CSChen Shi

Chen Shi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chen Shi has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Novel Bidirectional Output Ytterbium-Doped High Power Fiber Lasers: From Continuous to Quasi-Continuous

    by Lingfa Zeng, Xinyi Ding, Jiaqi Liu, Xiaolin Wang, Yun Ye, Hanshuo Wu, Peng Wang, Xiaoming Xi, Hanwei Zhang, Chen Shi, et al.

    Traditional ytterbium-doped high-power fiber lasers generally use a unidirectional output structure. To reduce the cost and improve the efficiency of the fiber laser, we propose a bidirectional output fiber laser (BOFL). The BOFL has many advantages over that of the traditional unidirectional output fiber laser (UOFL) and has a wide application in the industrial field. In theory, the model of the BOFL is established, and a comparison of the nonlinear effect in the traditional UOFL and the BOFL is studied. Experimentally, high-power continuous wave (CW) and quasi-continuous wave (QCW) BOFLs are demonstrated. In the continuous laser, we first combine the BOFL with the oscillating amplifying integrated structure, and a near-single-mode bidirectional 2 × 4 kW output with a total power of above 8 kW is demonstrated. Then, with the simple BOFL, a CW bidirectional 2 × 5 kW output with a total power of above 10 kW is demonstrated. By means of pump source modulation, a QCW BOFL is developed, and the output of a near-single mode QCW laser with a peak output of 2 × 4.5 kW with a total peak power of more than 9 kW is realized. Both CW and QCW output BOFL are the highest powers reported at present.


  • Open Access

    Temperature Dependence of Spectral Properties of Yb-Doped Superfluorescent Fiber Source

    by Jinming Wu, Fengchang Li, Peng Wang, Hanwei Zhang, Hanshuo Wu, Xiaoming Xi, Chen Shi, Baolai Yang, Xiaolin Wang, Kai Han, et al.

    Fiber laser has been developed to the point where the average power scaling can reach several kilowatts readily for oscillators and more for amplifiers. In the meanwhile, the thermal effects inside the fiber laser also become prominent. Temperature rise of the fiber core caused by thermal effects has a conspicuous impact on laser performance. In this paper, the spectral properties of superfluorescent fiber sources at low temperature have been studied experimentally and theoretically. We observe a significant flattening of the arc top of the spectra and a broadening to the short-wave direction as the gain fiber temperature decreases from 25 °C to -95 °C. The corresponding 10 dB bandwidth and 20 dB bandwidth increased by 7.216 and 4.004 nm, respectively. The 10 dB center position and the 20 dB center position of the spectrum also move 6.1 nm and 4.2 nm towards short-wave direction, respectively. The absorption and emission cross-sections at different temperatures, calculated based on Lorenz fitting theory, are used to simulate the experimental phenomena, and the results are consistent with the experiment. Additionally, the small signal gain coefficient at low temperature is calculated to help explain the observed phenomena in the experiment.


  • Open Access

    Demonstration of 3 kW-Level Nearly Single Mode Monolithic Fiber Amplifier Emitting at 1050 Nm Employing Tapered Yb-Doped Fiber

    by Xiangming Meng, Yun Ye, Baolai Yang, Xiaoming Xi, Peng Wang, Chen Shi, Zhiyong Pan, Liangjin Huang, Hanwei Zhang, Xiaolin Wang

    Tapered Yb-doped fiber (T-YDF) can balance the suppression of transverse mode instability (TMI) and stimulated Raman scattering (SRS) in high power fiber lasers. In this work, we have constructed an all-fiberized master oscillator power amplifier emitting at the central wavelength of 1050 nm based on a T-YDF and investigated the laser performance in respective co-pumped and counter-pumped configurations. The results show that the T-YDF can effectively mitigate SRS effect in short-wavelength fiber lasers. A nearly single mode beam quality (M2∼1.20) is obtained at output power of 3 kW-level. In particular, the SRS suppression ratio in the co-pump and counter-pump scheme is about ∼33.2 dB at ∼3039 W and ∼46.6 dB at ∼2818 W, respectively. By further optimizing the structure of the tapered active fiber, it is promising to further improve the output power and beam quality in short-wavelength fiber lasers.


  • Open Access

    Optimization and Demonstration of Direct LD Pumped High-Power Fiber Lasers to Balance SRS and TMI Effects

    by Lingfa Zeng, Xiaolin Wang, Li Wang, Yun Ye, Peng Wang, Baolai Yang, Xiaoming Xi, Zhiyong Pan, Hanwei Zhang, Chen Shi, et al.

    Up to now, transverse mode instability (TMI) and stimulated Raman scattering (SRS) have become the main factors limiting the power scaling of conventional ytterbium-doped fiber laser. Many technologies are proposed to suppress the SRS or TMI individually, but most of them are contradictions in practical application. In this article, we focus on the technologies that can balance the suppression of both SRS and TMI, including fiber coiling optimization, pump wavelength optimization, pump configuration optimization, and novel vary core diameter active fiber. Firstly, we validate the effectiveness of these technologies in both theoretical and relatively low-power experiments, and introduce the abnormal TMI threshold increasing in a few-mode fiber amplifier with fiber coiling. Then, we scale up the power through various types of fiber lasers, including wide linewidth and narrow linewidth fiber lasers, as well as quasi-continuous wave (QCW) fiber lasers. As a result, we achieve 5~8 kW fiber laser oscillators, 10~20 kW wide linewidth fiber laser amplifiers, 4 kW narrow linewidth fiber amplifiers, and 10 kW peak power QCW fiber oscillators. The demonstration of these new technical schemes is of great significance for the development of high-power fiber lasers.


  • Open Access

    High Power Ytterbium-Doped Fiber Lasers Employing Longitudinal Vary Core Diameter Active Fibers

    by Lingfa Zeng, Xiaolin Wang, Yun Ye, Li Wang, Baolai Yang, Xiaoming Xi, Peng Wang, Zhiyong Pan, Hanwei Zhang, Chen Shi, et al.

    Thanks to the advantage of balancing nonlinear effects and transverse mode instability, vary core diameter active fiber (VCAF) has been widely used in high power ytterbium-doped fiber lasers in recent years. Up to now, VCAF has developed from the basic form of the original tapered fiber to the spindle-shaped and saddle-shaped fiber with different characteristics and has been applied in conventional fiber lasers, oscillating–amplifying integrated fiber lasers, and quasi-continuous wave fiber lasers and successfully improved the performance of these lasers. In the present study, a 6110 W fiber laser amplifier is realized based on a tapered fiber. The maximum output power of a fiber laser amplifier based on spindle-shaped fibers is 6020 W with a beam quality of M2~1.86. In this paper, we first introduce the basic concept of VCAF and summarize its main fabrication methods and advantages in high-power fiber laser applications. Then, we will present the recent research results of high-power fiber laser employing VCAF in our group and clarify the outstanding advantages of VCAF compared with the constant core diameter active fiber (CCAF).


  • Open Access

    A Novel Bidirectional Output Oscillating-Amplifying Integrated Fiber Laser With 2 Ports × 2 kW Level Near-Single-Mode Output

    by Jiaqi Liu, Lingfa Zeng, Peng Wang, Baolai Yang, Xiaoming Xi, Chen Shi, Hanwei Zhang, Xiaolin Wang, Fengjie Xi

    A novel bidirectional output oscillating-amplifying integrated fiber laser which combines the advantages of the bidirectional output fiber laser oscillator and the oscillating-amplifying integrated fiber laser is proposed and demonstrated experimentally. The influences of the reflectivities and center wavelengths of FBGs on the laser output power and efficiency were studied theoretically. The characteristics of the output laser were studied in detail in experiment. Based on this structure, we finally demonstrated a bidirectional laser output of 2×2-kW level with an active fiber length of 6 m for the oscillating section and 7m for the amplifying section at both ends. The optical-to-optical conversion efficiency is 80.4%. The beam qualities of both ends are $M^{2}_{A} \sim 1.3$ and $M^{2}_{B} \sim 1.4$ , which indicates a near-single-mode output. To the best of our knowledge, it was the first time that this structure has been proposed, and its feasibility was demonstrated experimentally.


  • Open Access

    Experimental Study on Transverse Mode Instability Characteristics of Few-Mode Fiber Laser Amplifier Under Different Bending Conditions

    by Yujun Wen, Peng Wang, Chen Shi, Baolai Yang, Xiaoming Xi, Hanwei Zhang, Xiaolin Wang

    We studied the transverse mode instability (TMI) characteristics of few-mode fiber laser amplifier employing ytterbium-doped fiber (YDF) with core/cladding diameter of 30/400 μm under different bending diameters. The gain fiber is coiled in ellipse shape with minimum bending diameter changed from 9 cm, 10 cm, 11 cm to 12 cm in the bending part, and the experimental results show an anomaly characteristic of TMI. The TMI threshold improved from 772 W, 1149 W and 1458 W to 1641 W when the bending diameter of YDF increase from 9 cm, 10 cm, 11 cm to 12 cm, accompanied by the deterioration of beam quality from 1.60, 1.67, 1.87 to 1.95. This is mainly because tightly bending in few-mode fiber will promote the overlap between modes and lead to mode coupling, which may trigger TMI. Besides, the bending losses of HOMs decrease while bending diameter increasing, so that there is higher output efficiency and deteriorated beam quality when bending diameter increase. Although the phenomenon is not agreed with common TMI with near single-mode fiber laser, the result will be helpful for the design and power scaling of few-mode fiber lasers.


  • Theoretical study on stimulated Raman scattering and mode evolution characteristics in spindle-shaped Ytterbium-doped fiber laser

    by Lingfa Zeng, Chen Shi, Xiaoming Xi, Hanwei Zhang, Peng Wang, Baolai Yang, Xiaolin Wang, Xiaojun Xu

    The spindle-shaped fiber is a novel fiber with a gradual longitudinal structure. The small size section and large size section have the advantages of controlling the number of modes and reducing the laser power density respectively. Based on the steady-state rate equations and coupled mode theory of fiber lasers, this paper conducts theoretical research and comparative analysis on SRS and mode evolution in fiber lasers based on conventional fibers and spindle-shaped fibers, respectively. The results show that, compared with conventional fibers with the similar core diameter, the spindle-shaped fiber can effectively balance the mitigation of SRS and TMI in fiber lasers, and has great potential for achieving higher power laser with better beam quality.


  • Open Access

    Experimental Demonstration of the Influence of Cooling Temperature on the Thermal Mode Instability in the YB-Doped Fiber Oscillator

    by Jinming Wu, Qiong Gao, Hanwei Zhang, Peng Wang, Xiaolin Wang, Baolai Yang, Chen Shi, Xiaoming Xi, Pu Zhou, Shaojun Du

    Mode instability (MI) has become a major factor that restricts the brightness enhancement of fiber laser. This paper studies the MI threshold characteristics of the fiber oscillators with refrigerated ytterbium-doped fiber (YDF). In the experiments, two fiber lasers that can operate at low temperature were built. We rigorously tested the MI threshold of the lasers with the YDF placed in two different environments. At room temperature environment, the MI threshold of the oscillator was measured with the temperature of the YDF water cooling plate ranging from 25 to 5 . When the cooling temperature of the YDF drops from 20 to 5, the MI threshold of the laser rises gradually, but the increase is small. In another experiment, the YDF is assembled in a constant temperature test chamber, in which the cooling of the YDF is more efficient. It is found that as the cooling temperature drops, the MI threshold of the laser has an obvious upward trend. In the process of the cooling temperature of the YDF dropped from 20 to -10, the MI threshold of the laser was increased from 867 W to above 931 W, an increase of nearly 10%. It is the first detailedly experimental demonstration that decreasing the cooling temperature of the gain fiber can indeed increase the MI threshold of the fiber oscillator. This work can clarify the influence of cooling temperature on the laser thermal effect, which is conducive to perfecting the theoretical model of the MI effect.