JHJuyoung Ham

Juyoung Ham

*This is an algorithmically generated author record based on publicly available information.

Juyoung Ham has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A strain induced subwavelength-structure for a haze-free and highly transparent flexible plastic substrate

    by Jae Yong Park, Juyoung Ham, Illhwan Lee, Jong-Lam Lee

    This paper presents a method to produce subwavelength-scale (2 plasma treatment on an Ag-coated plastic film, AgCl nanostructures were produced through the reaction of Ag atoms with Cl radicals. During the reaction, the volume of AgCl expands, leading to drastically changed surface morphology from a two-dimensional (2D) flat Ag surface to a 3D subwavelength-scale AgCl nanostructure. The optical properties of AgCl on the plastic film were remarkably enhanced from 89.6% to 93.4% and the average transmittance ranged between 400 and 800 nm, while the average haze was retained below 0.3%. Consequently, OLEDs based on the subwavelength-scale AgCl nanostructure had an enhanced luminance efficiency (88.6 cd A−1 at 1000 cd m−2) of up to 10.7% without modifying the angular emission pattern, superior to that of the as-received PI film (efficiency of 80.0 cd A−1). The nanostructure enhances the transmission of electromagnetic (EM) waves as well as prohibits the scattering of EM waves, which was confirmed by finite-difference time-domain simulation and rigorous coupled wave analysis.


  • Open Access

    Extremely flat metal films implemented by surface roughness transfer for flexible electronics

    by Kisoo Kim, Sungjoo Kim, Gwan Ho Jung, Ilhwan Lee, Sungjun Kim, Juyoung Ham, Wan Jae Dong, Kihyon Hong, Jong-Lam Lee

    We present an innovative approach to fabricate an extremely flat (EF) metal film which was done by depositing metal on an extremely flat mother substrate, then detaching the metal from the substrate. The detached flexible metal films had a roughness that was within 2% of the roughness of the mother substrate, so EFs with Ra < 1 nm could be fabricated using the surface roughness transfer method. With quantitative analysis using in situ synchrotron XPS, it was concluded that the chemical reaction of oxygen atoms with the metal film played a critical role in designing a peel-off system to get extremely flat metal films from the mother substrate. The OLED was successfully implemented on the metal film. The OLED's luminance could be increased from 15 142 to 17 100 cd m−2 at 25 mA m−2 by replacing the glass substrate with an EF copper (Cu) substrate, due to the enhanced heat dissipation during the operation. This novel method can be very useful for mass production of large scale, low-cost and high quality metal films using roll-to-roll process.