Mathias Berciano
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mathias Berciano has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Alonso-Ramos
Université Paris-Saclay, CNRS, Centre de Nanosciences et de Nanotechnologies
3 shared publications - Daniel Benedikovic
University of Žilina
3 shared publications - Delphine Marris-Morini
C2N, Université Paris Saclay, CNRS
3 shared publications - Eric Cassan
Ctr. de Nanosciences et de Nanotechnologies (France)
3 shared publications - Joris Van Campenhout
IMEC
3 shared publications - Laurent Vivien
Centre de Nanosciences et de Nanotechnologies, CNRS, Université Paris-Saclay 1 , Palaiseau 91120
3 shared publications
Latest Publications
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (22) , 7825-7833
Scaling Photonic Neural Networks: A Silicon Photonic GeMM Leveraging a Time-space Multiplexed Xbar
We demonstrate a silicon photonic Xbar-based general matrix multiplier (Xbar GeMM) for optical neural network (NN) applications, utilizing a hybrid time-space multiplexing scheme for supporting matrix dimensions far beyond the dimensions of the Xbar circuit. We present the operational principle of the silicon photonic accelerator that is capable of merging space and time division multiplexing techniques through the use of high-speed input and weighting nodes within a coherent M × N Xbar. The proposed scheme was demonstrated experimentally using a 2×2 Xbar that employs electro-absorption modulators (EAM) with 56 GHz bandwidth both at its input signal vector and its weight matrix modulation stages. Its experimental validation as a photonic GeMM engine was performed for 5, 10, 20, 30 and 50 GBd compute rates and was benchmarked as a NN classifier for the IRIS dataset, successfully executing a total number of 2100 products over a 2×2 matrix hardware with an accuracy up to 93.3%. All SiGe EAMs were driven by high-speed electrical signals with a peak-to-peak voltage ranging between 0.9-1.2 V, suggesting a strong potential for a photonic engine that will be capable to perform with CMOS-compatible driving voltages. Finally, we discuss the pros and cons of the proposed hybrid multiplexing scheme, concluding to a thorough system performance and energy efficiency analysis.
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (22) , 7825-7833
Scaling Photonic Neural Networks: A Silicon Photonic GeMM Leveraging a Time-space Multiplexed Xbar
We demonstrate a silicon photonic Xbar-based general matrix multiplier (Xbar GeMM) for optical neural network (NN) applications, utilizing a hybrid time-space multiplexing scheme for supporting matrix dimensions far beyond the dimensions of the Xbar circuit. We present the operational principle of the silicon photonic accelerator that is capable of merging space and time division multiplexing techniques through the use of high-speed input and weighting nodes within a coherent M × N Xbar. The proposed scheme was demonstrated experimentally using a 2×2 Xbar that employs electro-absorption modulators (EAM) with 56 GHz bandwidth both at its input signal vector and its weight matrix modulation stages. Its experimental validation as a photonic GeMM engine was performed for 5, 10, 20, 30 and 50 GBd compute rates and was benchmarked as a NN classifier for the IRIS dataset, successfully executing a total number of 2100 products over a 2×2 matrix hardware with an accuracy up to 93.3%. All SiGe EAMs were driven by high-speed electrical signals with a peak-to-peak voltage ranging between 0.9-1.2 V, suggesting a strong potential for a photonic engine that will be capable to perform with CMOS-compatible driving voltages. Finally, we discuss the pros and cons of the proposed hybrid multiplexing scheme, concluding to a thorough system performance and energy efficiency analysis.
- 24 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (18) , 6000-6006
Electro-Absorption Modulator Thermo-Optical Self-Heating Analysis
In this work a novel methodology is presented for coupled thermo-optical modelling of an electro-absorption modulator (EAM). First, an optical FDTD simulation results in the light absorption map in the EAM waveguide. This absorption is used as a heat source boundary condition in a thermal finite element (FE) simulation in order to calculate the waveguide temperature. The FE model is validated with experimental data. The temperature is averaged over the device length and used as input in a compact, fully coupled thermo-optical model. The model reveals a thermal instability of the device characteristic, which limits the maximum amount of optical power the device can handle. Finally, using the thermal FE model, a self-heating mitigation strategy is proposed. Using process compatible design changes, self-heating can be reduced by up to 40%, greatly increasing the EAM optical power handling capabilities.
- 24 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 41 (18) , 6000-6006
Electro-Absorption Modulator Thermo-Optical Self-Heating Analysis
In this work a novel methodology is presented for coupled thermo-optical modelling of an electro-absorption modulator (EAM). First, an optical FDTD simulation results in the light absorption map in the EAM waveguide. This absorption is used as a heat source boundary condition in a thermal finite element (FE) simulation in order to calculate the waveguide temperature. The FE model is validated with experimental data. The temperature is averaged over the device length and used as input in a compact, fully coupled thermo-optical model. The model reveals a thermal instability of the device characteristic, which limits the maximum amount of optical power the device can handle. Finally, using the thermal FE model, a self-heating mitigation strategy is proposed. Using process compatible design changes, self-heating can be reduced by up to 40%, greatly increasing the EAM optical power handling capabilities.
- 16 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (5) , 1409-1415
56 Gb/s NRZ O-Band Hybrid BiCMOS-Silicon Photonics Receiver Using Ge/si Avalanche Photodiode
- 16 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (5) , 1409-1415
56 Gb/s NRZ O-Band Hybrid BiCMOS-Silicon Photonics Receiver Using Ge/si Avalanche Photodiode
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 3044-3050
27 GHz Silicon-Contacted Waveguide-Coupled Ge/Si Avalanche Photodiode
We report a silicon-contacted Ge/Si avalanche photodiode with RF gain of 11 and a bandwidth of 27 GHz at -12 V operating at 1310 nm. The device is fabricated in an established Si photonics platform without additional process complexity and contacts only on Si. Wafer-scale performance data are presented confirming the reproducibility and the manufacturability of the device. Wide open eye diagrams are demonstrated for 25, 40 and 50 Gbps data-rates. The demonstration of such avalanche photodiode shows great potential for improving optical link margins for optical transceivers operating at 400 Gb/s and beyond.
- 27 April 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (11) , 3044-3050
27 GHz Silicon-Contacted Waveguide-Coupled Ge/Si Avalanche Photodiode
We report a silicon-contacted Ge/Si avalanche photodiode with RF gain of 11 and a bandwidth of 27 GHz at -12 V operating at 1310 nm. The device is fabricated in an established Si photonics platform without additional process complexity and contacts only on Si. Wafer-scale performance data are presented confirming the reproducibility and the manufacturability of the device. Wide open eye diagrams are demonstrated for 25, 40 and 50 Gbps data-rates. The demonstration of such avalanche photodiode shows great potential for improving optical link margins for optical transceivers operating at 400 Gb/s and beyond.
- Open Access
- 26 March 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (3) , 035202
High-quality crystalline yttria-stabilized-zirconia thin layer for photonic applications
Functional oxides are considered as promising materials for photonic applications due to their extraordinary and various optical properties. Especially, yttria-stabilized zirconia (YSZ) has a high refractive index (∼2.15), leading to a good confinement of the optical mode in waveguides. Furthermore, YSZ can also be used as a buffer layer to expand toward a large family of oxides-based thin-films heterostructures. In this paper, we report a complete study of the structural properties of YSZ for the development of integrated optical devices on sapphire in telecom wavelength range. The substrate preparation and the epitaxial growth using pulsed-laser deposition technique have been studied and optimized. High-quality YSZ thin films with remarkably sharp x-ray diffraction rocking curve peaks in range have then been grown on sapphire (0001). It was demonstrated that a thermal annealing of sapphire substrate before the YSZ growth allowed controlling the out-of-plane orientation of the YSZ thin film. Single-mode waveguides were finally designed, fabricated, and characterized for two different main orientations of high-quality YSZ (001) and (111). Propagation loss as low as 2 dB/cm at a wavelength of 1380 nm has been demonstrated for both orientations. These results pave the way for the development of a functional oxides-based photonics platform for numerous applications including on-chip optical communications and sensing.- 26 March 2018
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 2 (3) , 035202
Open AccessHigh-quality crystalline yttria-stabilized-zirconia thin layer for photonic applications
Functional oxides are considered as promising materials for photonic applications due to their extraordinary and various optical properties. Especially, yttria-stabilized zirconia (YSZ) has a high refractive index (∼2.15), leading to a good confinement of the optical mode in waveguides. Furthermore, YSZ can also be used as a buffer layer to expand toward a large family of oxides-based thin-films heterostructures. In this paper, we report a complete study of the structural properties of YSZ for the development of integrated optical devices on sapphire in telecom wavelength range. The substrate preparation and the epitaxial growth using pulsed-laser deposition technique have been studied and optimized. High-quality YSZ thin films with remarkably sharp x-ray diffraction rocking curve peaks in range have then been grown on sapphire (0001). It was demonstrated that a thermal annealing of sapphire substrate before the YSZ growth allowed controlling the out-of-plane orientation of the YSZ thin film. Single-mode waveguides were finally designed, fabricated, and characterized for two different main orientations of high-quality YSZ (001) and (111). Propagation loss as low as 2 dB/cm at a wavelength of 1380 nm has been demonstrated for both orientations. These results pave the way for the development of a functional oxides-based photonics platform for numerous applications including on-chip optical communications and sensing. - Open Access
- 3 August 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (16) , 19468-19478
Dispersion control of silicon nanophotonic waveguides using sub-wavelength grating metamaterials in near- and mid-IR wavelengths
Controlling the group velocity dispersion of silicon nanophotonic waveguides has been recognized as a key ingredient to enhance the development of various on-chip optical applications. However, the strong wavelength dependence of the dispersion in waveguides implemented on the high index contrast silicon-on-insulator (SOI) platform substantially hinders their wideband operation, which in turn, limits their deployment. In this work, we exploit the potential of non-resonant sub-wavelength grating (SWG) nanostructures to perform a flexible and wideband control of dispersion in SOI waveguides. In particular, we demonstrated that the overall dispersion of the SWG-engineered metamaterial waveguides can be tailored across the transparency window of the SOI platform, keeping easy-to-handle single-etch step manufacturing. The SWG silicon waveguides overcladded by silicon nitride exhibit significant reduction of wavelength dependence of dispersion, yet providing intriguing and customizable synthesis of various attractive dispersion profiles. These include large normal up to low anomalous operation regimes, both of which could make a great promise for plethora of emerging applications in silicon photonics.
- 3 August 2017
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (16) , 19468-19478
Open AccessDispersion control of silicon nanophotonic waveguides using sub-wavelength grating metamaterials in near- and mid-IR wavelengths
Controlling the group velocity dispersion of silicon nanophotonic waveguides has been recognized as a key ingredient to enhance the development of various on-chip optical applications. However, the strong wavelength dependence of the dispersion in waveguides implemented on the high index contrast silicon-on-insulator (SOI) platform substantially hinders their wideband operation, which in turn, limits their deployment. In this work, we exploit the potential of non-resonant sub-wavelength grating (SWG) nanostructures to perform a flexible and wideband control of dispersion in SOI waveguides. In particular, we demonstrated that the overall dispersion of the SWG-engineered metamaterial waveguides can be tailored across the transparency window of the SOI platform, keeping easy-to-handle single-etch step manufacturing. The SWG silicon waveguides overcladded by silicon nitride exhibit significant reduction of wavelength dependence of dispersion, yet providing intriguing and customizable synthesis of various attractive dispersion profiles. These include large normal up to low anomalous operation regimes, both of which could make a great promise for plethora of emerging applications in silicon photonics.
- 16 June 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 1024908-1024908-1
Strain-induced Pockels effect in silicon waveguides (Conference Presentation)
- 16 June 2017
- Published by SPIE-Intl Soc Optical Eng
- p. 1024908-1024908-1
Strain-induced Pockels effect in silicon waveguides (Conference Presentation)