Francisco Leonardo Gomes de Menezes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francisco Leonardo Gomes de Menezes has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Edna Maria Mendes Aroucha
Universidade Federal Rural do Semi-Árido, Brasil
4 shared publications - Francisco Klebson Gomes dos Santos
Universidade Federal Rural do Semi-Árido, Brasil
4 shared publications - Ricardo Henrique de Lima Leite
Chemical Processes Laboratory, Engineering Center, Federal Rural University of the Semi-Arid, Mossoró 59625-900, Rio Grande do Norte, Brazil
4 shared publications - Adrianus Indrat Aria
Faculty of Engineering and Applied Sciences, Cranfield University, Bedfordshire MK43 0AL, UK
2 shared publications - Alexandre Santos Pimenta
Universidade Federal do Rio Grande do Norte
2 shared publications - Edgley Alves de Oliveira Paula
Department of Agronomic and Forestry Sciences—DCAF, Federal University of the Semiarid Region—UFERSA, Mossoró 59625-900, RN, Brazil
2 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by MDPI AG in Horticulturae
- Vol. 12 (9) , 1078
Increased Shelf-Life of Hawaiian Papaya by Coatings Based on Chitosan/Cassava Starch Blends Added with TiO2
This study aimed to evaluate the effect of chitosan/cassava starch/TiO2 coatings on the respiratory activity, physicochemical properties, and commercial/postharvest quality attributes (appearance, odour, colour, fungal incidence, shine, and film adhesiveness) of Hawaiian papaya. Three treatments were evaluated: uncoated papaya (control), papaya coated with chitosan/cassava starch (1:1) (CH/ST), and papaya coated with chitosan/cassava starch (1:1) containing 1% TiO2 (CH/ST/T). The fruits were stored under fluorescent light at 22 ± 1 °C and 80% ± 1% RH, for 18 days. The biopolymeric coatings acted as a physical barrier, reducing the respiratory rate and mass loss, delaying senescence-associated metabolic changes and slowing chlorophyll degradation and carotenoid accumulation. The coatings maintain pulp firmness, soluble solids, titratable acidity, and internal quality, resulting in fruits with superior sensory attributes and greater commercial appeal. The coatings also showed good adhesion to the fruit peel, reduced fungal incidence, and maintained desirable odour, colour, shine, and overall acceptance. The coating containing TiO2 (CH/ST/T) was the most effective in extending the shelf life of papaya by six and nine days, compared to fruits treated with TiO2-free coating (CH/ST) and the uncoated control, respectively.
- 1 September 2026
- Published by MDPI AG in Horticulturae
- Vol. 12 (9) , 1078
Open AccessIncreased Shelf-Life of Hawaiian Papaya by Coatings Based on Chitosan/Cassava Starch Blends Added with TiO2
This study aimed to evaluate the effect of chitosan/cassava starch/TiO2 coatings on the respiratory activity, physicochemical properties, and commercial/postharvest quality attributes (appearance, odour, colour, fungal incidence, shine, and film adhesiveness) of Hawaiian papaya. Three treatments were evaluated: uncoated papaya (control), papaya coated with chitosan/cassava starch (1:1) (CH/ST), and papaya coated with chitosan/cassava starch (1:1) containing 1% TiO2 (CH/ST/T). The fruits were stored under fluorescent light at 22 ± 1 °C and 80% ± 1% RH, for 18 days. The biopolymeric coatings acted as a physical barrier, reducing the respiratory rate and mass loss, delaying senescence-associated metabolic changes and slowing chlorophyll degradation and carotenoid accumulation. The coatings maintain pulp firmness, soluble solids, titratable acidity, and internal quality, resulting in fruits with superior sensory attributes and greater commercial appeal. The coatings also showed good adhesion to the fruit peel, reduced fungal incidence, and maintained desirable odour, colour, shine, and overall acceptance. The coating containing TiO2 (CH/ST/T) was the most effective in extending the shelf life of papaya by six and nine days, compared to fruits treated with TiO2-free coating (CH/ST) and the uncoated control, respectively.
- Open Access
Greening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry
The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea–formaldehyde adhesives, challenges persist in terms of water resistance, scalability, cost, and process compatibility. Hybrid systems and novel crosslinking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work highlights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.
Open AccessGreening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry
The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea–formaldehyde adhesives, challenges persist in terms of water resistance, scalability, cost, and process compatibility. Hybrid systems and novel crosslinking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work highlights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.
- Open Access
- 14 October 2025
- Published by MDPI AG in Preprints.org
Greening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry
The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea-formaldehyde adhesives, challenges persist in terms of water re-sistance, scalability, cost, and process compatibility. Hybrid systems and novel cross-linking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work high-lights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.
- 14 October 2025
- Published by MDPI AG in Preprints.org
Open AccessGreening the Bond: A Narrative and Systematic Literature Review on Advancing Sustainable and Non-Toxic Adhesives for the Fiberboard Industry
The fiberboard industry remains heavily reliant on synthetic, formaldehyde-based adhesives, which, despite their cost-effectiveness and strong bonding performance, present significant environmental and human health concerns due to volatile organic compound (VOC) emissions. In response to growing sustainability imperatives and regulatory pressures, the development of non-toxic, renewable, and high-performance bio-based adhesives has emerged as a critical research frontier. This review, conducted through both narrative and systematic approaches, synthesizes current advances in green adhesive technologies with emphasis on lignin, tannin, starch, protein, and hybrid formulations, alongside innovative synthetic alternatives designed to eliminate formaldehyde. The Evidence for Policy and Practice Information and Coordinating Centre (EPPI) framework was applied to ensure a rigorous, transparent, and reproducible methodology, encompassing the identification of research questions, systematic searching, keywording, mapping, data extraction, and in-depth analysis. Results reveal that while bio-based adhesives are increasingly capable of approaching or matching the mechanical strength and durability of urea-formaldehyde adhesives, challenges persist in terms of water re-sistance, scalability, cost, and process compatibility. Hybrid systems and novel cross-linking strategies demonstrate particular promise in overcoming these limitations, paving the way toward industrial viability. The review also identifies critical research gaps, including the need for standardized testing protocols, techno-economic analysis, and life cycle assessment to ensure the sustainable implementation of these solutions. By integrating environmental, economic, and technological perspectives, this work high-lights the transformative potential of green adhesives in transitioning the fiberboard sector toward a low-toxicity, carbon-conscious future. It provides a roadmap for research, policy, and industrial innovation.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 68
Carrageenan, Beeswax and TiO2 Films: Preparation, Characterization and Application in the Conservation of Sugar Apples (Annona squamosa)
Sugar apples are climacteric fruits that had a rapid deterioration due to their high respiration rate and ethylene production, making the application of postharvest technologies essential for extending their shelf life. The objective of this study was to develop an edible coating using carrageenan (CR), beeswax nanoparticle (BW) and titanium dioxide (TD) to extend the shelf life of sugar apples, using ultraviolet (UV) light, to maintain their shelf life at 15 ± 1 °C and 80 ± 1% RH for 12 days. The addition of BW and TD in CR films allowed us to obtain good barrier properties in different concentrations. Based on the results obtained for the water vapor permeability (WVP) value, a concentration of 1.52% of TD and 27.3% of BW was chosen. Coated sugar apples with 1.52% of TD irradiated with UV light managing to delay respiration until day 5 and maintain physical-chemical qualities and visual appearance for nine days, concluding that the edible coating of CR and TD, in the presence of UV light, can extend the shelf life of sugar apples for nine days at 15 ± 1 °C and 80 ± 1% RH.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Brazilian Archives of Biology and Technology
- Vol. 68
Open AccessCarrageenan, Beeswax and TiO2 Films: Preparation, Characterization and Application in the Conservation of Sugar Apples (Annona squamosa)
Sugar apples are climacteric fruits that had a rapid deterioration due to their high respiration rate and ethylene production, making the application of postharvest technologies essential for extending their shelf life. The objective of this study was to develop an edible coating using carrageenan (CR), beeswax nanoparticle (BW) and titanium dioxide (TD) to extend the shelf life of sugar apples, using ultraviolet (UV) light, to maintain their shelf life at 15 ± 1 °C and 80 ± 1% RH for 12 days. The addition of BW and TD in CR films allowed us to obtain good barrier properties in different concentrations. Based on the results obtained for the water vapor permeability (WVP) value, a concentration of 1.52% of TD and 27.3% of BW was chosen. Coated sugar apples with 1.52% of TD irradiated with UV light managing to delay respiration until day 5 and maintain physical-chemical qualities and visual appearance for nine days, concluding that the edible coating of CR and TD, in the presence of UV light, can extend the shelf life of sugar apples for nine days at 15 ± 1 °C and 80 ± 1% RH.
- 1 November 2023
- Published by Walter de Gruyter GmbH in Zeitschrift für Physikalische Chemie
- Vol. 237 (12) , 2019-2035
Potential applications of low-cost Brazilian corn starch as an adsorbent for removing the Acid Violet 19 contaminant from river water
Indeed, the textile dye industry has a significant impact on the global economy, as it is an integral part of the textile and fashion industries. However, this advancement has become a great concern with industrial waste, a good part of these dyes have toxic characteristics to the environment and living beings. The objective of this work is the use of local corn starch as an adsorbent, for the removal of acid violet (AV19), a dye that is highly toxic and carcinogenic in real water samples. The material was characterized by scanning electron microscopy (SEM) and infrared (IR). The optimized parameters were concentration, time, and pH, in which the best results will be obtained at 60 min and pH 7. The experiment was compared to the Langmuir, Freundlich, and Temkin models. The concentration of dye was 4 mg L−1 had the highest removal which was 84.46 %. The prim rate constant isk′ = 0.8592 therefore the adsorption system studied obeys the pseudo-second-order kinetic model. In the next step, we will apply the top-performing starch to environmental samples containing the investigated dye. An analytical curve was constructed in the 2–14 ppm range at a maximum wavelength of 590 nm. The detection limit was 0.541 mg/L, and the percentage recovery was obtained in the range of 95–99.8 % for real water samples.
- 1 November 2023
- Published by Walter de Gruyter GmbH in Zeitschrift für Physikalische Chemie
- Vol. 237 (12) , 2019-2035
Potential applications of low-cost Brazilian corn starch as an adsorbent for removing the Acid Violet 19 contaminant from river water
Indeed, the textile dye industry has a significant impact on the global economy, as it is an integral part of the textile and fashion industries. However, this advancement has become a great concern with industrial waste, a good part of these dyes have toxic characteristics to the environment and living beings. The objective of this work is the use of local corn starch as an adsorbent, for the removal of acid violet (AV19), a dye that is highly toxic and carcinogenic in real water samples. The material was characterized by scanning electron microscopy (SEM) and infrared (IR). The optimized parameters were concentration, time, and pH, in which the best results will be obtained at 60 min and pH 7. The experiment was compared to the Langmuir, Freundlich, and Temkin models. The concentration of dye was 4 mg L−1 had the highest removal which was 84.46 %. The prim rate constant isk′ = 0.8592 therefore the adsorption system studied obeys the pseudo-second-order kinetic model. In the next step, we will apply the top-performing starch to environmental samples containing the investigated dye. An analytical curve was constructed in the 2–14 ppm range at a maximum wavelength of 590 nm. The detection limit was 0.541 mg/L, and the percentage recovery was obtained in the range of 95–99.8 % for real water samples.
- 4 September 2023
- Published by Elsevier in Food Chemistry
- Vol. 433, 137387
TiO2 incorporated into a blend of biopolymeric matrices improves film properties and affects the postharvest conservation of papaya fruits under UV light
- 4 September 2023
- Published by Elsevier in Food Chemistry
- Vol. 433, 137387
TiO2 incorporated into a blend of biopolymeric matrices improves film properties and affects the postharvest conservation of papaya fruits under UV light
- 12 August 2020
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 44 (11)
Extended shelf life of melons using chitosan and graphene oxide‐based biodegradable bags
- 12 August 2020
- Published by Wiley in Journal of Food Processing and Preservation
- Vol. 44 (11)
Extended shelf life of melons using chitosan and graphene oxide‐based biodegradable bags