Vladimir V. Pokropivny
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Vladimir V. Pokropivny has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
A. V. Pokropivny
National Academy of Sciences of Ukraine
2 shared publicationsA. S. Smolyar
National Academy of Sciences of Ukraine
1 shared publicationA.V. Pokropivny
Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 252142, Kiev, Ukraine
1 shared publicationG. S. Oleinik
Ukrainian National Academy of Sciences
1 shared publicationM. M. Kasumov
National Academy of Sciences of Ukraine
1 shared publicationP. M. Silenko
I. N. Frantsevich Institute of Problems in Materials Science, National Academy of Sciences of Ukraine, Kyiv, Ukraine
1 shared publication
Latest Publications
- 1 March 2007
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 49 (3) , 591-598
Fluid synthesis and structure of a new boron nitride polymorph—hyperdiamond fulborenite B12N12 (E phase)
A new boron nitride polymorph is prepared for the first time by supercritical fluid synthesis in a high-pressure gazostat at a pressure P < 200 MPa and a temperature T < 1000°C in various atmospheres. The formation of the new phase is confirmed by x-ray diffraction and infrared absorption spectroscopy. A number of lines in the x-ray diffraction patterns and infrared absorption spectra of the new phase coincide with those described in the literature for the so-called E phase. On this basis, the conclusion is drawn that the E phase of boron nitride is most likely formed during supercritical fluid synthesis. Since the structure of the E phase is as yet unknown, a model structure of the new phase is proposed in the form of a diamond-like lattice with the sites occupied by molecules of the fulborene B12N12. The proposed structure is confirmed by the good agreement between the calculated and experimental values of the lattice parameters (A = 1.152 and 1.114 nm, respectively), densities (ρ = 2.59 and 2.50–2.60 g/cm3, respectively), and x-ray diffraction patterns. This new boron nitride zeolite with a faujasite lattice is given the name hyperdiamond fulborenite B12N12. The calculated bulk modulus of the hyperdiamond fulborenite B = 658 GPa is higher than that of diamond.
- 1 March 2007
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 49 (3) , 591-598
Fluid synthesis and structure of a new boron nitride polymorph—hyperdiamond fulborenite B12N12 (E phase)
A new boron nitride polymorph is prepared for the first time by supercritical fluid synthesis in a high-pressure gazostat at a pressure P < 200 MPa and a temperature T < 1000°C in various atmospheres. The formation of the new phase is confirmed by x-ray diffraction and infrared absorption spectroscopy. A number of lines in the x-ray diffraction patterns and infrared absorption spectra of the new phase coincide with those described in the literature for the so-called E phase. On this basis, the conclusion is drawn that the E phase of boron nitride is most likely formed during supercritical fluid synthesis. Since the structure of the E phase is as yet unknown, a model structure of the new phase is proposed in the form of a diamond-like lattice with the sites occupied by molecules of the fulborene B12N12. The proposed structure is confirmed by the good agreement between the calculated and experimental values of the lattice parameters (A = 1.152 and 1.114 nm, respectively), densities (ρ = 2.59 and 2.50–2.60 g/cm3, respectively), and x-ray diffraction patterns. This new boron nitride zeolite with a faujasite lattice is given the name hyperdiamond fulborenite B12N12. The calculated bulk modulus of the hyperdiamond fulborenite B = 658 GPa is higher than that of diamond.
- 1 January 2007
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 33 (1) , 44-47
Synthesis and growth mechanism of zinc oxide nanostructures in arc discharge
Nanodimensional tubes, needles, and tetrapods of zinc oxide (ZnO) with lengths up to ∼1 μm and diameters up to several hundred nanometers have been synthesized for the first time using an arc discharge method. A distinctive feature of the proposed method is the broad variety of evaporated and deposited products. The possible mechanism of evaporation, nucleation, and growth is suggested. Initially, the primary sheets are growing; these sheets turn into rolls and tubes, which eventually transform into needles. Tetrapods crystallize and grow in the gas phase and form a white snowlike deposit.
- 1 January 2007
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 33 (1) , 44-47
Synthesis and growth mechanism of zinc oxide nanostructures in arc discharge
Nanodimensional tubes, needles, and tetrapods of zinc oxide (ZnO) with lengths up to ∼1 μm and diameters up to several hundred nanometers have been synthesized for the first time using an arc discharge method. A distinctive feature of the proposed method is the broad variety of evaporated and deposited products. The possible mechanism of evaporation, nucleation, and growth is suggested. Initially, the primary sheets are growing; these sheets turn into rolls and tubes, which eventually transform into needles. Tetrapods crystallize and grow in the gas phase and form a white snowlike deposit.
- 1 July 2006
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 48 (7) , 1405-1410
Electronic structure and elastic moduli of the simple cubic fullerite C24—A new allotropic carbon modification
The energy band structure, equation of state, density of states, and elastic moduli of a new allotropic carbon modification, namely, fullerite C24 with a simple cubic lattice (known previously as cubic graphite), are calculated by the full-potential linearized augmented-plane-wave (FLAPW) method with geometry optimization for the first time. The dependence of the total energy on the lattice constant exhibits a minimum for a 0 = 0.60546 nm. In this case, the lengths of the C-C bonds between fullerene molecules, the lengths of the 6,6-bonds shared by hexagons, and the lengths of the 4,6-bonds shared by a square and a hexagon are equal to 0.1614, 0.1503, and 0.1637 nm, respectively. An analysis of the energy band structure and the density of states demonstrates that the simple cubic fullerite C24 is a direct-band-gap insulator or a semiconductor with a band gap of 1.6 eV. The calculated bulk modulus B 0 = 196 GPa and the elastic moduli C 11 = 338 GPa, C 12 = 139 GPa, and C 44 = 30 GPa indicate that the fullerite under investigation is a mechanically stable material. The inference is made that the simple cubic fullerite C24 is a new diamond-like molecular zeolite with a unique combination of properties, such as the porosity and nonpolarizability, on the one hand, and the mechanical strength, chemical inertness, and high thermal conductivity, on the other hand. The simple cubic fullerite C24 can be considered a promising low-dielectric-constant (low-k) material (ɛ0 < 5.7) for use in fabricating interconnections and substrates intended for integrated circuits and nanoelectronics.
- 1 July 2006
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 48 (7) , 1405-1410
Electronic structure and elastic moduli of the simple cubic fullerite C24—A new allotropic carbon modification
The energy band structure, equation of state, density of states, and elastic moduli of a new allotropic carbon modification, namely, fullerite C24 with a simple cubic lattice (known previously as cubic graphite), are calculated by the full-potential linearized augmented-plane-wave (FLAPW) method with geometry optimization for the first time. The dependence of the total energy on the lattice constant exhibits a minimum for a 0 = 0.60546 nm. In this case, the lengths of the C-C bonds between fullerene molecules, the lengths of the 6,6-bonds shared by hexagons, and the lengths of the 4,6-bonds shared by a square and a hexagon are equal to 0.1614, 0.1503, and 0.1637 nm, respectively. An analysis of the energy band structure and the density of states demonstrates that the simple cubic fullerite C24 is a direct-band-gap insulator or a semiconductor with a band gap of 1.6 eV. The calculated bulk modulus B 0 = 196 GPa and the elastic moduli C 11 = 338 GPa, C 12 = 139 GPa, and C 44 = 30 GPa indicate that the fullerite under investigation is a mechanically stable material. The inference is made that the simple cubic fullerite C24 is a new diamond-like molecular zeolite with a unique combination of properties, such as the porosity and nonpolarizability, on the one hand, and the mechanical strength, chemical inertness, and high thermal conductivity, on the other hand. The simple cubic fullerite C24 can be considered a promising low-dielectric-constant (low-k) material (ɛ0 < 5.7) for use in fabricating interconnections and substrates intended for integrated circuits and nanoelectronics.
- 1 January 2006
- Published by Springer Nature in Theoretical and Experimental Chemistry
- Vol. 42 (1) , 3-15
Silicon carbide nanotubes and nanotubular fibers: Synthesis, stability, structure, and classification
- 1 January 2006
- Published by Springer Nature in Theoretical and Experimental Chemistry
- Vol. 42 (1) , 3-15
Silicon carbide nanotubes and nanotubular fibers: Synthesis, stability, structure, and classification
- 1 February 2004
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 46 (2) , 392-394
Structure of “cubic graphite”: Simple cubic fullerite C24
The structure of an intermediate carbon phase, the so-called “cubic graphite,” is determined. Close agreement between the calculated and experimental lattice constants (A=0.5545 nm), densities (ρ=2.80 g/cm3), and all lines of the Debye powder pattern indicates that cubic graphite has a simple cubic lattice formed by C24 fullerene molecules copolymerized by the square faces.
- 1 February 2004
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 46 (2) , 392-394
Structure of “cubic graphite”: Simple cubic fullerite C24
The structure of an intermediate carbon phase, the so-called “cubic graphite,” is determined. Close agreement between the calculated and experimental lattice constants (A=0.5545 nm), densities (ρ=2.80 g/cm3), and all lines of the Debye powder pattern indicates that cubic graphite has a simple cubic lattice formed by C24 fullerene molecules copolymerized by the square faces.
- 1 June 2003
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 29 (6) , 494-495
Dislocation mechanism of nanotube formation
We propose a dislocation mechanism explaining the formation of multi-and single-sheet nanotubes and a disclination mechanism accounting for the formation of nanocones. According to the proposed mechanism, rolling up a graphite sheet gives rise to elastic stresses which are released through the slippage of dislocations with edge and screw components. Each closure of the sheet proceeds by a zipper mechanism and results in the formation of a single-sheet nanotube. The number of dislocation slippages is equal to the number of layers in a multisheet nanotube.
- 1 June 2003
- Published by Pleiades Publishing Ltd in Technical Physics Letters
- Vol. 29 (6) , 494-495
Dislocation mechanism of nanotube formation
We propose a dislocation mechanism explaining the formation of multi-and single-sheet nanotubes and a disclination mechanism accounting for the formation of nanocones. According to the proposed mechanism, rolling up a graphite sheet gives rise to elastic stresses which are released through the slippage of dislocations with edge and screw components. Each closure of the sheet proceeds by a zipper mechanism and results in the formation of a single-sheet nanotube. The number of dislocation slippages is equal to the number of layers in a multisheet nanotube.
- Open Access
- 12 December 2000
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Semiconductor physics, quantum electronics and optoelectronics
- Vol. 3 (4) , 550-553
Lattice of superconducting multilayer nanotubes as ideal high-temperature superconductor
- 12 December 2000
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Semiconductor physics, quantum electronics and optoelectronics
- Vol. 3 (4) , 550-553
Open AccessLattice of superconducting multilayer nanotubes as ideal high-temperature superconductor
- 1 January 1999
- Published by Pleiades Publishing Ltd in JETP Letters
- Vol. 69 (2) , 163-168
Synthesis, structure, and formation mechanism of boron nitride nanotubes
The structure and mechanism of formation and growth are investigated for two forms of BN nanotubes produced by carbothermal synthesis.
- 1 January 1999
- Published by Pleiades Publishing Ltd in JETP Letters
- Vol. 69 (2) , 163-168
Synthesis, structure, and formation mechanism of boron nitride nanotubes
The structure and mechanism of formation and growth are investigated for two forms of BN nanotubes produced by carbothermal synthesis.
- 1 May 1997
- Published by Elsevier in Materials Letters
- Vol. 31 (1-2) , 49-54
Atomistic mechanism of adhesive wear during friction of atomic-sharp tungsten asperity over (114) bcc-iron surface
- 1 May 1997
- Published by Elsevier in Materials Letters
- Vol. 31 (1-2) , 49-54
Atomistic mechanism of adhesive wear during friction of atomic-sharp tungsten asperity over (114) bcc-iron surface