Jie Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jie Liu has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
Hao Wang
Department of Safety Engineering, Qingdao University of Technology, Qingdao, China
3 shared publicationsShouqing Lu
3 shared publications- Dazhao Song
State Key Laboratory of Metal Mine Mining Safety and Disaster Prevention and Control, University of Science and Technology Beijing, Beijing, China
2 shared publications Qiuping Li
Department of Safety Engineering, Northeastern University, Shenyang, China
2 shared publications- Qiuping Li
Department of Safety Engineering, Qingdao University of Technology, Qingdao 266520, China
2 shared publications Ran Zhang
Department of Safety Engineering, Qingdao University of Technology, Qingdao, Shandong 266520, China
2 shared publications
Latest Publications
- Open Access
- 24 September 2026
- Published by Wiley in Deep Underground Science and Engineering
Dynamic prediction of coal and gas outburst risk based on quantitative analysis of stress–energy evolution and adaptive correction
Accurate identification of coal and gas outburst (CGO) risk zones in deep coal mining remains a critical challenge for disaster prevention. CGO formation is governed by the coupled effects of stress redistribution, coal–gas occurrence conditions, and mining‐induced disturbances. To address this problem, a quantitative stress–energy analysis model is developed for the region ahead of the working face, in which these governing factors are explicitly quantified as model input parameters. The coupled stress–energy evolution of the coal–rock system is systematically investigated, thereby elucidating the mechanical mechanisms underlying CGO risk formation. The results show that the peak stress ahead of the working face is positively correlated with elastic‐zone stress anomalies, burial depth, coal compressive strength, and gas pressure, while exhibiting no clear correlation with coal seam thickness. In contrast, the plastic zone length is positively correlated with elastic‐zone stress anomalies, coal seam thickness, burial depth, and gas pressure, and negatively correlated with coal compressive strength. Multi‐factor coupling significantly modifies peak stress and plastic zone development, resulting in nonlinear energy accumulation and dissipation that directly control CGO risk. Based on these findings, a dynamic and adaptive CGO risk prediction method is developed by introducing an energy‐based indicator R within a unified mechanical–energy framework that integrates stress evolution, coal‐gas occurrence conditions, coal seam geometry, and mining‐induced disturbances. Field validation demonstrates that the proposed method exhibits reliable predictive performance, stable behavior, and meaningful forecasting lead time under complex geological conditions, providing a practical approach for CGO risk prediction in deep coal mining.
- 24 September 2026
- Published by Wiley in Deep Underground Science and Engineering
Open AccessDynamic prediction of coal and gas outburst risk based on quantitative analysis of stress–energy evolution and adaptive correction
Accurate identification of coal and gas outburst (CGO) risk zones in deep coal mining remains a critical challenge for disaster prevention. CGO formation is governed by the coupled effects of stress redistribution, coal–gas occurrence conditions, and mining‐induced disturbances. To address this problem, a quantitative stress–energy analysis model is developed for the region ahead of the working face, in which these governing factors are explicitly quantified as model input parameters. The coupled stress–energy evolution of the coal–rock system is systematically investigated, thereby elucidating the mechanical mechanisms underlying CGO risk formation. The results show that the peak stress ahead of the working face is positively correlated with elastic‐zone stress anomalies, burial depth, coal compressive strength, and gas pressure, while exhibiting no clear correlation with coal seam thickness. In contrast, the plastic zone length is positively correlated with elastic‐zone stress anomalies, coal seam thickness, burial depth, and gas pressure, and negatively correlated with coal compressive strength. Multi‐factor coupling significantly modifies peak stress and plastic zone development, resulting in nonlinear energy accumulation and dissipation that directly control CGO risk. Based on these findings, a dynamic and adaptive CGO risk prediction method is developed by introducing an energy‐based indicator R within a unified mechanical–energy framework that integrates stress evolution, coal‐gas occurrence conditions, coal seam geometry, and mining‐induced disturbances. Field validation demonstrates that the proposed method exhibits reliable predictive performance, stable behavior, and meaningful forecasting lead time under complex geological conditions, providing a practical approach for CGO risk prediction in deep coal mining.
- Open Access
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Spatiotemporal Damage Characterization of Progressive Coal Failure by Coupling Multipath Active Stress Waves with Acoustic Emission
Progressive damage and instability of coal are associated with dynamic hazards in coal mines, including rockbursts, and their early identification requires monitoring of structural degradation and fracture activity. This study investigates the stage-dependent evolution and path-scale spatial relationships between multi-path active stress-wave responses and passive acoustic emission (AE) during uniaxial compression. A time-gating separation method was developed from the periodicity, near-full-scale source response, source-first arrival, and stable travel-time differences of Auto Sensor Test (AST) pulses, enabling active waves along three paths to be separated from random passive AE signals. For four representative specimens, signal strength, wave velocity, and centroid frequency were analyzed together with three-dimensional AE localization, spatial cylindrical filtering, and RA–AF crack-type analysis. Signal strength and wave velocity increased during initial compaction and stable loading, then showed path-dependent peaks and declines during accelerated damage. The normalized times of the wave-velocity peaks ranged from 0.724 to 0.954 and generally preceded peak stress, while centroid frequency exhibited drift and reorganization. Active-wave parameter differentiation or anomalies generally preceded rapid increases in passive AE counts and energy, which occurred mainly from late accelerated damage to post-peak instability. Spatial cylindrical filtering showed that AE energy preferentially accumulated near propagation paths. Tensile events predominated throughout loading, whereas shear participation increased at later stages in some specimens. These findings demonstrate that active and passive acoustic monitoring provide complementary evidence of medium degradation and fracture-source activity, supporting directional damage characterization and identification of instability precursors in coal.
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSpatiotemporal Damage Characterization of Progressive Coal Failure by Coupling Multipath Active Stress Waves with Acoustic Emission
Progressive damage and instability of coal are associated with dynamic hazards in coal mines, including rockbursts, and their early identification requires monitoring of structural degradation and fracture activity. This study investigates the stage-dependent evolution and path-scale spatial relationships between multi-path active stress-wave responses and passive acoustic emission (AE) during uniaxial compression. A time-gating separation method was developed from the periodicity, near-full-scale source response, source-first arrival, and stable travel-time differences of Auto Sensor Test (AST) pulses, enabling active waves along three paths to be separated from random passive AE signals. For four representative specimens, signal strength, wave velocity, and centroid frequency were analyzed together with three-dimensional AE localization, spatial cylindrical filtering, and RA–AF crack-type analysis. Signal strength and wave velocity increased during initial compaction and stable loading, then showed path-dependent peaks and declines during accelerated damage. The normalized times of the wave-velocity peaks ranged from 0.724 to 0.954 and generally preceded peak stress, while centroid frequency exhibited drift and reorganization. Active-wave parameter differentiation or anomalies generally preceded rapid increases in passive AE counts and energy, which occurred mainly from late accelerated damage to post-peak instability. Spatial cylindrical filtering showed that AE energy preferentially accumulated near propagation paths. Tensile events predominated throughout loading, whereas shear participation increased at later stages in some specimens. These findings demonstrate that active and passive acoustic monitoring provide complementary evidence of medium degradation and fracture-source activity, supporting directional damage characterization and identification of instability precursors in coal.
- 2 March 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (4) , 1-22
Energy and Permeability Characteristics of Gassy Coal Throughout Loading–Unloading Failing Process
- 2 March 2026
- Published by Springer Nature in Natural Resources Research
- Vol. 35 (4) , 1-22
Energy and Permeability Characteristics of Gassy Coal Throughout Loading–Unloading Failing Process
- 21 January 2025
- Published by SAGE Publications in International Journal of Damage Mechanics
- Vol. 34 (10) , 1513-1535
Damage and permeability of gassy coal in loading – Unloading path
To effectively prevent dynamic gas disasters, the adding vertical and unloading radial stress were investigated in laboratory and numerical simulation experiments. The objective about the research was to ascertain how various gas pressures and loading rates affected permeability and damage deformation. The results conclude that shear failure predominates in gassy coal, a rise in loading rate causes the permeability to mutate more slowly, and the plastic strain gradually decreases at the yield, peak, and post-peak stable points in gassy coal. As well, a rise in gas pressure causes an earlier transition from compression to expansion state of specimens, enhances permeability, and rises the plastic strain at specified points. Furthermore, the study focuses on the meso-scale failure and permeability characteristics. During failure, the seepage channel within the coal body gradually transitions from a vertical orientation to irregular deformation. In addition, a damage model is formulated centered around energy consumption, demonstrating that damage evolution curves exhibit an ‘ S ’ shape with vertical strain. Meanwhile, higher axial loading rates delay the onset of unstable crack propagation, but raising gas pressure quickens the pace of damage to specimens. The conclusions of this research hold significant practical implications for mitigating coal-rock gas dynamic disasters.
- 21 January 2025
- Published by SAGE Publications in International Journal of Damage Mechanics
- Vol. 34 (10) , 1513-1535
Damage and permeability of gassy coal in loading – Unloading path
To effectively prevent dynamic gas disasters, the adding vertical and unloading radial stress were investigated in laboratory and numerical simulation experiments. The objective about the research was to ascertain how various gas pressures and loading rates affected permeability and damage deformation. The results conclude that shear failure predominates in gassy coal, a rise in loading rate causes the permeability to mutate more slowly, and the plastic strain gradually decreases at the yield, peak, and post-peak stable points in gassy coal. As well, a rise in gas pressure causes an earlier transition from compression to expansion state of specimens, enhances permeability, and rises the plastic strain at specified points. Furthermore, the study focuses on the meso-scale failure and permeability characteristics. During failure, the seepage channel within the coal body gradually transitions from a vertical orientation to irregular deformation. In addition, a damage model is formulated centered around energy consumption, demonstrating that damage evolution curves exhibit an ‘ S ’ shape with vertical strain. Meanwhile, higher axial loading rates delay the onset of unstable crack propagation, but raising gas pressure quickens the pace of damage to specimens. The conclusions of this research hold significant practical implications for mitigating coal-rock gas dynamic disasters.
- Open Access
- 21 December 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (1) , 105
Influence of Confining Pressure on Nonlinear Failure Characteristics of Coal Subjected to Triaxial Compression
The stress of a coal seam increases with an increase in the mining depth, which makes the failure mechanism of a coal mass more complex. To reveal the deformation and failure law of deep coal, a series of triaxial experiments was carried out via laboratory experiments and numerical simulation experiments to analyze the influence of the confining stress on the nonlinear failure characteristics of coal. Based on the crack-propagation model, the values for the inelastic flexibility S1 and the damage variable D were calculated. The results showed that the value of S1 decreased with an increase in the confining stress, which indicated that the increase in the confining pressure could inhibit the crack propagation and that the inhibitory effect was more obvious when the confining pressure increased in a small range of 4 to 12 MPa. The damage variable decreased with an increase in the confining pressure at the yield point; moreover, with an increase in the initial confining pressure, the damage rate gradually decreased. The coal body changed from the compression state to the expansion state when moving from the yield point to the peak point, and the compression value of the yield point and the dilation value of the peak point increased with the increase in the confining pressure. After the coal body entered the yield stage, the change in the confining pressure had a more significant effect on the damage to the coal body.
- 21 December 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (1) , 105
Open AccessInfluence of Confining Pressure on Nonlinear Failure Characteristics of Coal Subjected to Triaxial Compression
The stress of a coal seam increases with an increase in the mining depth, which makes the failure mechanism of a coal mass more complex. To reveal the deformation and failure law of deep coal, a series of triaxial experiments was carried out via laboratory experiments and numerical simulation experiments to analyze the influence of the confining stress on the nonlinear failure characteristics of coal. Based on the crack-propagation model, the values for the inelastic flexibility S1 and the damage variable D were calculated. The results showed that the value of S1 decreased with an increase in the confining stress, which indicated that the increase in the confining pressure could inhibit the crack propagation and that the inhibitory effect was more obvious when the confining pressure increased in a small range of 4 to 12 MPa. The damage variable decreased with an increase in the confining pressure at the yield point; moreover, with an increase in the initial confining pressure, the damage rate gradually decreased. The coal body changed from the compression state to the expansion state when moving from the yield point to the peak point, and the compression value of the yield point and the dilation value of the peak point increased with the increase in the confining pressure. After the coal body entered the yield stage, the change in the confining pressure had a more significant effect on the damage to the coal body.
- Open Access
- 27 June 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 19 (13) , 7873
Experimental Investigation on Mechanical and Acoustic Emission Characteristics of Gassy Coal under Different Stress Paths
Coal mining leads to stress loading–unloading variation in front of the working face, which influences the occurrence of disasters. In order to study the influence mechanism of stress loading–unloading to the coal failure, a series of experiments of gas-bearing coal deformation and failure under triaxial stress were conducted and acoustic emission (AE) was monitored. In this study, the effect of gas pressure on the mechanical behavior of gas-bearing coal in conventional triaxial stress (CTS) experiments and fixed axial stress and unloading confining stress (FASUCS) experiments was analyzed, and the damage evolution rules of gas-bearing coal in the CTS experiments and FASUCS experiments were determined using AE. The results show that with the increasing of gas pressure, the peak strength and peak strain of gas-bearing coal in the CTS experiments and FASUCS experiments gradually decrease, and the peak of AE ring-down counts lags behind the peak strength. Compared with the CTS experiments, the strength of gas-bearing coal in the FASUCS experiments is lower and the precursor information appears later. The trends in calculated stress and damage coefficient D are consistent with the stress path during unloading, and both begin to rise sharply after the sample enters the plastic stage. Therefore, AE ring-down counts, damage coefficient D, and calculated stress can be used as precursor information for failure of coal and rock, which has great significance for the further study of coal-rock material and for early hazard warning.
- 27 June 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 19 (13) , 7873
Open AccessExperimental Investigation on Mechanical and Acoustic Emission Characteristics of Gassy Coal under Different Stress Paths
Coal mining leads to stress loading–unloading variation in front of the working face, which influences the occurrence of disasters. In order to study the influence mechanism of stress loading–unloading to the coal failure, a series of experiments of gas-bearing coal deformation and failure under triaxial stress were conducted and acoustic emission (AE) was monitored. In this study, the effect of gas pressure on the mechanical behavior of gas-bearing coal in conventional triaxial stress (CTS) experiments and fixed axial stress and unloading confining stress (FASUCS) experiments was analyzed, and the damage evolution rules of gas-bearing coal in the CTS experiments and FASUCS experiments were determined using AE. The results show that with the increasing of gas pressure, the peak strength and peak strain of gas-bearing coal in the CTS experiments and FASUCS experiments gradually decrease, and the peak of AE ring-down counts lags behind the peak strength. Compared with the CTS experiments, the strength of gas-bearing coal in the FASUCS experiments is lower and the precursor information appears later. The trends in calculated stress and damage coefficient D are consistent with the stress path during unloading, and both begin to rise sharply after the sample enters the plastic stage. Therefore, AE ring-down counts, damage coefficient D, and calculated stress can be used as precursor information for failure of coal and rock, which has great significance for the further study of coal-rock material and for early hazard warning.
- Open Access
Research on the Nonlinear Characteristics of Acoustic Emission and Damage Mechanism of Gassy Coal under Unloading Conditions
Coal mining and production activities lead to static loading and unloading changes of coal stress in front of the working face, and the stress change process has a significant influence on the occurrence and development of coal-rock gas dynamic disasters. In this paper, the macroscopic failure characteristics, acoustic emission timing characteristics, and acoustic emission nonlinear characteristics of coal with different gas pressures under true triaxial loading and unloading conditions were experimentally studied. The results showed that the macroscopic failure form of coal with different gas pressures under unloading conditions was tensile-shear composite failure, and the crack structure was formed near the unloading surface. The fractal dimension and multifractal parameter of acoustic emission time series both could reflect the complexity of coal fracture process. With the increase of gas pressure, the fractal dimension and multifractal parameter decreased, which indicated that the greater the gas pressure, the lower the complexity of coal fracture process. Under different gas pressures, the dynamic change trends of multifractal parameter were similar, taking the beginning of unloading as the dividing point, the change was roughly in the form of “W.” When the stress state and failure form of coal body changed, the multifractal parameter changed synchronously, indicating that the change of could reflect the transformation process of failure mechanism of coal body under load to a certain extent, which was of great significance for clarifying the occurrence and development mechanism of coal-rock gas dynamic disasters and ensuring the safe production in underground coal mines.
Open AccessResearch on the Nonlinear Characteristics of Acoustic Emission and Damage Mechanism of Gassy Coal under Unloading Conditions
Coal mining and production activities lead to static loading and unloading changes of coal stress in front of the working face, and the stress change process has a significant influence on the occurrence and development of coal-rock gas dynamic disasters. In this paper, the macroscopic failure characteristics, acoustic emission timing characteristics, and acoustic emission nonlinear characteristics of coal with different gas pressures under true triaxial loading and unloading conditions were experimentally studied. The results showed that the macroscopic failure form of coal with different gas pressures under unloading conditions was tensile-shear composite failure, and the crack structure was formed near the unloading surface. The fractal dimension and multifractal parameter of acoustic emission time series both could reflect the complexity of coal fracture process. With the increase of gas pressure, the fractal dimension and multifractal parameter decreased, which indicated that the greater the gas pressure, the lower the complexity of coal fracture process. Under different gas pressures, the dynamic change trends of multifractal parameter were similar, taking the beginning of unloading as the dividing point, the change was roughly in the form of “W.” When the stress state and failure form of coal body changed, the multifractal parameter changed synchronously, indicating that the change of could reflect the transformation process of failure mechanism of coal body under load to a certain extent, which was of great significance for clarifying the occurrence and development mechanism of coal-rock gas dynamic disasters and ensuring the safe production in underground coal mines.
- 14 August 2020
- Published by World Scientific Pub Co Pte Ltd in Fractals
- Vol. 28 (05)
EXPERIMENTAL INVESTIGATION ON MULTI-FRACTAL CHARACTERISTICS OF ACOUSTIC EMISSION OF COAL SAMPLES SUBJECTED TO TRUE TRIAXIAL LOADING–UNLOADING
- 14 August 2020
- Published by World Scientific Pub Co Pte Ltd in Fractals
- Vol. 28 (05)
EXPERIMENTAL INVESTIGATION ON MULTI-FRACTAL CHARACTERISTICS OF ACOUSTIC EMISSION OF COAL SAMPLES SUBJECTED TO TRUE TRIAXIAL LOADING–UNLOADING