Sajjad Naeimipour
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sajjad Naeimipour has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Aili
Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Department of Physics, Chemistry and Biology, Linköping University, SE-581 83, Linköping, Sweden
9 shared publications - Fatemeh Rasti Boroojeni
Laboratory of Molecular Materials Division of Biophysics and Bioengineering Department of Physics, Chemistry and Biology Linköping University Linköping 581 83 Sweden
5 shared publications - Philip Lifwergren
Laboratory of Molecular Materials Division of Biophysics and Bioengineering Department of Physics, Chemistry, and Biology Linköping University Linköping 583 81 Sweden
5 shared publications - Robert Selegård
Laboratory of Molecular Materials, Division of Biophysics and Bioengineering, Linköping University, 581 83 Linköping, Sweden
5 shared publications - Annelie Abrahamsson
Department of Oncology and Department of Biomedical and Clinical Sciences, Linköping University, Linköping, Sweden
3 shared publications - Charlotta Dabrosin
Department of Biomedical and Clinical Sciences, Linkoping University
3 shared publications
Latest Publications
- Open Access
An Innervated and Vascularized HNSCC-on-a-Chip Model Built on Defined and Tunable Engineered Extracellular Matrices
Understanding the tumor microenvironment (TME) requires experimental platforms that faithfully recapitulate its key components. Here, we present an innervated and vascularized head and neck squamous cell carcinoma (HNSCC)-on-a-chip platform built with fully defined and tunable engineered extracellular matrices (eECMs). In a stepwise increase of complexity, we first co-cultured patient-derived HNSCC cells, cancer-associated fibroblasts, and endothelial cells within tailored eECMs, revealing matrix-dependent differences in self-organization and chemotherapeutic sensitivity. We then integrated these 3D constructs into a cancer–vasculature-interface, which enabled analysis of eECM-dependent directional collective migration and metastatization. Finally, we incorporated HNSCC-specific innervation through injectable 3D human bioengineered trigeminal ganglia, establishing a chip-based innervation–tumor–vasculature tri-interface. Together, this all-human platform captures fundamental determinants of HNSCC progression, including a fully defined ECM, vasculature, and innervation, within a single modular system that is broadly adaptable for interrogating how the tumor microenvironment shapes solid tumor behavior and therapeutic responses. Teaser: HNSCC-on-a-chip integrates defined ECM, vasculature, and innervation to investigate tumor behavior and therapeutic responses.
Open AccessAn Innervated and Vascularized HNSCC-on-a-Chip Model Built on Defined and Tunable Engineered Extracellular Matrices
Understanding the tumor microenvironment (TME) requires experimental platforms that faithfully recapitulate its key components. Here, we present an innervated and vascularized head and neck squamous cell carcinoma (HNSCC)-on-a-chip platform built with fully defined and tunable engineered extracellular matrices (eECMs). In a stepwise increase of complexity, we first co-cultured patient-derived HNSCC cells, cancer-associated fibroblasts, and endothelial cells within tailored eECMs, revealing matrix-dependent differences in self-organization and chemotherapeutic sensitivity. We then integrated these 3D constructs into a cancer–vasculature-interface, which enabled analysis of eECM-dependent directional collective migration and metastatization. Finally, we incorporated HNSCC-specific innervation through injectable 3D human bioengineered trigeminal ganglia, establishing a chip-based innervation–tumor–vasculature tri-interface. Together, this all-human platform captures fundamental determinants of HNSCC progression, including a fully defined ECM, vasculature, and innervation, within a single modular system that is broadly adaptable for interrogating how the tumor microenvironment shapes solid tumor behavior and therapeutic responses. Teaser: HNSCC-on-a-chip integrates defined ECM, vasculature, and innervation to investigate tumor behavior and therapeutic responses.
- Open Access
- 20 June 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (22) , e2502262
Printing and Rerouting of Elastic and Protease Responsive Shape Memory Hydrogel Filaments
The fabrication of mechanically robust and reconfigurable hydrogel filaments remains a major challenge in biofabrication of perfusable architectures, dynamic tissue models, and complex 3D cell‐laden constructs. Conventional extrusion‐based bioprinting techniques generate filaments that are soft and fragile, limiting post‐processing, scalability, and functional adaptability. Rerouting of Free‐Floating Suspended Hydrogel Filaments (REFRESH) is introduced as a biofabrication strategy that integrates an aqueous two‐phase system (ATPS)‐compatible elastic extracellular matrix mimicking bioink material with a flexible printing and post‐processing approach to overcome these constraints. This method enables the formation of highly elastic hydrogel filaments cross‐linked via strain‐promoted azide‐alkyne cycloaddition (SPAAC) of bicyclo[6.1.0]non‐4‐yne‐functionalized hyaluronan, exhibiting a strain at break exceeding 100%. The printed filaments maintain mechanical integrity during manual handling and post‐processing using textile‐inspired techniques, such as knotting and braiding, into reconfigurable 3D architectures. A distinct shape memory function enables programmed mechanical actuation and recovery of deformed structures. The hydrogel system supports high cell viability across multiple cell types and enables the fabrication of multicellular constructs with spatially defined organization. By incorporating protease‐degradable cross‐linkers, REFRESH‐generated filaments function as sacrificial templates for perfusable tubular structures. This approach significantly expands the biofabrication design space, offering new possibilities for engineering vascularized tissues and complex hydrogel‐based architectures.
- 20 June 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (22) , e2502262
Open AccessPrinting and Rerouting of Elastic and Protease Responsive Shape Memory Hydrogel Filaments
The fabrication of mechanically robust and reconfigurable hydrogel filaments remains a major challenge in biofabrication of perfusable architectures, dynamic tissue models, and complex 3D cell‐laden constructs. Conventional extrusion‐based bioprinting techniques generate filaments that are soft and fragile, limiting post‐processing, scalability, and functional adaptability. Rerouting of Free‐Floating Suspended Hydrogel Filaments (REFRESH) is introduced as a biofabrication strategy that integrates an aqueous two‐phase system (ATPS)‐compatible elastic extracellular matrix mimicking bioink material with a flexible printing and post‐processing approach to overcome these constraints. This method enables the formation of highly elastic hydrogel filaments cross‐linked via strain‐promoted azide‐alkyne cycloaddition (SPAAC) of bicyclo[6.1.0]non‐4‐yne‐functionalized hyaluronan, exhibiting a strain at break exceeding 100%. The printed filaments maintain mechanical integrity during manual handling and post‐processing using textile‐inspired techniques, such as knotting and braiding, into reconfigurable 3D architectures. A distinct shape memory function enables programmed mechanical actuation and recovery of deformed structures. The hydrogel system supports high cell viability across multiple cell types and enables the fabrication of multicellular constructs with spatially defined organization. By incorporating protease‐degradable cross‐linkers, REFRESH‐generated filaments function as sacrificial templates for perfusable tubular structures. This approach significantly expands the biofabrication design space, offering new possibilities for engineering vascularized tissues and complex hydrogel‐based architectures.
- Open Access
- 12 June 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (21) , e2501430
Biphasic Granular Bioinks for Biofabrication of High Cell Density Constructs for Dermal Regeneration
Chronic wounds and severe skin injuries pose significant clinical challenges, as existing treatments like cultured epidermal autografts and tissue engineering strategies fail to regenerate functional dermal tissue effectively. These methods often result in scarring due to poor tissue integration, low cell density, and limited extracellular matrix (ECM) production. Conventional skin tissue engineering relies on time‐intensive cell expansion, producing constructs that lack the complexity of native dermal structures. Here, a bioprintable biphasic granular hydrogel bioink (µInk) based on cell‐laden porous gelatin microcarriers (PGMs) is presented, enabling fabrication of ultra‐high cell density constructs that promote ECM production for dermal regeneration in vitro and in vivo. Primary human dermal fibroblasts are cultured and expanded on PGMs in a bioreactor prior µInk formulation. The cell‐laden PGMs are cross‐linked via copper‐free click chemistry, creating a shear‐thinning granular bioink. The µInk is 3D bioprinted into structurally stable constructs with high cell viability. In vivo, the bioprinted constructs supported neovascularization, hydrogel remodeling, and tissue integration over 28 days. Cells maintained their tissue‐specific phenotype, proliferated, and produced dermal ECM post‐transplantation. The µInk offers a promising approach to generating high cell‐density constructs for scar‐free wound healing and for advancing complex tissue reconstruction.
- 12 June 2025
- Published by Wiley in Advanced Healthcare Materials
- Vol. 14 (21) , e2501430
Open AccessBiphasic Granular Bioinks for Biofabrication of High Cell Density Constructs for Dermal Regeneration
Chronic wounds and severe skin injuries pose significant clinical challenges, as existing treatments like cultured epidermal autografts and tissue engineering strategies fail to regenerate functional dermal tissue effectively. These methods often result in scarring due to poor tissue integration, low cell density, and limited extracellular matrix (ECM) production. Conventional skin tissue engineering relies on time‐intensive cell expansion, producing constructs that lack the complexity of native dermal structures. Here, a bioprintable biphasic granular hydrogel bioink (µInk) based on cell‐laden porous gelatin microcarriers (PGMs) is presented, enabling fabrication of ultra‐high cell density constructs that promote ECM production for dermal regeneration in vitro and in vivo. Primary human dermal fibroblasts are cultured and expanded on PGMs in a bioreactor prior µInk formulation. The cell‐laden PGMs are cross‐linked via copper‐free click chemistry, creating a shear‐thinning granular bioink. The µInk is 3D bioprinted into structurally stable constructs with high cell viability. In vivo, the bioprinted constructs supported neovascularization, hydrogel remodeling, and tissue integration over 28 days. Cells maintained their tissue‐specific phenotype, proliferated, and produced dermal ECM post‐transplantation. The µInk offers a promising approach to generating high cell‐density constructs for scar‐free wound healing and for advancing complex tissue reconstruction.
- Open Access
- 1 September 2024
- Published by Wiley in Small Science
- Vol. 4 (11) , 2400290
Engineering Conductive Hydrogels with Tissue‐like Properties: A 3D Bioprinting and Enzymatic Polymerization Approach
Hydrogels are promising materials for medical devices interfacing with neural tissues due to their similar mechanical properties. Traditional hydrogel‐based bio‐interfaces lack sufficient electrical conductivity, relying on low ionic conductivity, which limits signal transduction distance. Conducting polymer hydrogels offer enhanced ionic and electronic conductivities and biocompatibility but often face challenges in processability and require aggressive polymerization methods. Herein, we demonstrate in situ enzymatic polymerization of π‐conjugated monomers in a hyaluronan (HA)‐based hydrogel bioink to create cell‐compatible, electrically conductive hydrogel structures. These structures were fabricated using 3D bioprinting of HA‐based bioinks loaded with conjugated monomers, followed by enzymatic polymerization via horseradish peroxidase. This process increased the hydrogels’ stiffness from about 0.6 to 1.5 kPa and modified their electroactivity. The components and polymerization process were well‐tolerated by human primary dermal fibroblasts and PC12 cells. This work presents a novel method to fabricate cytocompatible and conductive hydrogels suitable for bioprinting. These hybrid materials combine tissue‐like mechanical properties with mixed ionic and electronic conductivity, providing new ways to use electricity to influence cell behavior in a native‐like microenvironment.
- 1 September 2024
- Published by Wiley in Small Science
- Vol. 4 (11) , 2400290
Open AccessEngineering Conductive Hydrogels with Tissue‐like Properties: A 3D Bioprinting and Enzymatic Polymerization Approach
Hydrogels are promising materials for medical devices interfacing with neural tissues due to their similar mechanical properties. Traditional hydrogel‐based bio‐interfaces lack sufficient electrical conductivity, relying on low ionic conductivity, which limits signal transduction distance. Conducting polymer hydrogels offer enhanced ionic and electronic conductivities and biocompatibility but often face challenges in processability and require aggressive polymerization methods. Herein, we demonstrate in situ enzymatic polymerization of π‐conjugated monomers in a hyaluronan (HA)‐based hydrogel bioink to create cell‐compatible, electrically conductive hydrogel structures. These structures were fabricated using 3D bioprinting of HA‐based bioinks loaded with conjugated monomers, followed by enzymatic polymerization via horseradish peroxidase. This process increased the hydrogels’ stiffness from about 0.6 to 1.5 kPa and modified their electroactivity. The components and polymerization process were well‐tolerated by human primary dermal fibroblasts and PC12 cells. This work presents a novel method to fabricate cytocompatible and conductive hydrogels suitable for bioprinting. These hybrid materials combine tissue‐like mechanical properties with mixed ionic and electronic conductivity, providing new ways to use electricity to influence cell behavior in a native‐like microenvironment.
- Open Access
- 19 February 2024
- Published by Elsevier in Acta Biomaterialia
- Vol. 178, 160-169
Increased matrix stiffness enhances pro-tumorigenic traits in a physiologically relevant breast tissue- monocyte 3D model
- 19 February 2024
- Published by Elsevier in Acta Biomaterialia
- Vol. 178, 160-169
Open AccessIncreased matrix stiffness enhances pro-tumorigenic traits in a physiologically relevant breast tissue- monocyte 3D model
- Open Access
- 12 January 2024
- Published by IOP Publishing in Biofabrication
- Vol. 16 (2) , 025002
Proteolytic remodeling of 3D bioprinted tumor microenvironments
In native tissue, remodeling of the pericellular space is essential for cellular activities and is mediated by tightly regulated proteases. Protease activity is dysregulated in many diseases, including many forms of cancer. Increased proteolytic activity is directly linked to tumor invasion into stroma, metastasis, and angiogenesis as well as all other hallmarks of cancer. Here we show a strategy for 3D bioprinting of breast cancer models using well-defined protease degradable hydrogels that can facilitate exploration of the multifaceted roles of proteolytic extracellular matrix remodeling in tumor progression. We designed a set of bicyclo[6.1.0]nonyne functionalized hyaluronan (HA)-based bioinks cross-linked by azide-modified poly(ethylene glycol) (PEG) or matrix metalloproteinase (MMP) degradable azide-functionalized peptides. Bioprinted structures combining PEG and peptide-based hydrogels were proteolytically degraded with spatial selectivity, leaving non-degradable features intact. Bioprinting of tumor-mimicking microenvironments using bioinks comprising human breast cancer cells (MCF-7) and fibroblast in hydrogels with different susceptibilities to proteolytic degradation shows that MCF-7 proliferation and spheroid size were significantly increased in protease degradable hydrogel compartments, but only in the presence of fibroblasts. In the absence of fibroblasts in the stromal compartment, cancer cell proliferation was reduced and did not differ between degradable and nondegradable hydrogels. The interactions between spatially separated fibroblasts and MCF-7 cells consequently resulted in protease-mediated remodeling of the bioprinted structures and a significant increase in cancer cell spheroid size, highlighting the close interplay between cancer cells and stromal cells in the tumor microenvironment and the influence of proteases in tumor progression.
- 12 January 2024
- Published by IOP Publishing in Biofabrication
- Vol. 16 (2) , 025002
Open AccessProteolytic remodeling of 3D bioprinted tumor microenvironments
In native tissue, remodeling of the pericellular space is essential for cellular activities and is mediated by tightly regulated proteases. Protease activity is dysregulated in many diseases, including many forms of cancer. Increased proteolytic activity is directly linked to tumor invasion into stroma, metastasis, and angiogenesis as well as all other hallmarks of cancer. Here we show a strategy for 3D bioprinting of breast cancer models using well-defined protease degradable hydrogels that can facilitate exploration of the multifaceted roles of proteolytic extracellular matrix remodeling in tumor progression. We designed a set of bicyclo[6.1.0]nonyne functionalized hyaluronan (HA)-based bioinks cross-linked by azide-modified poly(ethylene glycol) (PEG) or matrix metalloproteinase (MMP) degradable azide-functionalized peptides. Bioprinted structures combining PEG and peptide-based hydrogels were proteolytically degraded with spatial selectivity, leaving non-degradable features intact. Bioprinting of tumor-mimicking microenvironments using bioinks comprising human breast cancer cells (MCF-7) and fibroblast in hydrogels with different susceptibilities to proteolytic degradation shows that MCF-7 proliferation and spheroid size were significantly increased in protease degradable hydrogel compartments, but only in the presence of fibroblasts. In the absence of fibroblasts in the stromal compartment, cancer cell proliferation was reduced and did not differ between degradable and nondegradable hydrogels. The interactions between spatially separated fibroblasts and MCF-7 cells consequently resulted in protease-mediated remodeling of the bioprinted structures and a significant increase in cancer cell spheroid size, highlighting the close interplay between cancer cells and stromal cells in the tumor microenvironment and the influence of proteases in tumor progression.
- Open Access
Proteolytic Remodeling of 3D Bioprinted Tumor Microenvironments
In native tissue, remodeling of the pericellular space is essential for cellular activities and is mediated by tightly regulated proteases. Protease activity is dysregulated in many diseases, including many forms of cancer. Increased proteolytic activity is directly linked to tumor invasion into stroma, metastasis, and angiogenesis as well as all other hallmarks of cancer. Here we show how integrated 3D bioprinted structures with distinctly different responses to proteolytic activity can be utilized for systematic investigation of proteolytic remodeling of the extra cellular matrix and the impact of stromal cells on protease driven processes. Bioprinted structures combining non-degradable and degradable hydrogels were designed and demonstrated to be selectively degraded by proteases allowing for protease-mediated material reorganization with high spatial resolution. Bioprinting of tumor microenvironments combining bioinks with different susceptibilities to proteolytic degradation shows that breast cancer cell proliferation, migration into stromal compartments, and spheroid size are significantly increased in protease degradable hydrogels, but only in the presence of fibroblasts. Proteolytic remodeling of the tumor microenvironment has a significant effect on tumor progression and is drastically influenced by the intimate crosstalk between fibroblast and breast cancer cells.
Open AccessProteolytic Remodeling of 3D Bioprinted Tumor Microenvironments
In native tissue, remodeling of the pericellular space is essential for cellular activities and is mediated by tightly regulated proteases. Protease activity is dysregulated in many diseases, including many forms of cancer. Increased proteolytic activity is directly linked to tumor invasion into stroma, metastasis, and angiogenesis as well as all other hallmarks of cancer. Here we show how integrated 3D bioprinted structures with distinctly different responses to proteolytic activity can be utilized for systematic investigation of proteolytic remodeling of the extra cellular matrix and the impact of stromal cells on protease driven processes. Bioprinted structures combining non-degradable and degradable hydrogels were designed and demonstrated to be selectively degraded by proteases allowing for protease-mediated material reorganization with high spatial resolution. Bioprinting of tumor microenvironments combining bioinks with different susceptibilities to proteolytic degradation shows that breast cancer cell proliferation, migration into stromal compartments, and spheroid size are significantly increased in protease degradable hydrogels, but only in the presence of fibroblasts. Proteolytic remodeling of the tumor microenvironment has a significant effect on tumor progression and is drastically influenced by the intimate crosstalk between fibroblast and breast cancer cells.
- Open Access
- 28 March 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Multimodal and Dynamic Cross-Linking of Modular Thiolated Alginate-Based Bioinks
Engineered extracellular matrix-mimicking hydrogels can facilitate 3D cell culture and fabrication of tissue-like constructs and biologically relevant disease models. Processing of cell-laden hydrogels using additive manufacturing techniques further allows for the development of tissue-mimetic structures with higher spatial complexity. Whereas a wide range of printable hydrogels is available, they tend to lack biological functionality and cell compatibility. Here we show an enzymatically mediated thiol-based cross-linking strategy for the design of modular and cytocompatible hydrogel-based bioinks for 3D bioprinting of dynamic multi-material architectures. Alginate is functionalized with cysteines modified with an enzyme-labile thiol protection group. Deprotection using penicillin G acylase (PGA) generates free thiols on-demand, enabling hydrogel cross-linking using thiol-reactive cross-linkers and intramolecular disulfides while avoiding undesired and uncontrolled thiol oxidation. Remaining free thiols can be used for post-printing hydrogel functionalization and lamination of multilayer structures. Moreover, the addition of PGA to a thermo-reversible hydrogel support bath enables the bioprinting of cell-laden 3D structures with high cell viability and excellent shape fidelity. The possibilities to enzymatically generate free thiols during bioprinting facilitate cross-linking and tuning of bioink properties using cytocompatible chemistries and allow for the printing of complex and dynamic cell-laden structures.
- 28 March 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMultimodal and Dynamic Cross-Linking of Modular Thiolated Alginate-Based Bioinks
Engineered extracellular matrix-mimicking hydrogels can facilitate 3D cell culture and fabrication of tissue-like constructs and biologically relevant disease models. Processing of cell-laden hydrogels using additive manufacturing techniques further allows for the development of tissue-mimetic structures with higher spatial complexity. Whereas a wide range of printable hydrogels is available, they tend to lack biological functionality and cell compatibility. Here we show an enzymatically mediated thiol-based cross-linking strategy for the design of modular and cytocompatible hydrogel-based bioinks for 3D bioprinting of dynamic multi-material architectures. Alginate is functionalized with cysteines modified with an enzyme-labile thiol protection group. Deprotection using penicillin G acylase (PGA) generates free thiols on-demand, enabling hydrogel cross-linking using thiol-reactive cross-linkers and intramolecular disulfides while avoiding undesired and uncontrolled thiol oxidation. Remaining free thiols can be used for post-printing hydrogel functionalization and lamination of multilayer structures. Moreover, the addition of PGA to a thermo-reversible hydrogel support bath enables the bioprinting of cell-laden 3D structures with high cell viability and excellent shape fidelity. The possibilities to enzymatically generate free thiols during bioprinting facilitate cross-linking and tuning of bioink properties using cytocompatible chemistries and allow for the printing of complex and dynamic cell-laden structures.
- Open Access
Long-lasting humoral immunity in Covid-19 infected patients at a University Hospital Clinic in Östergötland County Council during 2020-2021
Longitudinal serum samples and nasopharyngeal/nasal swab samples were collected from forty-eight individuals (median age 66yrs) with Covid-19 PCR-positive test results at Linköping University Hospital. Samples were collected from initial visit and for 6 months follow up. Presence of serum IgG and IgA against SARS-CoV-2 antigens (S1-spike, nucleocapsid and NSP3) were analyzed. Nasal swabs were tested for presence of IgA against the outer envelope S1 spike protein. Ninety-two percent of participants were seropositive against SARS-CoV-2 recombinant proteins at day 28 from study entry and all (100%) were seropositive from samples collected at 2 months or later. The most common antibody responses (both serum IgG, mainly IgG1 and IgA) were detected against the S1-spike protein and the nucleoprotein. In samples collected from nasal tissues considerably lower frequencies of IgA-positive reactivities were detected. Sixteen to 18 percent of study participants showed detectable IgA levels in nasal samples, except at day 60 when 36% of tested individuals showed presence of IgA against the S1-spike protein. The study suggests that the absolute majority of studied naturally infected Covid-19 patient in the Linkoping, Ostergotland health region develop over 6 months lasting detectable levels of serum IgG and IgA responses towards the SARS-CoV-2 S1-spike protein as well as against the nucleoprotein, but not against the non-structural protein 3.
Open AccessLong-lasting humoral immunity in Covid-19 infected patients at a University Hospital Clinic in Östergötland County Council during 2020-2021
Longitudinal serum samples and nasopharyngeal/nasal swab samples were collected from forty-eight individuals (median age 66yrs) with Covid-19 PCR-positive test results at Linköping University Hospital. Samples were collected from initial visit and for 6 months follow up. Presence of serum IgG and IgA against SARS-CoV-2 antigens (S1-spike, nucleocapsid and NSP3) were analyzed. Nasal swabs were tested for presence of IgA against the outer envelope S1 spike protein. Ninety-two percent of participants were seropositive against SARS-CoV-2 recombinant proteins at day 28 from study entry and all (100%) were seropositive from samples collected at 2 months or later. The most common antibody responses (both serum IgG, mainly IgG1 and IgA) were detected against the S1-spike protein and the nucleoprotein. In samples collected from nasal tissues considerably lower frequencies of IgA-positive reactivities were detected. Sixteen to 18 percent of study participants showed detectable IgA levels in nasal samples, except at day 60 when 36% of tested individuals showed presence of IgA against the S1-spike protein. The study suggests that the absolute majority of studied naturally infected Covid-19 patient in the Linkoping, Ostergotland health region develop over 6 months lasting detectable levels of serum IgG and IgA responses towards the SARS-CoV-2 S1-spike protein as well as against the nucleoprotein, but not against the non-structural protein 3.
- Open Access
- 29 June 2020
- Published by IOP Publishing in Biofabrication
- Vol. 12 (3) , 035031
Dynamic peptide-folding mediated biofunctionalization and modulation of hydrogels for 4D bioprinting
Hydrogels are used in a wide range of biomedical applications, including three-dimensional (3D) cell culture, cell therapy and bioprinting. To enable processing using advanced additive fabrication techniques and to mimic the dynamic nature of the extracellular matrix (ECM), the properties of the hydrogels must be possible to tailor and change over time with high precision. The design of hydrogels that are both structurally and functionally dynamic, while providing necessary mechanical support is challenging using conventional synthesis techniques. Here, we show a modular and 3D printable hydrogel system that combines a robust but tunable covalent bioorthogonal cross-linking strategy with specific peptide-folding mediated interactions for dynamic modulation of cross-linking and functionalization. The hyaluronan-based hydrogels were covalently cross-linked by strain-promoted alkyne-azide cycloaddition using multi-arm poly(ethylene glycol). In addition, a de novo designed helix-loop-helix peptide was conjugated to the hyaluronan backbone to enable specific peptide-folding modulation of cross-linking density and kinetics, and hydrogel functionality. An array of complementary peptides with different functionalities was developed and used as a toolbox for supramolecular tuning of cell-hydrogel interactions and for controlling enzyme-mediated biomineralization processes. The modular peptide system enabled dynamic modifications of the properties of 3D printed structures, demonstrating a novel route for design of more sophisticated bioinks for four-dimensional bioprinting.
- 29 June 2020
- Published by IOP Publishing in Biofabrication
- Vol. 12 (3) , 035031
Open AccessDynamic peptide-folding mediated biofunctionalization and modulation of hydrogels for 4D bioprinting
Hydrogels are used in a wide range of biomedical applications, including three-dimensional (3D) cell culture, cell therapy and bioprinting. To enable processing using advanced additive fabrication techniques and to mimic the dynamic nature of the extracellular matrix (ECM), the properties of the hydrogels must be possible to tailor and change over time with high precision. The design of hydrogels that are both structurally and functionally dynamic, while providing necessary mechanical support is challenging using conventional synthesis techniques. Here, we show a modular and 3D printable hydrogel system that combines a robust but tunable covalent bioorthogonal cross-linking strategy with specific peptide-folding mediated interactions for dynamic modulation of cross-linking and functionalization. The hyaluronan-based hydrogels were covalently cross-linked by strain-promoted alkyne-azide cycloaddition using multi-arm poly(ethylene glycol). In addition, a de novo designed helix-loop-helix peptide was conjugated to the hyaluronan backbone to enable specific peptide-folding modulation of cross-linking density and kinetics, and hydrogel functionality. An array of complementary peptides with different functionalities was developed and used as a toolbox for supramolecular tuning of cell-hydrogel interactions and for controlling enzyme-mediated biomineralization processes. The modular peptide system enabled dynamic modifications of the properties of 3D printed structures, demonstrating a novel route for design of more sophisticated bioinks for four-dimensional bioprinting.