Genine Moreira de Freitas Guimarães
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Genine Moreira de Freitas Guimarães has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Adilson Yoshio Furuse
Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of Sao Paulo, Bauru, SP, Brazil
4 shared publications Carla Castiglia Gonzaga
School of Health Sciences, Graduate Program in Dentistry, Positivo University Curitiba, PR, Brazil
2 shared publications- Carmem Silvia Pfeifer
Oregon Health and Science University, USA
2 shared publications Adilson Yoshio Furuse
Department of Operative Dentistry, Endodontics and Dental Materials Bauru School of Dentistry, University of São Paulo (FOB‐USP) Bauru Brazil
1 shared publication- Alyssa Teixeira Obeid
Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of São Paulo, Alameda Octávio Pinheiro Brisolla, 9-75, Bauru 17012-901, SP, Brazil
1 shared publication Ana Flavia Sanches Borges
Department of Operative Dentistry, Endodontics and Dental Materials, Bauru School of Dentistry, University of Sao Paulo, Bauru, SP, Brazil
1 shared publication
Latest Publications
- 3 November 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 177
Thiourethane oligomers and functionalized TiO2 nanostructures in experimental resin composites
- 3 November 2026
- Published by Elsevier in Journal of Dentistry
- Vol. 177
Thiourethane oligomers and functionalized TiO2 nanostructures in experimental resin composites
- 26 September 2022
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 35 (3) , 442-448
The stamp technique for direct restoration in a ICDAS 4 carious lesion: A 4‐year follow‐up
Objective: This case report described the use of a stamping technique associated with a bulk fill composite to restore an ICDAS 4 carious lesion on a posterior tooth. The 4‐year follow‐up is also presented.Clinical Considerations: A 32‐year‐old patient presented a carious lesion on tooth 36 with an underlying dark shadow at the dentin seen from the noncavitated enamel occlusal surface, which was compatible with an ICDAS 4 carious lesion. The lesion was radiographically detected and the caries disease was treated with dietary and hygiene habits orientations. Before accessing the lesion and selectively removing the carious tissue, an occlusal stamp was made by applying a flowable resin composite to copy the anatomy of the noncavitated enamel surface. The cavity was restored using a bulk fill resin composite (Opus Bulk Fill, FGM) with 4‐mm‐thick increments. Before curing the last increment, a Teflon band was adapted at the uncured bulk fill composite surface and the occlusal stamp made with the flowable composite was pressed against it to reproduce the natural characteristics and initial occlusal anatomy. The top surface was light‐activated for 40 s. After 4 years, small wear could be seen in the restoration, but still within clinically acceptable levels.Conclusion: The occlusal stamp technique allows reproduction of the natural anatomy of teeth affected by ICDAS 4 carious lesions with good clinical longevity over 4 years.Clinical Significance: This case report presents the use of the stamp technique to restore a tooth affected by an ICDAS 4 lesion, in which a carious process reached the dentin and the enamel anatomy was still preserved. The bulk fill resin composite associated with the occlusal stamp was chosen to quickly restore the cavity with clinical predictability. Bulk fill composites allow the insertion of up to 4‐mm‐thick increments and offer lower shrinkage stress, good clinical longevity and a less time‐consuming procedure in cases of posterior teeth, especially if associated with the stamp technique.
- 26 September 2022
- Published by Wiley in Journal of Esthetic and Restorative Dentistry
- Vol. 35 (3) , 442-448
The stamp technique for direct restoration in a ICDAS 4 carious lesion: A 4‐year follow‐up
Objective: This case report described the use of a stamping technique associated with a bulk fill composite to restore an ICDAS 4 carious lesion on a posterior tooth. The 4‐year follow‐up is also presented.Clinical Considerations: A 32‐year‐old patient presented a carious lesion on tooth 36 with an underlying dark shadow at the dentin seen from the noncavitated enamel occlusal surface, which was compatible with an ICDAS 4 carious lesion. The lesion was radiographically detected and the caries disease was treated with dietary and hygiene habits orientations. Before accessing the lesion and selectively removing the carious tissue, an occlusal stamp was made by applying a flowable resin composite to copy the anatomy of the noncavitated enamel surface. The cavity was restored using a bulk fill resin composite (Opus Bulk Fill, FGM) with 4‐mm‐thick increments. Before curing the last increment, a Teflon band was adapted at the uncured bulk fill composite surface and the occlusal stamp made with the flowable composite was pressed against it to reproduce the natural characteristics and initial occlusal anatomy. The top surface was light‐activated for 40 s. After 4 years, small wear could be seen in the restoration, but still within clinically acceptable levels.Conclusion: The occlusal stamp technique allows reproduction of the natural anatomy of teeth affected by ICDAS 4 carious lesions with good clinical longevity over 4 years.Clinical Significance: This case report presents the use of the stamp technique to restore a tooth affected by an ICDAS 4 lesion, in which a carious process reached the dentin and the enamel anatomy was still preserved. The bulk fill resin composite associated with the occlusal stamp was chosen to quickly restore the cavity with clinical predictability. Bulk fill composites allow the insertion of up to 4‐mm‐thick increments and offer lower shrinkage stress, good clinical longevity and a less time‐consuming procedure in cases of posterior teeth, especially if associated with the stamp technique.
- Open Access
- 8 February 2021
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Brazilian Journal of Oral Sciences
- Vol. 20, e219342
Dentin bond strength evaluation between a conventional and universal adhesive using etch-and-rinse strategy
Aim: The aim of this study was to compare the microtensile bond strength (μTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU – etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of μTBS were analyzed by two-way repeated measures ANOVA and Tukey’s HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - μTBS showed a better performance compared to SU in total-etch mode.
- 8 February 2021
- Published by Instituto de Filosofia e Ciências Humanas - UNICAMP in Brazilian Journal of Oral Sciences
- Vol. 20, e219342
Open AccessDentin bond strength evaluation between a conventional and universal adhesive using etch-and-rinse strategy
Aim: The aim of this study was to compare the microtensile bond strength (μTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU – etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of μTBS were analyzed by two-way repeated measures ANOVA and Tukey’s HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - μTBS showed a better performance compared to SU in total-etch mode.
- 1 December 2020
- Published by Elsevier in Dental Materials
- Vol. 36 (12) , 1544-1556
Effect of the addition of functionalized TiO2 nanotubes and nanoparticles on properties of experimental resin composites
- 1 December 2020
- Published by Elsevier in Dental Materials
- Vol. 36 (12) , 1544-1556
Effect of the addition of functionalized TiO2 nanotubes and nanoparticles on properties of experimental resin composites
- Open Access
- 9 March 2020
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 19, e201674
Color evaluation of white spot lesions treated with resin infiltration after water or grape juice storage
Aim: To evaluate the color stability of bovine enamel with artificial white spot lesions treated with resin infiltration (ICON) or remineralization with fluoride using two storage methods. Methods: Sixty incisors were submitted to artificial white spot lesion induced by demineralization-remineralization (DE-RE) cycling. Initial color was evaluated with CIE-Lab to measure ΔEab. Demineralized teeth were divided according to the treatment of the white spot lesion (n = 20): 1) Remineralization with 2% neutral fluoride gel for 4min (control); 2) ICON application following manufacturer’s recommendations; and 3) ICON with decreased drying time after the application of ethanol. After 24h, color was evaluated and samples were subdivided (n = 10) according to storage: 1) distilled water for 1 month; 2) grape juice for 10min daily. After storage, color was evaluated. L*, a* and b* data were analyzed by one-way ANOVA and ∆Eab data by two-way ANOVA followed by Tukey’s HSD (α = 0.05). Results: L* was affected by juice storage, and decreased when ICON was applied with decreased drying time after the ethanol application. The same behavior occurred with a* (increase with reduced drying time), while b* was not affected. For ∆Eab significant differences were observed between groups (p = 0.0219) and storage methods (p = 0.0007). There was no interaction effect (p = 0.1118). Remineralization with fluoride presented the lowest color changes after storage in water. Conclusion: Treatment of artificial carious lesions with resin infiltration presented greater color changes than fluoride remineralization after storage in both solutions in vitro.
- 9 March 2020
- Published by Universidade Estadual de Campinas in Brazilian Journal of Oral Sciences
- Vol. 19, e201674
Open AccessColor evaluation of white spot lesions treated with resin infiltration after water or grape juice storage
Aim: To evaluate the color stability of bovine enamel with artificial white spot lesions treated with resin infiltration (ICON) or remineralization with fluoride using two storage methods. Methods: Sixty incisors were submitted to artificial white spot lesion induced by demineralization-remineralization (DE-RE) cycling. Initial color was evaluated with CIE-Lab to measure ΔEab. Demineralized teeth were divided according to the treatment of the white spot lesion (n = 20): 1) Remineralization with 2% neutral fluoride gel for 4min (control); 2) ICON application following manufacturer’s recommendations; and 3) ICON with decreased drying time after the application of ethanol. After 24h, color was evaluated and samples were subdivided (n = 10) according to storage: 1) distilled water for 1 month; 2) grape juice for 10min daily. After storage, color was evaluated. L*, a* and b* data were analyzed by one-way ANOVA and ∆Eab data by two-way ANOVA followed by Tukey’s HSD (α = 0.05). Results: L* was affected by juice storage, and decreased when ICON was applied with decreased drying time after the ethanol application. The same behavior occurred with a* (increase with reduced drying time), while b* was not affected. For ∆Eab significant differences were observed between groups (p = 0.0219) and storage methods (p = 0.0007). There was no interaction effect (p = 0.1118). Remineralization with fluoride presented the lowest color changes after storage in water. Conclusion: Treatment of artificial carious lesions with resin infiltration presented greater color changes than fluoride remineralization after storage in both solutions in vitro.
- Open Access
- 13 September 2018
- Published by Fundacao Educacional da Regiao de Joinville - Univille in RSBO
- Vol. 1 (1) , 20-26
Influence of the conditioning technique of a lithium disilicate vitroceramic
Introduction: Lithium disilicate reinforced glass ceramics are materials that require good adhesion to ensure clinical success. Objective: To evaluate the bond strength of resin cements to lithium-disilicateenhanced vitroceramics using different cleaning techniques of recently conditioned ceramics. Material and methods: Twelve ceramic discs (IPS Empress II) were made and inserted into PVC pipes using acrylic resin. The ceramic surface was designed and submitted to a 10% hydrofluoric acid conditioning process for 20s. Then, the specimenswere divided into 3 groups (n = 16) according to the cleaning techniques of recently conditioned ceramics: 1) control - conventional technique (no cleaning after the conditioning process); 2) application of 37% phosphoric acid for 20s; 3) 90% ethyl alcohol bath in a ultrasound tub for 4 min. After cleaning, the silane agent was applied for 1 minute and silicon matrices (1 mm in diameter x 1 mm in height) were made for further application of the resin cement (Vitique, DMG), which was handled according to the manufacturer’s instructions. Four cylinders were prepared on each ceramic surface. The specimens were storedin distilled water for 48 hours and subjected to the micro-shear test in a universal testing machine. After the micro-shear test, a failure analysis of the specimens was performed. Data were submitted to ANOVA (analysis of variance for a criterion) with a significance level of 5%. Results: There was no significant difference between groups (p > 0.05). Conclusion: the cleaning technique of the recently conditioned ceramics does not interfere with the resin/cement bond strength values
- 13 September 2018
- Published by Fundacao Educacional da Regiao de Joinville - Univille in RSBO
- Vol. 1 (1) , 20-26
Open AccessInfluence of the conditioning technique of a lithium disilicate vitroceramic
Introduction: Lithium disilicate reinforced glass ceramics are materials that require good adhesion to ensure clinical success. Objective: To evaluate the bond strength of resin cements to lithium-disilicateenhanced vitroceramics using different cleaning techniques of recently conditioned ceramics. Material and methods: Twelve ceramic discs (IPS Empress II) were made and inserted into PVC pipes using acrylic resin. The ceramic surface was designed and submitted to a 10% hydrofluoric acid conditioning process for 20s. Then, the specimenswere divided into 3 groups (n = 16) according to the cleaning techniques of recently conditioned ceramics: 1) control - conventional technique (no cleaning after the conditioning process); 2) application of 37% phosphoric acid for 20s; 3) 90% ethyl alcohol bath in a ultrasound tub for 4 min. After cleaning, the silane agent was applied for 1 minute and silicon matrices (1 mm in diameter x 1 mm in height) were made for further application of the resin cement (Vitique, DMG), which was handled according to the manufacturer’s instructions. Four cylinders were prepared on each ceramic surface. The specimens were storedin distilled water for 48 hours and subjected to the micro-shear test in a universal testing machine. After the micro-shear test, a failure analysis of the specimens was performed. Data were submitted to ANOVA (analysis of variance for a criterion) with a significance level of 5%. Results: There was no significant difference between groups (p > 0.05). Conclusion: the cleaning technique of the recently conditioned ceramics does not interfere with the resin/cement bond strength values