HCHakan Osman Caldag

Hakan Osman Caldag

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hakan Osman Caldag has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fine-tuning the dispersion of active suspensions with oscillatory flows

    by Hakan Osman Caldag, Martin Alan Bees

    The combined effect of axial stretching and cross-stream diffusion on the downstream transport of solute is termed Taylor dispersion. The dispersion of active suspensions is qualitatively distinct: viscous and external torques can establish non-uniform concentration fields with weighted access to shear, modifying mean drift and effective diffusivity. It would be advantageous to fine-tune the dispersion for systems such as bioreactors, where mixing or particle separation can improve efficacy. Here, we investigate the dispersion of active suspensions in a vertical channel driven by an oscillatory pressure gradient—Womersley flow—using gyrotactic swimmers (bottom-heavy cells subject to viscous torques). Preliminary experimental results reveal interesting dispersion phenomena that are highly dependent on the oscillation parameters, motivating theoretical investigation. Employing Lagrangian simulations, we find that oscillatory flows can induce drift and increase lateral and downstream dispersion, with periodic mixing between left and right sides. Such flows can also be used to separate species with different motile behaviour. Eulerian numerical schemes typically require an approach to averaging in orientational space, such as generalized Taylor dispersion (GTD), with assumptions on translational and rotational time scales. For an oscillatory time scale commensurate with cell dynamics, we reveal the limitations of such approximations, beyond which the averaging techniques collapse. This article is part of the theme issue ‘Biological fluid dynamics: emerging directions’.


  • Open Access

    Foundation and challenges in modelling dilute active suspensions

    by Lloyd Fung, Hakan Osman Caldag, Martin Bees

    Active suspensions, which consist of suspended self-propelling particles such as swimming microorganisms, often exhibit non-trivial transport properties. Continuum models are frequently employed to elucidate phenomena in active suspensions, such as shear trapping of bacteria, bacterial turbulence and bioconvection patterns in suspensions of algae. Yet, these models are often empirically derived and may not always agree with the individual-based description of active particles. Here we review the essential coarse-graining steps to develop commonly used continuum models from their respective microscopic dynamics. All the assumptions needed to reach popular continuum models from a multi-particle Fokker–Planck equation, which governs the probability of the full configuration space, are explicitly presented. In the dilute limit, this approach leads to the mean-field model (a.k.a. Doi–Saintillan–Shelley model), which can be further reduced to a continuum equation for particle density. Moreover, we review the limitations and highlight the challenges related to continuum descriptions, including significant issues in implementing physical boundary conditions and the possible emergence of singular solutions. This article is part of the theme issue ‘Biological fluid dynamics: emerging directions’.


  • Open Access

    Fine-tuning the dispersion of active suspensions with oscillatory flows

    by Hakan Osman Caldag, Martin Alan Bees

    The combined impact of axial stretching and cross-stream diffusion on the downstream transport of solute is termed Taylor dispersion. The dispersion of active suspensions is qualitatively distinct: viscous and external torques can establish non-uniform concentration fields with weighted access to shear, modifying mean drift and effective diffusivity. It would be advantageous to fine-tune the dispersion for systems such as bioreactors, where mixing or particle separation can improve efficacy. Here, we investigate the dispersion of active suspensions in a vertical channel driven by an oscillatory pressure gradient - Womersley flow - using gyrotactic swimmers (bottom-heavy cells subject to viscous torques). Preliminary experimental results reveal interesting dispersion phenomena, highly dependent on the oscillation parameters, motivating theoretical investigation. Employing Lagrangian simulations, we find that oscillatory flows can induce drift and increase lateral and downstream dispersion, with periodic mixing between left and right sides. Such flows can also be used to separate species with different motile behaviour. Eulerian numerical schemes typically require an approach to averaging in orientational space, such as generalised Taylor dispersion, with assumptions on translational and rotational time scales. For an oscillatory timescale commensurate with cell dynamics, we reveal the limitations of such approximations, beyond which the averaging techniques collapse.

  • Open Access

    Fabrication of magnetic helical microribbons made of nickel thin films sandwiched between silicon nitride layers for microswimming applications

    by Milad Shojaeian, Hakan Osman Caldag, Ayhan Bozkurt, Serhat Yesilyurt

    Helical swimming is adopted by microswimming robots since it is an efficient mechanism and commonly observed among microorganisms swimming at low Reynolds numbers. However, manufacturing of micro-helices made of sub-micron magnetic thin layers is neither straightforward nor well-established, advanced materials and methods are necessary to obtain such structures as reported in the literature. In this paper, a topological patterning method utilizing basic microfabrication methods is presented for the self-assembly of magnetic micro-helices made of a sandwiched nickel thin film (50–150 nm) between two silicon nitride layers. Strain mismatch between the thin films and the geometric anisotropy introduced by the slanted patterns on the top nitride layer result in self-rolled-up helical microribbons. Moreover, inspired by the actual release process during the wet-etching of the microribbon from the substrate, moving boundary conditions are incorporated in a numerical model to simulate the self-rolling of trilayer ribbons. The simulation results are compared and validated by experimental data within 7% error for all cases, including the geometries that do not result in a helical shape. The swimming performance of the magnetized micro-helix is demonstrated inside a capillary glass tube experimentally and cross-validated with a numerical model.


  • Open Access

    A numerical and experimental investigation of rolling and sliding motion of rotating spheres inside a cylinder

    by Hakan O. Caldag, Ebru Demir, Serhat Yesilyurt

    Rotating spheres in cylindrical channels roll or slide along the channel depending on the physical and geometric conditions. For a thorough investigation of the phenomenon, finite-element modelling is utilized to obtain the resistance coefficients for the motion of a sphere in a cylindrical channel, with an emphasis on near-wall motion. Extracted coefficients are compared with the data in the literature and utilized in exploring the conditions for rolling versus sliding along the channel. Sliding occurs due to the pressure build-up in the nip region between the wall and the rotating sphere in small confinement ratios, whereas rolling occurs when the shearing forces on the sphere are dominant in larger ratios. According to numerical results, a flow reversal takes place in the nip region and reduces the shear as well. Rolling versus sliding is demonstrated in experiments by using magnetic spherical particles, which are rotated by means of an external magnetic field inside cylindrical channels filled with viscous fluids. Faster axial velocities are observed in narrow channels while sliding than in wider channels while rolling for the same rotation rate of the sphere. Experiment observations are compared with the velocities evaluated from the resistance coefficients, showing that the distance between the sphere and the wall, which is dominated by roughness, plays an important role in the velocity of the sphere.


  • Open Access

    Acoustic Radiation Forces on Elastic Micro Rings in Standing Waves

    by Fatemeh Malekabadi, Hakan Osman Caldag, Serhat Yesilyurt

    Acoustic radiation forces are very effective in controlling micron-sized objects such as cells, droplets, particles, and organisms. In this work, we present analysis of acoustic radiation forces and torques on ring-shaped slender microstructures under a standing wave in an inviscid fluid using on a three-dimensional finite-element-method (FEM) model. The influence of geometric and physical parameters on the radiation forces and torques is characterized. The radiation force tends to push the rings towards the pressure nodes or anti-nodes depending on the contrast factor and exhibits a volumetric dependence in magnitude on geometric parameters. Moreover, a nonzero net torque develops when the ring is not co-planar with plane waves and varies in magnitude and direction depending on the position, orientation, and material properties of the ring. Large variations are observed only in torque values for specific combinations of geometric and physical parameters as an indicative of resonance. Furthermore, the FEM results are compared with a reduced-order model called chain-of-spheres, which works well in estimating the radiation forces at a fraction of the computational cost but deviates significantly in torque evaluations. Lastly, a segmented ring is used to understand the relative effect of secondary forces due to self-scattering. The findings of the study are applicable to development of acoustic manipulation systems for ring-like elastic microfilaments.

  • A Simple Numerical Tool for the Evaluation of Acoustic Radiation Force on Helices

    by Hakan Osman Caldag, Serhat Yesilyurt

    Helical microswimmers are prospective agents in biomedical applications such as targeted drug delivery. Most of the helical swimmers are actuated with external magnetic field due to its biocompatible nature. Acoustic actuation is another biocompatible mode of actuation that may be used alongside the magnetic fields to improve the propulsion and control of the swimmers. In order to design helical swimmers suited for acoustic actuation, it is vital to develop appropriate modelling tools to understand the effects of acoustic radiation forces on helical structures. Such complex structures do not have any analytical formulae available for use and finite-element based methods are computationally expensive. A simple numerical tool is presented here that approximates the helix as a chain of small spheres. The sum of the forces acting on the spheres is found to be close to the radiation force evaluated from the finite-element simulation for the helix. The sensitivity of the approach with respect to physical and geometric parameters such as material properties, swimmer geometry and number of spheres used for the approximation are demonstrated.

  • Acoustic radiation forces on magnetically actuated helical swimmers

    by Hakan O. Caldag, Serhat Yesilyurt

    Artificial microswimmers have gained significant attention recently for use in biomedical applications, such as drug delivery, and microfluidic applications, such as mixing. The small scale of the swimmers requires external actuation mechanisms, such as magnetic fields. Acoustic actuation, due to its biocompatible nature, can be used alongside magnetic fields to improve swimming performance. Several experimental studies have already shown the propulsion of both non-helical and helical swimmers with acoustic fields. Here, we present a simple model to evaluate the acoustic radiation force on helices. The methodology can be applied to solve for the force on other complicated structures as well, reducing the high computational cost required with other methods, such as the finite-element method. The approach is coupled with a resistive force theory-based model of slender magnetized helices to evaluate the complete three-dimensional trajectories of the swimmers under acoustic and magnetic fields. Traveling waves are shown to reduce swimmer wobbling significantly while also generating a significant push. Standing waves, on the other hand, are observed to place the swimmer in a unique position and orientation, which can be exploited for accurate positioning or micro-mixing.


  • Steering Control of Magnetic Helical Swimmers in Swirling Flows due to Confinement

    by Hakan O. Caldag, Serhat Yesilyurt

    Artificial microswimmers are prospective robotic agents especially in biomedical applications. A rotating magnetic field can actuate a magnetized swimmer with a helical tail and enable propulsion. Such swimmers exhibit several modes of instability. Inside conduits, for example, hydrodynamic interactions with the boundaries lead to helical paths for pusher-mode swimmers; in this mode the helical tail pushes a rotating magnetic head. State-of-the-art in controlled navigation of micro-swimmers is based on aligning the swimmer orientation according to a reference path, thereby requiring both swimmer orientation and position to be known. Object-orientation is hard to track especially in in vivo scenarios which render orientation-based methods practically unfeasible. Here, we show that the kinematics for a confined swimmer can be linearized by assuming a low wobbling angle. This allows for a control law solely based on the swimmer position. The approach is demonstrated through experiments and two different numerical models: the first is based on the resistive force theory for a swimmer inside a swirling flow represented by a forced vortex and the second is a computational fluid dynamics model, which solves Stokes equations for a swimmer inside a circular channel. Helical pusher-mode trajectories are suppressed significantly for the straight path following problem. The error in real-life experiments remains comparable to those in the state-of-the-art methods.