Oleg Terentiev
Oleg Terentiev has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Mykola Sergienko
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
5 shared publications - Anatoliy Kryuchkov
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - Viktor Rozen
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
2 shared publications A. Kleshchov
Національний технічний університет України “Київський політехнічний інститут імені Ігоря Сікорського
1 shared publicationA. Vorfolomeiev
1 shared publication- Adam Bodyuk
Національний технічний університет України «Київський політехнічний інститут імені Ігоря Сікорського
1 shared publication
Latest Publications
- Open Access
- 15 May 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
POLLUTION OF GROUNDWATER RESOURCES BY PROCESSES IRON ORE SURFACE USE
In Ukraine, as in most countries of the world, preservation of the natural qualities of surface and underground water resources is one of the difficult to solve problems. Groundwater pollution is carried out spontaneously and as a result of organized emissions on the surface of territories and into underground cavities. Contaminated areas of territories around mineral deposits, industrial facilities, as well as masses of pollutants, are growing. In terms of scale, it is necessary to single out groundwater pollution as a result of ore extraction and placement of rocks in dumps, as the most harmful for agricultural lands and surface water bodies. Calculating the amount of compensation for damages caused by contamination of groundwater with harmful substances requires further official adjustments, taking into account the factor of public ownership of natural resources in general. Therefore, it is necessary that the following situations are officially taken into account in the normative legal acts of local authorities: underground waters and their environment belong to objects of public property, therefore, in the methods of determining and calculating the ecological consequences of pollution of underground waters and their underground environment, it is necessary to provide that damages must be studied and assessed from the point of view of damage to public property; polluted underground waters and their underground environment are located locally on the territories of territorial Starostov districts, which represent the people of Ukraine; in accordance with clause 1, when calculating the amount of compensation for pollution, it is generally necessary to determine the losses for the population of these districts and the amounts of charges and payments to them; local authorities need to organize compensation processes, monitor their implementation and effectiveness. The definition of an environmental tax does not correspond to the definition of the concept of a tax as an unconditional payment to the budget, since in its essence it is a punishment for the discharge of polluted substances into water bodies and ecological pollution of water resources.
- 15 May 2024
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 2
Open AccessPOLLUTION OF GROUNDWATER RESOURCES BY PROCESSES IRON ORE SURFACE USE
In Ukraine, as in most countries of the world, preservation of the natural qualities of surface and underground water resources is one of the difficult to solve problems. Groundwater pollution is carried out spontaneously and as a result of organized emissions on the surface of territories and into underground cavities. Contaminated areas of territories around mineral deposits, industrial facilities, as well as masses of pollutants, are growing. In terms of scale, it is necessary to single out groundwater pollution as a result of ore extraction and placement of rocks in dumps, as the most harmful for agricultural lands and surface water bodies. Calculating the amount of compensation for damages caused by contamination of groundwater with harmful substances requires further official adjustments, taking into account the factor of public ownership of natural resources in general. Therefore, it is necessary that the following situations are officially taken into account in the normative legal acts of local authorities: underground waters and their environment belong to objects of public property, therefore, in the methods of determining and calculating the ecological consequences of pollution of underground waters and their underground environment, it is necessary to provide that damages must be studied and assessed from the point of view of damage to public property; polluted underground waters and their underground environment are located locally on the territories of territorial Starostov districts, which represent the people of Ukraine; in accordance with clause 1, when calculating the amount of compensation for pollution, it is generally necessary to determine the losses for the population of these districts and the amounts of charges and payments to them; local authorities need to organize compensation processes, monitor their implementation and effectiveness. The definition of an environmental tax does not correspond to the definition of the concept of a tax as an unconditional payment to the budget, since in its essence it is a punishment for the discharge of polluted substances into water bodies and ecological pollution of water resources.
- 1 December 2023
- Published by Springer Nature
- p. 159-178
Removal of Contaminants from an Aqueous Solution by a Magnetic Field Using the Effect of Focusing Ionic Impurities
- 1 December 2023
- Published by Springer Nature
- p. 159-178
Removal of Contaminants from an Aqueous Solution by a Magnetic Field Using the Effect of Focusing Ionic Impurities
- Open Access
- 7 November 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
VIRTUAL MODEL OF THE SYSTEM "INDUCTION MOTOR - SOFTSTARTER WITH TWO CONTROLLED PHASES"
One of the most commonly used start methods of induction motors is starting by gradually increasing the supply voltage. At the same time, softstarters based on thyristors or triacs are used, which are cheaper in comparison with frequency inverters based on IGBT - transistors. In turn, the disadvantage of this method of starting with significant reduction of the starting torque, so the possibility of using such starters for various executive mechanisms requires careful research. In the presence of a limitation of power source power, especially in wartime conditions, the problem of limitation of starting currents, especially in the case of using starters with two adjustable phases, is actual. To take into account the multiplicity of starting currents for different types of mechanisms, a mathematical model of the system " induction motor - softstarter with two controlled phases" was created. The model differs from the known ones by the possibility of limiting the power of the power supply network, the appearance of the mechanical characteristics of the executive mechanism and the starting moment at voltage ramp start mode. Transient processes in relative units for the possibility of estimating the multiplicity of starting currents to determine the required power of the autonomous power source are presented. To assess the adequacy of the mathematical model, a research stand with measuring of motor winding currents using a current transformer and a microprocessor device with an oscillography function was created. In the work, a comparative analysis of the results of modeling and experimental studies on a physical model is carried out, herewith the discrepancy of the results did not exceed 10%. It was determined that when using a soft-start device with two adjustable phases, even with small voltages, the current multiplicity is quite high and requires the use of a power source of greater power, but less than in the case of direct start. Formulated conclusions based on research results and recommendations for further reduction of starting currents.
- 7 November 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
Open AccessVIRTUAL MODEL OF THE SYSTEM "INDUCTION MOTOR - SOFTSTARTER WITH TWO CONTROLLED PHASES"
One of the most commonly used start methods of induction motors is starting by gradually increasing the supply voltage. At the same time, softstarters based on thyristors or triacs are used, which are cheaper in comparison with frequency inverters based on IGBT - transistors. In turn, the disadvantage of this method of starting with significant reduction of the starting torque, so the possibility of using such starters for various executive mechanisms requires careful research. In the presence of a limitation of power source power, especially in wartime conditions, the problem of limitation of starting currents, especially in the case of using starters with two adjustable phases, is actual. To take into account the multiplicity of starting currents for different types of mechanisms, a mathematical model of the system " induction motor - softstarter with two controlled phases" was created. The model differs from the known ones by the possibility of limiting the power of the power supply network, the appearance of the mechanical characteristics of the executive mechanism and the starting moment at voltage ramp start mode. Transient processes in relative units for the possibility of estimating the multiplicity of starting currents to determine the required power of the autonomous power source are presented. To assess the adequacy of the mathematical model, a research stand with measuring of motor winding currents using a current transformer and a microprocessor device with an oscillography function was created. In the work, a comparative analysis of the results of modeling and experimental studies on a physical model is carried out, herewith the discrepancy of the results did not exceed 10%. It was determined that when using a soft-start device with two adjustable phases, even with small voltages, the current multiplicity is quite high and requires the use of a power source of greater power, but less than in the case of direct start. Formulated conclusions based on research results and recommendations for further reduction of starting currents.
- Open Access
- 7 November 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
PURIFICATION OF LIQUIDS IMPURITIES BY ELECTROMAGNETIC INFLUENCE
The importance of liquid purification leads to a decrease in the concentration of pollutants mainly in the stream during its use. This paper analyzes the relevance of document verification in accordance with existing legislation. An analysis of actual physical and chemical methods of liquid purification was carried out. The creation of a working chamber for the grouping of impurities for liquid purification is described. The result was achieved by electromagnetic influence on charged impurities. The scientific news of the study of the creation of a paraboloid of rotation of impurities has been created. The principle of operation of the cleaning system is shown on the example of the grouping of oil and water impurities. Research results show the possibility of liquid purification by controlling the trajectory of impurities. The work uses the Dini equation (Italian: Ulisse Dini) to describe the mathematical model of the grouping of impurities. A model of the trajectory of impurities in the LabVIEW shell was created. The possibility of further purification of the liquid by the method of electromagnetic grouping and subsequent removal of impurities from the flow was verified. The study takes place in the installation of inductance coils on the outer surface of the impurity grouping chamber. The trajectory of the movement of impurities in the magnetic field is determined. The electromagnetic influence on the charged impurities changes their trajectory and causes the impurities to move along the Larmor radius. When the magnitude of the electromagnetic field increases, the speed of movement of the impurity increases, and the radius of motion of the impurity decreases. It has been proven that impurities with a lower density are better concentrated in the center of the RKG. The parameters of the coils for creating an electromagnetic field are selected. The model of the rotation of oil impurities in the driver is reproduced on the model. The change in the specific conductivity of the water medium with increasing magnetic field induction was verified. At the first stage, we offer the construction of a stand for further purification of liquid by the method of electromagnetic grouping of impurities. Practical recommendations are given for achieving the efficiency of the electromagnetic method of liquid purification and its reuse.
- 7 November 2023
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3
Open AccessPURIFICATION OF LIQUIDS IMPURITIES BY ELECTROMAGNETIC INFLUENCE
The importance of liquid purification leads to a decrease in the concentration of pollutants mainly in the stream during its use. This paper analyzes the relevance of document verification in accordance with existing legislation. An analysis of actual physical and chemical methods of liquid purification was carried out. The creation of a working chamber for the grouping of impurities for liquid purification is described. The result was achieved by electromagnetic influence on charged impurities. The scientific news of the study of the creation of a paraboloid of rotation of impurities has been created. The principle of operation of the cleaning system is shown on the example of the grouping of oil and water impurities. Research results show the possibility of liquid purification by controlling the trajectory of impurities. The work uses the Dini equation (Italian: Ulisse Dini) to describe the mathematical model of the grouping of impurities. A model of the trajectory of impurities in the LabVIEW shell was created. The possibility of further purification of the liquid by the method of electromagnetic grouping and subsequent removal of impurities from the flow was verified. The study takes place in the installation of inductance coils on the outer surface of the impurity grouping chamber. The trajectory of the movement of impurities in the magnetic field is determined. The electromagnetic influence on the charged impurities changes their trajectory and causes the impurities to move along the Larmor radius. When the magnitude of the electromagnetic field increases, the speed of movement of the impurity increases, and the radius of motion of the impurity decreases. It has been proven that impurities with a lower density are better concentrated in the center of the RKG. The parameters of the coils for creating an electromagnetic field are selected. The model of the rotation of oil impurities in the driver is reproduced on the model. The change in the specific conductivity of the water medium with increasing magnetic field induction was verified. At the first stage, we offer the construction of a stand for further purification of liquid by the method of electromagnetic grouping of impurities. Practical recommendations are given for achieving the efficiency of the electromagnetic method of liquid purification and its reuse.
- Open Access
- 29 May 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
PURIFICATION OF LIQUID BY ELECTROMAGNETIC FOCUSING OF IMPURITIES
The article discusses topical issues of increasing the efficiency of the filtrate purification system by physical methods developed at the Institute of Energy Saving and Energy Management «Igor Sikorsky Kyiv Polytechnic Institute». The work is devoted to the urgent problem of introducing the latest resource-saving, energy-saving integrated technologies for the purification of contaminated liquid media. To date, not a single theoretical base has been developed, there are only hypotheses, and there are no practical methods for calculating the magnetic treatment of water. The article is devoted to the purification by physical methods of the filtrate of domestic and industrial wastewater of industrial and domestic waste. An electromagnetic control unit was used to clean the fluid flow. Reducing the aggressiveness of the filtrate involves multi-stage control of the trajectory of impurities when they are removed from the main stream. Taking into account the properties of the experiment planning matrix, the coefficients of the regression equation were calculated, which adequately reflect the processes of liquid purification during its magnetization. Pollutant ions are charged particles. To remove them from the general flow, it is necessary to place generators on the pipeline to create developed cavitation in the fluid flow and inductance. Cavitation bubbles are internal oscillators and, releasing energy upon impact, crush and purify impurities. In practical water purification, insufficient attention is paid to the control of the dynamics of charged impurities by the action of external and internal forces. Magnetic treatment of an aqueous medium has a number of advantages over other physical methods: it acts on all groups of impurities; influence on both chemical and physical processes in the aquatic environment; leads to the vivacity of the environment within the enterprise due to the destruction of electromagnetic bonds between the molecules of the indium and impurities, activates the aquatic environment. The main advantage in the purification of an aqueous medium from ions of impurities is the ability to control mobile ions in a magnetic field, and therefore direct vidions of impurities per stream. Magnetic treatment of aqueous media has found its application in many industries, which, in turn, confirms the effectiveness of such devices.
- 29 May 2022
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 4
Open AccessPURIFICATION OF LIQUID BY ELECTROMAGNETIC FOCUSING OF IMPURITIES
The article discusses topical issues of increasing the efficiency of the filtrate purification system by physical methods developed at the Institute of Energy Saving and Energy Management «Igor Sikorsky Kyiv Polytechnic Institute». The work is devoted to the urgent problem of introducing the latest resource-saving, energy-saving integrated technologies for the purification of contaminated liquid media. To date, not a single theoretical base has been developed, there are only hypotheses, and there are no practical methods for calculating the magnetic treatment of water. The article is devoted to the purification by physical methods of the filtrate of domestic and industrial wastewater of industrial and domestic waste. An electromagnetic control unit was used to clean the fluid flow. Reducing the aggressiveness of the filtrate involves multi-stage control of the trajectory of impurities when they are removed from the main stream. Taking into account the properties of the experiment planning matrix, the coefficients of the regression equation were calculated, which adequately reflect the processes of liquid purification during its magnetization. Pollutant ions are charged particles. To remove them from the general flow, it is necessary to place generators on the pipeline to create developed cavitation in the fluid flow and inductance. Cavitation bubbles are internal oscillators and, releasing energy upon impact, crush and purify impurities. In practical water purification, insufficient attention is paid to the control of the dynamics of charged impurities by the action of external and internal forces. Magnetic treatment of an aqueous medium has a number of advantages over other physical methods: it acts on all groups of impurities; influence on both chemical and physical processes in the aquatic environment; leads to the vivacity of the environment within the enterprise due to the destruction of electromagnetic bonds between the molecules of the indium and impurities, activates the aquatic environment. The main advantage in the purification of an aqueous medium from ions of impurities is the ability to control mobile ions in a magnetic field, and therefore direct vidions of impurities per stream. Magnetic treatment of aqueous media has found its application in many industries, which, in turn, confirms the effectiveness of such devices.
- Open Access
- 17 May 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Geoengineering
- No. 5,p. 7-13
INCREASING THE EFFICIENCY OF BLASTING WORKS IN THE QUARRY OF BUILDING MATERIALS
The article is devoted to the urgent problem of increasing the efficiency of blasting operations in open pits in conditions of high water saturation of minerals. The idea of solving this problem is to use the effect of draining the local area of the water-saturated block of the mineral due to the ordinal explosion of the well charge. The purpose of this study was to improve the efficiency of blasting operations on flooded fractured rocks in open pit mining. Research methodology. The proposed technique makes it possible to determine the parameters of drainage of the watered mass during the explosion of borehole charges and the parameters of an ordinal explosion. This makes it possible to improve the quality of rock crushing and reduce the consumption of explosives per unit cost. The main direction of research in this work is to reduce the energy intensity of the process of destruction of a water-saturated mineral by using the internal potential of water in the cracks of the massif destroyed by the explosion. The regularities and the role of the drainage funnel in the efficiency of destruction have been established. The novelty and originality of the work is a developed technology for removing water from the explosion zone, which increases the efficiency of explosion and destruction of rocks using special water-resistant explosives. The practical value of the work lies in the effectiveness of the proposed method for carrying out blasting operations, which, along with improving the quality of crushing, provides an increase in the output of blasted rock mass from one running meter of the well and reduces the cost of expensive water-resistant explosives. Conclusions. The introduction of research results and recommendations in open pits made it possible to increase the efficiency of blasting operations in the development of water-saturated rocks. Energy consumption for the destruction of an array of water-saturated minerals is reduced by 10%. The amount of blasted rock mass per running meter of the well increased by 14.1%, and the specific consumption of explosives decreased by (12-14) %. Keywords: quarry, minerals, well, filtration, water-saturated massif, crushing, explosive, detonation.
- 17 May 2021
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Geoengineering
- No. 5,p. 7-13
Open AccessINCREASING THE EFFICIENCY OF BLASTING WORKS IN THE QUARRY OF BUILDING MATERIALS
The article is devoted to the urgent problem of increasing the efficiency of blasting operations in open pits in conditions of high water saturation of minerals. The idea of solving this problem is to use the effect of draining the local area of the water-saturated block of the mineral due to the ordinal explosion of the well charge. The purpose of this study was to improve the efficiency of blasting operations on flooded fractured rocks in open pit mining. Research methodology. The proposed technique makes it possible to determine the parameters of drainage of the watered mass during the explosion of borehole charges and the parameters of an ordinal explosion. This makes it possible to improve the quality of rock crushing and reduce the consumption of explosives per unit cost. The main direction of research in this work is to reduce the energy intensity of the process of destruction of a water-saturated mineral by using the internal potential of water in the cracks of the massif destroyed by the explosion. The regularities and the role of the drainage funnel in the efficiency of destruction have been established. The novelty and originality of the work is a developed technology for removing water from the explosion zone, which increases the efficiency of explosion and destruction of rocks using special water-resistant explosives. The practical value of the work lies in the effectiveness of the proposed method for carrying out blasting operations, which, along with improving the quality of crushing, provides an increase in the output of blasted rock mass from one running meter of the well and reduces the cost of expensive water-resistant explosives. Conclusions. The introduction of research results and recommendations in open pits made it possible to increase the efficiency of blasting operations in the development of water-saturated rocks. Energy consumption for the destruction of an array of water-saturated minerals is reduced by 10%. The amount of blasted rock mass per running meter of the well increased by 14.1%, and the specific consumption of explosives decreased by (12-14) %. Keywords: quarry, minerals, well, filtration, water-saturated massif, crushing, explosive, detonation.
- Open Access
- 6 April 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3,p. 85-91
Environmental impact of industrial transport
The article discusses topical issues and problems of the impact of industrial road transport on the environment, namely: emissions of pollutants into the atmosphere depending on the type of fuel and their negative impact on human health. The significant increase in the vehicle fleet is causing great harm in the form of harmful emissions from fuel combustion systems, which cannot be dealt with standard car cleaning systems. The situation is aggravated by the fact that car emissions are concentrated in the surface air layer - precisely in the zone of our breathing. Low- quality gasoline is still used, polluting the environment. About 280 harmful substances were found in the exhaust gases of cars, including carcinogenic benzopyrenes, nitrogen oxides, lead, mercury, aldehydes, carbon oxides, soot, hydrocarbons. These emissions increase significantly when starting off or increasing speed. Diesel engine emissions are different from gasoline engine emissions. A diesel engine burns fuel more completely, oxidizes less carbon and produces less non-combustible hydrocarbons. But, at the same time, due to the lack of air in the diesel engine, more nitrogen oxide is formed. Diesel engines also emit soot. Gas emissions from transport into the atmosphere are exposed to sunlight, which leads to photochemical reactions leading to the formation of NО2, 0з, peroxides, benzopyrene (C22H14) and other compounds. In addition, each vehicle emits rubber dust into the atmosphere when its tires are abraded and worn out. Accordingly, the scale of damage caused by transport to the environment and people is also increasing. The article analyzes the existing and promising types of fuel and the reduction of the technogenic impact of industrial road transport on the environment in Ukraine.
- 6 April 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in POWER ENGINEERING: economics, technique, ecology
- No. 3,p. 85-91
Open AccessEnvironmental impact of industrial transport
The article discusses topical issues and problems of the impact of industrial road transport on the environment, namely: emissions of pollutants into the atmosphere depending on the type of fuel and their negative impact on human health. The significant increase in the vehicle fleet is causing great harm in the form of harmful emissions from fuel combustion systems, which cannot be dealt with standard car cleaning systems. The situation is aggravated by the fact that car emissions are concentrated in the surface air layer - precisely in the zone of our breathing. Low- quality gasoline is still used, polluting the environment. About 280 harmful substances were found in the exhaust gases of cars, including carcinogenic benzopyrenes, nitrogen oxides, lead, mercury, aldehydes, carbon oxides, soot, hydrocarbons. These emissions increase significantly when starting off or increasing speed. Diesel engine emissions are different from gasoline engine emissions. A diesel engine burns fuel more completely, oxidizes less carbon and produces less non-combustible hydrocarbons. But, at the same time, due to the lack of air in the diesel engine, more nitrogen oxide is formed. Diesel engines also emit soot. Gas emissions from transport into the atmosphere are exposed to sunlight, which leads to photochemical reactions leading to the formation of NО2, 0з, peroxides, benzopyrene (C22H14) and other compounds. In addition, each vehicle emits rubber dust into the atmosphere when its tires are abraded and worn out. Accordingly, the scale of damage caused by transport to the environment and people is also increasing. The article analyzes the existing and promising types of fuel and the reduction of the technogenic impact of industrial road transport on the environment in Ukraine.
- Open Access
- 31 January 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Geoengineering
- No. 1
STATIC-DYNAMIC LOOSENING OF FROZEN ROCKS
Рихлення мерзлих порід та ґрунтів є одним із найбільш складних, трудоємних та економічно затратних технологічних процесів в гірничо-енергетичному та військовому комплексах, будівництві автошляхів та промислових об’єктів, прокладанні каналів, меліорації та інших галузях промисловості. З усіх розрихлювачів, що мають механічні засоби руйнування мерзлих гірських порід та ґрунтів, переважні гідропневматичні ударні інструменти. Вони руйнують мерзлі породи значними динамічними навантаженнями. Гідропневматичні ударні механізми характеризуються високою питомою енергією, автономністю подачі, компактністю, низькою металоємністю, простотою конструкції та управлінням в роботі. Також знаходять все більше визнання розрихлювачі з комбінованими способами розробки вибоїв. У цій статті представлені результати практичних досліджень розпушування мерзлих гірських порід та ґрунтів. Встановлено залежності зміни швидкості антифазного розпушувача гідропневматичного молотка, енергії та частоти ударів. Вибрані та обґрунтуванні робочі параметри активного розрихлювача з антифазним робочим органом. Промисловими випробуваннями підтверджено, що оптимальним режимом активного рихлення породного масиву з числом ударів щільноміра ДорНДІ С=100…110 є режим при середній швидкості руху базової машини 0,88 м/с і активізації зуба ударами енергією 7,5 кДж з частотою 2,0 Гц. Оптимальність цього режиму підтверджена мінімальною питомою енергоємністю 1282 кДж/м3, при продуктивності 0,175 м3/с. Натурні випробування активного розрихлювача проводилися в зимовий період на полігоні селища Гореничі Київської області. Промерзання ґрунту досягало 1,1 м. Вплив глибини рихлення на швидкість рихлення активного розрихлювача вивчався при тяглових зусиллях базової машини 0,16 і 0,24 МН. Активне рихлення ведеться при коефіцієнті зчеплення базової машини з поверхнею складали відповідно 0,4 і 0,6. Зміна швидкості з ростом глибини рихлення носить нелінійний характер. Зі збільшенням глибини від 0,4 до 0,5 м швидкість рихлення знижується в 1,83; 1,72; і 1,74 рази при енергії удару відповідно 6,0; 7,0 і 8,0 кДж. При зростанні глибини рихлення від 0,5 до 0,6 м інтенсивність зниження швидкості зменшується. В цьому випадку швидкість знижується відповідно в 1,52; 1,45 і 1,74 рази. Збільшення глибини рихлення від 0.6 до 0.7 м веде до зниження швидкості рихлення відповідно у 1.29, 1,23 і 1.56 рази.
- 31 January 2020
- Published by Igor Sikorsky Kyiv Polytechnic Institute in Geoengineering
- No. 1
Open AccessSTATIC-DYNAMIC LOOSENING OF FROZEN ROCKS
Рихлення мерзлих порід та ґрунтів є одним із найбільш складних, трудоємних та економічно затратних технологічних процесів в гірничо-енергетичному та військовому комплексах, будівництві автошляхів та промислових об’єктів, прокладанні каналів, меліорації та інших галузях промисловості. З усіх розрихлювачів, що мають механічні засоби руйнування мерзлих гірських порід та ґрунтів, переважні гідропневматичні ударні інструменти. Вони руйнують мерзлі породи значними динамічними навантаженнями. Гідропневматичні ударні механізми характеризуються високою питомою енергією, автономністю подачі, компактністю, низькою металоємністю, простотою конструкції та управлінням в роботі. Також знаходять все більше визнання розрихлювачі з комбінованими способами розробки вибоїв. У цій статті представлені результати практичних досліджень розпушування мерзлих гірських порід та ґрунтів. Встановлено залежності зміни швидкості антифазного розпушувача гідропневматичного молотка, енергії та частоти ударів. Вибрані та обґрунтуванні робочі параметри активного розрихлювача з антифазним робочим органом. Промисловими випробуваннями підтверджено, що оптимальним режимом активного рихлення породного масиву з числом ударів щільноміра ДорНДІ С=100…110 є режим при середній швидкості руху базової машини 0,88 м/с і активізації зуба ударами енергією 7,5 кДж з частотою 2,0 Гц. Оптимальність цього режиму підтверджена мінімальною питомою енергоємністю 1282 кДж/м3, при продуктивності 0,175 м3/с. Натурні випробування активного розрихлювача проводилися в зимовий період на полігоні селища Гореничі Київської області. Промерзання ґрунту досягало 1,1 м. Вплив глибини рихлення на швидкість рихлення активного розрихлювача вивчався при тяглових зусиллях базової машини 0,16 і 0,24 МН. Активне рихлення ведеться при коефіцієнті зчеплення базової машини з поверхнею складали відповідно 0,4 і 0,6. Зміна швидкості з ростом глибини рихлення носить нелінійний характер. Зі збільшенням глибини від 0,4 до 0,5 м швидкість рихлення знижується в 1,83; 1,72; і 1,74 рази при енергії удару відповідно 6,0; 7,0 і 8,0 кДж. При зростанні глибини рихлення від 0,5 до 0,6 м інтенсивність зниження швидкості зменшується. В цьому випадку швидкість знижується відповідно в 1,52; 1,45 і 1,74 рази. Збільшення глибини рихлення від 0.6 до 0.7 м веде до зниження швидкості рихлення відповідно у 1.29, 1,23 і 1.56 рази.
- Open Access
- 28 August 2019
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (10 (100)) , 13-21
Environmental potential analysis of co-processing waste in cement kilns
Environmental potential analysis of co-processing waste in cement kilns
- 28 August 2019
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (10 (100)) , 13-21
Open AccessEnvironmental potential analysis of co-processing waste in cement kilns
Environmental potential analysis of co-processing waste in cement kilns