Everton Pereira-Andrade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Everton Pereira-Andrade has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Angelo Malachias
Departamento de Física, ICEx, Universidade Federal de Minas Gerais - UFMG, Av. Antonio Carlos, 6627, Belo Horizonte - MG, CEP 30123-970, Brazil
9 shared publications - Gustavo de Almeida Magalhães Safar
Departamento de Física, Instituto de Ciências Exatas, Universidade Federal de Minas Gerais, Av. Antônio Carlos, 6627, 31270-901 Belo Horizonte, Minas Gerais, Brazil
6 shared publications - Gilberto Rodrigues-Junior
Departamento De Física Universidade Federal de Viçosa Viçosa Minas Gerais Brasil
3 shared publications - Rafael Reis Barreto
Federal University of Minas Gerais
3 shared publications - Sukarno Olavo Ferreira
Department of Physics, Federal University of Viçosa 2 , Viçosa, Minas Gerais 36570-900
3 shared publications Atílio Pedroni
2 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 43 (10) , e70131
Growth and Transfer of Large‐Area Bi 2 Te 3 Thin Films Using Silicon‐On‐Insulator Technology
Semiconductor nanomembranes offer a scalable platform for integrating layered topological insulators onto arbitrary host substrates. The integration of topological insulator and nanomembrane technologies, such as silicon‐on‐insulator (SOI), remains underexplored, despite the importance of these materials for building flexible quantum devices. This work reports the growth, fabrication, and structural characterization of freestanding Bi 2 Te 3 /Si(111) heterostructure membranes. 50 nm‐thick Bi 2 Te 3 layers were epitaxially grown by molecular beam epitaxy (MBE) on commercial silicon‐on‐insulator SOI(111) substrates. Using a spin‐coating nail‐polish layer over the Bi 2 Te 3 surface to protect it during the fabrication process, a sacrificial layer (buried oxide layer) was selective wet‐etched using a hydrofluoric acid solution. Post‐transfer, high‐resolution x‐ray diffraction measurements confirm that the transfer process preserves the high crystalline quality of the Bi 2 Te 3 layer. Finally, scanning tunneling microscopy indicates well‐defined terraces, demonstrating that the transfer procedure preserves the surface morphology, while scanning tunneling spectroscopy shows band gap values along the surface of the transferred Bi 2 Te 3 layer in good agreement with values expected for Bi 2 Te 3 semiconductor material. Our results point towards integration between topological insulators and already established technological platforms based on silicon membranes.
- 16 September 2026
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 43 (10) , e70131
Open AccessGrowth and Transfer of Large‐Area Bi 2 Te 3 Thin Films Using Silicon‐On‐Insulator Technology
Semiconductor nanomembranes offer a scalable platform for integrating layered topological insulators onto arbitrary host substrates. The integration of topological insulator and nanomembrane technologies, such as silicon‐on‐insulator (SOI), remains underexplored, despite the importance of these materials for building flexible quantum devices. This work reports the growth, fabrication, and structural characterization of freestanding Bi 2 Te 3 /Si(111) heterostructure membranes. 50 nm‐thick Bi 2 Te 3 layers were epitaxially grown by molecular beam epitaxy (MBE) on commercial silicon‐on‐insulator SOI(111) substrates. Using a spin‐coating nail‐polish layer over the Bi 2 Te 3 surface to protect it during the fabrication process, a sacrificial layer (buried oxide layer) was selective wet‐etched using a hydrofluoric acid solution. Post‐transfer, high‐resolution x‐ray diffraction measurements confirm that the transfer process preserves the high crystalline quality of the Bi 2 Te 3 layer. Finally, scanning tunneling microscopy indicates well‐defined terraces, demonstrating that the transfer procedure preserves the surface morphology, while scanning tunneling spectroscopy shows band gap values along the surface of the transferred Bi 2 Te 3 layer in good agreement with values expected for Bi 2 Te 3 semiconductor material. Our results point towards integration between topological insulators and already established technological platforms based on silicon membranes.
- Open Access
- 5 September 2026
- Published by Elsevier in SSRN Electronic Journal
Stacking-Controlled Filamentary and Interfacial Switching in TiO2/TiSe2 Hybrid Heterostructures
The influence of stacking sequence on resistive switching was investigated in TiO2/TiSe2 hybrid heterostructures. Isolated TiO2 devices exhibit oxygen-vacancy-mediated filamentary switching, whereas TiSe2 displays interface-controlled hysteresis concentrated near zero bias. Hybrid devices combine signatures of both transport regimes, resulting in electrical responses that depend strongly on layer arrangement. The Ti/TiSe2/TiO2 architecture exhibits the highest switching contrast, reaching an ION/IOFF ratio of approximately 8 after 30 cycles, while the Ti/TiO2/TiSe2 configuration shows a stronger filamentary contribution. EFM and Raman measurements reveal localized modifications induced by electrical stressing and indicate the involvement of oxygen-related defect dynamics in the switching process. The results demonstrate that stacking sequence governs the balance between filamentary and interfacial transport, highlighting interface engineering as an effective route for tailoring memristive behavior in oxide/TMD heterostructures.
- 5 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStacking-Controlled Filamentary and Interfacial Switching in TiO2/TiSe2 Hybrid Heterostructures
The influence of stacking sequence on resistive switching was investigated in TiO2/TiSe2 hybrid heterostructures. Isolated TiO2 devices exhibit oxygen-vacancy-mediated filamentary switching, whereas TiSe2 displays interface-controlled hysteresis concentrated near zero bias. Hybrid devices combine signatures of both transport regimes, resulting in electrical responses that depend strongly on layer arrangement. The Ti/TiSe2/TiO2 architecture exhibits the highest switching contrast, reaching an ION/IOFF ratio of approximately 8 after 30 cycles, while the Ti/TiO2/TiSe2 configuration shows a stronger filamentary contribution. EFM and Raman measurements reveal localized modifications induced by electrical stressing and indicate the involvement of oxygen-related defect dynamics in the switching process. The results demonstrate that stacking sequence governs the balance between filamentary and interfacial transport, highlighting interface engineering as an effective route for tailoring memristive behavior in oxide/TMD heterostructures.
- Open Access
- 14 August 2026
- Published by Elsevier in Applied Surface Science
- Vol. 750
van der Waals epitaxy of MnTe on Bi2Te3: Toward altermagnetic-topological hybrid systems
- 14 August 2026
- Published by Elsevier in Applied Surface Science
- Vol. 750
Open Accessvan der Waals epitaxy of MnTe on Bi2Te3: Toward altermagnetic-topological hybrid systems
- Open Access
- 15 June 2026
- Published by Elsevier in SSRN Electronic Journal
van der Waals epitaxy of MnTe on Bi2Te3: Toward altermagnetic-topological hybrid systems
We report the molecular beam epitaxial growth of MnTe/Bi₂Te₃ heterostructures on BaF₂ (111), muscovite mica and amorphous glass substrates by molecular beam epitaxy (MBE). High-resolution X-ray diffraction (HRXRD) reveals clear epitaxial alignment and highlights the critical role of the substrate in determining structural quality. Owing to the close lattice matching between Bi₂Te₃ and BaF₂ (111), films grown on this substrate exhibit superior crystallinity, which directly enhances the structural coherence of the MnTe overlayer. In contrast, growth on mica and amorphous glass results in reduced crystalline order. Scanning tunneling spectroscopy measurements identify an electronic bandgap consistent with the α-MnTe phase. Complementary resonant inelastic X-ray scattering (RIXS) measurements provide insight into electronic excitations, further supporting the formation of the α-MnTe phase and its associated magnetic order. The combination of high crystalline quality and well-defined electronic and magnetic excitations establishes MnTe/Bi₂Te₃ heterostructures on BaF₂ (111) as a promising platform for investigating the interplay between topological states and altermagnetic order, with potential implications for spintronic and quantum device applications.
- 15 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open Accessvan der Waals epitaxy of MnTe on Bi2Te3: Toward altermagnetic-topological hybrid systems
We report the molecular beam epitaxial growth of MnTe/Bi₂Te₃ heterostructures on BaF₂ (111), muscovite mica and amorphous glass substrates by molecular beam epitaxy (MBE). High-resolution X-ray diffraction (HRXRD) reveals clear epitaxial alignment and highlights the critical role of the substrate in determining structural quality. Owing to the close lattice matching between Bi₂Te₃ and BaF₂ (111), films grown on this substrate exhibit superior crystallinity, which directly enhances the structural coherence of the MnTe overlayer. In contrast, growth on mica and amorphous glass results in reduced crystalline order. Scanning tunneling spectroscopy measurements identify an electronic bandgap consistent with the α-MnTe phase. Complementary resonant inelastic X-ray scattering (RIXS) measurements provide insight into electronic excitations, further supporting the formation of the α-MnTe phase and its associated magnetic order. The combination of high crystalline quality and well-defined electronic and magnetic excitations establishes MnTe/Bi₂Te₃ heterostructures on BaF₂ (111) as a promising platform for investigating the interplay between topological states and altermagnetic order, with potential implications for spintronic and quantum device applications.
- Open Access
- 29 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (36) , 16147-16154
Multiple Quasiparticle Interactions in Molecularly Functionalized h-BN Polaritonic Systems
- 29 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (36) , 16147-16154
Open AccessMultiple Quasiparticle Interactions in Molecularly Functionalized h-BN Polaritonic Systems
- Open Access
- 29 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (3) , 1997-2002
Investigation of the Impact of Thionine Functionalization on Magnetoelastic Sensor Performance
This study investigates the functionalization of gold-coated magnetoelastic sensors with thionine molecules, focusing on resonance frequency shifts. The functionalization process was characterized by using Raman spectroscopy and analyzed via scanning electron microscopy and atomic force microscopy, revealing the progressive formation of molecular clusters over time. Our results demonstrate that longer functionalization time leads to saturation of surface coverage and cluster formation, impacting the sensor's resonance frequency shifts. Such modifications offer insights into the adsorption process of these molecules on the sensor's gold surface, as well as its performance.
- 29 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (3) , 1997-2002
Open AccessInvestigation of the Impact of Thionine Functionalization on Magnetoelastic Sensor Performance
This study investigates the functionalization of gold-coated magnetoelastic sensors with thionine molecules, focusing on resonance frequency shifts. The functionalization process was characterized by using Raman spectroscopy and analyzed via scanning electron microscopy and atomic force microscopy, revealing the progressive formation of molecular clusters over time. Our results demonstrate that longer functionalization time leads to saturation of surface coverage and cluster formation, impacting the sensor's resonance frequency shifts. Such modifications offer insights into the adsorption process of these molecules on the sensor's gold surface, as well as its performance.
- 16 February 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (11) , 5794-5801
Evidence of thickness-dependent surface-induced ferroelectricity in few-layer germanium sulfide obtained via scanning tunneling spectroscopy
An overview of an STM tip with positive and negative biases, a schematic of the GeS polarization switching, and thickness-dependent STS curves.
- 16 February 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (11) , 5794-5801
Evidence of thickness-dependent surface-induced ferroelectricity in few-layer germanium sulfide obtained via scanning tunneling spectroscopy
An overview of an STM tip with positive and negative biases, a schematic of the GeS polarization switching, and thickness-dependent STS curves.
- 20 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (1) , 1650-1658
Scanning Tunneling Spectroscopy Method for the Prediction of Semiconductor Heterojunction Performance as a Prequel for Device Development
The prediction of semiconductor device performance is a persistent challenge in materials science, and the ability to anticipate useful specifications prior to construction is crucial for enhancing the overall efficiency. In this study, we investigate the constituents of a solar cell by employing scanning tunneling microscopy (STM) and spectroscopy (STS). Through our observations, we identify a spatial distribution of the dopant type in thin films of materials that were designed to present major p-doping for germanium sulfide (GeS) and dominant n-doping for tin disulfide (SnS2). By generating separate STS maps for each semiconductor film and conducting a statistical analysis of the gap and doping distribution, we determine intrinsic limitations for the solar cell efficiency that must be understood prior to processing. Subsequently, we fabricate a solar cell utilizing these materials (GeS and SnS2) via vapor phase deposition and carry out a characterization using standard J-V curves under both dark/illuminated irradiance conditions. Our devices corroborate the expected reduced efficiency due to doping fluctuation but exhibit stable photocurrent responses. As originally planned, quantum efficiency measurements reveal that the peak efficiency of our solar cell coincides with the range where the standard silicon solar cells sharply decline. Our STS method is suggested as a prequel to device development in novel material junctions or deposition processes where fluctuations of doping levels are retrieved due to intrinsic material characteristics such as the occurrence of defects, roughness, local chemical segregation, and faceting or step bunching.
- 20 December 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (1) , 1650-1658
Scanning Tunneling Spectroscopy Method for the Prediction of Semiconductor Heterojunction Performance as a Prequel for Device Development
The prediction of semiconductor device performance is a persistent challenge in materials science, and the ability to anticipate useful specifications prior to construction is crucial for enhancing the overall efficiency. In this study, we investigate the constituents of a solar cell by employing scanning tunneling microscopy (STM) and spectroscopy (STS). Through our observations, we identify a spatial distribution of the dopant type in thin films of materials that were designed to present major p-doping for germanium sulfide (GeS) and dominant n-doping for tin disulfide (SnS2). By generating separate STS maps for each semiconductor film and conducting a statistical analysis of the gap and doping distribution, we determine intrinsic limitations for the solar cell efficiency that must be understood prior to processing. Subsequently, we fabricate a solar cell utilizing these materials (GeS and SnS2) via vapor phase deposition and carry out a characterization using standard J-V curves under both dark/illuminated irradiance conditions. Our devices corroborate the expected reduced efficiency due to doping fluctuation but exhibit stable photocurrent responses. As originally planned, quantum efficiency measurements reveal that the peak efficiency of our solar cell coincides with the range where the standard silicon solar cells sharply decline. Our STS method is suggested as a prequel to device development in novel material junctions or deposition processes where fluctuations of doping levels are retrieved due to intrinsic material characteristics such as the occurrence of defects, roughness, local chemical segregation, and faceting or step bunching.
- Open Access
- 21 December 2021
- Published by Wiley in Chemphyschem
- Vol. 23 (4) , e202100752
The Special Case of the Spectral Emission of a Tb3+ Mono Metal Complex
The fine structure in the spectral lines of the visible fluorescence of Tb3+ complexes are replaced by a single peak in the case of a singular molecular complex Tb(H3PTC)3, where H4PTC represents perylene‐3,4,9,10‐tetracarboxylic acid, and its emission wavelength depends on the film thickness. This single peak challenges the old creed that the f‐orbital electrons of Tb3+ are always protected from the influence of the surrounding atoms. We perform density functional theory calculations to show that the wavefunction of the ground state is localized and in addition, spin‐polarized, and this facilitates fluorescent transitions under UV to the first excited state instead of the fundamental state. We discuss the possibility of making a spintronic device with the molecule, Tb(H3PTC)3.
- 21 December 2021
- Published by Wiley in Chemphyschem
- Vol. 23 (4) , e202100752
Open AccessThe Special Case of the Spectral Emission of a Tb3+ Mono Metal Complex
The fine structure in the spectral lines of the visible fluorescence of Tb3+ complexes are replaced by a single peak in the case of a singular molecular complex Tb(H3PTC)3, where H4PTC represents perylene‐3,4,9,10‐tetracarboxylic acid, and its emission wavelength depends on the film thickness. This single peak challenges the old creed that the f‐orbital electrons of Tb3+ are always protected from the influence of the surrounding atoms. We perform density functional theory calculations to show that the wavefunction of the ground state is localized and in addition, spin‐polarized, and this facilitates fluorescent transitions under UV to the first excited state instead of the fundamental state. We discuss the possibility of making a spintronic device with the molecule, Tb(H3PTC)3.