XDXiaojie Dang

Xiaojie Dang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaojie Dang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quasi‐Helmholtz projector including multibranch Rao‐Wilton‐Glisson basis functions for multiscale objects at low frequency

    by Yu Wang, Xiaojie Dang, Ming‐Da Zhu

    In this letter, a Quasi‐Helmholtz Projector method including multibranch Rao‐Wilton‐Glisson (MB‐RWG) basis function to calculate the scattering problem of multiscale targets at low frequencies is proposed. The loop basis function and the star basis function including MB‐RWG basis function are constructed, and the loop basis function and the star basis function including MB‐RWG basis function are used to construct the Quasi‐Helmholtz Projector. The proposed method is coined MB‐Quasi‐Helmholtz Projector (MB‐QHP) method. The MB‐QHP method can effectively solve the low frequency breakdown (LFB) problem in electric field integral equation (EFIE). Compared with the MB‐loop‐star method, the condition number is lower, the convergence is faster, and the search for global loop is avoided. Meanwhile, due to the existence of the MB‐RWG basis function, the proposed method can divide the calculation region into several regions with different mesh sizes. Numerical example shows the advantages of the proposed method.

  • Theory Models of Electromagnetic Metamaterials and Metasurfaces

    by Long Li, Yan Shi, Haixia Liu, Xiaojie Dang

  • Open Access

    Application of multibranch linear–linear basis function for multiscale dielectric targets simulation

    by Yu Wang, Yu‐Jia Zou, Xiaojie Dang, Ming‐Da Zhu, Xun‐Wang Zhao, Yu Zhang

    Here, the multibranch linear–linear basis function (MB‐LL) is applied to the Poggio–Miller–Chang–Harrington–Wu–Tsai equation for calculating the scattering problem of multi‐scale dielectric targets. The MB‐LL basis function replaces the positive and negative triangles of the traditional linear–linear basis function (LL) with multiple branches, so it can be used at the junction of the meshes of different size. By using the MB‐LL basis function, we can easily divide the calculation region into several non‐overlapping regions, which is very suitable for the simulation of multiscale targets. At the same time, the MB‐LL basis function inherits the properties of the LL basis function, which is more accurate than the multibranch Rao–Wilton–Glisson (MB‐RWG) basis function. Numerical examples demonstrate the advantages of the proposed method.

  • Open Access

    An efficient adaptive h‐refinement for the RWG‐based electric field integral equation applied to antennas with waveport

    by Ning Ding, Lei Yin, Xunwang Zhao, ZhongChao Lin, Yu Zhang, Aiwen Luo, Xiaojie Dang

    An approximation scheme that combines approximate solutions with error estimators to accelerate the adaptive h‐refinement of the RWG‐based method of moments (MoM) with the electric field integral equation (EFIE) is presented. The scheme is effectively implemented by using the near‐field matrix to solve the approximate solution. Several conventional error estimators incorporated with the scheme are investigated. Compared to using the full MoM system, it significantly reduces the computational cost while maintaining the refinement effect. Numerical results indicate that the scheme could accelerate the adaptive refinement, yielding significant reductions in computational time and memory requirements.


  • A Novel Multibranch Linear-Linear Basis Function for Improving the Accuracy of Multiscale PEC Scattering Analysis

    by Yu Wang, Yu-Jia Zou, Xiao-Jie Dang, Ming-Da Zhu, Xun-Wang Zhao

    A novel multibranch linear-linear (MB-LL) basis function is proposed to improve accuracies of the magnetic field integral equation (MFIE) and the combined-field integral equation (CFIE). The MB-LL basis function inherits the merits of conventional linear-linear basis function. By using the basis function, the positive and negative triangles can be replaced by multiple branches, thereby allowing the use of different mesh density in each region of the simulation. Compared with the multibranch Rao-Wilton-Glisson (MB-RWG) basis function, the MB-LL basis function can be applied to effectively improve the calculation accuracies of MFIE and CFIE. Several numerical examples show that the MB-LL basis function can be used for improving the accuracies and to reducing the computational consumptions. It is a robust approach for the analysis of multiscale targets.


  • High-Efficiency Omnidirectional Wireless Power Transfer System

    by Xiaojie Dang, Prasad Jayathurathnage, Fu Liu, Shamsul Arefeen Al Mahmud, Constantin R. Simovski, Sergei A. Tretyakov

    To achieve omnidirectional wireless power transfer (WPT), it is crucial to tune the direction of the total magnetic field from the transmitter (Tx) coils toward the receiver coil (Rx) that can be placed at different positions with respect to Tx. Several methods, such as amplitude modulation, phase-shifting, and frequency modulation, have been proposed to vary the Tx currents, depending on the angular position of Rx, but complex sensing and feedback control systems are required. In this article, we propose an efficient omnidirectional WPT system that is capable of self-tuning the power flow without any feedback from the Rx-side. It only requires a simple Tx current switching rather than complex feedback control system for detecting the Rx position. The proposed system consists of three orthogonal transmitter–repeater (Tx-Rp) channels that deliver power to Rx. In this configuration, the Tx currents are proportional to the mutual coupling between the Rp and Rx in the same channel, which ensures the self-tuning of the optimal power flow through channels. Both theoretical and experimental studies are performed to validate the proposed method. The prototype of the proposed approach enables the Rx to harvest power with almost uniform high efficiency (about 90%) regardless of its angular position.


  • Self-Tuning Omnidirectional Wireless Power Transfer Using Double-Toroidal Helix Coils

    by Prasad Jayathurathnage, Xiaojie Dang, Constantin R. Simovski, Sergei A. Tretyakov

    In this article, we suggest and study a novel omnidirectional wireless power transfer (WPT) system based on unusual double-toroidal helix coils. The suggested antenna is a double-helix coil wounded around a torus. It creates two mutually orthogonal magnetic fields. One is toroidal and confined inside the torus, and another one is poloidal and is distributed outside it. The intensities of these two fields can be independently tuned via the geometry of the turns. The coupling coefficients are tailored to ensure high efficiency regardless of the receiver position and orientation, without active circuitry for tuning or control. This topology provides self-tuning functionality which is achieved when the coupling between the transmitter and receiver is minimized while the coupling in the pairs transmitter–repeater and repeater–receiver is strong. The system consists of three transmitter–repeater pairs orthogonal to each other, ensuring omnidirectional functionality. Experimental results confirm self-tunability and high efficiency for any position and orientation of receivers. The proposed double-helix antenna is applicable to different WPT applications where the coupling/decoupling between coils can be freely controlled.


  • Open Access

    Self-Tuning Multi-Transmitter Wireless Power Transfer to Freely Positioned Receivers

    by Xiaojie Dang, Prasad Jayathurathnage, Sergei A. Tretyakov, Constantin R. Simovski

    Free positioning of receivers is one of the key requirements for many wireless power transfer (WPT) applications, necessary from the end-user point of view. However, realization of stable and effective wireless power transfer for freely positioned receivers is technically challenging because of the need of complex control and tuning circuits. In this paper, we propose a concept of power channeling via an array of repeaters that enables self-tuning of multi-transmitter WPT systems without any sensing or control elements. The proposed WPT system consists of uncoupled transmitters and uncoupled repeaters which form independent power transfer channels. The proposed self-tuning WPT system is capable of maintaining stable output power with constant high efficiency regardless of the receiver position. Namely, our numerical and experimental results for a four-transmitter WPT system in form of a linear array show the efficiency 94.5±2% for any position of the receiver within 20 mm range.


  • Computing Mutual Impedance of Antennas by Spherical Harmonic Transform

    by Haobo Yuan, Hongguang Zhou, Hongwei Liu, Xiaojie Dang, Xi Chen

    The coupling of two antennas can be described with mutual impedance. This paper proposes computing the mutual impedance by reaction theorem, which involves integrating vector products of near fields over a sphere surrounding the second antenna. We express the near fields of both antennas by the vector Spherical Harmonic Transform (SHT), evaluate the near fields of the first antenna on the eccentric sphere by a new FFT/interpolation method efficiently, and then obtain the mutual impedance by the reaction integrals. This new method has a computation complexity of O(N3), where N represents the truncation order in SHT. The comparison with the Higher Order Moment Method (HOMOM) indicates that the proposed method is a fast, accurate, stable and universal method to analyze the coupling of any two antennas.


  • Comments on “The forbidden bandgap characteristic of EBG structures”

    by Xiao‐Jie Dang, Haobo Yuan, Nan Wang, Chang‐Hong Liang

    In a letter by Yang (Microwave Opt Technol Lett 50 (2008), 2965–2967), the bandgap characteristic of a new uniplanar compact electromagnetic bandgap is considered. The authors use the dispersion diagram related to the irreducible Brillouin zone (IBZ) to determine the bandgap. We have already noticed the IBZ used by the letter is not correct, according to the symmetry of the structure. So, the resulted bandgap characteristic is not true. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26153