Ki-Hoon Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ki-Hoon Kim has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Dong-Kyun Woo
Department of Electrical Engineering, Yeungnam University, Gyeongsan 38541, Korea
6 shared publications Hyun-Kyu Cho
Prestoliteasia, Icheon-si, South Korea
1 shared publication- Kyeong-Eun Kim
Yeungnam University
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 153111-153127
Quasi-3-D Analysis of Radially Weighted Permanent Magnet Skew in Axial Flux Permanent Magnet Machines
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 153111-153127
Open AccessQuasi-3-D Analysis of Radially Weighted Permanent Magnet Skew in Axial Flux Permanent Magnet Machines
- Open Access
Fast Design Optimization and Comparative Analysis for Linear Permanent Magnet Motor with Magnet Skew, Auxiliary Tooth and Overhang Structure
This paper presents a fast design optimization using an effective characteristic analysis for linear permanent magnet motors (LPMMs) with techniques for improving motor performance such as using an auxiliary tooth, permanent magnet (PM) skew, and overhang structures. These techniques have different effects on the characteristics of the LPMM depending on the combinations of each other, resulting in complexity in the design optimization process. In particular, the three-dimensional (3-D) effect of the PM skew and overhang structure takes a lot of time to be analyzed. To deal with this problem, an effective magnetic field analysis method and a novel optimization algorithm are proposed. Preferentially, the field reconstruction method is used for a fast and accurate evaluation of the magnetic field of the LPMM. In the proposed magnetic field analysis method, the change of magnetic field distribution due to the addition of an auxiliary tooth is predicted, and the 3-D magnetic field effect of PM skew and overhang structure is considered. By reducing the computational burden in the magnetic field analysis, the electromagnetic characteristics of LPMMs can be calculated quickly, such as detent force, end force, thrust force, and back-EMF. The effect of the auxiliary tooth and overhang structure on the optimal PM skew length is investigated with comparative study results. Subsequently, the proposed optimization algorithm has the advantage of reducing time cost by providing multimodal optimization and robustness evaluation of local peaks at the same time. The proposed method is verified via comparison with finite element analysis and experimental results.
Open AccessFast Design Optimization and Comparative Analysis for Linear Permanent Magnet Motor with Magnet Skew, Auxiliary Tooth and Overhang Structure
This paper presents a fast design optimization using an effective characteristic analysis for linear permanent magnet motors (LPMMs) with techniques for improving motor performance such as using an auxiliary tooth, permanent magnet (PM) skew, and overhang structures. These techniques have different effects on the characteristics of the LPMM depending on the combinations of each other, resulting in complexity in the design optimization process. In particular, the three-dimensional (3-D) effect of the PM skew and overhang structure takes a lot of time to be analyzed. To deal with this problem, an effective magnetic field analysis method and a novel optimization algorithm are proposed. Preferentially, the field reconstruction method is used for a fast and accurate evaluation of the magnetic field of the LPMM. In the proposed magnetic field analysis method, the change of magnetic field distribution due to the addition of an auxiliary tooth is predicted, and the 3-D magnetic field effect of PM skew and overhang structure is considered. By reducing the computational burden in the magnetic field analysis, the electromagnetic characteristics of LPMMs can be calculated quickly, such as detent force, end force, thrust force, and back-EMF. The effect of the auxiliary tooth and overhang structure on the optimal PM skew length is investigated with comparative study results. Subsequently, the proposed optimization algorithm has the advantage of reducing time cost by providing multimodal optimization and robustness evaluation of local peaks at the same time. The proposed method is verified via comparison with finite element analysis and experimental results.
- Open Access
- 15 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 98842-98854
Novel Quasi-Three-Dimensional Modeling of Axial Flux In-Wheel Motor With Permanent Magnet Skew
This paper presents a characteristic analysis of axial flux permanent magnet machines (AFPMMs) for in-wheel electric vehicles. Preferentially, a novel quasi-3-D model is developed for the fast and accurate design of AFPMMs. In electromagnetic field analysis, combined with field reconstruction method, the computation time of 2-D solutions is significantly reduced. With the use of time sweeping of the basis function, only the static finite element (FE) analysis is performed to calculate the air-gap flux distribution at the entire rotor position, whereas the conventional 2-D solutions require a transient FE analysis. In the shape sweeping process of the basis function, the virtual air-gap section method is introduced to take into account that the ratio of slot opening to slot pitch is different depending on the radius of analysis plane, which causes errors in the analysis results of the conventional quasi-3-D method. The virtual air-gap sections are obtained by interpolation of the spatial field between the mapped cylindrical planes. The proposed technique reduces the number of 2-D analysis planes required for high accuracy in the conventional quasi-3-D method, and it can also predict the air-gap magnetic flux distribution for skewed permanent magnets without additional FE analysis. Finally, using the magnetic fields calculated in the proposed method, the electromagnetic performances of the AFPMM are calculated, such as load torque, cogging torque, attraction force, and back-EMF. The analysis results were verified by comparison with the measurement results.
- 15 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 98842-98854
Open AccessNovel Quasi-Three-Dimensional Modeling of Axial Flux In-Wheel Motor With Permanent Magnet Skew
This paper presents a characteristic analysis of axial flux permanent magnet machines (AFPMMs) for in-wheel electric vehicles. Preferentially, a novel quasi-3-D model is developed for the fast and accurate design of AFPMMs. In electromagnetic field analysis, combined with field reconstruction method, the computation time of 2-D solutions is significantly reduced. With the use of time sweeping of the basis function, only the static finite element (FE) analysis is performed to calculate the air-gap flux distribution at the entire rotor position, whereas the conventional 2-D solutions require a transient FE analysis. In the shape sweeping process of the basis function, the virtual air-gap section method is introduced to take into account that the ratio of slot opening to slot pitch is different depending on the radius of analysis plane, which causes errors in the analysis results of the conventional quasi-3-D method. The virtual air-gap sections are obtained by interpolation of the spatial field between the mapped cylindrical planes. The proposed technique reduces the number of 2-D analysis planes required for high accuracy in the conventional quasi-3-D method, and it can also predict the air-gap magnetic flux distribution for skewed permanent magnets without additional FE analysis. Finally, using the magnetic fields calculated in the proposed method, the electromagnetic performances of the AFPMM are calculated, such as load torque, cogging torque, attraction force, and back-EMF. The analysis results were verified by comparison with the measurement results.
- Open Access
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 153863-153874
3D Characteristic Analysis of 3-Leg Linear Permanent Magnet Motor With Magnet Skew and Overhang Structure
This paper presents the 3-leg linear permanent magnet motor (TLPMM), which has a novel structure. It has an advantage of reducing the entire volume due to the attraction force cancellation. The TLPMM consists of stator and mover modules, simplifying the manufacturing process and maintenance. The TLPMM has a permanent magnet skew and overhang structure to improve motor performance. Therefore, the consideration of three dimension (3D) effects is required in the characteristic analysis. The proposed method is based on a field reconstruction method that provides a reduction in computational burden with high accuracy in analyzing 3D characteristics. For the evaluation of magnetic fields in non-uniform and complex air-gap in the TLPMM, the virtual air-gap section method is introduced. Using these proposed methods, the TLPMM with the magnet skew and overhang structure are effectively analyzed. This approach was verified by comparison with finite element analysis and experimental results.
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 153863-153874
Open Access3D Characteristic Analysis of 3-Leg Linear Permanent Magnet Motor With Magnet Skew and Overhang Structure
This paper presents the 3-leg linear permanent magnet motor (TLPMM), which has a novel structure. It has an advantage of reducing the entire volume due to the attraction force cancellation. The TLPMM consists of stator and mover modules, simplifying the manufacturing process and maintenance. The TLPMM has a permanent magnet skew and overhang structure to improve motor performance. Therefore, the consideration of three dimension (3D) effects is required in the characteristic analysis. The proposed method is based on a field reconstruction method that provides a reduction in computational burden with high accuracy in analyzing 3D characteristics. For the evaluation of magnetic fields in non-uniform and complex air-gap in the TLPMM, the virtual air-gap section method is introduced. Using these proposed methods, the TLPMM with the magnet skew and overhang structure are effectively analyzed. This approach was verified by comparison with finite element analysis and experimental results.
- Open Access
- 2 September 2021
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 15 (12) , 1648-1665
Linear tubular permanent magnet motor for an electromagnetic active suspension system
This work presents the comparative study of the linear tubular permanent magnet motor (LTPMM) for the active suspension system in vehicles. To analyse and design the LTPMM, a finite element‐based optimisation process is proposed. Since the proposed method reconstructs the entire field by storing the information of the air‐gap magnetic flux distribution in the form of a snapshot, it provides high accuracy and a reduced computation time. The magnetic fields are analysed in LTPMMs with external and internal permanent magnets that are classified according to the position of the permanent magnet. In the comparative analysis, an optimal model for the LTPMM is presented, taking into account characteristics such as thrust, detent force and THD. Especially, various magnetisation patterns are considered to accomplish high force density. The analytical model is verified by performing finite element analysis and experiments.
- 2 September 2021
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 15 (12) , 1648-1665
Open AccessLinear tubular permanent magnet motor for an electromagnetic active suspension system
This work presents the comparative study of the linear tubular permanent magnet motor (LTPMM) for the active suspension system in vehicles. To analyse and design the LTPMM, a finite element‐based optimisation process is proposed. Since the proposed method reconstructs the entire field by storing the information of the air‐gap magnetic flux distribution in the form of a snapshot, it provides high accuracy and a reduced computation time. The magnetic fields are analysed in LTPMMs with external and internal permanent magnets that are classified according to the position of the permanent magnet. In the comparative analysis, an optimal model for the LTPMM is presented, taking into account characteristics such as thrust, detent force and THD. Especially, various magnetisation patterns are considered to accomplish high force density. The analytical model is verified by performing finite element analysis and experiments.
- Open Access
- 14 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 169516-169524
Field Reconstruction Method for Linear Tubular Permanent Magnet Motor
This paper considers a linear tubular permanent magnet motor (LTPMM) for an active suspension system. The LTPMM has an end effect due to its structure. This can be an important factor for analysis and design of the LTPMM because it distorts the air-gap magnetic flux distribution. The field reconstruction method (FRM) was developed for an effective evaluation of the magnetic field in the electric machine. It can reduce the computation time using the basis-function which reconstructs the air-gap magnetic flux distribution with a static finite element analysis. In this paper, we adopted the FRM to evaluate the LTPMM. However, the FRM has been applied only to the rotating machines and does not take into account the distortion of the magnetic flux distribution in the LTPMM. To deal with this problem, we proposed an enhanced FRM with new basis-function. The proposed method is verified by comparing between experiment result, conventional and enhanced FRM.
- 14 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 169516-169524
Open AccessField Reconstruction Method for Linear Tubular Permanent Magnet Motor
This paper considers a linear tubular permanent magnet motor (LTPMM) for an active suspension system. The LTPMM has an end effect due to its structure. This can be an important factor for analysis and design of the LTPMM because it distorts the air-gap magnetic flux distribution. The field reconstruction method (FRM) was developed for an effective evaluation of the magnetic field in the electric machine. It can reduce the computation time using the basis-function which reconstructs the air-gap magnetic flux distribution with a static finite element analysis. In this paper, we adopted the FRM to evaluate the LTPMM. However, the FRM has been applied only to the rotating machines and does not take into account the distortion of the magnetic flux distribution in the LTPMM. To deal with this problem, we proposed an enhanced FRM with new basis-function. The proposed method is verified by comparing between experiment result, conventional and enhanced FRM.