Tatyana Uryumtseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tatyana Uryumtseva has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Aliya Kydyrbekova
Department of Management, L.N. Gumilyov Eurasian National University, Satpayev Street 2, Astana 010000, Kazakhstan
2 shared publications - Artem S. Gorelik
Ural Institute of the State Fire Service of the Ministry of Emergency Situations
2 shared publications - D. I. Vorobyev
Moscow State University of Technologies and Management named after K. G. Razumovsky (The First Cossack University)
2 shared publications - Kulyash Meiramkulova
Department of Environmental Engineering and Management, L.N. Gumilyov Eurasian National University, Satpayev Str. 2, Astana 010000, Kazakhstan
2 shared publications - M. V. Temerbayeva
Innovative University of Eurasia
2 shared publications - Maksim Borisovich Rebezov
Ural State Agrarian University; Gorbatov Research Center for Food Systems
2 shared publications
Latest Publications
- Open Access
- 21 November 2024
- Published by Agrarian Science in Agrarian science
- No. 11,p. 67-74
Productive qualities of cows against the background of the use of mineral feed additives
Relevance. Holstein dairy cattle are bred in the Sverdlovsk region, its improvement is carried out by selecting and selecting the best for further breeding. In order for them to display their genetic potential of productivity, it is necessary to ensure a balanced diet. The purpose of the work is to evaluate the productive qualities of cows against the background of the use of mineral feed additives.Methods. To conduct the study in a typical breeding reproducer for the region, 3 groups of heifers in the last trimester of pregnancy (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The dairy productivity of cows for the first lactation was assessed by control milking once a month. The fat and protein content in milk was assessed in an average milk sample once a month from each cow. Reproduction indicators were established by the duration of the periods of the reproduction cycle and the coefficient of reproductive ability.Results. As a result of the research, it was found that the use of mineral feed additives zeolite of the Karinsky deposit and “Mineral Active” in feeding heifers had a positive effect on milk productivity and reproductive qualities of first-calf cows. The highest milk yield for lactation was shown by the first heifers of the 3rd group, who received the “Mineral Active” mineral supplement for 15 days before calving. The fat content was higher in the milk of cows of the 2nd group, protein — in the milk of cows of the 3rd group. The primary heifer cows of the 3rd group had an advantage in the yield of milk fat and protein, which surpassed their peers in these indicators by 10.1 kg (2.9%, group 2) and 32.6 kg (9.3%, group 1) in milk fat and by 21.0 kg (6.9%) and 29.8 kg (9.8%) of milk protein, respectively. The animals receiving mineral feed additives in the diet were distinguished by a shorter service period, which turned out to be lower by 29.0% and 14.0%, respectively, compared with animals of the 1st group (control). Cows of all groups had an average fruiting period of 286 ± 2.9 — 289 ± 3.2 days.
- 21 November 2024
- Published by Agrarian Science in Agrarian science
- No. 11,p. 67-74
Open AccessProductive qualities of cows against the background of the use of mineral feed additives
Relevance. Holstein dairy cattle are bred in the Sverdlovsk region, its improvement is carried out by selecting and selecting the best for further breeding. In order for them to display their genetic potential of productivity, it is necessary to ensure a balanced diet. The purpose of the work is to evaluate the productive qualities of cows against the background of the use of mineral feed additives.Methods. To conduct the study in a typical breeding reproducer for the region, 3 groups of heifers in the last trimester of pregnancy (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The dairy productivity of cows for the first lactation was assessed by control milking once a month. The fat and protein content in milk was assessed in an average milk sample once a month from each cow. Reproduction indicators were established by the duration of the periods of the reproduction cycle and the coefficient of reproductive ability.Results. As a result of the research, it was found that the use of mineral feed additives zeolite of the Karinsky deposit and “Mineral Active” in feeding heifers had a positive effect on milk productivity and reproductive qualities of first-calf cows. The highest milk yield for lactation was shown by the first heifers of the 3rd group, who received the “Mineral Active” mineral supplement for 15 days before calving. The fat content was higher in the milk of cows of the 2nd group, protein — in the milk of cows of the 3rd group. The primary heifer cows of the 3rd group had an advantage in the yield of milk fat and protein, which surpassed their peers in these indicators by 10.1 kg (2.9%, group 2) and 32.6 kg (9.3%, group 1) in milk fat and by 21.0 kg (6.9%) and 29.8 kg (9.8%) of milk protein, respectively. The animals receiving mineral feed additives in the diet were distinguished by a shorter service period, which turned out to be lower by 29.0% and 14.0%, respectively, compared with animals of the 1st group (control). Cows of all groups had an average fruiting period of 286 ± 2.9 — 289 ± 3.2 days.
- Open Access
- 20 November 2024
- Published by Agrarian Science in Agrarian science
- No. 11,p. 55-61
Weight growth and safety of calves against the background of the use of mineral feed additives
Relevance. Insufficient feeding has a negative effect on the metabolism and health of the cow, as well as on the condition of the offspring being born. Weak calves that have not accumulated reserve nutrients by birth are susceptible to various diseases.The purpose of the work is to study the effect of the use of mineral feed additives when feeding heifers on the growth and development, safety of newborn young.Methods. To conduct the study in a typical breeding plant for the region, 3 groups of heifers (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The safety of calves and their weight growth were assessed by weighing individually and calculating growth indicators according to generally accepted methods and formulas. The impact of the use of mineral feed additives when feeding heifers during the deadwood period on the health of calves was evaluated.Results. It was found that the use of such mineral feed additives as zeolite from the Karinsky deposit and “Mineral Active” to heifers in the third trimester of pregnancy had a positive effect on the growth and safety of newborn calves. Calves of the experimental groups had a live birth weight significantly higher than calves obtained from heifers of the control group. To some extent, this had an impact on the live weight of calves at 3 months of age (p < 0.01). Despite the significant difference in live weight and average daily live weight gains in favor of calves of the experimental groups, the relative increase (or growth intensity) turned out to be higher in calves of the control group with almost unchanged growth multiplicity.
- 20 November 2024
- Published by Agrarian Science in Agrarian science
- No. 11,p. 55-61
Open AccessWeight growth and safety of calves against the background of the use of mineral feed additives
Relevance. Insufficient feeding has a negative effect on the metabolism and health of the cow, as well as on the condition of the offspring being born. Weak calves that have not accumulated reserve nutrients by birth are susceptible to various diseases.The purpose of the work is to study the effect of the use of mineral feed additives when feeding heifers on the growth and development, safety of newborn young.Methods. To conduct the study in a typical breeding plant for the region, 3 groups of heifers (10 heads each) were formed — a control group and two experimental ones based on the principle of pairs of analogues. The safety of calves and their weight growth were assessed by weighing individually and calculating growth indicators according to generally accepted methods and formulas. The impact of the use of mineral feed additives when feeding heifers during the deadwood period on the health of calves was evaluated.Results. It was found that the use of such mineral feed additives as zeolite from the Karinsky deposit and “Mineral Active” to heifers in the third trimester of pregnancy had a positive effect on the growth and safety of newborn calves. Calves of the experimental groups had a live birth weight significantly higher than calves obtained from heifers of the control group. To some extent, this had an impact on the live weight of calves at 3 months of age (p < 0.01). Despite the significant difference in live weight and average daily live weight gains in favor of calves of the experimental groups, the relative increase (or growth intensity) turned out to be higher in calves of the control group with almost unchanged growth multiplicity.
- Open Access
- 21 January 2023
- Published by Agrarian Science in Agrarian science
- No. 12,p. 149-153
Development of technology for the fermented milk products for baby food
Replenishment of macro- and micronutrients in case of their deficiency in the children is the leading task of modern dietetics and a fundamental factor in the children’s healthy development. The development of new types of food products can solve this task. This article presents the development of technology for production of fermented milk product for children nutrition. The option of introducing spirulina algae into a fermented milk product was experimentally investigated. On the basis of physical and chemical, rheological and organoleptic characteristics it was defined that the introduction of 2% of spirulina allows obtaining a product with acceptable physical, chemical and rheological characteristics. The organoleptic profile was corrected by adding fruit filler in volume of 20 % from the raw material mass. The conducted research made it possible to develop a fermented milk product for child nutrition, which can satisfy 10–16 % of the daily demand for nutritional elements, and which features high consumer-oriented characteristics.
- 21 January 2023
- Published by Agrarian Science in Agrarian science
- No. 12,p. 149-153
Open AccessDevelopment of technology for the fermented milk products for baby food
Replenishment of macro- and micronutrients in case of their deficiency in the children is the leading task of modern dietetics and a fundamental factor in the children’s healthy development. The development of new types of food products can solve this task. This article presents the development of technology for production of fermented milk product for children nutrition. The option of introducing spirulina algae into a fermented milk product was experimentally investigated. On the basis of physical and chemical, rheological and organoleptic characteristics it was defined that the introduction of 2% of spirulina allows obtaining a product with acceptable physical, chemical and rheological characteristics. The organoleptic profile was corrected by adding fruit filler in volume of 20 % from the raw material mass. The conducted research made it possible to develop a fermented milk product for child nutrition, which can satisfy 10–16 % of the daily demand for nutritional elements, and which features high consumer-oriented characteristics.
- Open Access
- 27 December 2022
- Published by The Gorbatov's All-Russian Meat Research Institute in Theory and practice of meat processing
- Vol. 7 (4) , 273-281
The ways to improve the biological and morphological parameters of young fattening pigs
Studies were carried out to find the new ways to improve the efficiency of iodine use for the young pigs. During the scientific and economic experiment it was found that bringing iodine to the physiological norm, in combination with introduction of 3% bentonite clay into the diets of young fattening pigs, provided a positive effect on the morphological composition of carcasses, slaughter parameters and meat quality of the pigs. So fattening the yelts with the diets with a physiological norm of iodine in combination with 3% bentonite clay allowed young pigs of the 3rdexperimental group to reach a slaughter weight of 78.95 kg at the age of 8 months, which is 10.1% more than in the control group, and 4.2% and 2.5% more in comparison with the 1st and 2nd experimental groups. The slaughter yield in yelts of the 3rdexperimental group increased by 2.43% (P2) area of the “rib eye” was recorded in the 3rdexperimental group, which is 5.60% more than the control one, while the carcasses of pigs of the 3rdexperimental group contained muscle tissue by 4.74% (Prdexperimental group by 1.22% compared to the control group (Prdexperimental group and amounted to 10.90 (Prdexperimental group — 49.59, which is 1.28% (P<0.05) higher than in the control group.
- 27 December 2022
- Published by The Gorbatov's All-Russian Meat Research Institute in Theory and practice of meat processing
- Vol. 7 (4) , 273-281
Open AccessThe ways to improve the biological and morphological parameters of young fattening pigs
Studies were carried out to find the new ways to improve the efficiency of iodine use for the young pigs. During the scientific and economic experiment it was found that bringing iodine to the physiological norm, in combination with introduction of 3% bentonite clay into the diets of young fattening pigs, provided a positive effect on the morphological composition of carcasses, slaughter parameters and meat quality of the pigs. So fattening the yelts with the diets with a physiological norm of iodine in combination with 3% bentonite clay allowed young pigs of the 3rdexperimental group to reach a slaughter weight of 78.95 kg at the age of 8 months, which is 10.1% more than in the control group, and 4.2% and 2.5% more in comparison with the 1st and 2nd experimental groups. The slaughter yield in yelts of the 3rdexperimental group increased by 2.43% (P2) area of the “rib eye” was recorded in the 3rdexperimental group, which is 5.60% more than the control one, while the carcasses of pigs of the 3rdexperimental group contained muscle tissue by 4.74% (Prdexperimental group by 1.22% compared to the control group (Prdexperimental group and amounted to 10.90 (Prdexperimental group — 49.59, which is 1.28% (P<0.05) higher than in the control group.
- Open Access
- 16 December 2022
- Published by Agrarian Science in Agrarian science
- No. 10,p. 149-153
Assessment of economic efficiency of putting the functional food products into production
Relevance. Economic efficiency is the most important fact when introduction the new types of products into production. The article represents an assessment of the economic efficiency in case of introducing of the functional food products into mass production. An assessment of the costs of launching products into production has been conducted; the selling price of a unit of production will be 67.70 rubles per one piece. It has been established that due to the introduction of new types of products into production, the proceeds will increase in 3 years by 623.88 thousand rubles, which is more than 8%. It has been calculated and proven that investments in this project will be quite profitable, as confirmed by the positive value of the net present value. The estimated payback period of the project will be 4 months. Investment in this project will help to increase the return on costs from 21.21% to 21.39% and the return on sales from 17.50% to 17.62%.Results. The results of analysis of the economic efficiency of implementation of project for the production of a functional bakery product, confirm that this project is cost-effective.
- 16 December 2022
- Published by Agrarian Science in Agrarian science
- No. 10,p. 149-153
Open AccessAssessment of economic efficiency of putting the functional food products into production
Relevance. Economic efficiency is the most important fact when introduction the new types of products into production. The article represents an assessment of the economic efficiency in case of introducing of the functional food products into mass production. An assessment of the costs of launching products into production has been conducted; the selling price of a unit of production will be 67.70 rubles per one piece. It has been established that due to the introduction of new types of products into production, the proceeds will increase in 3 years by 623.88 thousand rubles, which is more than 8%. It has been calculated and proven that investments in this project will be quite profitable, as confirmed by the positive value of the net present value. The estimated payback period of the project will be 4 months. Investment in this project will help to increase the return on costs from 21.21% to 21.39% and the return on sales from 17.50% to 17.62%.Results. The results of analysis of the economic efficiency of implementation of project for the production of a functional bakery product, confirm that this project is cost-effective.
- Open Access
- 23 December 2021
- Published by Innovative University of Eurasia in Bulletin of the Innovative University of Eurasia
- Vol. 84 (4) , 92-99
Development of a technology for producing organic fertilizers based on catalytic processes
The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.
- 23 December 2021
- Published by Innovative University of Eurasia in Bulletin of the Innovative University of Eurasia
- Vol. 84 (4) , 92-99
Open AccessDevelopment of a technology for producing organic fertilizers based on catalytic processes
The article is devoted to the development of a technology for obtaining organic fertilizers from poultry waste based on biocatalytic processes. Currently, many poultry farms have become sources of environmental pollution, thereby causing serious environmental problems and economic and social damage. The problem of reliable protection of the natural environment from pollution by bird droppings is currently relevant. In the area of operation of large poultry farms, air pollution by microorganisms, dust, foul-smelling organic compounds, which are decomposition products of organic waste, as well as nitrogen, sulfur, and carbon oxides, is possible. Bird droppings contain acids, nitrogen, phosphorus and potassium, heavy metals. The content of nitrogen, phosphorus and potassium changes dramatically depending on the quantity and quality of the feed. Humic substances isolated from brown coal have a sufficiently high sorption activity and are used as cheap sorbents for solving a number of environmental problems in industry. These studies are aimed at minimizing the main disadvantage of the anaerobic digestion process, the low reaction rate, which leads to the need to create large-volume bioreactors. On the basis of the research carried out, a technology has been developed for obtaining organic fertilizers from poultry waste by the method of anaerobic fermentation of chicken manure with humidity at a temperature of 27 °C - 50 °C with the addition of sodium humate. The resulting fertilizer is intended for use in agricultural production, horticulture, floriculture, forestry, municipalities, in household plots in order to increase the yield and quality of crop production. For the developed technology, an application has been submitted for obtaining a Patent for the invention of the Republic of Kazakhstan «Method for producing organic fertilizers» (priority No. 2021-22818, dated July 13, 2021). The invention allows to significantly reduce the time of fermentation, to enrich the product with organic and mineral products contained in sodium humate, to convert the salts of heavy metals into an insoluble state, to improve the environmental friendliness of the method.
- Open Access
- 10 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12430
Contribution of Electrolysis within an Integrated System for a Poultry Slaughterhouse Wastewater Treatment
Treatment of poultry slaughterhouse wastewater before disposal or reuse is an essential part of human health and environmental protection in general. This study aimed to investigate the influence of the pre-treatment system based on electrolysis technology within an integrated lab-scale treatment plant in the removal of contaminants from poultry slaughterhouse wastewater. Several treatment units (averaging tank, feather catcher, fat catcher, and coarse mechanical filter) were connected in series before the electrolysis chamber. While in general, the entire integrated system also included some other units such as ultra-filtration, reverse osmosis, and the ultraviolet lamp connected in series. From the analysis results, it was observed that the pre-treatment phase with electrolysis had a significant influence on the general performance of the treatment plant. The pre-treatment contributed to about 33.5% to 100% in the general contaminants’ removal efficiency. The highest contribution was observed from the total chlorine (100%), nitrate (98.2%), as well as BOD (95.3%). The lowest contribution was observed from the nitrite removal, with 33.5%. This study revealed further that the integration of electrolysis technology in a wastewater treatment system has a significant potential for developing an effective wastewater treatment plant.
- 10 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12430
Open AccessContribution of Electrolysis within an Integrated System for a Poultry Slaughterhouse Wastewater Treatment
Treatment of poultry slaughterhouse wastewater before disposal or reuse is an essential part of human health and environmental protection in general. This study aimed to investigate the influence of the pre-treatment system based on electrolysis technology within an integrated lab-scale treatment plant in the removal of contaminants from poultry slaughterhouse wastewater. Several treatment units (averaging tank, feather catcher, fat catcher, and coarse mechanical filter) were connected in series before the electrolysis chamber. While in general, the entire integrated system also included some other units such as ultra-filtration, reverse osmosis, and the ultraviolet lamp connected in series. From the analysis results, it was observed that the pre-treatment phase with electrolysis had a significant influence on the general performance of the treatment plant. The pre-treatment contributed to about 33.5% to 100% in the general contaminants’ removal efficiency. The highest contribution was observed from the total chlorine (100%), nitrate (98.2%), as well as BOD (95.3%). The lowest contribution was observed from the nitrite removal, with 33.5%. This study revealed further that the integration of electrolysis technology in a wastewater treatment system has a significant potential for developing an effective wastewater treatment plant.
- Open Access
- 1 March 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 677 (2) , 022104
Mathematical modeling of multicomponent beverages with a balanced composition of nutrients
The article assumes that formulas for multicomponent beverages based on dairy and vegetable raw materials were developed according to the principles of food combinatorics using methods of mathematical and computer modeling. The whey was used as a basis, plant materials were spinach and pumpkin, and chia seeds were used as a source of unsaturated fatty acids. Mathematical planning was used to form criterion equations for beverages characterizing the maximum content of essential nutrients. The formulas for beverages “Spinach” and “Pumpkin” were obtained; the content of the main nutrients is 18.889 g and 17.664 g, respectively. The analysis of the chemical composition showed that the ratio of proteins, fats and carbohydrates is 1: 1.45: 3.03 for “Pumpkin” and 1: 1.34: 2.57 for “Spinach”. The storage terms of the developed beverages were determined taking into account changes in organoleptic and microbiological indicators. The optimal storage terms based on organoleptic changes suggests that the developed beverages will be competitive. The study of changes in the microbiota of ready-made beverages during four hours at a temperature of 4 ± 20C in a sealed glass container showed that the beverages meet the current regulatory requirements for the presence of opportunistic microorganisms. The developed integrated approach to the production of multicomponent beverages can be used by any market operator in the production of not only beverages, but also various food products.
- 1 March 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 677 (2) , 022104
Open AccessMathematical modeling of multicomponent beverages with a balanced composition of nutrients
The article assumes that formulas for multicomponent beverages based on dairy and vegetable raw materials were developed according to the principles of food combinatorics using methods of mathematical and computer modeling. The whey was used as a basis, plant materials were spinach and pumpkin, and chia seeds were used as a source of unsaturated fatty acids. Mathematical planning was used to form criterion equations for beverages characterizing the maximum content of essential nutrients. The formulas for beverages “Spinach” and “Pumpkin” were obtained; the content of the main nutrients is 18.889 g and 17.664 g, respectively. The analysis of the chemical composition showed that the ratio of proteins, fats and carbohydrates is 1: 1.45: 3.03 for “Pumpkin” and 1: 1.34: 2.57 for “Spinach”. The storage terms of the developed beverages were determined taking into account changes in organoleptic and microbiological indicators. The optimal storage terms based on organoleptic changes suggests that the developed beverages will be competitive. The study of changes in the microbiota of ready-made beverages during four hours at a temperature of 4 ± 20C in a sealed glass container showed that the beverages meet the current regulatory requirements for the presence of opportunistic microorganisms. The developed integrated approach to the production of multicomponent beverages can be used by any market operator in the production of not only beverages, but also various food products.
- Open Access
Performance of Graphite and Titanium as Cathode Electrode Materials on Poultry Slaughterhouse Wastewater Treatment
Despite the potential applicability of the combination between aluminium (anode) and graphite or titanium (cathode) for poultry slaughterhouse wastewater treatment, their technical and economic feasibilities have not been comprehensively captured. In this study, aluminium (anode) and graphite and titanium as cathode electrode materials were investigated and compared in terms of their performance on poultry slaughterhouse wastewater treatment. The wastewater samples collected from the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan were treated using a lab-based electrochemical treatment plant and then analyzed after every 20 and 40 min of the treatment processes. Cost analysis for both electrode combinations was also performed. From the analysis results, the aluminium–graphite electrode combination achieved high removal efficiency from turbidity, color, nitrite, phosphates, and chemical oxygen demand, with removal efficiency ranging from 72% to 98% after 20 min, as well as 88% to 100% after 40 min. A similar phenomenon was also observed from the aluminium–titanium electrode combination, with high removal efficiency achieved from turbidity, color, total suspended solids, nitrite, phosphates, and chemical oxygen demand, ranging from 81% to 100% after 20 min as well as from 91% to 100% after 40 min. This means the treatment performances for both aluminium–graphite and aluminium–titanium electrode combinations were highly affected by the contact time. The general performance in terms of removal efficiency indicates that the aluminium–titanium electrode combination outperformed the aluminium–graphite electrode combination. However, the inert character of the graphite electrode led to a positive impact on the total operating cost. Therefore, the aluminium–graphite electrode combination was observed to be cheaper than the aluminium–titanium electrode combination in terms of the operating cost.
Open AccessPerformance of Graphite and Titanium as Cathode Electrode Materials on Poultry Slaughterhouse Wastewater Treatment
Despite the potential applicability of the combination between aluminium (anode) and graphite or titanium (cathode) for poultry slaughterhouse wastewater treatment, their technical and economic feasibilities have not been comprehensively captured. In this study, aluminium (anode) and graphite and titanium as cathode electrode materials were investigated and compared in terms of their performance on poultry slaughterhouse wastewater treatment. The wastewater samples collected from the Izhevsk Production Corporative (PC) poultry farm in Kazakhstan were treated using a lab-based electrochemical treatment plant and then analyzed after every 20 and 40 min of the treatment processes. Cost analysis for both electrode combinations was also performed. From the analysis results, the aluminium–graphite electrode combination achieved high removal efficiency from turbidity, color, nitrite, phosphates, and chemical oxygen demand, with removal efficiency ranging from 72% to 98% after 20 min, as well as 88% to 100% after 40 min. A similar phenomenon was also observed from the aluminium–titanium electrode combination, with high removal efficiency achieved from turbidity, color, total suspended solids, nitrite, phosphates, and chemical oxygen demand, ranging from 81% to 100% after 20 min as well as from 91% to 100% after 40 min. This means the treatment performances for both aluminium–graphite and aluminium–titanium electrode combinations were highly affected by the contact time. The general performance in terms of removal efficiency indicates that the aluminium–titanium electrode combination outperformed the aluminium–graphite electrode combination. However, the inert character of the graphite electrode led to a positive impact on the total operating cost. Therefore, the aluminium–graphite electrode combination was observed to be cheaper than the aluminium–titanium electrode combination in terms of the operating cost.