Balasubramanian Rukmanikrishnan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Balasubramanian Rukmanikrishnan has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Jaewoong Lee
Department of Fiber System Engineering, Yeungnam University, Gyeongsan, Republic of Korea
10 shared publications Srinivasan Ramalingam
Yeungnam University
5 shared publicationsChaehyun Jo
Department of fiber system engineering, Yeungnam University, Gyeongsan 38541, South Korea
4 shared publicationsJaewoong Lee
Yeungnam University
3 shared publicationsSam Soo Kim
Yeungnam University
3 shared publications- Sam Soo Kim
Department of Fiber System Engineering, Yeungnam University, South Korea
3 shared publications
Latest Publications
- Open Access
- 23 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (40) , 41258-41267
Stretchable Composite Films Are Prepared by Using Cellulose Pulp with Differential Substitution of Carboxymethyl Cellulose and Thymol with an Infrared Heating Process for Packaging Application
Herein, cellulose pulp (CP), carboxymethyl cellulose (CMC), and thymol-based eco-friendly, transparent, and flexible composite films are prepared. These materials dissolved well in an environment-friendly process in N-methyl morpholine N-oxide (NMMO) ionic liquids using infrared heating. Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses are used to study the structure, microstructure, and morphology of the composite films. The thermal properties of the CP/CMC/thymol composites are thoroughly studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The thermal stability of the composites (T 5%-57.8-91.2 °C and T 10%-216.6-284.1 °C) significantly improves following the CMC addition. In each case, all the composite film exhibits unique T g (140.5-143.1 °C) values, as confirmed by DSC. The tensile strength of the cellulose pulp is 66.5 MPa, increasing to 78.4 MPa for the CP/CMC-1:0.5 composites and steadily increasing to 93.8 MPa with increasing CMC content. Similarly, CMC increases the EB of cellulose pulp from 9.3 to 7.4%. The water vapor permeability and swelling ratio values of the CP/CMC/thymol composites are in the range of 1.9-2.11 × 10-9 g/(m2·Pa·s) and 52.5-50.8° respectively. The CP, CMC, and thymol-based composite do not exhibit cytotoxicity to the aneuploid immortal keratinocyte cell line and demonstrate excellent antioxidant properties, for promising packaging and biomedical applications.
- 23 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (40) , 41258-41267
Open AccessStretchable Composite Films Are Prepared by Using Cellulose Pulp with Differential Substitution of Carboxymethyl Cellulose and Thymol with an Infrared Heating Process for Packaging Application
Herein, cellulose pulp (CP), carboxymethyl cellulose (CMC), and thymol-based eco-friendly, transparent, and flexible composite films are prepared. These materials dissolved well in an environment-friendly process in N-methyl morpholine N-oxide (NMMO) ionic liquids using infrared heating. Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses are used to study the structure, microstructure, and morphology of the composite films. The thermal properties of the CP/CMC/thymol composites are thoroughly studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The thermal stability of the composites (T 5%-57.8-91.2 °C and T 10%-216.6-284.1 °C) significantly improves following the CMC addition. In each case, all the composite film exhibits unique T g (140.5-143.1 °C) values, as confirmed by DSC. The tensile strength of the cellulose pulp is 66.5 MPa, increasing to 78.4 MPa for the CP/CMC-1:0.5 composites and steadily increasing to 93.8 MPa with increasing CMC content. Similarly, CMC increases the EB of cellulose pulp from 9.3 to 7.4%. The water vapor permeability and swelling ratio values of the CP/CMC/thymol composites are in the range of 1.9-2.11 × 10-9 g/(m2·Pa·s) and 52.5-50.8° respectively. The CP, CMC, and thymol-based composite do not exhibit cytotoxicity to the aneuploid immortal keratinocyte cell line and demonstrate excellent antioxidant properties, for promising packaging and biomedical applications.
- 6 July 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (18)
Secondary Reorientation and Hygroscopic Forces in Chitinous Biopolymers and Their Use for Passive and Biochemical Actuation
Passive actuation is the production of movement or deformation without external power sources or control systems. This phenomenon has been gaining significant attention in the engineering community due to its potential use in energy‐efficient systems, in which part of the functionality is programmed in the material composition to reduce overall cost and complexity. Biological organisms, formed through millennia of evolution in a paradigm of limited resources and energy and at a multiscale equilibrium with their environment, have developed a myriad of outstanding materials and strategies for integrating complex functionalities into their multiscale structural design. In this study, the arthropod exoskeleton's chitinous composition and manufacturing strategies are used to reproduce its complex relations with external forces and water‐driven molecular rearrangement and use them to produce electricity and actuate a mechanical hand. The proposed technology is unique in combining the generation of strong forces and the integration of the principles and materials of biological organisms, leading to significant advances in the design and performance of passive solutions integrated into biological systems for a wide range of applications, such as biorobotics, medical devices, and energy harvesting.
- 6 July 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (18)
Secondary Reorientation and Hygroscopic Forces in Chitinous Biopolymers and Their Use for Passive and Biochemical Actuation
Passive actuation is the production of movement or deformation without external power sources or control systems. This phenomenon has been gaining significant attention in the engineering community due to its potential use in energy‐efficient systems, in which part of the functionality is programmed in the material composition to reduce overall cost and complexity. Biological organisms, formed through millennia of evolution in a paradigm of limited resources and energy and at a multiscale equilibrium with their environment, have developed a myriad of outstanding materials and strategies for integrating complex functionalities into their multiscale structural design. In this study, the arthropod exoskeleton's chitinous composition and manufacturing strategies are used to reproduce its complex relations with external forces and water‐driven molecular rearrangement and use them to produce electricity and actuate a mechanical hand. The proposed technology is unique in combining the generation of strong forces and the integration of the principles and materials of biological organisms, leading to significant advances in the design and performance of passive solutions integrated into biological systems for a wide range of applications, such as biorobotics, medical devices, and energy harvesting.
- Open Access
Properties of Cellulose Pulp and Polyurethane Composite Films Fabricated with Curcumin by Using NMMO Ionic Liquid
Cellulose pulp (CP), polyurethane (PU), and curcumin-based biocompatible composite films were prepared using a simple cost-effective method. Significant structural and microstructural changes were studied using FT-IR spectroscopy, XRD, and SEM. The 5% and 10% gravimetric losses of the CP/PU/curcumin composite were found to be in the range 87.2–182.3 °C and 166.7–249.8 °C, respectively. All the composites exhibited single Tg values in the range 147.4–154.2 °C. The tensile strength of CP was measured to be 93.2 MPa, which dropped to 14.1 MPa for the 1:0.5 CP/PU composite and then steadily increased to 30.5 MPa with further addition of PU. The elongation at the break of the composites decreased from 8.1 to 3.7% with the addition of PU. The addition of PU also improved the water vapor permeability (3.96 × 10−9 to 1.75 × 10−9 g m−1 s−1 Pa−1) and swelling ratio (285 to 202%) of the CP composite films. The CP/PU/curcumin composite exhibited good antioxidant activity and no cytotoxicity when tested on the HaCat cell line. The visual appearance and UV transmittance (86.2–32.9% at 600 nm) of the CP composite films were significantly altered by the incorporation of PU and curcumin. This study demonstrates that CP/PU/curcumin composites can be used for various packaging and biomedical applications.
Open AccessProperties of Cellulose Pulp and Polyurethane Composite Films Fabricated with Curcumin by Using NMMO Ionic Liquid
Cellulose pulp (CP), polyurethane (PU), and curcumin-based biocompatible composite films were prepared using a simple cost-effective method. Significant structural and microstructural changes were studied using FT-IR spectroscopy, XRD, and SEM. The 5% and 10% gravimetric losses of the CP/PU/curcumin composite were found to be in the range 87.2–182.3 °C and 166.7–249.8 °C, respectively. All the composites exhibited single Tg values in the range 147.4–154.2 °C. The tensile strength of CP was measured to be 93.2 MPa, which dropped to 14.1 MPa for the 1:0.5 CP/PU composite and then steadily increased to 30.5 MPa with further addition of PU. The elongation at the break of the composites decreased from 8.1 to 3.7% with the addition of PU. The addition of PU also improved the water vapor permeability (3.96 × 10−9 to 1.75 × 10−9 g m−1 s−1 Pa−1) and swelling ratio (285 to 202%) of the CP composite films. The CP/PU/curcumin composite exhibited good antioxidant activity and no cytotoxicity when tested on the HaCat cell line. The visual appearance and UV transmittance (86.2–32.9% at 600 nm) of the CP composite films were significantly altered by the incorporation of PU and curcumin. This study demonstrates that CP/PU/curcumin composites can be used for various packaging and biomedical applications.
- Open Access
- 23 November 2021
- Published by Springer Nature in Research Square
Packaging Composite Films Fabricated from Cellulose Pulp with Polyurethane and Curcumin by Using NMMO ionic Liquid Solvent
Cellulose pulp (CP), polyurethane (PU), and curcumin-based biocompatible composite films were prepared using a simple cost-effective method. These materials dissolved well in the ionic liquid solvent N-methylmorpholine N-oxide. Significant structural and microstructural changes were observed in CP upon the addition of PU. These changes were studied using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The 5% and 10% gravimetric losses of the CP/PU/curcumin composite were found to be in the range 87.2–182.3 ºC and 166.7–249.8 ºC, respectively. The addition of PU significantly improved the thermal stability and water barrier properties of the composites. All the composites exhibited single Tg values in the range 147.4–154.2 ºC. The tensile strength of CP was measured to be 93.2 MPa, which dropped to 14.1 MPa for the 1:0.5 CP/PU composite and then steadily increased to 30.5 MPa with further addition of PU. The elongation at break of the composites decreased from 8.1 to 3.7% with the addition of PU. The addition of PU also improved the water vapor permeability (3.96 ×10–9 to 1.75 ×10–9 g m–1 s–1 Pa–1) and swelling ratio (285 to 202%) of the CP composite films. The CP/PU/curcumin composite exhibited good antioxidant activity and no cytotoxicity when tested on the HaCat cell line. The visual appearance and UV transmittance (86.2–32.9% at 600 nm) of the CP composite films were significantly altered by the incorporation of PU and curcumin. This study demonstrates that CP/PU/curcumin composites can be used for various packaging and biomedical applications.
- 23 November 2021
- Published by Springer Nature in Research Square
Open AccessPackaging Composite Films Fabricated from Cellulose Pulp with Polyurethane and Curcumin by Using NMMO ionic Liquid Solvent
Cellulose pulp (CP), polyurethane (PU), and curcumin-based biocompatible composite films were prepared using a simple cost-effective method. These materials dissolved well in the ionic liquid solvent N-methylmorpholine N-oxide. Significant structural and microstructural changes were observed in CP upon the addition of PU. These changes were studied using Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The 5% and 10% gravimetric losses of the CP/PU/curcumin composite were found to be in the range 87.2–182.3 ºC and 166.7–249.8 ºC, respectively. The addition of PU significantly improved the thermal stability and water barrier properties of the composites. All the composites exhibited single Tg values in the range 147.4–154.2 ºC. The tensile strength of CP was measured to be 93.2 MPa, which dropped to 14.1 MPa for the 1:0.5 CP/PU composite and then steadily increased to 30.5 MPa with further addition of PU. The elongation at break of the composites decreased from 8.1 to 3.7% with the addition of PU. The addition of PU also improved the water vapor permeability (3.96 ×10–9 to 1.75 ×10–9 g m–1 s–1 Pa–1) and swelling ratio (285 to 202%) of the CP composite films. The CP/PU/curcumin composite exhibited good antioxidant activity and no cytotoxicity when tested on the HaCat cell line. The visual appearance and UV transmittance (86.2–32.9% at 600 nm) of the CP composite films were significantly altered by the incorporation of PU and curcumin. This study demonstrates that CP/PU/curcumin composites can be used for various packaging and biomedical applications.
- 29 September 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (40) , 13653-13662
Cellulose-Pulp-Based Stretchable Composite Film with Hydroxyethyl Cellulose and Turmeric Powder for Packaging Applications
- 29 September 2021
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 9 (40) , 13653-13662
Cellulose-Pulp-Based Stretchable Composite Film with Hydroxyethyl Cellulose and Turmeric Powder for Packaging Applications
- 11 August 2021
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (10) , 2477-2486
Barrier, rheological, and antimicrobial properties of sustainable nanocomposites based on gellan gum/polyacrylamide/zinc oxide
In this study, we used a solution casting method to prepare gellan gum (G)‐based ternary nanocomposite films containing polyacrylamide (P) and zinc oxide (ZnO) nanoparticles. All composites were prepared using the chemical cross‐linker N,N‐methylenebisacrylamide. The nanocomposites were characterized using Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction, and scanning electron microscopy. Attenuated total reflectance FTIR revealed strong hydrogen bonding interactions among gellan gum, polyacrylamide, and ZnO, which enhanced the physiochemical, thermal, and mechanical properties of the GPZnO nanocomposites. The addition of ZnO nanoparticles increased the glass transition temperature (Tg: 181.8–196.3°C), thermal stability (T5%: 87.8–96.5°C), and char yield (23.9–29.1%) of the GP composite films, as well as their the tensile strength (from 33.5 to 43.8 MPa) and ultraviolet (UV) blocking properties (~99.2% protection against UVB [280–320 nm]). ZnO significantly influenced the rheological properties of the GP composite. The prepared GP and GPZnO nanocomposites exhibited shear thinning behavior and their viscosities decreased when there is an increase in shear rate. Storage and loss modulus increased with frequency with the addition of ZnO nanoparticles. The GPZnO films exhibited reduced hydrophilicity, moisture content, and water barrier properties compared with the GP film. The GPZnO nanocomposites exhibited effective antimicrobial activity against six different pathogens. The prepared GPZnO films could be useful in biodegradable packaging applications.
- 11 August 2021
- Published by Wiley in Polymer Engineering & Science
- Vol. 61 (10) , 2477-2486
Barrier, rheological, and antimicrobial properties of sustainable nanocomposites based on gellan gum/polyacrylamide/zinc oxide
In this study, we used a solution casting method to prepare gellan gum (G)‐based ternary nanocomposite films containing polyacrylamide (P) and zinc oxide (ZnO) nanoparticles. All composites were prepared using the chemical cross‐linker N,N‐methylenebisacrylamide. The nanocomposites were characterized using Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction, and scanning electron microscopy. Attenuated total reflectance FTIR revealed strong hydrogen bonding interactions among gellan gum, polyacrylamide, and ZnO, which enhanced the physiochemical, thermal, and mechanical properties of the GPZnO nanocomposites. The addition of ZnO nanoparticles increased the glass transition temperature (Tg: 181.8–196.3°C), thermal stability (T5%: 87.8–96.5°C), and char yield (23.9–29.1%) of the GP composite films, as well as their the tensile strength (from 33.5 to 43.8 MPa) and ultraviolet (UV) blocking properties (~99.2% protection against UVB [280–320 nm]). ZnO significantly influenced the rheological properties of the GP composite. The prepared GP and GPZnO nanocomposites exhibited shear thinning behavior and their viscosities decreased when there is an increase in shear rate. Storage and loss modulus increased with frequency with the addition of ZnO nanoparticles. The GPZnO films exhibited reduced hydrophilicity, moisture content, and water barrier properties compared with the GP film. The GPZnO nanocomposites exhibited effective antimicrobial activity against six different pathogens. The prepared GPZnO films could be useful in biodegradable packaging applications.
- 17 April 2021
- Published by Springer Nature in Cellulose
- Vol. 28 (9) , 5577-5590
Rheological and anti-microbial study of silica and silver nanoparticles-reinforced k-carrageenan/hydroxyethyl cellulose composites for food packaging applications
- 17 April 2021
- Published by Springer Nature in Cellulose
- Vol. 28 (9) , 5577-5590
Rheological and anti-microbial study of silica and silver nanoparticles-reinforced k-carrageenan/hydroxyethyl cellulose composites for food packaging applications
- Open Access
- 23 February 2021
- Published by Springer Nature in Research Square
Rheological and Antimicrobial Properties of Silica and silver Nanoparticles-reinforced K-carrageenan/hydroxyethyl Cellulose Composites for Food Packaging Applications
Sustainable food packaging films were developed using a combination of k-Carrageenan (C), hydroxyl ethyl cellulose (H), silicon dioxide (SiO2), and silver (Ag) nanoparticles. The CH-SiO2/Ag nanocomposites showed promising results, mainly due to their transparency, flexibility, low cost, and environmental friendliness. The structure and uniform morphology of the CH-SiO2/Ag nanocomposites were determined by FT-IR, XRD, and SEM analysis. Barrier properties (water vapor permeability-WVP), thermal properties (T5% loss, char yield), and mechanical properties determined for the CH and CH-SiO2/Ag nanocomposites, which improved by 3.3–1.9 ×10− 9gm/m2 Pas (WVP), 59.1-115.7 oC (T5%), 13.4–29.3 % (char yield), 23.8–41.5 MPa(tensile strength), and 22.3–28.9 (EB), respectively. The contact angles of the CH-SiO2/Ag nanocomposites were in the range of 60.1–76.4. The UV transmittance of the CH composites decreased with the addition of SiO2 and Ag nanoparticles. However, the transparency of the composites was not affected, and it inhibited UVA and UVB rays by the addition of Ag nanoparticles. The viscosity of the CH composites increased with the SiO2 content and decreased with the shear rate. All the composites exhibited shear-thinning behavior. The storage modulus of the prepared composites is higher than the loss modulus in the entire frequency region. Overall, SiO2 and Ag nanoparticles improved the hydrophilic nature of the CH-SiO2/Ag films and showed significant activity against six common food pathogens, Staphylococcus aureus, Bacillus cereus, Listeria monocytogenes, Bacillus subtilis, Salmonella typhi, and Cronobacter sakazakii. The synergistic combination of CH-SiO2/Ag nanocomposite has potential for packaging and other biomedical applications.
- 23 February 2021
- Published by Springer Nature in Research Square
Open AccessRheological and Antimicrobial Properties of Silica and silver Nanoparticles-reinforced K-carrageenan/hydroxyethyl Cellulose Composites for Food Packaging Applications
Sustainable food packaging films were developed using a combination of k-Carrageenan (C), hydroxyl ethyl cellulose (H), silicon dioxide (SiO2), and silver (Ag) nanoparticles. The CH-SiO2/Ag nanocomposites showed promising results, mainly due to their transparency, flexibility, low cost, and environmental friendliness. The structure and uniform morphology of the CH-SiO2/Ag nanocomposites were determined by FT-IR, XRD, and SEM analysis. Barrier properties (water vapor permeability-WVP), thermal properties (T5% loss, char yield), and mechanical properties determined for the CH and CH-SiO2/Ag nanocomposites, which improved by 3.3–1.9 ×10− 9gm/m2 Pas (WVP), 59.1-115.7 oC (T5%), 13.4–29.3 % (char yield), 23.8–41.5 MPa(tensile strength), and 22.3–28.9 (EB), respectively. The contact angles of the CH-SiO2/Ag nanocomposites were in the range of 60.1–76.4. The UV transmittance of the CH composites decreased with the addition of SiO2 and Ag nanoparticles. However, the transparency of the composites was not affected, and it inhibited UVA and UVB rays by the addition of Ag nanoparticles. The viscosity of the CH composites increased with the SiO2 content and decreased with the shear rate. All the composites exhibited shear-thinning behavior. The storage modulus of the prepared composites is higher than the loss modulus in the entire frequency region. Overall, SiO2 and Ag nanoparticles improved the hydrophilic nature of the CH-SiO2/Ag films and showed significant activity against six common food pathogens, Staphylococcus aureus, Bacillus cereus, Listeria monocytogenes, Bacillus subtilis, Salmonella typhi, and Cronobacter sakazakii. The synergistic combination of CH-SiO2/Ag nanocomposite has potential for packaging and other biomedical applications.
- 27 October 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (44) , 28767-28775
Flexible Ternary Combination of Gellan Gum, Sodium Carboxymethyl Cellulose, and Silicon Dioxide Nanocomposites Fabricated by Quaternary Ammonium Silane: Rheological, Thermal, and Antimicrobial Properties
Gellan gum–sodium carboxymethyl cellulose (GC)-based composite films with various concentrations of silicon dioxide (SiO2) nanoparticles and octadecyldimethyl-(3-triethoxy silylpropyl)ammonium chloride (ODDMAC) were successfully prepared by the traditional solution casting method to improve the antimicrobial and water repellent properties. Fourier transform infrared (FT-IR) spectra confirm the formation of hydrogen bonds between the GC and nano-SiO2. The microstructure and physicochemical properties were investigated by FT-IR, wide-angle X-ray diffraction, and scanning electron microscopy (SEM) analyses. The rheological properties of the GC–SiO2 hydrogel were also characterized. The results show that the inclusion of SiO2 nanoparticles significantly improved the viscosity and viscoelastic properties of the GC hydrogel. The GC–SiO2 hydrogel exhibited shear-thinning behavior and its viscosity decreased at high shear rates. The storage and loss moduli of the GC composites increased as the frequency and SiO2 concentration increased. The tensile strength and elongation at break of the GC composites increased by 75.9 and 62%, respectively, with the addition of SiO2 and ODDMAC. In addition, nano-SiO2 decreased the water vapor permeability and increased the hydrophobic properties of the GC–SiO2 composites. Thermogravimetric analysis showed that the T5% loss was in the range of 99.4–128.6 °C and the char yield was in the range of 20.1–29.9%, which was significantly enhanced by the incorporation of SiO2 nanoparticles. The GC–SiO2 (ODDMAC) nanocomposites effectively shielded the UV light and exhibited high antimicrobial activity against six different pathogens. The simple and cost-effective GC–SiO2 (ODDMAC) nanocomposites gained importance in food packaging and biomedical applications.
- 27 October 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (44) , 28767-28775
Flexible Ternary Combination of Gellan Gum, Sodium Carboxymethyl Cellulose, and Silicon Dioxide Nanocomposites Fabricated by Quaternary Ammonium Silane: Rheological, Thermal, and Antimicrobial Properties
Gellan gum–sodium carboxymethyl cellulose (GC)-based composite films with various concentrations of silicon dioxide (SiO2) nanoparticles and octadecyldimethyl-(3-triethoxy silylpropyl)ammonium chloride (ODDMAC) were successfully prepared by the traditional solution casting method to improve the antimicrobial and water repellent properties. Fourier transform infrared (FT-IR) spectra confirm the formation of hydrogen bonds between the GC and nano-SiO2. The microstructure and physicochemical properties were investigated by FT-IR, wide-angle X-ray diffraction, and scanning electron microscopy (SEM) analyses. The rheological properties of the GC–SiO2 hydrogel were also characterized. The results show that the inclusion of SiO2 nanoparticles significantly improved the viscosity and viscoelastic properties of the GC hydrogel. The GC–SiO2 hydrogel exhibited shear-thinning behavior and its viscosity decreased at high shear rates. The storage and loss moduli of the GC composites increased as the frequency and SiO2 concentration increased. The tensile strength and elongation at break of the GC composites increased by 75.9 and 62%, respectively, with the addition of SiO2 and ODDMAC. In addition, nano-SiO2 decreased the water vapor permeability and increased the hydrophobic properties of the GC–SiO2 composites. Thermogravimetric analysis showed that the T5% loss was in the range of 99.4–128.6 °C and the char yield was in the range of 20.1–29.9%, which was significantly enhanced by the incorporation of SiO2 nanoparticles. The GC–SiO2 (ODDMAC) nanocomposites effectively shielded the UV light and exhibited high antimicrobial activity against six different pathogens. The simple and cost-effective GC–SiO2 (ODDMAC) nanocomposites gained importance in food packaging and biomedical applications.
- 1 December 2019
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 141, 538-544
Rheological, morphological, mechanical, and water-barrier properties of agar/gellan gum/montmorillonite clay composite films
- 1 December 2019
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 141, 538-544
Rheological, morphological, mechanical, and water-barrier properties of agar/gellan gum/montmorillonite clay composite films