife-drum due to the tension of the fibers in the contact. Subsequently, the seed is struck with a certain impulse. The separation of the fibers from the seed after the impact of the beater occurs sequentially, not simultaneously. As a result of theoretical and experimental studies, the optimum frequency of shock pulse on the seed (f=18−20) was found to be the most technologically successful in terms of providing the best quality indicators of seeds and fibers. Beating in the resonance mode allows reducing the magnitude of the shock impulse on the seed leading to the reducing degree of damage to the seeds. It is believed that in the initial position, the seeds are drawn to the slit of the contact gap of the knife-drum machine due to the tension of the fibers in the contact. At this moment, the seeds at the end of the strand move only under the action of an elastic restoring force. The active part of the fiber bundle section in a dynamic process can be as little as 0.001 or less. The average value of the compliance coefficient for the raw cotton variety BA-440 was determined experimentally. This allows determining the stiffness coefficient of the volatiles indirectly. According to the obtained parameters, the dynamic state of the system practically falls into the region of parametric resonance, where the motion is unstable. This means that the seeds at the end of the strand increase significantly after the impact of the beater, which leads to the separation of the seeds from the fibers

  • Open Access

    Determining forces arising during the passage of cotton fiber between the fixed knife and working drum of the roller gin

    by Fazil Veliev

    The object of this study is a roller gin. Roller gins are installed in the gin shops of cotton factories and their purpose is to mechanically separate cotton fiber from seeds in fine-fiber varieties of cotton. The criteria for the technological evaluation of roller gin are the sum of defects and fiber contamination after ginning, the cleansing effect of gin on weeds, damage to seeds, and fiber tow effects. Existing methods do not fully reveal all the reserves of increasing the productivity of the machine, improving the design of the main working bodies of the roller gin, ensuring the effective operation of the machine, and preserving the natural qualities of fiber and seeds. The determination of the force on the surface of the drum during the ginning process is of great practical interest for designing main working bodies of roller gins. The efficiency and quality of the processed product depend on the interaction of the working drum and knife with the breaking organ in the process of fiber separation. The design of the drum and knife, their kinematic parameters, the stability of technological wiring largely determine both the performance of the gin and the quality of the fiber and seeds. Theoretical studies have been conducted to determine the factors that affect the performance of roller gin. Based on the results obtained, it is recommended to change the most important structural parameters of the machine. The obtained analytical expressions for the specific pressure and specific friction forces applied from the side of the drum surface to the processed mass of raw materials make it possible to conclude that when the load from the breaking body increases during the lower rebound, the process of grasping, dragging, and holding the fibers between the working drum and the fixed knife worsens

  • Open Access

    A theoretical method of describing the interaction of raw cotton with moving working bodies of cotton-cleaning machines

    by Fazil Veliev

    A theoretical regularity of the general behavior of raw cotton as a porous medium in the technological processes of its mechanical processing is substantiated for the first time. The speed of sound in a porous cotton medium is determined. The effect of additional force stresses inside the cotton medium, caused by the filtration of the air component from cotton raw materials during the introduction of the working body, is disclosed. A generalized equation is obtained that describes the force stress in a cotton medium when exposed to a variety of shapes of working bodies of cotton machines. A method for calculating the damage to seeds and cotton fibers in the process of interaction with the working bodies of processing machines is proposed. In the process of processing raw cotton or cotton fiber, the fibrous mass is sharply mechanically affected by organs on the work of organs in the area of inflammation or disease, while complex processes occur inside the fibrous mass associated with a change in the measurement of density and pressure in it. Stresses in the fibers in the presence of conditions of high density of body mass, which can be manifested by plastic deformation, shortening of the fibers and severity of quality. The derived theory for the stress state of cotton raw materials in the process of processing allows to use it practically in all important issues of describing the damage of fiber and cotton seeds in the technological operations of primary processing of cotton


  • Open Access

    Development of a procedure for determination of damage to seeds and cotton fibers in cotton cleaning machines

    by Fazil Veliev, Esmira Mustafayeva, Anatoliі Mamontov, Vadim Shevtsov, Sergii Zinchenko, Anatoliy Rud

    Studies on the dynamic state of cotton raw materials when introducing working bodies of processing machines into it allow to draw the following proposition. Depending on the rate of penetration of the working body into the cotton medium and the density of the medium, in the formulas used to describe the state of the medium, the exponent у ρ can vary from 1.5 to 3. The exponent for density ρ is a measure of the compression and compaction of raw materials on the surface of the working body. The exponent of ρ is also related to the amount of damage to cotton fibers and seeds. For the first time, a cotton mass is considered as a compressible porous two-component medium consisting of a mixture of cotton fibers and air included in the composition of a porous medium, which is essential in dynamic processing processes, and it must be taken into account when planning technological modes. From experiments on the penetration of a splitter with a peripheral speed u=3.5 m/s into a cotton medium with a density of ρ=150–350 kg/m3, it can be seen that a locally located “air cushion” appears in the close vicinity of the split end. The pressure in it increases by 1.5–2 times in comparison with the pressure of statistical compression of cotton fibers alone, without taking into account the influence of the air located in the pores of the system. The forces of compression of cotton fibers from the action of the splitter and the force of volumetric action on the fibers are comparable in the area of the "air cushion". Using the general equations of the mechanics of the compressed medium, as well as experimental data, the fundamental equation of the dynamic state of the mass of raw cotton when the working body of the processing machine is introduced into it, such as the density of the medium, the speed of the working body, its external shape and the degree of surface treatment, is derived. The resulting equation can be used to describe the power stresses in a cotton environment in the technological processes of roller and saw ginning, and during cotton cleaning


  • Open Access

    Theoretical study of the grate-saw-type large-litter cleaner of the mounted type

    by Husnu Kadir Karimov, Esmira Mustafayeva, Elman Jafarov, Terane Safarova, Fazil Veliev

    This paper reports a theoretical study into the saw-type-grate section of a large litter cleaner in mounted cleaners that operate on a cotton harvester, as well as the theoretical and experimental justifications for its parameters. The effect exerted by a mounted cleaner on the process of cleaning raw cotton when processing in a cotton gin has been studied. A theoretical model of the impact of grates on weeds in cleaning processes has been developed. A condition for repelling the litter by grates and removing it from a cotton technological flow has been studied. The use of grates with a flat-shaped front edge allows for a steady reduction in the amount of damage in the raw cotton fiber, which improves the fiber quality and leads to a decrease in the number of defects and debris. The experimental and theoretical studies have produced evidence that enables the efficient operation of mounted-type cleaning machines in the cotton-cleaning industry. The movements of raw cotton as a viscoelastic body at the free impact of litter with the teeth of the saw against a stationary surface of the grate were investigated; the force schemes between the grates and saws were considered. The effect of a saw-type drum on the technological properties of raw cotton was investigated, namely on seed damage and the formation of the free fiber. A model of interaction between weed particles and grates was considered; the trajectories of the litter flight were shown in the function of the slope of the grate and the recovery factor. The issues of the relationship between the physical-mechanical properties of raw cotton, the elastic characteristics of raw cotton, and the impact force of cotton flies against the grate with a flat working face. Solving these issues could make it possible to determine the optimal structure of the raw cotton cleaning mechanisms, which would improve the effectiveness of cleaning raw cotton from weeds. Based on the identified functional links, it has become possible to construct new or improve existing structures of the saw-type grate section of mounted cleaners. Practical experience shows that the use of the designed structure in large litter cleaners of the mounted type produces a significant increase in the cleaning effect of the machine Проведено теоретическое исследование пильчато-колосниковой секции очистителя крупного сора в навесных очистителях, функционирующей на хлопкоуборочной машине, теоретические и экспериментальные обоснования его параметров. Изучены влияния навесного очистителя на технологический процесс очистки хлопка-сырца при переработке на хлопкозаводе. Разработана теоретическая модель воздействия колосников на сорные примеси в очистительных процессах. Изучено условие отражения сора колосниками и вывод его из технологического потока хлопка. Применение колосников плоской формы передней грани обеспечивает устойчивое снижение количества поврежденностей в волокне хлопка-сырца, что повышает качество волокна и приводит к снижению суммы пороков и засоренности. В результате экспериментальных и теоретических исследований получены данные, которые позволяют организовать эффективную работу очистительных машин навесного типа в хлопкоочистительной промышленности. Исследованы движения хлопка-сырца как упруго-вязкого тела при свободном ударе сора зубьями пилы об неподвижную поверхность колосника, рассмотрены силовые схемы между колосниками и пилами. Рассмотрено влияние пильчатого барабана на технологические свойства хлопка-сырца, а именно на поврежденность семян и образование свободного волокна. Рассмотрена модель взаимодействия сорных частиц с колосниками, показаны траектории полета сора в функции наклона колосника и коэффициента восстановления. Исследованы вопросы взаимосвязи физико-механических свойств хлопка-сырца, упругих характеристик хлопка-сырца и силы удара летучки о колосник с плоской рабочей гранью. Решение этих вопросов даст возможность найти оптимальную конструкцию механизмов очистки хлопка-сырца, что приведет к повышению эффекта очистки хлопка-сырца от сорных примесей. На основе выявленных функциональных связей открывается возможность создания новых или совершенствования существующих конструкций пильчато-колосниковой секции очистителей навесного типа. Полученный опыт...


  • Open Access

    A study of the influence produced by the dynamics of the working bodies of cotton-processing machines on the cotton fibre quality

    by Fazil Veliev

    Cotton mass is considered as a compressible porous two-component medium, consisting of a mixture of cotton fibres and air included in the porous medium, which is essential in dynamic treatment processes and requires consideration when planning technological modes. It was found that the speed of sound in multicomponent media significantly decreases with an increase in the content of the gaseous component. With a certain content of components, it can become less than in each of the components separately. This is due to the fact that with an increase in the content of the gaseous component, the density of the medium increases insignificantly, and the compressibility of air sharply decreases in the pores. As a result of the research, it was found that the value of the dynamic change in the density of cotton raw materials can significantly exceed its density during static compression. This kind of influence can have both adverse and desirable effects on the primary stage of cotton processing. The dynamic characteristics of raw cotton as an object of mechanical technology were studied. The values of the speed of sound as a function of the density of cotton raw materials were determined on the basis of the theory of a two-component porous medium. The types of the dynamic compression curve of raw cotton have been established. Experimental studies on the compressibility of raw cotton are generalized. From the analysis of the cleaning processing of fibres and seeds on cleaning machines, it follows that when assigning a technological processing mode, it is necessary to comply it with the value of the sound speed for a given density of raw materials. It is necessary to avoid such rates of penetration of the working bodies into raw materials that are commensurate with the speed of sound at a given raw material density. This local dramatic increase in cotton media characteristics is a significant cause of fibre damage


  • Open Access

    Construction of a theoretical method for evaluating the kinematic and geometric parameters of loosening rollers in the cleaners of raw cotton from large impurities

    by Fazil Veliev

    Construction of a theoretical method for evaluating the kinematic and geometric parameters of loosening rollers in the cleaners of raw cotton from large impurities

  • Open Access

    Influence of elastic characteristics of raw cotton on the mechanics of feed rollers in the cleaners from large impurities

    by Fazil Veliev, Rahib Sailov

    Influence of elastic characteristics of raw cotton on the mechanics of feed rollers in the cleaners from large impurities