Agrim Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Agrim Gupta has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Dinesh Bharadia
University of California San Diego, La Jolla, CA, USA
9 shared publications - Nagarjun Bhat
University of California San Diego, La Jolla, CA, USA
4 shared publications - Adel Heidari
UCSD, San Diego, USA
3 shared publications - Harine Govindarajan
Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA, USA
3 shared publications - Ishan Bansal
Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA, USA
3 shared publications - Aaron Tartz
UCSD, San Diego, USA
2 shared publications
Latest Publications
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 722-738
RadioStream: A Wideband Multi-Antenna SDR Platform
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 722-738
Open AccessRadioStream: A Wideband Multi-Antenna SDR Platform
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 57-64
MINT: Modeling GenAI Impact on Network Traffic
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 57-64
Open AccessMINT: Modeling GenAI Impact on Network Traffic
- Open Access
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 113-120
Scripting Traffic, Aligning Power: A 5G Testbed Integrating gNB Activity and Commercial UE Power
On a modern smartphone, the cellular subsystem is one of the largest energy consumers, with power jointly determined by application-layer IP traffic and the gNB's configuration and scheduling decisions. Studying this relationship on real hardware is challenging because the application server, radio activity, and UE are distributed across separate systems, making it difficult to instrument and control them within a single experimental environment. We present a configurable 5G testbed that integrates these components into a unified experimental platform. The platform drives either real Internet applications or arbitrary scripted traffic over the same radio path and links per-slot gNB activity to hardware-measured UE power. As one demonstration of what the resulting dataset enables, we build gNB-Power, an XGBoost estimator that predicts commercial UE power from gNB-observable features alone, roughly halving the error of the standardized TR 38.840 baseline and transferring from synthetic to real applications on this testbed. The platform offers a flexible measurement primitive for UE power-saving studies, enabling controlled investigation of how both application-layer and network-side decisions affect UE energy consumption.
- 26 October 2026
- Published by Association for Computing Machinery (ACM)
- p. 113-120
Open AccessScripting Traffic, Aligning Power: A 5G Testbed Integrating gNB Activity and Commercial UE Power
On a modern smartphone, the cellular subsystem is one of the largest energy consumers, with power jointly determined by application-layer IP traffic and the gNB's configuration and scheduling decisions. Studying this relationship on real hardware is challenging because the application server, radio activity, and UE are distributed across separate systems, making it difficult to instrument and control them within a single experimental environment. We present a configurable 5G testbed that integrates these components into a unified experimental platform. The platform drives either real Internet applications or arbitrary scripted traffic over the same radio path and links per-slot gNB activity to hardware-measured UE power. As one demonstration of what the resulting dataset enables, we build gNB-Power, an XGBoost estimator that predicts commercial UE power from gNB-observable features alone, roughly halving the error of the standardized TR 38.840 baseline and transferring from synthetic to real applications on this testbed. The platform offers a flexible measurement primitive for UE power-saving studies, enabling controlled investigation of how both application-layer and network-side decisions affect UE energy consumption.
- Open Access
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 696-697
Demo Abstract - SIGAR: Sensor Integration Gateway using Augmented Reality
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 696-697
Open AccessDemo Abstract - SIGAR: Sensor Integration Gateway using Augmented Reality
- Open Access
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 1757-1759
ZenseTag: An RFID assisted Twin-Tag Single Antenna COTS Sensor Interface
Sensing allows us to interact with and quantify the natural world. Despite the advancements in sensor versatility, sensing systems still suffer from limited adoption due to their dependence on batteries, complex interfaces, energy-harvesting modules, and readout latency. To address these challenges, we present ZenseTag --- a miniaturized, sticker-like platform that can interface commercial sensors directly with COTS RFID tags. ZenseTag exploits the impedance response of COTS sensors to the measured stimulus at Radio Frequencies, tuned to the UHF RFID band. It combines reliable hardware realization of differential analog sensing with robust software for accurate, low-latency sensor readouts, even in the presence of multipath effects.
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 1757-1759
Open AccessZenseTag: An RFID assisted Twin-Tag Single Antenna COTS Sensor Interface
Sensing allows us to interact with and quantify the natural world. Despite the advancements in sensor versatility, sensing systems still suffer from limited adoption due to their dependence on batteries, complex interfaces, energy-harvesting modules, and readout latency. To address these challenges, we present ZenseTag --- a miniaturized, sticker-like platform that can interface commercial sensors directly with COTS RFID tags. ZenseTag exploits the impedance response of COTS sensors to the measured stimulus at Radio Frequencies, tuned to the UHF RFID band. It combines reliable hardware realization of differential analog sensing with robust software for accurate, low-latency sensor readouts, even in the presence of multipath effects.
- Open Access
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 2248-2250
3 W's of smartphone power consumption: Who, Where and How much is draining my battery?
With 6.5 billion smartphones in use worldwide, each relying on a battery for key subsystems like display, compute, and cellular connectivity, previous studies on power consumption often used invalidated indirect estimates that failed to isolate specific hardware usage. We address this by utilizing Google's On Device Power Rails Monitor (ODPM) tool for precise power measurements of individual components. Our findings indicate that connectivity (Wi-Fi, 4G/5G) and screen display are the primary power consumers, as shown with the Google Pixel 7A. We also confirmed similar power consumption trends using an energy estimation method on the Samsung S23+. Given the prevalence of smartphones, we discuss the challenges and opportunities for optimizing power usage.
- 4 December 2024
- Published by Association for Computing Machinery (ACM)
- p. 2248-2250
Open Access3 W's of smartphone power consumption: Who, Where and How much is draining my battery?
With 6.5 billion smartphones in use worldwide, each relying on a battery for key subsystems like display, compute, and cellular connectivity, previous studies on power consumption often used invalidated indirect estimates that failed to isolate specific hardware usage. We address this by utilizing Google's On Device Power Rails Monitor (ODPM) tool for precise power measurements of individual components. Our findings indicate that connectivity (Wi-Fi, 4G/5G) and screen display are the primary power consumers, as shown with the Google Pixel 7A. We also confirmed similar power consumption trends using an energy estimation method on the Samsung S23+. Given the prevalence of smartphones, we discuss the challenges and opportunities for optimizing power usage.
- Open Access
- 4 November 2024
- Published by Association for Computing Machinery (ACM)
- p. 336-350
ZenseTag: An RFID assisted Twin-Tag Single Antenna COTS Sensor Interface
Sensors enable us to digitally capture stimuli like moisture, light, and force. Despite their low cost, reliability, and scalability, the lack of widespread adoption of IoT has hindered the realization of true ubiquitous sensing. A likely reason is that the current sensor platforms are bulky due to the batteries and complex electronics needed to interface sensors communication systems. In this work, we present a fully-passive, miniaturized, flexible form factor sensor interface titled ZenseTag that uses minimal electronics to read and communicate analog sensor data, directly at radio frequencies (RF). We exploit the fundamental principle of resonance, where a sensor's terminal impedance becomes most sensitive to the measured stimulus at its resonant frequency. This enables ZenseTag to read out the sensor variation using only energy harvested from wireless signals. We demonstrate its implementation with a 15x10mm flexible PCB that connects sensors to a printed antenna and passive RFID ICs, enabling near real-time readout through a performant GUI-enabled software. We showcase ZenseTag's versatility by interfacing commercial force, soil moisture and photodiode sensors [1--3]. Further, we motivate dedicated application studies for these sensors.
- 4 November 2024
- Published by Association for Computing Machinery (ACM)
- p. 336-350
Open AccessZenseTag: An RFID assisted Twin-Tag Single Antenna COTS Sensor Interface
Sensors enable us to digitally capture stimuli like moisture, light, and force. Despite their low cost, reliability, and scalability, the lack of widespread adoption of IoT has hindered the realization of true ubiquitous sensing. A likely reason is that the current sensor platforms are bulky due to the batteries and complex electronics needed to interface sensors communication systems. In this work, we present a fully-passive, miniaturized, flexible form factor sensor interface titled ZenseTag that uses minimal electronics to read and communicate analog sensor data, directly at radio frequencies (RF). We exploit the fundamental principle of resonance, where a sensor's terminal impedance becomes most sensitive to the measured stimulus at its resonant frequency. This enables ZenseTag to read out the sensor variation using only energy harvested from wireless signals. We demonstrate its implementation with a 15x10mm flexible PCB that connects sensors to a printed antenna and passive RFID ICs, enabling near real-time readout through a performant GUI-enabled software. We showcase ZenseTag's versatility by interfacing commercial force, soil moisture and photodiode sensors [1--3]. Further, we motivate dedicated application studies for these sensors.
- Open Access
- 2 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 1-17
GreenMO: Enabling Virtualized, Sustainable Massive MIMO with a Single RF Chain
With the turn of new decade, wireless communications face a major challenge on connecting many more new users and devices, at the same time being energy efficient and minimizing its carbon footprint. However, the current approaches to address the growing number of users and spectrum demands, like Massive MIMO, demand exorbitant energy consumption. The reason is that traditionally Massive MIMO requires a digital beamforming architecture that needs a separate RF chain per antenna, so the power consumption scales with number of antennas. Instead, GreenMO creates a new Massive MIMO architecture with just a single physically laid RF chain, shared by all the antennas and introduces for the first time, the concept of virtualizing the RF chain hardware. That is, GreenMO creates an optimal number of virtual RF chains to serve a given number of spatial streams, depending on channel conditions and network load. Due to efficient, softwarized control over the number of virtual RF chains, GreenMO paves the way for green and flexible massive MIMO. We prototype GreenMO on a PCB with eight antennas and evaluate it with a WARPv3 SDR platform in an office environment. The results demonstrate that GreenMO is 3× more power-efficient than traditional Massive MIMO and 4× more spectrum-efficient than traditional OFDMA systems, while multiplexing 4 spatial streams, and can save upto 50% power in modern 5G NR base stations.
- 2 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 1-17
Open AccessGreenMO: Enabling Virtualized, Sustainable Massive MIMO with a Single RF Chain
With the turn of new decade, wireless communications face a major challenge on connecting many more new users and devices, at the same time being energy efficient and minimizing its carbon footprint. However, the current approaches to address the growing number of users and spectrum demands, like Massive MIMO, demand exorbitant energy consumption. The reason is that traditionally Massive MIMO requires a digital beamforming architecture that needs a separate RF chain per antenna, so the power consumption scales with number of antennas. Instead, GreenMO creates a new Massive MIMO architecture with just a single physically laid RF chain, shared by all the antennas and introduces for the first time, the concept of virtualizing the RF chain hardware. That is, GreenMO creates an optimal number of virtual RF chains to serve a given number of spatial streams, depending on channel conditions and network load. Due to efficient, softwarized control over the number of virtual RF chains, GreenMO paves the way for green and flexible massive MIMO. We prototype GreenMO on a PCB with eight antennas and evaluate it with a WARPv3 SDR platform in an office environment. The results demonstrate that GreenMO is 3× more power-efficient than traditional Massive MIMO and 4× more spectrum-efficient than traditional OFDMA systems, while multiplexing 4 spatial streams, and can save upto 50% power in modern 5G NR base stations.
- Open Access
- 27 March 2023
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 7 (1) , 1-32
ForceSticker
Any two objects in contact with each other exert a force that could be simply due to gravity or mechanical contact, such as any ubiquitous object exerting weight on a platform or the contact between two bones at our knee joints. The most ideal way of capturing these contact forces is to have a flexible force sensor which can conform well to the contact surface. Further, the sensor should be thin enough to not affect the contact physics between the two objects. In this paper, we showcase the design of such thin, flexible sticker-like force sensors dubbed as 'ForceStickers', ushering into a new era of miniaturized force sensors. ForceSticker achieves this miniaturization by creating new class of capacitive force sensors which avoid both batteries, as well as wires. The wireless and batteryless readout is enabled via hybrid analog-digital backscatter, by piggybacking analog sensor data onto a digitally identified RFID link. Hence, ForceSticker finds natural applications in space and battery-constraint in-vivo usecases, like force-sensor backed orthopaedic implants, surgical robots. Further, ForceSticker finds applications in ubiquiti-constraint scenarios. For example, these force-stickers enable cheap, digitally readable barcodes that can provide weight information, with possible usecases in warehouse integrity checks. To meet these varied application scenarios, we showcase the general framework behind design of ForceSticker. With ForceSticker framework, we design 4mm*2mm sensor prototypes, with two different polymer layers of ecoflex and neoprene rubber, having force ranges of 0-6N and 0-40N respectively, with readout errors of 0.25, 1.6 N error each (10,000 force applications without significant error degradation. We also showcase two case-studies onto the possible applications of ForceSticker: sensing forces from a toy knee-joint model and integrity checks of warehouse packaging.
- 27 March 2023
- Published by Association for Computing Machinery (ACM) in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
- Vol. 7 (1) , 1-32
Open AccessForceSticker
Any two objects in contact with each other exert a force that could be simply due to gravity or mechanical contact, such as any ubiquitous object exerting weight on a platform or the contact between two bones at our knee joints. The most ideal way of capturing these contact forces is to have a flexible force sensor which can conform well to the contact surface. Further, the sensor should be thin enough to not affect the contact physics between the two objects. In this paper, we showcase the design of such thin, flexible sticker-like force sensors dubbed as 'ForceStickers', ushering into a new era of miniaturized force sensors. ForceSticker achieves this miniaturization by creating new class of capacitive force sensors which avoid both batteries, as well as wires. The wireless and batteryless readout is enabled via hybrid analog-digital backscatter, by piggybacking analog sensor data onto a digitally identified RFID link. Hence, ForceSticker finds natural applications in space and battery-constraint in-vivo usecases, like force-sensor backed orthopaedic implants, surgical robots. Further, ForceSticker finds applications in ubiquiti-constraint scenarios. For example, these force-stickers enable cheap, digitally readable barcodes that can provide weight information, with possible usecases in warehouse integrity checks. To meet these varied application scenarios, we showcase the general framework behind design of ForceSticker. With ForceSticker framework, we design 4mm*2mm sensor prototypes, with two different polymer layers of ecoflex and neoprene rubber, having force ranges of 0-6N and 0-40N respectively, with readout errors of 0.25, 1.6 N error each (10,000 force applications without significant error degradation. We also showcase two case-studies onto the possible applications of ForceSticker: sensing forces from a toy knee-joint model and integrity checks of warehouse packaging.
- 14 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (4) , 2592-2605
Power-Efficient Analog Front-End Interference Suppression With Binary Antennas
Digital and analog beamforming are well-known methods to suppress interference using multiple-antenna structures, but they have practical limitations: (i) Digital beamforming requires multiple analog-to-digital converters (ADCs) to enable digital conversion, which increases the cost and complexity; (ii) Although analog beamforming does not require expensive ADCs, it uses phase shifters, which cause quantization errors, insertion losses, and reduced power efficiency. In this paper, we consider a K -user uplink interference channel and propose a low-complexity algorithmic interference-suppression solution relying on simple switch-based reconfigurable antennas at the receivers. We utilize switches to enable/disable antennas to maximize each user’s signal-to-interference-plus-noise ratio (SINR). We present an optimization approach to approximate the optimal solution. To evaluate the results, we compare our method with relevant benchmarks. Moreover, we derive a lower bound on the minimum number of antenna elements per receiver to attain the desired SINR and verify the findings via simulations.
- 14 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 22 (4) , 2592-2605
Power-Efficient Analog Front-End Interference Suppression With Binary Antennas
Digital and analog beamforming are well-known methods to suppress interference using multiple-antenna structures, but they have practical limitations: (i) Digital beamforming requires multiple analog-to-digital converters (ADCs) to enable digital conversion, which increases the cost and complexity; (ii) Although analog beamforming does not require expensive ADCs, it uses phase shifters, which cause quantization errors, insertion losses, and reduced power efficiency. In this paper, we consider a K -user uplink interference channel and propose a low-complexity algorithmic interference-suppression solution relying on simple switch-based reconfigurable antennas at the receivers. We utilize switches to enable/disable antennas to maximize each user’s signal-to-interference-plus-noise ratio (SINR). We present an optimization approach to approximate the optimal solution. To evaluate the results, we compare our method with relevant benchmarks. Moreover, we derive a lower bound on the minimum number of antenna elements per receiver to attain the desired SINR and verify the findings via simulations.