RLRichard Joseph Licata

Richard Joseph Licata

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Richard Joseph Licata has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    TIE‐GCM ROPE ‐ Dimensionality Reduction: Part I

    by Piyush M. Mehta, Richard J. Licata

    Physics‐based models of the ionosphere‐thermosphere system have been touted as the next big thing in the context of drag modeling and space operations for decades. However, the computational complexity of such models have primarily kept them being used operationally. We recently demonstrated a proof‐of‐concept for developing what we call a reduced order probabilistic emulator (ROPE) for the thermosphere using the thermosphere ionosphere electrodynamics ‐ general circulation model (TIE‐GCM). The methodology uses a page out of dynamical systems theory to first reduce the order of the state using dimensionality reduction and then modeling the temporal dynamics in the reduced state space. The methodology uses an ensemble of temporal dynamic models to provide uncertainty estimates in the prediction. This work focuses on the dimensionality reduction step of the ROPE development process and addresses three limitations of the proof‐of‐concept: (a) extending the altitude upper boundary from 450 km to nearly 1000 km, (b) employing deep learning for nonlinear dimensionality reduction over principal component analysis (PCA) for improved performance during storm periods, and (c) maintaining the spatial resolution of the physical TIE‐GCM model, without down‐sampling, to preserve the spatial scales and variations. Results show overall performance boost over PCA for the high‐resolution and extrapolated data set as well as reduced reconstruction errors during storm‐time conditions. This work represents a major step toward operationalization.


  • Deep Learning Based Nonlinear Dimensionality Reduction for Emulators of Numerical Thermosphere Density Models

    by Richard J. Licata, Piyush M. Mehta

    Modeling and forecasting of atmospheric drag for space objects in low Earth orbit (LEO) is a critical challenge for space situational awareness and environment safety and sustainability. The largest source of dynamics error or uncertainty affecting drag is the thermospheric density. Current operations use empirical models that lack fidelity and are deterministic resulting in unrealistic state and covariance $v_{rel}$ predictions. For more than two decades, numerical physics-based models of thermospheric density have been touted as the next big thing for drag modeling. However, the computational cost combined with the lack of mature algorithms for data assimilation (or $C_{D}$ model-data fusion) has not yet allowed them to make impact in operations. The research community has seen a recent trend towards the development of reduced order models or emulators to overcome these limitations for enabling operational deployment of numerical density models. Dimensionality reduction is an important first step in this process. We build upon previous work in the community to design a nonlinear dimensionality reduction approach based in a deep convolutional autoencoder (CAE). We develop a new architecture that employs an attention module, spatial loss scaling, and weighted sampling to optimize performance and overcome data imbalance. We also employ an orthogonality constraint for enabling robust data assimilation as the next step. Results show that we achieve performance similar in terms of reconstruction error (−2%) to that of the robust but linear principal component analysis (PCA) approach while significantly improving performance during nonlinear periods of geomagnetic storms.

  • Open Access

    Reduced Order Probabilistic Emulation for Physics‐Based Thermosphere Models

    by Richard J. Licata, Piyush M. Mehta

    The geospace environment is volatile and highly driven. Space weather has effects on Earth's magnetosphere that cause a dynamic and enigmatic response in the thermosphere, particularly on the evolution of neutral mass density. Many models exist that use space weather drivers to produce a density response, but these models are typically computationally expensive or inaccurate for certain space weather conditions. In response, this work aims to employ a probabilistic machine learning (ML) method to create an efficient surrogate for the Thermosphere Ionosphere Electrodynamics General Circulation Model (TIE‐GCM), a physics‐based thermosphere model. Our method leverages principal component analysis to reduce the dimensionality of TIE‐GCM and recurrent neural networks to model the dynamic behavior of the thermosphere much quicker than the numerical model. The newly developed reduced order probabilistic emulator (ROPE) uses Long‐Short Term Memory neural networks to perform time‐series forecasting in the reduced state and provide distributions for future density. We show that across the available data, TIE‐GCM ROPE has similar error to previous linear approaches while improving storm‐time modeling. We also conduct a satellite propagation study for the significant November 2003 storm which shows that TIE‐GCM ROPE can capture the position resulting from TIE‐GCM density with <5 km bias. Simultaneously, linear approaches provide point estimates that can result in biases of 7–18 km.


  • Open Access

    Global Variations in the Time Delays Between Polar Ionospheric Heating and the Neutral Density Response

    by Daniel R. Weimer, Piyush M. Mehta, R. J. Licata, W. K. Tobiska

    We present results from a study of the time lags between changes in the energy flow into the polar regions and the response of the thermosphere to the heating. Measurements of the neutral density from the Challenging Mini‐satellite Payload (CHAMP) and Gravity Recovery and Climate Experiment (GRACE) missions are used, along with calculations of the total Poynting flux entering the poles. During two major geomagnetic storms in 2003, these data show increased densities are first seen on the dayside edge of the auroral ovals after a surge in the energy input. At lower latitudes, the densities reach their peak values on the dayside earlier than on the night side. A puzzling response seen in the CHAMP measurements during the November 2003 storm was that the density at a fixed location near the “Harang discontinuity” remained at unusually low levels during three sequential orbit passes, while elsewhere the density increased. The entire database of measurements from the CHAMP and GRACE missions were used to derive maps of the density time lags across the globe. The maps show a large gradient between short and long time delays between 60° and 30° geographic latitude. They confirm the findings from the two storm periods, that near the equator, the density on the dayside responds earlier than on the nightside. The time lags are longest near 18–20 hr local time. The time lag maps could be applied to improve the accuracy of empirical thermosphere models, and developers of numerical models may find these results useful for comparisons with their calculations.


  • Open Access

    Global Variations in the Time Delays Between Polar Ionospheric Heating and the Neutral Density Response

    by Daniel R Weimer, Piyush M Mehta, Richard J Licata, W. Kent Tobiska

    We present results from a study of the time lags between changes in the energy flow into the polar regions and the response of the thermosphere to the heating. Measurements of the neutral density from the CHAMP and GRACE missions are used, along with calculations of the total Poynting flux entering the poles. During two major geomagnetic storms in 2003 these data show increased densities are first seen on the dayside edge of the auroral ovals after a surge in the energy input. At lower latitudes the densities reach their peak values on the dayside earlier than on the night side. A puzzling response seen in the CHAMP measurements during the November 2003 storm was that the density at a fixed location near the “Harang discontinuity’ remained at unusually low levels during three sequential orbit passes, while elsewhere the density increased. The entire database of measurements from the CHAMP and GRACE missions were used to derive maps of the density time lags across the globe. The maps show a large gradient between short and long time delays between $60^{\circ}$ and $30^{\circ}$ geographic latitude. They confirm the findings from the two storm periods, that near the equator the density on the dayside responds earlier than on the nightside. The time lags are longest near 18 – 20 h local time. The time lag maps could be applied to improve the accuracy of empirical thermosphere models, and developers of numerical models may find these results useful for comparisons with their calculations.

  • Open Access

    Reduced Order Probabilistic Emulation for Physics-Based Thermosphere Models

    by Richard J. Licata, Piyush M. Mehta

    The geospace environment is volatile and highly driven. Space weather has effects on Earth's magnetosphere that cause a dynamic and enigmatic response in the thermosphere, particularly on the evolution of neutral mass density. Many models exist that use space weather drivers to produce a density response, but these models are typically computationally expensive or inaccurate for certain space weather conditions. In response, this work aims to employ a probabilistic machine learning (ML) method to create an efficient surrogate for the Thermosphere Ionosphere Electrodynamics General Circulation Model (TIE-GCM), a physics-based thermosphere model. Our method leverages principal component analysis to reduce the dimensionality of TIE-GCM and recurrent neural networks to model the dynamic behavior of the thermosphere much quicker than the numerical model. The newly developed reduced order probabilistic emulator (ROPE) uses Long-Short Term Memory neural networks to perform time-series forecasting in the reduced state and provide distributions for future density. We show that across the available data, TIE-GCM ROPE has similar error to previous linear approaches while improving storm-time modeling. We also conduct a satellite propagation study for the significant November 2003 storm which shows that TIE-GCM ROPE can capture the position resulting from TIE-GCM density with < 5 km bias. Simultaneously, linear approaches provide point estimates that can result in biases of 7 - 18 km.

  • Open Access

    MSIS‐UQ: Calibrated and Enhanced NRLMSIS 2.0 Model With Uncertainty Quantification

    by Richard J. Licata, Piyush M. Mehta, Daniel R. Weimer, W. Kent Tobiska, Jean Yoshii

    The Mass Spectrometer and Incoherent Scatter radar (MSIS) model family has been developed and improved since the early 1970's. The most recent version of MSIS is the Naval Research Laboratory (NRL) MSIS 2.0 empirical atmospheric model. NRLMSIS 2.0 provides species density, mass density, and temperature estimates as function of location and space weather conditions. MSIS models have long been a popular choice of thermosphere model in the research and operations community alike, but—like many models—does not provide uncertainty estimates. In this work, we develop an exospheric temperature model based in machine learning that can be used with NRLMSIS 2.0 to calibrate it relative to high‐fidelity satellite density estimates directly through the exospheric temperature parameter. Instead of providing point estimates, our model (called MSIS‐UQ) outputs a distribution which is assessed using a metric called the calibration error score. We show that MSIS‐UQ debiases NRLMSIS 2.0 resulting in reduced differences between model and satellite density of 25% and is 11% closer to satellite density than the Space Force's High Accuracy Satellite Drag Model. We also show the model's uncertainty estimation capabilities by generating altitude profiles for species density, mass density, and temperature. This explicitly demonstrates how exospheric temperature probabilities affect density and temperature profiles within NRLMSIS 2.0. Another study displays improved post‐storm overcooling capabilities relative to NRLMSIS 2.0 alone, enhancing the phenomena that it can capture.


  • Open Access

    Stochastic modeling of physical drag coefficient -- its impact on orbit prediction and space traffic management

    by Smriti Nandan Paul, Phillip Logan Sheridan, Richard J. Licata, Piyush M. Mehta

    Ambitious satellite constellation projects by commercial entities and the ease of access to space in recent times have led to a dramatic proliferation of low-Earth space traffic. It jeopardizes space safety and long-term sustainability, necessitating better space traffic management (STM). Correct modeling of uncertainties in force models and orbital states, among other things, is an essential part of STM. For objects in the low-Earth orbit (LEO) region, the uncertainty in the orbital dynamics mainly emanate from limited knowledge of the atmospheric drag-related parameters and variables. In this paper, which extends the work by Paul et al. [2021], we develop a feed-forward deep neural network model for the prediction of the satellite drag coefficient for the full range of satellite attitude (i.e., satellite pitch $\in$ ($-90^0$, $+90^0$) and satellite yaw $\in$ ($0^0$, $+360^0$)). The model simultaneously predicts the mean and the standard deviation and is well-calibrated. We use numerically simulated physical drag coefficient data for training our neural network. The numerical simulations are carried out using the test particle Monte Carlo method using the diffuse reflection with incomplete accommodation gas-surface interaction model. Modeling is carried out for the well-known CHAllenging Minisatellite Payload (CHAMP) satellite. Finally, we use the Monte Carlo approach to propagate CHAMP over a three-day period under various modeling scenarios to investigate the distribution of radial, in-track, and cross-track orbital errors caused by drag coefficient uncertainty.

  • Open Access

    Science Through Machine Learning: Quantification of Post‐Storm Thermospheric Cooling

    by Richard J. Licata, Piyush M. Mehta, Daniel R. Weimer, Douglas P. Drob, W. Kent Tobiska, Jean Yoshii

    Machine learning (ML) models are universal function approximators and—if used correctly—can summarize the information content of observational data sets in a functional form for scientific and engineering applications. A benefit to ML over parametric models is that there are no a priori assumptions about particular basis functions which can potentially limit the phenomena that can be modeled. In this work, we develop ML models on three data sets: the Space Environment Technologies High Accuracy Satellite Drag Model (HASDM) density database, a spatiotemporally matched data set of outputs from the Jacchia‐Bowman 2008 Empirical Thermospheric Density Model (JB2008), and an accelerometer‐derived density data set from CHAllenging Minisatellite Payload (CHAMP). These ML models are compared to the Naval Research Laboratory Mass Spectrometer and Incoherent Scatter radar (NRLMSIS 2.0) model to study the presence of post‐storm cooling in the middle‐thermosphere. We find that both NRLMSIS 2.0 and JB2008‐ML do not account for post‐storm cooling and consequently perform poorly in periods following strong geomagnetic storms (e.g., the 2003 Halloween storms). Conversely, HASDM‐ML and CHAMP‐ML do show evidence of post‐storm cooling indicating that this phenomenon is present in the original data sets. Results show that density reductions up to 40% can occur 1–3 days post‐storm depending on the location and strength of the storm.


  • Open Access

    Uncertainty quantification techniques for data-driven space weather modeling: thermospheric density application

    by Richard J. Licata, Piyush M. Mehta

    Machine learning (ML) has been applied to space weather problems with increasing frequency in recent years, driven by an influx of in-situ measurements and a desire to improve modeling and forecasting capabilities throughout the field. Space weather originates from solar perturbations and is comprised of the resulting complex variations they cause within the numerous systems between the Sun and Earth. These systems are often tightly coupled and not well understood. This creates a need for skillful models with knowledge about the confidence of their predictions. One example of such a dynamical system highly impacted by space weather is the thermosphere, the neutral region of Earth’s upper atmosphere. Our inability to forecast it has severe repercussions in the context of satellite drag and computation of probability of collision between two space objects in low Earth orbit (LEO) for decision making in space operations. Even with (assumed) perfect forecast of model drivers, our incomplete knowledge of the system results in often inaccurate thermospheric neutral mass density predictions. Continuing efforts are being made to improve model accuracy, but density models rarely provide estimates of confidence in predictions. In this work, we propose two techniques to develop nonlinear ML regression models to predict thermospheric density while providing robust and reliable uncertainty estimates: Monte Carlo (MC) dropout and direct prediction of the probability distribution, both using the negative logarithm of predictive density (NLPD) loss function. We show the performance capabilities for models trained on both local and global datasets. We show that the NLPD loss provides similar results for both techniques but the direct probability distribution prediction method has a much lower computational cost. For the global model regressed on the Space Environment Technologies High Accuracy Satellite Drag Model (HASDM) density database, we achieve errors of approximately 11% on independent test data with well-calibrated uncertainty estimates. Using an in-situ CHAllenging Minisatellite Payload (CHAMP) density dataset, models developed using both techniques provide test error on the order of 13%. The CHAMP models—on validation and test data—are within 2% of perfect calibration for the twenty prediction intervals tested. We show that this model can also be used to obtain global density predictions with uncertainties at a given epoch.