DBDirk Becker

Dirk Becker

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dirk Becker has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Trade-off between signal coherence and ambient noise (3C) beamforming results in a complex noise environment

    by Dirk Becker, Hadrien Michel, Michael Kiehn, Shahar Shani-Kadmiel, Mike Tomassen, Soumen Koley, Frédéric Nguyen, Conny Hammer, Céline Hadziioannou

    Ambient seismic noise beamforming tries to identify the direction (traditional one component beamforming) or the direction and wavetype (three component beamforming) of the incoming ambient noise field. If the signal is weak, either taking longer time intervals or stacking several consecutive time windows is employed to obtain a sharper image of the underlying noise sources. However, this also reduces the temporal resolution of the noise sources and might prevent the identification of distinct sources in the case of a temporally highly variable noise field. In addition, the presence of very local, often station specific, noise sources can compromise the coherence of the seismic noise field, preventing the identification of noise sources. The identification and subsequent removal of either time intervals or single stations with exceptionally low signal correlation could thus also lead to an improvement in the temporal resolution of the seismic noise sources and the classification of the ambient seismic noise field.In this study, we investigate the ambient seismic noise field recorded with different temporary short period seismic networks in the Euregio Meuse-Rhine (EMR). The region is a candidate site for the next generation gravitational wave telescope (Einstein telescope) and characterizing the anthropogenic ambient surface noise field with high spatial and temporal variability containing many different noise sources (e.g. highways, railway lines, industry, wind turbines, urban settlements) is essential. We investigate the spatio-temporal coherence of the seismic wavefield to identify time intervals and regions with high waveform coherence which are then investigated for possible ambient noise sources. The one component and three component (when available) beamforming results are compared with results from matched field processing (MFP) to validate that the sources are outside the recording network and to estimate the possible geographic source area.We observe a clear diurnal character of the coherence of the ambient seismic noise field over a wide frequency range from about 2 to 20 Hz with significantly higher coherence values during night. This indicates the prevalence of very local noise contributions during working hours. In addition, a clear anti-correlation between wavefield coherence and wind speed also indicates the local character of wind generated noise. Limiting beamforming analysis to time windows and stations with high coherence improves the beamforming results and the temporal resolution during time intervals identified as coherent. Beamforming results during time intervals with high waveform coherence often show stable backazimuth directions indicating persistent ambient noise sources. The source location outside the recording network is confirmed by the results of the MFP analysis. This also holds for time intervals during working hours and can be confirmed by MFP processing. Results from such investigations might be used as best practices for the spatio-temporal characterization of ambient noise sources in the case of highly complex noise fields.

  • Open Access

    Fluids and Creeping Faults: Insights From Local Earthquake Tomography of the Creeping Section of the North Anatolian Fault

    by Joel Szrek, Romain Jolivet, Bernd Schurr, Dirk Becker, Patricia Martínez-Garzón, Jorge Jara, Ziyadin Çakir

    Aseismic slip plays a key role in earthquake dynamics, but we currently do not fully understand why some faults slide aseismically. Aseismic slip is largely influenced by the fault zone's frictional behaviour, by its material composition, the presence of fluids, the geometry of the fault, and the fault zone fabric. Recent research has focused on the material composition, and more specifically on the evolution of resistance to slip with slip speed for different types of rocks. Generally, faults with rate-weakening behavior tend to host earthquakes, while faults with rate-strengthening behavior accommodate stress through aseismic slip. However, even in rate-weakening materials, low effective normal stress, induced by high pore fluid pressure, makes it unlikely for a slip instability to reach the critical size needed to nucleate regular earthquakes. Hence, the presence of high pressure fluid within fault zones may explain the presence of shallow aseismic slip along faults. However, we lack direct evidence of the presence of fluids along various faults where aseismic slip has been identified.We use data from a dense network of seismometers along the North Anatolian Fault Zone SEISMENET1 to investigate spatial changes in seismic velocity along the section hosting aseismic slip. This section slips aseismically since at least 1944 and is the epicentral region of the last two large earthquakes that have struck the area, namely the 1944 M7.3 Bolu-Gerede and the 1943 M7.6 Tosia-Ladik earthquakes. Using local earthquake tomography, we test for a possible presence of fluids in the fault zone and a damage zone surrounding the epicentral region of the 1943 and 1944 earthquakes.Our network includes 5 broadband seismometers and 10 geophones deployed around the creeping section along a narrow swath paralleling the fault trace. In addition to data from these 15 temporary stations, seismic data from 5 permanent broadband stations were collected. The final dataset includes 24,756 P arrivals and 21,311 S arrivals from 2,272 earthquakes, with magnitudes ranging from Mw0 to Mw4. We use the simul2023 code2 to simultaneously determine the 3D structure of the shallow crust and relocate the earthquake hypocenters.We find kilometer-scale shallow high vp/vs anomalies (values in range of 1.8 up to 1.95), consistent with a damage asymmetry aligned with the observed rupture directions of historical earthquakes, indicating long-term preferred rupture directions along this segment of the NAF. Additionally, the creeping section of the North Anatolian Fault is shown to correspond to a 30-km-long zone of vp/vs above 1.8, consistent with the presence of high pore fluid pressure within the fault zone. The findings provide compelling evidence that fluid processes, rather than fault zone rheology alone, significantly influence aseismic slip behavior along the NAF. Together, these results suggest a dynamic interplay between structural damage, rupture history, and fluid migration in controlling fault zone mechanics, with implications for improving seismic hazard assessment in creeping fault segments. 1https://geofon.gfz.de/waveform/archive/network.php?ncode=1O&year=20222https://doi.org/10.5281/zenodo.1069507

  • Open Access

    Seismic potential of creeping segments of the North Anatolian Fault: insights from seismo-geodetic deployments and deep learning catalogs

    by Patricia Martínez-Garzón, Dirk Becker, Romain Jolivet, Jorge Jara, Ziyadin Cakir, Xiang Chen, Sebastian Nunez-Jara, Recai Feyiz Kartal, Elif Türker, Georg Dresen, et al.

    Fault zones release tectonic strain through a combination of seismic and aseismic slip. Creeping fault segments may have typically less elastic strain energy accumulated available to rupture in an earthquake compared to largely locked sections. However, where creeping fault segments transition into locked ones, stress rates are the highest as the slip deficit and stored elastic strain show large spatial along-fault gradient.The North Anatolian Fault Zone (NAFZ) in Türkiye hosts two prominent creeping segments: 1) the Ismetpasa segment on the central part of the NAFZ, which appears devoid of micro-seismicity down to magnitude M=1.8 in the regional catalogs, but hosted the nucleation of two M>7 earthquakes in 1943 and 1944; and 2) the western portion of the submarine Main Marmara Fault, which poses a high seismic risk due to its proximity to the Istanbul metropolitan region. Some of the largest earthquakes of the instrumental era (2019 M5.8 and 2025 M6.2) close to Istanbul nucleated at the eastern edge of this partially creeping segment.In this study, we combine near-fault dense seismo-geodetic deployments, with deep-learning seismicity catalogs to investigate the role of aseismic deformation in driving the seismicity and controlling the source properties along those creeping segments of the NAFZ. At the Ismetpasa segment, we present the first evidence of significant microseismicity on and up to ~5km off the main NAFZ fault branch (mostly ML < 2) surrounding the creeping patches. This microseismicity is likely driven by the aseismic slip on the main fault plane. We interpret this seismic activity as the signature of a weak, damaged fault zone surrounding the tip of the ruptures of the M>7 1943 and 1944 events. In the Marmara region, we show a series of eastward propagating M>5 events and a gradual eastward unlocking of the Main Marmara Fault over the last ~15 years. Seismic activity progresses from creeping toward transitional segments and is currently arriving at the locked Princes Islands segment south of Istanbul, which has the potential to host a M~7 earthquake. These findings highlight the role of aseismic slip in modulating the available shear stress and elastic stored energy, which, in turn, control the nucleation and arrest of large ruptures. Our results also illustrate the importance of monitoring fault systems including multi-disciplinary instrumentation that enables capturing the entire frequency band from slow to fast slip.

  • Top Cited Papers

    Progressive eastward rupture of the Main Marmara fault toward Istanbul

    by Patricia Martínez-Garzón, Xiang Chen, Dirk Becker, Sebastián Núñez-Jara, Recai Feyiz Kartal, Elif Türker, Georg Dresen, Yehuda Ben-Zion, Jorge Jara, Fabrice Cotton, et al.

    The Main Marmara fault (MMF) in northwestern Türkiye poses the highest seismic risk in broader Europe. The 2025 moment magnitude ( M W ) 6.2 event was the largest earthquake along the MMF in >60 years. We integrated observations from multiple temporal scales including the decade-long evolution of M > 5 earthquakes, their rupture dynamics, and aftershock patterns. We show a series of eastward-propagating M > 5 events and a gradual eastward partial rupture of the MMF over the past ~15 years. The seismically active portion of the fault includes creeping and transitional segments with some of the most recent seismicity located near the presumably locked Princes’ Islands segment south of Istanbul that has the potential to generate a M ~7 earthquake. Our analysis highlights the necessity of real-time monitoring of this part of the MMF.


  • Open Access

    Unraveling the spatiotemporal fault activation in a complex fault system: the run-up to the 2023 MW 7.8 Kahramanmaraş earthquake, Türkiye

    by Sebastián Núñez-Jara, Patricia Martínez-Garzón, Grzegorz Kwiatek, Yehuda Ben-Zion, Georg Dresen, Dirk Becker, Fabrice Cotton, Marco Bohnhoff


  • Open Access

    Spatio-temporal characteristics of the ambient seismic noise field at the EMR gravitational wave telescope candidate site

    by Dirk Becker, Conny Hammer, Céline Hadziioannou

    Ambient seismic noise has the potential to significantly reduce the detection capabilities of the planned next generation gravitational wave detector (so-called Einstein telescope). The noise field impacts the detector performance either directly by transferring seismic movements into the detector system or indirectly by changes to the gravitational attraction of the surrounding rockmass due to spatio-temporal density changes caused by seismic waves (so-called Newtonian noise). In order to find the best geometries for the placement of the subsurface detection chambers, allow for active suppresion of detector vibrations and estimate the influence of Newtonian noise, a precise knowledge of the local ambient seismic noise field at the surface and at placement depth is vital. In this context, the amplitudes, source locations and durations of distinct natural and anthropogenic noise sources of the ambient noise field are all of interest.Here, we present first results from investigations in the EMR region (Euregio Meuse-Rhine) Einstein telescope candidate site in area between Maastricht, Liège and Aachen. Data was recorded by several temporary deployments of short period sensors running for several weeks each. Possible noise sources in this region include ocean microseism from the North Sea/North Atlantic for frequencies below 1 Hz and wind farms, transportation infrastructure like highways and railways and heavy machinery as anthropogenic sources in the frequency range above 1 Hz. Apart from spectral analysis to determine the frequency resolved spatio-temporal amplitude changes at the recording sites, we also investigate the signal coherence over the network to estimate frequency bands, time intervals and (sub-)networks that could be used for further coherence based analysis. We then apply classical array analysis and Matched Field Processing (MFP) to pinpoint possible source locations of the seismic wavefield outside and within the posssible placement area of the Einstein telescope candidate site.

  • Stress Drop Variations of (A)Seismic Fault Segments in the Sea of Marmara Region (Northwestern Türkiye) Supported by Different Methodological Approaches

    by Xiang Chen, Grzegorz Kwiatek, Dino Bindi, Dirk Becker, Marco Bohnhoff, Fabrice Cotton, Patricia Martínez-Garzón

    Earthquake source parameters provide key diagnostic observations to quantify the seismogenic environment and understand earthquake physics. Among them, earthquake stress drop plays an essential role in impacting the frequency content of ground motion. Accurate stress-drop estimation is conditioned on data quality, appropriate modeling of propagation effects, and selection of the source model and inversion techniques. One way to evaluate reliability of stress-drop assessments is to compare results combining different methodologies and assumptions. In this study, we calculate earthquake source parameters for micro- to moderate earthquakes in the Sea of Marmara region, northwestern Türkiye, where the Main Marmara fault encompasses a spectrum of slip behaviors from creeping to locked. We apply two approaches: (1) a spectral fitting approach to constrain the corner frequency, seismic moment, and quality factor, and (2) a nonparametric spectral decomposition approach to isolate source spectra from propagation and site effects. We then estimate the earthquake stress drop using a Brune source model. This leads to source parameter estimates for 1577 and 1549 earthquakes with ML (1.0–5.7) for the spectral fitting and spectral decomposition approaches, respectively. Despite the fundamental differences in methodologies, results from both methods are consistent, particularly in highlighting relative differences within the dataset. Small but statistically significant spatial stress-drop variations are observed along different fault segments of the Main Marmara fault. In particular, lower average stress drops are observed in fault segments partially releasing slip aseismically, with the lowest values observed surrounding earthquake repeaters, which may imply a weaker fault in the creeping region. The M ≥ 5 earthquakes along the Main Marmara fault within the last decade were not followed by significant changes in the stress drop, suggesting no significant reduction of fault stress level or fault strength due to their occurrence, supporting the presumably high stress level on this fault.


  • Performance of AI-Based Phase Picking and Event Association Methods after the Large 2023 Mw 7.8 and 7.6 Türkiye Doublet

    by Dirk Becker, Ian W. McBrearty, Gregory C. Beroza, Patricia Martínez-Garzón

    On 6 February 2023, a devastating earthquake doublet consisting of Mw 7.8 and 7.6 events separated by about 9 hr struck the southeastern part of Türkiye. The developing aftershock sequence contained thousands of events during the first few days and overwhelmed the routine algorithms handling their detection and location. In addition, several stations temporarily lost real-time contact and came online again later. At the same time the Omori decay of the aftershock event rate reduced the event frequency and allowed for inclusion of progressively smaller-magnitude events with time. One possibility to help deal with such a complex situation is the use of machine learning (ML) methods to generate earthquake catalogs with a substantially higher number of events. Here, we present high-resolution earthquake catalogs derived with two ML association methods for the first five days of the aftershock sequence of this doublet. In terms of the number of reliably located events, the event catalog created from PhaseNet picks and the GENIE phase association method outperforms both the routine regional catalog and the second ML-derived catalog obtained from the GaMMA phase association method. Although both GaMMA and GENIE catalogs detect about 6 times more events than the routine catalog, GENIE associates on average about double the phases to a single event than GaMMA, which results in better constrained event locations. The spatiotemporal evolution of the event rates is sensitive to changes in the network geometry due to variable station availability. During the first few days, no decay of the event rate in the enhanced catalog is observed due to the inclusion of progressively smaller-magnitude events with time and increased station availability. This study indicates that ML-derived earthquake catalogs for challenging time periods like the early aftershock sequences of large earthquakes have the potential to significantly improve routine event catalogs.


  • Open Access

    Months-long seismicity transients preceding the 2023 MW 7.8 Kahramanmaraş earthquake, Türkiye

    by G. Kwiatek, P. Martínez-Garzón, D. Becker, G. Dresen, F. Cotton, G. C. Beroza, D. Acarel, S. Ergintav, M. Bohnhoff

    Short term prediction of earthquake magnitude, time, and location is currently not possible. In some cases, however, documented observations have been retrospectively considered as precursory. Here we present seismicity transients starting approx. 8 months before the 2023 MW 7.8 Kahramanmaraş earthquake on the East Anatolian Fault Zone. Seismicity is composed of isolated spatio-temporal clusters within 65 km of future epicentre, displaying non-Poissonian inter-event time statistics, magnitude correlations and low Gutenberg-Richter b-values. Local comparable seismic transients have not been observed, at least since 2014. Close to epicentre and during the weeks prior to its rupture, only scarce seismic activity was observed. The trends of seismic preparatory attributes for this earthquake follow those previously documented in both laboratory stick-slip tests and numerical models of heterogeneous earthquake rupture affecting multiple fault segments. More comprehensive earthquake monitoring together with long-term seismic records may facilitate recognizing earthquake preparation processes from other regional deformation transients.


  • Open Access

    The 2022 MW 6.0 Gölyaka–Düzce earthquake: an example of a medium-sized earthquake in a fault zone early in its seismic cycle

    by Patricia Martínez-Garzón, Dirk Becker, Jorge Jara, Xiang Chen, Grzegorz Kwiatek, Marco Bohnhoff

    On 23 November 2022, a MW 6.0 earthquake occurred in the direct vicinity of the MW 7.1 Düzce earthquake that ruptured a portion of the North Anatolian Fault in 1999. The Mw 6.0 event was attributed to a small portion of the Karadere fault off the main North Anatolian Fault that did not rupture during the 1999 sequence. We analyze the spatiotemporal evolution of the MW 6.0 Gölyaka–Düzce seismic sequence at various scales and resolve the source properties of the mainshock. Modeling the decade-long evolution of the background seismicity of the Karadere fault employing an Epistemic Type Aftershock Sequence model shows that this fault was almost seismically inactive before 1999, while a progressive increase in seismic activity is observed from 2000 onwards. A newly generated high-resolution seismicity catalog from 1 month before the mainshock until 6 d after was created using artificial-intelligence-aided techniques and shows only a few events occurring within the rupture area within the previous month, no spatiotemporal localization process and a lack of immediate foreshocks preceding the rupture. The aftershock hypocenter distribution suggests the activation of both the Karadere fault, which ruptured in this earthquake, and the Düzce fault that ruptured in 1999. First results on the source parameters and the duration of the first P-wave pulse from the mainshock suggest that the mainshock propagated eastwards, which is in agreement with predictions from a bimaterial interface model. The MW 6.0 Gölyaka–Düzce event represents a good example of an earthquake rupture with damaging potential within a fault zone that is in a relatively early stage of the seismic cycle.