Alexandra V. Logvinova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexandra V. Logvinova has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Bair G. Bazarov
Siberian branch Laboratory of Oxide Systems Baikal Institute of Nature Management Russian Academy of Sciences Ulan-Ude 670047 Russia
7 shared publications - Yunna L. Tushinova
Siberian branch Laboratory of Oxide Systems Baikal Institute of Nature Management Russian Academy of Sciences Ulan-Ude 670047 Russia
5 shared publications - Evgeniy V. Kovtunets
Institute of Natural Sciences, Buryat State University, 671207 Buryat, Russia
4 shared publications - Tatiyana S. Spiridonova
Siberian branch Laboratory of Oxide Systems Baikal Institute of Nature Management Russian Academy of Sciences Ulan-Ude 670047 Russia
4 shared publications - Tsyrendyzhit T. Bazarova
Siberian branch Laboratory of Oxide Systems Baikal Institute of Nature Management Russian Academy of Sciences Ulan-Ude 670047 Russia
4 shared publications - Jibzema G. Bazarova
Baikal Institute of Nature Management SB RAS
3 shared publications
Latest Publications
- Open Access
- 25 September 2025
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 27 (3) , 380-390
Ternary molybdate K5Cu0.5Hf1.5(MoO4)6: synthesis, structure, thermal expansion and ionic conductivity
Objective: A novel ternary molybdate, K5Cu0.5Hf1.5(MoO4)6, was synthesized using solid-state ceramic method. The sequence of chemical transformations involved in its formation was determined, revealing that the compound undergoes incongruent melting at 634 °C.Experimental: The crystal structure was refined using the Rietveld method, revealing a trigonal structure (space group R3c) with unit cell parameters a = 10.5617(2) Å; c = 37.5017(7) Å; V= 3622.9(1) Å3, Rwp = 3.78. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy confirmed the presence of isolated MoO4 tetrahedra. The electrical conductivity of the title compound reached 7.5·10–4 S/cm at 550°C, with an activation energy Еа = 0.9 eV. Thermal deformations were investigated by high temperature powder X-ray diffraction (HT-XRD) over the temperature range of 30–500 °C.Results: K5Cu0.5Hf1.5(MoO4)6 was classified as a high thermal expansion material (αV = 45·10–6 °C–1 at 500 °C), and exhibited low anisotropy. Combined results from electrochemical impedance spectroscopy (EIS) and HT-XRD indicated that the endothermic peak observed at 479 °С in the differential scanning calorimetry (DSC) curve corresponded to a first-order phase transition
- 25 September 2025
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 27 (3) , 380-390
Open AccessTernary molybdate K5Cu0.5Hf1.5(MoO4)6: synthesis, structure, thermal expansion and ionic conductivity
Objective: A novel ternary molybdate, K5Cu0.5Hf1.5(MoO4)6, was synthesized using solid-state ceramic method. The sequence of chemical transformations involved in its formation was determined, revealing that the compound undergoes incongruent melting at 634 °C.Experimental: The crystal structure was refined using the Rietveld method, revealing a trigonal structure (space group R3c) with unit cell parameters a = 10.5617(2) Å; c = 37.5017(7) Å; V= 3622.9(1) Å3, Rwp = 3.78. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy confirmed the presence of isolated MoO4 tetrahedra. The electrical conductivity of the title compound reached 7.5·10–4 S/cm at 550°C, with an activation energy Еа = 0.9 eV. Thermal deformations were investigated by high temperature powder X-ray diffraction (HT-XRD) over the temperature range of 30–500 °C.Results: K5Cu0.5Hf1.5(MoO4)6 was classified as a high thermal expansion material (αV = 45·10–6 °C–1 at 500 °C), and exhibited low anisotropy. Combined results from electrochemical impedance spectroscopy (EIS) and HT-XRD indicated that the endothermic peak observed at 479 °С in the differential scanning calorimetry (DSC) curve corresponded to a first-order phase transition
- Open Access
- 28 February 2025
- Published by Bentham Science Publishers Ltd. in The Open Chemical Engineering Journal
- Vol. 19 (1)
KCo1/2Hf1/2(MoO4)2 – A Novel Glaserite-like Molybdate Exhibiting Two-dimensional Negative Thermal Expansion
Introduction: Due to the peculiarities of the crystal structure and composition, complex molybdates exhibit valuable functional properties. Although the intensive search for NTE materials has been going on for many years, the investigation of the mechanisms and structure-property relationships causing the “thermal shrinkage” effect is still relevant. Here, we report on the 2D-NTE effect in a new ternary molybdate KCo1/2Hf1/2(MoO4)2 with a layered glaserite-like structure, and its thermal deformations and ionic conductivity were investigated. Methods: The KCo1/2Hf1/2(MoO4)2 was synthesized through the ceramic method. HT-PXRD patterns were acquired using a Bruker D8 ADVANCE diffractometer and subsequently utilized for Rietveld analysis. Structure refinement and lattice parameter calculations were conducted with TOPAS 4.2, while calculation of the thermal expansion tensor and visualization were carried out in the TTT. ATR-IR spectroscopy was used to characterize the coordination of the molybdenum atoms. TG and DSC analyses were performed using an STA 449 F1 Jupiter thermal analyzer. Electrical conductivity was assessed using a Z-1500J impedance meter using the two-contact impedance spectroscopy method. Results: KCo1/2Hf1/2(MoO4)2 crystallizes with the trigonal glaserite-type structure in space group P3-m1 with unit cell parameters of a = 5.76190 (3), c = 7.14788 (5) Å, V = 205.51 (1) Å3, and Z = 1. DSC indicated that KCo1/2Hf1/2(MoO4)2 melted at 699°C with decomposition. The observed 2D negative thermal expansion in the ab plane did not lead to a reduction in the cell volume. The studied ternary molybdate KCo1/2Hf1/2(MoO4)2 (αV = 148×10–6 °С–1 at 600°С) can be categorized as a high-expansion material. Conclusion: KCo1/2Hf1/2(MoO4)2 has been categorized as a high-expansion material (αV = 148 × 10− 6 ◦С− 1 at 600◦С). At higher temperatures, the compound demonstrated notable ionic conductivity, values up to 0.42·10–3 S/cm (570°C) at Еа = 0.8 eV.
- 28 February 2025
- Published by Bentham Science Publishers Ltd. in The Open Chemical Engineering Journal
- Vol. 19 (1)
Open AccessKCo1/2Hf1/2(MoO4)2 – A Novel Glaserite-like Molybdate Exhibiting Two-dimensional Negative Thermal Expansion
Introduction: Due to the peculiarities of the crystal structure and composition, complex molybdates exhibit valuable functional properties. Although the intensive search for NTE materials has been going on for many years, the investigation of the mechanisms and structure-property relationships causing the “thermal shrinkage” effect is still relevant. Here, we report on the 2D-NTE effect in a new ternary molybdate KCo1/2Hf1/2(MoO4)2 with a layered glaserite-like structure, and its thermal deformations and ionic conductivity were investigated. Methods: The KCo1/2Hf1/2(MoO4)2 was synthesized through the ceramic method. HT-PXRD patterns were acquired using a Bruker D8 ADVANCE diffractometer and subsequently utilized for Rietveld analysis. Structure refinement and lattice parameter calculations were conducted with TOPAS 4.2, while calculation of the thermal expansion tensor and visualization were carried out in the TTT. ATR-IR spectroscopy was used to characterize the coordination of the molybdenum atoms. TG and DSC analyses were performed using an STA 449 F1 Jupiter thermal analyzer. Electrical conductivity was assessed using a Z-1500J impedance meter using the two-contact impedance spectroscopy method. Results: KCo1/2Hf1/2(MoO4)2 crystallizes with the trigonal glaserite-type structure in space group P3-m1 with unit cell parameters of a = 5.76190 (3), c = 7.14788 (5) Å, V = 205.51 (1) Å3, and Z = 1. DSC indicated that KCo1/2Hf1/2(MoO4)2 melted at 699°C with decomposition. The observed 2D negative thermal expansion in the ab plane did not lead to a reduction in the cell volume. The studied ternary molybdate KCo1/2Hf1/2(MoO4)2 (αV = 148×10–6 °С–1 at 600°С) can be categorized as a high-expansion material. Conclusion: KCo1/2Hf1/2(MoO4)2 has been categorized as a high-expansion material (αV = 148 × 10− 6 ◦С− 1 at 600◦С). At higher temperatures, the compound demonstrated notable ionic conductivity, values up to 0.42·10–3 S/cm (570°C) at Еа = 0.8 eV.
- Open Access
- 28 January 2025
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 12 (2) , 12208
Two-dimensional negative thermal expansion and ionic conductivity of a new glaserite-like ternary molybdate KZn 0.5 Hf 0.5 (MoO 4 ) 2
A new glaserite-like ternary molybdate KZn0.5Hf0.5(MoO4)2 was obtained through a solid-state reaction, and its structure was refined using the Rietveld method. It was found that the compound crystallizes in the trigonal space group P m1 and melts at 656 °C with decomposition. At elevated temperatures, the compound exhibited significant ionic conductivity, reaching 0.39·10–3S/cm at 570 °C with an activation energy Еа = 1.0 eV, with oxygen ions as the probable charge carriers. The infrared spectrum simulated using DFT showed good agreement with experimental data, containing characteristic stretching modes of the MoO4 tetrahedra. The observed negative thermal expansion in the ab plane did not result in a reduction in the volume of the unit cell, with αV = 98∙10–6 °С–1 at 500 °С, indicating that KZn0.5Hf0.5(MoO4)2 can be classified as a material with high thermal expansion properties.
- 28 January 2025
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 12 (2) , 12208
Open AccessTwo-dimensional negative thermal expansion and ionic conductivity of a new glaserite-like ternary molybdate KZn 0.5 Hf 0.5 (MoO 4 ) 2
A new glaserite-like ternary molybdate KZn0.5Hf0.5(MoO4)2 was obtained through a solid-state reaction, and its structure was refined using the Rietveld method. It was found that the compound crystallizes in the trigonal space group P m1 and melts at 656 °C with decomposition. At elevated temperatures, the compound exhibited significant ionic conductivity, reaching 0.39·10–3S/cm at 570 °C with an activation energy Еа = 1.0 eV, with oxygen ions as the probable charge carriers. The infrared spectrum simulated using DFT showed good agreement with experimental data, containing characteristic stretching modes of the MoO4 tetrahedra. The observed negative thermal expansion in the ab plane did not result in a reduction in the volume of the unit cell, with αV = 98∙10–6 °С–1 at 500 °С, indicating that KZn0.5Hf0.5(MoO4)2 can be classified as a material with high thermal expansion properties.
- Open Access
- 23 January 2025
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 12 (2) , 12207
Manganese- and bismuth-containing phosphors based on MMeBO 3 (M = Li, Na, K; Me = Mg, Ca, Sr, Ba, Zn) for white LEDs
White light-emitting diodes (LEDs) are a new generation of light sources that are used in solid-state lighting and information display devices. They generate less thermal radiation than incandescent and fluorescent lamps. Phosphor light-emiting diodes (PC-LEDs), which are based on this technology, have high luminous efficiency and energy efficiency; they are compact and havу a long service life. LED materials are subject to such requirements asenvironmental friendliness, transparency of the radiation source used in the excitation process, and color rendering efficiency. For use in LEDs, it is necessary to investigate optical properties of inorganic materials that are doped not only with rare earth elements (due to their high cost) but also with transition metal ions such as Mn2+. This review summarizes and analyses information on the synthesis, structure, and photoluminescent properties of borates MMeBO3, where M = Li, Na, K; Me = Mg, Ca, Sr, Ba, Zn doped with Mn2+ and Bi3+ and co-doped with rare earth metals (Ce3+, Eu3+). Impurity ions of activators, when introduced into a compound's lattice, become the main luminescent centers of phosphors. Processes of energy transfer from the sensitizer to the activator and their mechanisms are discussed. The dependence on the size and morphology of particles of the materials' luminescence efficiency is discussed. The possibility of using borates as matrices for phosphors emitting red light is shown, along with their tunable luminescence for use in white LEDs and autoemission displays.
- 23 January 2025
- Published by Ural Federal University in Chimica Techno Acta
- Vol. 12 (2) , 12207
Open AccessManganese- and bismuth-containing phosphors based on MMeBO 3 (M = Li, Na, K; Me = Mg, Ca, Sr, Ba, Zn) for white LEDs
White light-emitting diodes (LEDs) are a new generation of light sources that are used in solid-state lighting and information display devices. They generate less thermal radiation than incandescent and fluorescent lamps. Phosphor light-emiting diodes (PC-LEDs), which are based on this technology, have high luminous efficiency and energy efficiency; they are compact and havу a long service life. LED materials are subject to such requirements asenvironmental friendliness, transparency of the radiation source used in the excitation process, and color rendering efficiency. For use in LEDs, it is necessary to investigate optical properties of inorganic materials that are doped not only with rare earth elements (due to their high cost) but also with transition metal ions such as Mn2+. This review summarizes and analyses information on the synthesis, structure, and photoluminescent properties of borates MMeBO3, where M = Li, Na, K; Me = Mg, Ca, Sr, Ba, Zn doped with Mn2+ and Bi3+ and co-doped with rare earth metals (Ce3+, Eu3+). Impurity ions of activators, when introduced into a compound's lattice, become the main luminescent centers of phosphors. Processes of energy transfer from the sensitizer to the activator and their mechanisms are discussed. The dependence on the size and morphology of particles of the materials' luminescence efficiency is discussed. The possibility of using borates as matrices for phosphors emitting red light is shown, along with their tunable luminescence for use in white LEDs and autoemission displays.
- Open Access
- 27 December 2024
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 14 (4) , 444-452
Thermal expansion and ionic conductivity of K5Pb0,5Zr1,5 (MoO4)6
The present study is aimed at the directed synthesis of a new ternary molybdate K5Pb0.5Zr1.5(MoO4)6 isostructural to K5Pb0.5Hf1.5(MoO4)6 by solid-phase reaction within the temperature range of 350–550 °С (for 100 h). The compound crystallizes in the rhombohedral system with the space group R3̅ and unit cell parameters of a = 10.6604(2) Å, c = 37.9769(9) Å, and V = 3737.6(2) Å3. The structure was refined using the Rietveld method. The atomic positions were refined in the isotropic approximation, with soft constraints on Mo–O distances and O–Mo–O bond angles. The crystal structure constitutes a 3D scaffold comprising PbO6 and ZrO6 octahedrons and MoO4 tetrahedrons sharing oxygen vertices. The thermal expansion of K5Pb0.5Zr1.5(MoO4)6 was studied via high-temperature X-ray powder diffraction. The calculated thermal expansion coefficients along both crystallographic axes remain positive over the entire temperature range. In this case, the value of αa remains constant, while that of αc increases with rising temperature. The obtained ternary molybdate belongs to materials with high thermal expansion (αV = 60×10-6 °С-1). The significant anisotropy in the crystallographic direction c can be attributed to the soft K–O and Pb-O bonds. The electrical conductivity of K5Pb0.5Zr1.5(MoO4)6 was studied via impedance spectroscopy within the temperature range of 30–500 °С; at 500 °С, the conductivity amounted to 0.7×10-4 S/cm, with Ea = 0.59 eV.
- 27 December 2024
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 14 (4) , 444-452
Open AccessThermal expansion and ionic conductivity of K5Pb0,5Zr1,5 (MoO4)6
The present study is aimed at the directed synthesis of a new ternary molybdate K5Pb0.5Zr1.5(MoO4)6 isostructural to K5Pb0.5Hf1.5(MoO4)6 by solid-phase reaction within the temperature range of 350–550 °С (for 100 h). The compound crystallizes in the rhombohedral system with the space group R3̅ and unit cell parameters of a = 10.6604(2) Å, c = 37.9769(9) Å, and V = 3737.6(2) Å3. The structure was refined using the Rietveld method. The atomic positions were refined in the isotropic approximation, with soft constraints on Mo–O distances and O–Mo–O bond angles. The crystal structure constitutes a 3D scaffold comprising PbO6 and ZrO6 octahedrons and MoO4 tetrahedrons sharing oxygen vertices. The thermal expansion of K5Pb0.5Zr1.5(MoO4)6 was studied via high-temperature X-ray powder diffraction. The calculated thermal expansion coefficients along both crystallographic axes remain positive over the entire temperature range. In this case, the value of αa remains constant, while that of αc increases with rising temperature. The obtained ternary molybdate belongs to materials with high thermal expansion (αV = 60×10-6 °С-1). The significant anisotropy in the crystallographic direction c can be attributed to the soft K–O and Pb-O bonds. The electrical conductivity of K5Pb0.5Zr1.5(MoO4)6 was studied via impedance spectroscopy within the temperature range of 30–500 °С; at 500 °С, the conductivity amounted to 0.7×10-4 S/cm, with Ea = 0.59 eV.
- Open Access
- 6 January 2022
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 11 (4) , 508-516-516
Interactions in ternary bismuth-containing molybdate systems M2MoO4-Bi2(MoO4)3-Zr(MoO4)2 in the subsolidus region
A fundamental problem in materials science consists in establishing a relationship between the chemical composition, structure, and properties of materials. This issue can be solved through the study of multicomponent systems and the directed synthesis of promising compounds. Of practical interest here are active dielectrics that are based on complex oxide compounds, specifically molybdates. Among complex molybdates and tungstates, ternary caged molybdates of the following structural types are of greatest importance: nasicon, perovskite, langbeinite, etc. Due to their widely varying elemental and quantitative compositions, such molybdates are convenient models for structural and chemical design, as well as the establishment of “composition–structure– properties” genetic relationships. Bismuth-containing complex molybdate systems exhibit the formation of phases having ferro-piezoelectric, ionic, and other properties. In this work, the Rb2MoO4–Bi2(MoO4)3–Zr(MoO4)2 ter nary salt system was studied for the first time using the method of intersecting sections in the subsolidus region (450–650 ℃). To this end, quasibinary sections were identified; triangulation was performed. Ternary molybdates Rb5BiZr(MoO4)6 and Rb2BiZr2(MoO4)6,5 were formed in the system using a ceramic technology. These compounds are isostructural to the previously obtained REE molybdates (M5LnZr(MoO4)6) but contain trivalent bismuth instead of rare earth elements. The structure of Rb5BiZr(MoO4)6 was adjusted via the Rietveld refinement technique using the TOPAS 4.2 software package. The ternary molybdate crystallizes in a trigonal system, with the following unit cell parameters of the R`3c space group: a = 10.7756(2) and c = 39.0464(7) Å. According to the studies of thermal properties exhibited by M5BiZr(MoO4)6, these ternary molybdates undergo the first-order phase transition in the temperature range of 450–600 ºC. The IR and Raman spectra of M5BiZr(MoO4)6 reveal the crystallization of ternary molybdates in the R`3c space group. The conducted comparative characterization of M2MoO4–Bi2(MoO4)3–Zr(MoO4)2 phase diagrams suggests that the phase equilibria of these systems depend on the nature of molybdates of monovalent elements.
- 6 January 2022
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 11 (4) , 508-516-516
Open AccessInteractions in ternary bismuth-containing molybdate systems M2MoO4-Bi2(MoO4)3-Zr(MoO4)2 in the subsolidus region
A fundamental problem in materials science consists in establishing a relationship between the chemical composition, structure, and properties of materials. This issue can be solved through the study of multicomponent systems and the directed synthesis of promising compounds. Of practical interest here are active dielectrics that are based on complex oxide compounds, specifically molybdates. Among complex molybdates and tungstates, ternary caged molybdates of the following structural types are of greatest importance: nasicon, perovskite, langbeinite, etc. Due to their widely varying elemental and quantitative compositions, such molybdates are convenient models for structural and chemical design, as well as the establishment of “composition–structure– properties” genetic relationships. Bismuth-containing complex molybdate systems exhibit the formation of phases having ferro-piezoelectric, ionic, and other properties. In this work, the Rb2MoO4–Bi2(MoO4)3–Zr(MoO4)2 ter nary salt system was studied for the first time using the method of intersecting sections in the subsolidus region (450–650 ℃). To this end, quasibinary sections were identified; triangulation was performed. Ternary molybdates Rb5BiZr(MoO4)6 and Rb2BiZr2(MoO4)6,5 were formed in the system using a ceramic technology. These compounds are isostructural to the previously obtained REE molybdates (M5LnZr(MoO4)6) but contain trivalent bismuth instead of rare earth elements. The structure of Rb5BiZr(MoO4)6 was adjusted via the Rietveld refinement technique using the TOPAS 4.2 software package. The ternary molybdate crystallizes in a trigonal system, with the following unit cell parameters of the R`3c space group: a = 10.7756(2) and c = 39.0464(7) Å. According to the studies of thermal properties exhibited by M5BiZr(MoO4)6, these ternary molybdates undergo the first-order phase transition in the temperature range of 450–600 ºC. The IR and Raman spectra of M5BiZr(MoO4)6 reveal the crystallization of ternary molybdates in the R`3c space group. The conducted comparative characterization of M2MoO4–Bi2(MoO4)3–Zr(MoO4)2 phase diagrams suggests that the phase equilibria of these systems depend on the nature of molybdates of monovalent elements.
- 14 December 2020
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 56 (12) , 1278-1283
Phase Relations in the Rb2MoO4–R2(MoO4)3–Zr(MoO4)2 (R = Al, Fe, Cr, Y) Systems
Subsolidus phase relations in the Rb2MoO4–R2(MoO4)3–Zr(MoO4)2 (R = Al, Fe, Cr, Y) systems have been studied for the first time by the method of “intersecting cuts.” Eight new triple molybdates, with the compositions Rb5RZr(MoO4)6 (R = Al, Fe, Cr, Y), RbRZr0.5(MoO4)3 (R = Al, Cr, Fe), and Rb2YZr2(MoO4)6.5, have been identified in these systems. The thermal properties and crystallographic characteristics of some molybdates have been assessed.
- 14 December 2020
- Published by Pleiades Publishing Ltd in Inorganic Materials
- Vol. 56 (12) , 1278-1283
Phase Relations in the Rb2MoO4–R2(MoO4)3–Zr(MoO4)2 (R = Al, Fe, Cr, Y) Systems
Subsolidus phase relations in the Rb2MoO4–R2(MoO4)3–Zr(MoO4)2 (R = Al, Fe, Cr, Y) systems have been studied for the first time by the method of “intersecting cuts.” Eight new triple molybdates, with the compositions Rb5RZr(MoO4)6 (R = Al, Fe, Cr, Y), RbRZr0.5(MoO4)3 (R = Al, Cr, Fe), and Rb2YZr2(MoO4)6.5, have been identified in these systems. The thermal properties and crystallographic characteristics of some molybdates have been assessed.
- Open Access
- 21 September 2020
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 22 (3) , 353-359
Получение железо-содержащего тройного молибдата K5FeZr(MoO4)6 золь-гель технологией
Oxide compounds, as the basis of promising materials, are used in various fields of modern technologies due to their electrical and optical properties. Some of them, possessing a combination of ferroelectric, scintillation, electrical, and optical properties, are being studied as promising materials for electronics. In this case, their dispersion plays an important role. Traditionally, the synthesis of oxide compounds is carried out by ceramic technology. More promising for the synthesis of fine powders are the methods of “soft” chemistry, among which we have identified and applied the sol-gel method. In this method, “mixing” occurs at the molecular level, which contributes to an increase in the reaction rates and a decrease in the synthesis temperature. The method involves the use of inorganic salts as precursors in combination with complexing agents (citric acid). The use of such precursors allows one to achieve high uniformity at relatively low temperatures. A feature of this approach is the use of fewer organic compounds: an aqueous solution of citric acid is used as a chelating agent. The aim of this work was to obtain triple molybdate by sol-gel technology (SGT) based on the example of ironcontaining potassium zirconium molybdate. The iron-containing triple potassium zirconium molybdate was obtained using the of citrate sol-gel technology and solidphase synthesis (SPS) methods. The triple molybdate obtained by two methods was characterized by X-ray phase analysis, DSC, and impedance spectroscopy. The developed sol-gel synthesis technique allowed lowering the synthesis temperature, to obtain triple molybdate with high values of homogeneity, dispersion, and electrical conductivity. This technique can be used to obtain double and triple zirconium (hafnium) molybdates containing a trivalent cation. REFERENCES 1 . Sorokin N. I. Ionic conductivity of KMgCr(MoO4)3 molybdate . Crystallography Reports. 2017;62(3): 416–418. DOI: https://doi.org/10.1134/s106377451703021x 2. Pavlova Je. T., Cyrenova G. D., Lazorjak B. I., Solodovnikov S. F. Structure and properties of double silver-containing molybdates of the composition Ag2A2(MoO4)3 (A = Mg, Mn, Cu). BSU bulletin. Chemistry. Physics. 2015;3: 3–7. Available at: https://elibrary.ru/item.asp?id=23233672 (In Russ., abstract in Eng.) 3. Savina A. A., Solodovnikov S. F., Belov D. A., Basovich O. M., Solodovnikova Z. A., Pokholok K. V., Stefanovich S. Yu., Lazoryak B. I., Khaikina E. G. Synthesis, crystal structure and properties of alluaudite-like triple molybdate Na25Cs8Fe5(MoO4)24. Journal of Solid State Chemistry. 2014;220: 217–220. DOI: https://doi.org/10.1016/j.jssc.2014.09.004 4. Jena P., Nallamuthua N., Patro P. K., Venkateswarlu M., Satyanarayana N. Structural characterization and electrical conductivity studies of BaMoO4 nanorods prepared by modified acrylamide assisted sol–gel process. Advances in Applied Ceramics. 2014;113(6): 372–379. DOI: https://doi.org/10.1179/1743676114Y.0000000170 5. Balsanova L. V. The synthesis of crystals of silver oxide phases based on molybdenum, investigation of their structure and properties. Vestnik VSGUTU. 2015;5(56). 63–69. Available at: https://vestnik.esstu.ru/arhives/VestnikVsgutu5_2015.pdf (In Russ., abstract in Eng.) 6. Dorzhieva S. G., Bazarov B. G., Bazarova Zh. G. New molybdates in Rb2MoO4-MI2MoO4-Zr(MoO4)2 (MI = Na, K) systems as promising ion-conducting materials. Letters on Materials. 2019;9(1): 17–21. DOI: https://doi.org/10.22226/2410-3535-2019-1-17-21 (In Russ., abstract in Eng.) 7. Spiridonova T. S., Solodovnikov S. F., Savina A. A., Kadyrova Y. M., Solodovnikova Z. A., Yudin V. N., Stefanovich S. Y. and. Khaikina E. G. New triple molybdate Rb2AgIn(MoO4)3: synthesis, framework crystal structure and ion-transport behavior. Acta Crystallographica C Structural Chemistry. 2018;74(12): 1603–1609. DOI: https://doi.org/10.1107/S2053229618014717 8. Lim C. S., Aleksandrovsky A. S., Molokeev M. S., Oreshonkov A. S., Ikonnikov D. A. and Atuchin V. V. Triple molybdate scheelite-type upconversion phosphor NaCaLa(MoO4)3: Er3+/Yb3+: structural and spectroscopic properties. Dalton Transactions. 2016;45(39): 15541–15551. DOI: https://doi.org/10.1039/C6DT02378A 9. Dorzhieva S. G., Tushinova Y. L., Bazarov B. G., Bazarova Z. G., Nepomniashchikh A. I., Shendrik R. Y. Luminescence of Ln-Zr molybdates. Bulletin of the Russian Academy of Sciences: Physics. 2015;79(2): 276–279. DOI: https://doi.org/10.3103 /S1062873815020070 10. Liao J., Zhou D., Yang B., Liu R., Zhang Q. and Zhou Q. H. Sol-gel preparation and photoluminescence properties of CaLa2(MoO4)4: Eu3+ phosphors. Journal of Luminescence. 2013;134: 533–538. DOI: https://doi.org/10.1016/j.jlumin.2012.07.033 11. Kozhevnikova N. M. Synthesis and luminescence properties of a Li3Ba2La3(MoO4)8: Er3+ phosphor with a scheelite-like structure. Inorganic Materials. 2019;55(6): 607–611. DOI: https://doi.org/10.1134/s0020168519060098 12. Sofich D., Shendrik R. Y., Dorzhieva S. G., Chimitova O. D., Bazarov B. G., Tushinova Y. L., Bazarova Z. G. Luminescence of Pr3+ and Nd3+ ions in double molybdates. Physics of the Solid State. 2019;61(5): С. 844-846. DOI: https://doi.org/10.1134/s1063783419050342 13. Guo C., Yang H.K., Jeong J.-H. Preparation and luminescent properties of phosphor MgD2(MoO4)4: Eu3+ (M=Ca, Sr, and Ba). Journal of Luminescence. 2010;130(8): 1390–1393 DOI: https://doi.org/10.1016/j.jlumin.2010.02.052 14. Liao C., Cao R., Wang W., Hu W., Zheng G., Luo Z. and Liu P. Photoluminescence properties and energy transfer of NaY(MoO4)2: R (R = Sm3+ /Bi3+, Tb3+ / Bi3+, Sm3+ /Tb3+) phosphors. Materials Research Bulletin. 2018;97: 490–496. DOI: https://doi.org/10.1016/j.materresbull.2017.09.053 15. Song M., Liu Y., Liu Y., Wang L., Zhang N., Wang X., Huang Z., Ji C. Sol-gel synthesis and luminescent properties of a novel KBaY(MoO4)3: Dy3+ phosphor for white light emission. Journal of Luminescence. 2019; 211: 218–226. DOI: https://doi.org/10.1016/j.jlumin.2019.03.052 16. Grossman V. G., Bazarova J. G., Molokeev M. S. and Bazarov B. G. New triple molybdate K5ScHf(MoO4)6: Synthesis, properties, structure and phase equilibria in the M2MoO4–Sc2(MoO4)3–Hf(MoO4)2 (M = Li, K) systems. Journal of Solid State Chemistry. 2020;283: 121- 143. D O I : https://doi.org/10.1016/j.jssc.2019.121143 17. Bazarova Zh. G., Grossman V. G., Bazarov B. G., Tushinova Yu. L., Chimitova O. D., Bazarova Ts. T. Phase diagrams for the M2MoO4-Ln2(MoO4)3-Hf(MoO4)2 systems, where M = Li-Cs, Tl and Ln = La-Lu. Chimica Techno Acta. 2017;4(4): 224–230. DOI: https://doi.org/10.15826/chimtech/2017.4.4.03 18. Braziulis G., Janulevicius G., Stankeviciute R., Zalga A. Aqueoussol–gelsynthesisand thermoanalytical study of the alkaline earth molybdate precursors. Journal of Thermal Analysis and Calorimetry. 2014;118(2): 613–621. DOI: https://doi.org/10.1007/s10973-013-3579-0 19. Bazarov B. G., Klevcova R. F., Cyrendorzhieva A. D., Glinkaja L. A., Bazarova Zh. G. Crystal structure of triple molybdate Rb5FeHf(MoO4)6 – a new phase in the Rb2MoO4 - Fe2(MoO4)3 - Hf(MoO4)2 system. Journal of Structural Chemistry. 2004;45(6); 993–998. DOI: https://doi.org/10.1007/s10947-005-0091-9
- 21 September 2020
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 22 (3) , 353-359
Open AccessПолучение железо-содержащего тройного молибдата K5FeZr(MoO4)6 золь-гель технологией
Oxide compounds, as the basis of promising materials, are used in various fields of modern technologies due to their electrical and optical properties. Some of them, possessing a combination of ferroelectric, scintillation, electrical, and optical properties, are being studied as promising materials for electronics. In this case, their dispersion plays an important role. Traditionally, the synthesis of oxide compounds is carried out by ceramic technology. More promising for the synthesis of fine powders are the methods of “soft” chemistry, among which we have identified and applied the sol-gel method. In this method, “mixing” occurs at the molecular level, which contributes to an increase in the reaction rates and a decrease in the synthesis temperature. The method involves the use of inorganic salts as precursors in combination with complexing agents (citric acid). The use of such precursors allows one to achieve high uniformity at relatively low temperatures. A feature of this approach is the use of fewer organic compounds: an aqueous solution of citric acid is used as a chelating agent. The aim of this work was to obtain triple molybdate by sol-gel technology (SGT) based on the example of ironcontaining potassium zirconium molybdate. The iron-containing triple potassium zirconium molybdate was obtained using the of citrate sol-gel technology and solidphase synthesis (SPS) methods. The triple molybdate obtained by two methods was characterized by X-ray phase analysis, DSC, and impedance spectroscopy. The developed sol-gel synthesis technique allowed lowering the synthesis temperature, to obtain triple molybdate with high values of homogeneity, dispersion, and electrical conductivity. This technique can be used to obtain double and triple zirconium (hafnium) molybdates containing a trivalent cation. REFERENCES 1 . Sorokin N. I. Ionic conductivity of KMgCr(MoO4)3 molybdate . Crystallography Reports. 2017;62(3): 416–418. DOI: https://doi.org/10.1134/s106377451703021x 2. Pavlova Je. T., Cyrenova G. D., Lazorjak B. I., Solodovnikov S. F. Structure and properties of double silver-containing molybdates of the composition Ag2A2(MoO4)3 (A = Mg, Mn, Cu). BSU bulletin. Chemistry. Physics. 2015;3: 3–7. Available at: https://elibrary.ru/item.asp?id=23233672 (In Russ., abstract in Eng.) 3. Savina A. A., Solodovnikov S. F., Belov D. A., Basovich O. M., Solodovnikova Z. A., Pokholok K. V., Stefanovich S. Yu., Lazoryak B. I., Khaikina E. G. Synthesis, crystal structure and properties of alluaudite-like triple molybdate Na25Cs8Fe5(MoO4)24. Journal of Solid State Chemistry. 2014;220: 217–220. DOI: https://doi.org/10.1016/j.jssc.2014.09.004 4. Jena P., Nallamuthua N., Patro P. K., Venkateswarlu M., Satyanarayana N. Structural characterization and electrical conductivity studies of BaMoO4 nanorods prepared by modified acrylamide assisted sol–gel process. Advances in Applied Ceramics. 2014;113(6): 372–379. DOI: https://doi.org/10.1179/1743676114Y.0000000170 5. Balsanova L. V. The synthesis of crystals of silver oxide phases based on molybdenum, investigation of their structure and properties. Vestnik VSGUTU. 2015;5(56). 63–69. Available at: https://vestnik.esstu.ru/arhives/VestnikVsgutu5_2015.pdf (In Russ., abstract in Eng.) 6. Dorzhieva S. G., Bazarov B. G., Bazarova Zh. G. New molybdates in Rb2MoO4-MI2MoO4-Zr(MoO4)2 (MI = Na, K) systems as promising ion-conducting materials. Letters on Materials. 2019;9(1): 17–21. DOI: https://doi.org/10.22226/2410-3535-2019-1-17-21 (In Russ., abstract in Eng.) 7. Spiridonova T. S., Solodovnikov S. F., Savina A. A., Kadyrova Y. M., Solodovnikova Z. A., Yudin V. N., Stefanovich S. Y. and. Khaikina E. G. New triple molybdate Rb2AgIn(MoO4)3: synthesis, framework crystal structure and ion-transport behavior. Acta Crystallographica C Structural Chemistry. 2018;74(12): 1603–1609. DOI: https://doi.org/10.1107/S2053229618014717 8. Lim C. S., Aleksandrovsky A. S., Molokeev M. S., Oreshonkov A. S., Ikonnikov D. A. and Atuchin V. V. Triple molybdate scheelite-type upconversion phosphor NaCaLa(MoO4)3: Er3+/Yb3+: structural and spectroscopic properties. Dalton Transactions. 2016;45(39): 15541–15551. DOI: https://doi.org/10.1039/C6DT02378A 9. Dorzhieva S. G., Tushinova Y. L., Bazarov B. G., Bazarova Z. G., Nepomniashchikh A. I., Shendrik R. Y. Luminescence of Ln-Zr molybdates. Bulletin of the Russian Academy of Sciences: Physics. 2015;79(2): 276–279. DOI: https://doi.org/10.3103 /S1062873815020070 10. Liao J., Zhou D., Yang B., Liu R., Zhang Q. and Zhou Q. H. Sol-gel preparation and photoluminescence properties of CaLa2(MoO4)4: Eu3+ phosphors. Journal of Luminescence. 2013;134: 533–538. DOI: https://doi.org/10.1016/j.jlumin.2012.07.033 11. Kozhevnikova N. M. Synthesis and luminescence properties of a Li3Ba2La3(MoO4)8: Er3+ phosphor with a scheelite-like structure. Inorganic Materials. 2019;55(6): 607–611. DOI: https://doi.org/10.1134/s0020168519060098 12. Sofich D., Shendrik R. Y., Dorzhieva S. G., Chimitova O. D., Bazarov B. G., Tushinova Y. L., Bazarova Z. G. Luminescence of Pr3+ and Nd3+ ions in double molybdates. Physics of the Solid State. 2019;61(5): С. 844-846. DOI: https://doi.org/10.1134/s1063783419050342 13. Guo C., Yang H.K., Jeong J.-H. Preparation and luminescent properties of phosphor MgD2(MoO4)4: Eu3+ (M=Ca, Sr, and Ba). Journal of Luminescence. 2010;130(8): 1390–1393 DOI: https://doi.org/10.1016/j.jlumin.2010.02.052 14. Liao C., Cao R., Wang W., Hu W., Zheng G., Luo Z. and Liu P. Photoluminescence properties and energy transfer of NaY(MoO4)2: R (R = Sm3+ /Bi3+, Tb3+ / Bi3+, Sm3+ /Tb3+) phosphors. Materials Research Bulletin. 2018;97: 490–496. DOI: https://doi.org/10.1016/j.materresbull.2017.09.053 15. Song M., Liu Y., Liu Y., Wang L., Zhang N., Wang X., Huang Z., Ji C. Sol-gel synthesis and luminescent properties of a novel KBaY(MoO4)3: Dy3+ phosphor for white light emission. Journal of Luminescence. 2019; 211: 218–226. DOI: https://doi.org/10.1016/j.jlumin.2019.03.052 16. Grossman V. G., Bazarova J. G., Molokeev M. S. and Bazarov B. G. New triple molybdate K5ScHf(MoO4)6: Synthesis, properties, structure and phase equilibria in the M2MoO4–Sc2(MoO4)3–Hf(MoO4)2 (M = Li, K) systems. Journal of Solid State Chemistry. 2020;283: 121- 143. D O I : https://doi.org/10.1016/j.jssc.2019.121143 17. Bazarova Zh. G., Grossman V. G., Bazarov B. G., Tushinova Yu. L., Chimitova O. D., Bazarova Ts. T. Phase diagrams for the M2MoO4-Ln2(MoO4)3-Hf(MoO4)2 systems, where M = Li-Cs, Tl and Ln = La-Lu. Chimica Techno Acta. 2017;4(4): 224–230. DOI: https://doi.org/10.15826/chimtech/2017.4.4.03 18. Braziulis G., Janulevicius G., Stankeviciute R., Zalga A. Aqueoussol–gelsynthesisand thermoanalytical study of the alkaline earth molybdate precursors. Journal of Thermal Analysis and Calorimetry. 2014;118(2): 613–621. DOI: https://doi.org/10.1007/s10973-013-3579-0 19. Bazarov B. G., Klevcova R. F., Cyrendorzhieva A. D., Glinkaja L. A., Bazarova Zh. G. Crystal structure of triple molybdate Rb5FeHf(MoO4)6 – a new phase in the Rb2MoO4 - Fe2(MoO4)3 - Hf(MoO4)2 system. Journal of Structural Chemistry. 2004;45(6); 993–998. DOI: https://doi.org/10.1007/s10947-005-0091-9
- Open Access
- 19 June 2019
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 9 (2) , 202-211
Synthesis, structure and properties of triple molybdates of the K5RZr(MoO4)6 composition in K2MoO4 – R2(MoO4)3 – Zr(MoO4)2 systems (R = trivalent elements)
- 19 June 2019
- Published by Irkutsk National Research Technical University in Proceedings of universities. Applied chemistry and biotechnology
- Vol. 9 (2) , 202-211
Open AccessSynthesis, structure and properties of triple molybdates of the K5RZr(MoO4)6 composition in K2MoO4 – R2(MoO4)3 – Zr(MoO4)2 systems (R = trivalent elements)